Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface orientation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

The surface orientation of some Apollo 14 rocks.

Detailed stereomicroscopic studies of the distribution of microcraters, soil covers, and glass coatings were performed to reconstruct the most recent surface orientations of selected Apollo 14 rocks. Surface orientations could be established for rocks 14053, 14073, 14301, 14303, 14307, 14310, and 14311 (which includes rock 14308). A tentative orientation of rock 14055 is suggested, and comments concerning the surface history of rocks 14302, 14305, and 14318 are presented. The examination of rocks 14066, 14306, and 14321 indicates that these specimens have complicated surface histories that prevent reconstruction of their orientation by the criteria that were established in these stereomicroscopic studies.

Hoerz, F.↗
NASA NTRS1973

Boiling heat transfer to LN2 and LH2 - Influence of surface orientation and reduced body forces

The quantitative determination of the influence of heater surface orientation and gravity on nucleate pool boiling of liquid nitrogen and liquid hydrogen is described. A transient calorimeter technique, well suited for obtaining pool boiling data under reduced gravity and used earlier by Clark and Merte (1963), was employed after being adapted to flat a surface whose orientation could be varied. The obtained determination results are reviewed.

Merte, H., Jr.↗
NASA NTRS1991

A force vector and surface orientation sensor for intelligent grasping

The paper discusses a force vector and surface orientation sensor suitable for intelligent grasping. The use of a novel four degree-of-freedom force vector robotic fingertip sensor allows efficient, real time intelligent grasping operations. The basis of sensing for intelligent grasping operations is presented and experimental results demonstrate the accuracy and ease of implementation of this approach.

Mcglasson, W. D.↗
NASA NTRS1989

The perception of three-dimensionality across continuous surfaces

The apparent three-dimensionality of a viewed surface presumably corresponds to several internal preceptual quantities, such as surface curvature, local surface orientation, and depth. These quantities are mathematically related for points within the silhouette bounds of a smooth, continuous surface. For instance, surface curvature is related to the rate of change of local surface orientation, and surface orientation is related to the local gradient of distance. It is not clear to what extent these 3D quantities are determined directly from image information rather than indirectly from mathematically related forms, by differentiation or by integration within boundary constraints. An open empirical question, for example, is to what extent surface curvature is perceived directly, and to what extent it is quantitative rather than qualitative. In addition to surface orientation and curvature, one derives an impression of depth, i.e., variations in apparent egocentric distance. A static orthographic image is essentially devoid of depth information, and any quantitative depth impression must be inferred from surface orientation and other sources. Such conversion of orientation to depth does appear to occur, and even to prevail over stereoscopic depth information under some circumstances.

Stevens, Kent A.↗
NASA NTRS1968

Study of Behavior of Sterols at Interfaces

Behavior of sterols and sterol acetates on various types of interfaces indicates that the function of a sterol depends upon a surface orientation and surface energy of the interface. Column-chromatographic techniques determine the retention volume of various sterols under standard conditions.

Klein, P. D.↗
NASA NTRS1986

Adhesion and wear resistance of materials

Recent studies into the nature of bonding at the interface between two solids in contact or a solid and deposited film have provided a better understanding of those properties important to the adhesive wear resistance of materials. Analytical and experimental progress are reviewed. For simple metal systems the adhesive bond forces are related to electronic wave function overlap. With metals in contact with nonmetals, molecular-orbital energy, and density of states, respectively can provide insight into adhesion and wear. Experimental results are presented which correlate adhesive forces measured between solids and the electronic surface structures. Orientation, surface reconstruction, surface segregation, adsorption are all shown to influence adhesive interfacial strength. The interrelationship between adhesion and the wear of the various materials as well as the life of coatings applied to substrates are discussed. Metallic systems addressed include simple metals and alloys and these materials in contact with themselves, both oxide and nonoxide ceramics, diamond, polymers, and inorganic coating compounds, h as diamondlike carbon.

Buckley, D. H.↗
NASA NTRS1980

Research in interactive scene analysis

The recovery of information about the three dimensional structure and physical characteristics of surfaces depicted in an image was studied focusing on two complementary problems: (1) basic techniques for inferring three dimensional surface shape from two dimensional images and (2) means for integrating the results of different techniques to obtain a globally consistent surface description. A technique was developed for constraining surface orientation along image contours that correspond to surface boundaries. A means for interpolating surface orientation estimates from a variety of sources into smooth surfaces--a major integration problem--was also developed. A computational model, based on these techniques, was proposed for inferring the three dimensional surface structure depicted in a line drawing.

Tenenbaum, J. M.↗
NASA NTRS1993

New meteoroid model predictions for directional impacts on LDEF

An extensive body of data, from meteors, zodiacal light, spacecraft-borne impact detectors (Helios, Pioneer, Galileo, Ulysses), and other sources, forms the basis of a new numerical model for the distributions of interplanetary meteoroids. For each of the five populations in this model it is possible to evaluate meteoroid concentration and flux for oriented surfaces or detectors having arbitrary position and velocity in interplanetary space. For a spacecraft in geocentric orbit the effects of gravitational focussing and shielding by the Earth have been newly derived with full attention to the directionality of the particles, both on approach (i.e., relative to a massless Earth) and at the target. This modeling approach was exercised to provide an estimate of meteoroid fluence for each of several oriented surfaces on LDEF.

Divine, Neil↗
NASA NTRS1992

New meteoroid model predictions for directional impacts on LDEF

An extensive body of data, from meteors, zodiacal light, spacecraft-borne impact detectors (helios, Pioneer, Galileo, and Ulysses), and other sources, forms the basis of a new numerical model for the distributions of interplanetary meteoroids. For each of the five populations in this model it is possible to evaluate meteoroid concentration and flux for oriented surfaces or detectors having arbitrary position and velocity in interplanetary space (Divine, 1992, in preparation). For a spacecraft in geocentric orbit, the effects of gravitational focusing and shielding by the Earth were derived with full attention to the directionality of the particles, both on approach (i.e., relative to a massless Earth) and at the target. This modeling approach was exercised to provide an estimate of meteoroid fluence for each of several oriented surfaces on the Long Duration Exposure Facility (LDEF).

Divine, Neil↗
NASA NTRS1992

Transient pool boiling in microgravity

Transient nucleate pool boiling experiments using R113 are conducted for short times in microgravity and in earth gravity with different heater surface orientations and subcoolings. The heating surface is a transparent gold film sputtered on a quartz substrate, which simultaneously provides surface temperature measurements and permits viewing of the boiling process from beneath. For the microgravity experiments, which have uniform initial temperatures and no fluid motion, the temperature distribution in the R 113 at the moment of boiling inception is known. High speed cameras with views both across and through the heating surface record the boiling spread across the heater surface, which is classified into six distinct categories.

Ervin, J. S.↗
NASA NTRS1967

Self-decoration effect in lithium ferrite.

Self-decoration effect in thermally etched polycrystalline lithium ferrite, discussing geometric symmetry relation to crystallographic surface orientation

CRYSTAL SURFACE↗
NASA NTRS1992

Distributed optical proximity sensor system - HexEYE

A novel optical proximity sensor system, capable of measuring the distance to the orientation and the discontinuity at a local area of an object surface, was designed and evaluated for robotic applications. The sensor system gets its name, Hexagonal Eye, (HexEYE) from its shape where seven identical hexagonal sensing units were configured hexagonally into a compact geometric structure. The seven sensing units were grouped into multiple combinations of three sensing units to measure the surface orientation as well as surface discontinuity. The distinctive features of HexEYE are an order of magnitude increased in distance sensitivity by optimizing the curvature of a conical mirror, the enhanced measurement accuracy based on multiple levels of sensor fusion, and the compactness in size due to a sensing mechanism based on the Gaussian lens law. A prototype of single sensing unit has been built and was evaluated experimentally.

Lee, Sukhan↗
NASA NTRS1974

Lunar surface phenomena - Solar flare track gradients, microcraters, and accretionary particles

Data are presented concerning the energy spectra of solar flare particles and the distribution of particles producing submicron diameter craters. Processes which alter the albedo and possibly the chemistry of exposed lunar surfaces are also considered. Measurements are reported of solar flare track gradients in rock 64455 which is sufficiently young to have uneroded surfaces on its sides. Attention is also given to accretionary particles adhering to host surfaces, microcraters on soil particles, and microcraters on the oriented surfaces of sample 76015 from a boulder at Station 6 of the Apollo 17 site.

Blanford, G. E.↗
NASA NTRS1976

The metal to metal interface and its effect on adhesion and friction

The paper considers the interface between two bulk metals and the effect of this interface on adhesive bonding, resistance to tangential displacements, friction and the interfacial transport from one surface to another. Using Auger emission spectroscopy, field ion microscopy, and low energy electron diffraction techniques, the influence of surface orientation, lattice registry, crystal lattice structure and defects, metal surface chemistry and alloying on the characteristics of the interface was studied for noble, platinum, transition, and Group 4B metals. With dissimilar metals in contact, epitaxial transfer of the cohesively weaker to the cohesively stronger metal has been observed. Surface chemical activity of the noble and platinum metals is shown to affect interfacial behavior as does a valence bonding in the transition metals, and the degree of metallic nature in the Group 4B elements. Alloying elements, e.g., Si and Fe, can alter interfacial behavior by segregation to the surface of metals or by altering bulk properties such as crystal transformation kinetics.

Buckley, D. H.↗
NASA NTRS1986

Sputtering and native oxide formation on (110) surfaces of Cd(1-x)Mn(x)Te

Native oxides on the surface of Cd(1-x)Mn(x)Te (X between 0 and 0.7) have been analyzed on the basis of X-ray photoemission spectroscopy measurements. Depth profile analysis revealed a significant increase in the thickness at higher Mn concentrations and a strong Mn segregation to the surface, respectively. Sputter-induced damage on cleaved (110)-oriented surfaces was analyzed by photoreflectance and photoluminescence measurements. The damage was found to be larger on CdTe than on the alloy. Thermal annealing showed nearly complete restoration for the surface of the alloy, while CdTe revealed irreversible modifications in the near-surface regime upon sputtering and post annealing.

Neff, H.↗