Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface orientation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Effects of Surface Orientation and Termination Plane on Glass‐to‐Crystal Transformation of Lithium Disilicate by Molecular Dynamics Simulations

Glass‐to‐crystal transformation of lithium disilicate is studied using molecular dynamics simulations using an effective partial charge potential. The structural evolution of the interface between glassy and crystalline lithium disilicate is analyzed to simulate crystallization of glass on pre‐existing crystal seeds. Besides previously used atomic number density, the distribution of Q n species (Si tetrahedra with n bridging oxygen) is shown to be an effective parameter for following this transformation quantitatively. The early stages of crystal growth are significantly affected by the orientation and termination of the surface of adjacent crystal, as indicated by calculated atomic density, partial ordering, atomic segregation, and an increase in Q 3 concentration. In particular, under‐coordinated Si within the outer crystal layer is found to be most effective in transforming the amorphous structure toward crystallinity. The increase in Q 3 in the glass close to interface region most clearly shows the initial stage of lithium disilicate crystal growth.

Sun, Wei↗
DOE OSTI2025

Surface orientation ambiguity for single molecules at dielectric interfaces

Fluorescent molecules emit light in a dipole radiation pattern that can be used to infer their orientation through defocused fluorescence microscopy. Proper measurement of the orientation requires mathematical modeling of the radiation pattern expected for a dipole in the geometry of interest and subsequent comparison against experimental data. We point out an ambiguity in common calculations of these patterns that appears to compromise orientation measurements for molecules that are especially near dielectric surfaces. This results in a rotation of the measured emission dipole toward the surface for near-interface molecules, which can be mistaken for a preferentially horizontal orientation among the emitters. The proper treatment for on-surface emitters requires consideration of finite-sized current elements between two dielectric media, and we show that the theoretical ambiguity can be lifted via finite-element modeling. A prescription is provided for correcting measured orientations at arbitrary interfaces.

Dey, E. [University of Texas, Arlington, TX (Unite↗
DOE OSTI2020

Build orientation, surface roughness, and scan path influence on the microstructure, mechanical properties, and flexural fatigue behavior of Ti–6Al–4V fabricated by electron beam melting

In the present work, microstructure and fatigue behavior of Electron Beam Melted (EBM) Ti–6Al–4V have been systematically studied. Fatigue behavior was investigated using four-point bend tests of rectangular bars with internal features fabricated with different build orientations, scan paths, and surface conditions. Microstructural variations were evaluated by optical microscopy and Vickers micro-hardness indentations, both of which were found to be consistent throughout the build and within ranges reported in the literature. The fatigue performance of the EBM material was comparable to wrought Ti–6Al–4V when the loading direction was parallel to the build direction, but severely limited when loaded perpendicular to the build direction or if surface roughness defects were present. Scanning electron microscopy and interrupted fatigue tests were utilized to characterize fracture surfaces, failure mechanisms, crack initiation, and propagation behavior. Crack initiation sites in the vertically-oriented specimens were identified to be melt-related defects formed by insufficient melting.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Rotation of electrothermal-instability-driven overheating structure due to helically oriented surface magnetic field on a high-current-density aluminum rod

Experiments on the 1-MA, 100-ns-rise-time Mykonos Facility demonstrate rotation of electrothermal instability (ETI)-driven overheating structure on 1.00-mm-diameter, 10-nm-surface roughness, 99.999%-pure aluminum rods, which are pulsed with helically polarized surface magnetic field. Rods are machined to include pairs of 10-micron-scale quasi-hemispherical voids or “engineered defects (ED)” which provide the dominant current density perturbation from which ETI grows most rapidly. Experiments include an axial magnetic field component through the addition of a helically wound return-current electrode or “helical return can (HRC).” For a given HRC design, azimuthal field (B ɵ ) and axial field (B z ) components rise at a prescribed and fixed ratio, driving an increasing magnetic field of constant polarization at the rod's surface; most experiments generated surface magnetic field at a 15-degree field polarization angle (from horizontal) defined as ɸ B = arctan(B z /B ɵ ). ETI-driven emission patterns from individual ED are observed to rotate along ɸ B , while emission patterns from dielectric-coated ED pairs are shown to elongate and preferentially merge along ɸ B , in qualitative agreement with 3D-magnetohydrodynamic simulations. These data strongly support that for a randomized distribution of current density perturbations on a high-current density conductor, nearby perturbations will favorably merge about ɸ B , with the degree of merging increasing with current. Such observations offer fundamental new understanding of the seeding mechanisms of the helical magneto-Rayleigh Taylor (MRT) instabilities observed from axially magnetized magnetically driven imploding liners.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Deposition control of model glasses with surface-mediated orientational order

We introduce a minimal model of solid-forming anisotropic molecules that displays, in thermal equilibrium, surface orientational order without bulk orientational order. The model reproduces the nonequilibrium behavior of recent experiments in which a bulk nonequilibrium structure grown by deposition contains regions of orientational order characteristic of the surface equilibrium. This order is deposited, in general, in a nonuniform way because of the emergence of a growth-poisoning mechanism that causes equilibrated surfaces to grow slower than non-equilibrated surfaces. We use evolutionary methods to design oscillatory protocols able to grow nonequilibrium structures with uniform order, demonstrating the potential of protocol design for the fabrication of this class of materials.

Whitelam, Stephen (ORCID:0000000200866803)↗
DOE OSTI2024

Structural anisotropy in Sb thin films

Sb thin films have attracted wide interest due to their tunable band structure, topological phases, high electron mobility, and thermoelectric properties. We successfully grow epitaxial Sb thin films on a closely lattice-matched GaSb(001) surface by molecular beam epitaxy. We find a novel anisotropic directional dependence on their structural, morphological, and electronic properties. The origin of the anisotropic features is elucidated using first-principles density functional theory (DFT) calculations. The growth regime of crystalline and amorphous Sb thin films was determined by mapping the surface reconstruction phase diagram of the GaSb(001) surface under Sb 2 flux, with confirmation of structural characterizations. Crystalline Sb thin films show a rhombohedral crystal structure along the rhombohedral (211) surface orientation parallel to the cubic (001) surface orientation of the GaSb substrate. At this coherent interface, Sb atoms are aligned with the GaSb lattice along the [1̄10] crystallographic direction but are not aligned well along the [110] crystallographic direction, which results in anisotropic features in reflection of high-energy electron diffraction patterns, misfit dislocation formation, surface morphology, and transport properties. Our DFT calculations show that the preferential orientation of the rhombohedral Sb (211) plane may originate from the GaSb surface, where Sb atoms align with the Ga and Sb atoms on the reconstructed surface. The formation energy calculations confirm the stability of the experimentally observed structures. Our results provide optimal film growth conditions for further studies of novel properties of Bi 1-x Sb x thin films with similar lattice parameters and an identical crystal structure, as well as functional heterostructures of them with III–V semiconductor layers along the (001) surface orientation, supported by a theoretical understanding of the anisotropic film orientation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Invariant surface elastic properties in FCC metals and their correlation to bulk properties revealed by machine learning methods

In this work, we present a combination of machine-learned models that predicts the surface elastic properties of general free surfaces in face-centered cubic (FCC) metals. These models are built by combining a semi-analytical method based on atomistic simulations to calculate surface properties with the artificial neural network (ANN) method or the boosted regression tree (BRT) method. The latter is also used to link bulk properties and surface orientation to surface properties. The surface elastic properties are represented by their invariants considering plane elasticity within a polar method. The resulting models are shown to accurately predict the surface elastic properties of seven pure FCC metals (Cu, Ni, Ag, Au, Al, Pd, Pt). The BRT model reveals the correlations between bulk and corresponding surface properties in terms of invariants, which can be used to guide the design of complex nano-sized particles, wires and films. Finally, by expressing the surface excess energy density as a function of surface elastic invariants, fast predictions of surface energy as a function of in-plane deformations can be made from these model constructs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Polycrystalline Pd Surface Studied by Two-Dimensional Surface Optical Reflectance during CO Oxidation: Bridging the Materials Gap

Industrial catalysts are complex materials systems operating in harsh environments. The active parts of the catalysts are nanoparticles that expose different facets with different surface orientations at which the catalytic reactions occur. However, these facets are close to impossible to study in detail under industrially relevant operating conditions. Instead, simpler model systems, such as single crystals with a well-defined surface orientation, have been successfully used to study gas–surface interactions such as adsorption and desorption, surface oxidation, and oxidation/reduction reactions. To more closely mimic the many facets exhibited by nanoparticles and thereby close the so-called materials gap, there has also been a recent move toward using polycrystalline surfaces and curved crystals. However, these studies are limited either by the pressure or spatial resolution at realistic pressures or by the number of surfaces studied simultaneously. In this work, we demonstrate the use of reflectance microscopy to study a vast number of catalytically active surfaces simultaneously under realistic and identical reaction conditions. As a proof of concept, we have conducted an operando experiment to study CO oxidation over a Pd polycrystal, where the polycrystalline surface acts as a collection of many single-crystal surfaces. Finally, we visualized the resulting data by plotting the reflectivity as a function of surface orientation. We think the techniques and visualization methods introduced in this work will be key toward bridging the materials gap in catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Probing crystallographic orientation-specific carrier lifetimes in epitaxial Ge/AlAs and InGaAs/InP heterostructures

Current silicon (Si) fin transistors rely on (100) and (110) crystallographically oriented surfaces, and the proposed alternate channel transistor technology comprises materials with higher mobility than Si. Crystallographically oriented epitaxial germanium (Ge) and indium–gallium arsenide (InGaAs) have the potential to replace Si in ultra-low power transistor applications. The higher carrier lifetime is an indication of superior material quality, which relates to the leakage current of a fin transistor. To gain insights into the carrier recombination dynamics in these crystallographically oriented epitaxial Ge and InGaAs layers, the contactless microwave photoconductive decay (μ-PCD) technique at an excitation wavelength of 1500 nm was employed to probe the orientation-specific carrier lifetimes. Highly effective carrier lifetimes >200 ns for (100)Ge/AlAs and (110)Ge/AlAs, and ~80 ns for (111)Ge/AlAs heterostructures, were extracted at room temperature. The measured carrier lifetime has a strong dependence on the surface orientation, which could be related to orientation-specific bulk trap states present within the bandgap of Ge. The (111)Ge orientation has 3 times lower carrier lifetime compared to the (100)Ge and (110)Ge surface orientations. On the other hand, the carrier lifetimes of 125 μs and 10 ns were determined from (100)InGaAs/InP and (110)InGaAs/InP heterostructures, respectively. The reduction in carrier lifetimes in both (111)Ge and (110)InGaAs was due to high electrical conductivity or higher bulk trap states present within the bandgap as well as the facet-dependent growth of the (110)InGaAs layer on InP. A surface passivating layer is indispensable for these orientation-specific epitaxial layers to improve the carrier lifetime. Therefore, the higher carrier lifetimes from technologically interesting (100)Ge and (110)Ge surfaces would offer a path for the development of Ge-based ultra-low power electronics, and optoelectronic devices based on the (100)InGaAs layer.

36 MATERIALS SCIENCE↗
DOE OSTI2020

First-principles study of the surface properties of uranium carbides

Uranium carbides have attracted renewed interest as advanced nuclear fuels for Generation IV reactors. As an important property required for gas bubble modeling in nuclear fuels, the surface energy of uranium carbides is scarce in literature. In this work, we study the surface properties of uranium carbides by first-principles density functional theory calculations. Surface orientations with maximum Miller index up to 3, 2 and 2 are investigated for UC, U 2 C 3 and α-UC 2 , respectively. By studying the effects of surface termination and chemical potential on surface energy, we identify the factors that determines the surface stability. From the calculated surface energies, the surface properties of uranium carbide single crystals are obtained from Wulff construction, including equilibrium morphology, dominant surface orientation and area weighted surface energy.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Platinum Surface Water Orientation Dictates Hydrogen Evolution Reaction Kinetics in Alkaline Media

The fundamental understanding of sluggish hydrogen evolution reaction (HER) kinetics on a platinum (Pt) surface in alkaline media is a topic of considerable debate. Herein, we combine cyclic voltammetry (CV) and electrical transport spectroscopy (ETS) approaches to probe the Pt surface at different pH values and develop molecular-level insights into the pH-dependent HER kinetics in alkaline media. The change in HER Tafel slope from ~110 mV/decade in pH 7–10 to ~53 mV/decade in pH 11–13 suggests considerably enhanced kinetics at higher pH. The ETS studies reveal a similar pH-dependent switch in the ETS conductance signal at around pH 10, suggesting a notable change of surface adsorbates. Fixed-potential calculations and chemical bonding analysis suggest that this switch is attributed to a change in interfacial water orientation, shifting from primarily an O-down configuration below pH 10 to a H-down configuration above pH 10. This reorientation weakens the O–H bond in the interfacial water molecules and modifies the reaction pathway, leading to considerably accelerated HER kinetics at higher pH. Finally, our integrated studies provide an unprecedented molecular-level understanding of the nontrivial pH-dependent HER kinetics in alkaline media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Crystal truncation rods from miscut surfaces with alternating terminations

Miscut surfaces of layered crystals can exhibit a stair-like sequence of terraces having periodic variation in their atomic structure. For hexagonal close-packed and related crystal structures with an αβαβ stacking sequence, there have been long-standing questions regarding how the differences in adatom attachment kinetics at the steps separating the terraces affect the fractional coverage of α vs. β termination during crystal growth. To demonstrate how surface X-ray scattering can help address these questions, we develop a general theory for the intensity distributions along crystal truncation rods (CTRs) for miscut surfaces with a combination of two terminations. We consider half-unit-cell-height steps, and variation of the coverages of the terraces above each step. Example calculations are presented for the GaN (0001) surface with various reconstructions. These show which CTR positions are most sensitive to the fractional coverage of the two terminations. We compare the CTR profiles for exactly oriented surfaces to those for vicinal surfaces having a small miscut angle, and investigate the circumstances under which the CTR profile for an exactly oriented surface is equal to the sum of the intensities of the corresponding family of CTRs for a miscut surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Structure Sensitive Reaction Kinetics of Chiral Molecules on Intrinsically Chiral Surfaces

Enantiospecific heterogeneous catalysis utilizes chiral surfaces to resolve enantiomers via structure sensitive surface chemistry. The catalyst design challenge is the identification of chiral surface structures that maximize enantiospecificity. Herein, we develop data driven models for the enantiospecificity of tartaric acid reactions on chiral Cu(hkl) R&S surfaces. Measurements of enantiospecific rate constants were obtained by using curved Cu(hkl) R&S surfaces that enable kinetic measurements on hundreds of chiral surface orientations. One model uses feature vectors derived from generalized coordination numbers to capture the local structure around Cu atoms exposed by the Cu(hkl) R&S surfaces. The second model introduces the use of chiral cubic harmonic functions to capture the symmetry constraints of the face-centered cubic Cu structure. The model using 58 generalized coordination numbers has a fitting error similar to that of the model using only 5 cubic harmonic functions. The two models predict maxima in the enantiospecificity on surfaces with very similar surface orientations. The models developed in this work are applicable for any enantiospecific reaction happening on any chiral material with a cubic lattice structure, opening the way to understanding the surface structure sensitivity of the enantiospecific reaction kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Fabrication of anodic aluminum oxide on silica optical fiber with nanopore channels oriented off surface normal

Abstract Aluminum coating on silica optical fiber was anodized by applying an electric field off‐axis to surface normal of the fiber coating with simulation of the electric field lines between angularly positioned anode and cathode as a guide. The nanostructure features, including nanopore orientation, of the resultant anodized aluminum oxide (AAO) were characterized using scanning electron microscopy. This unique off‐axis electric field arrangement enabled the formation of AAO with uniformly tilted nanopore channel arrays. Nanopore channels with tilting angles around 10°–20° relative to surface normal of AAO were obtained. These results are in general agreement with the simulated electric field lines between the anode and cathode.

Materials Science↗
DOE OSTI2026

Pseudocapacitive Titanium Oxynitride Nanowires for Ultrahigh Capacitance Supercapacitors

High-quality, multifunctional two-dimensional (2D) titanium oxynitide (TiNO) thin films and one-dimensional (1D) TiNO nanowires have been synthesized using a pulsed laser deposition, a simple, fast, and congruent evaporation method. First-principles calculations as a function of surface orientation and termination indicate that surface oxidation of TiNO nanowires can stabilize the (110) orientation observed experimentally. The specific capacitance value for the TiNO nanowire samples (2725 mF/cm 2 ) has been found to be nearly six times more than that of the TiNO thin film samples (400 mF/cm 2 ), which is attributed to the high packing density of TiNO nanowires over a given area. The nanowire samples have also been found to exhibit a significantly higher energy density (1.35 μWh/cm 2 ) than the TiNO thin-film samples (0.33 μWh/cm 2 ). Thus, the TiNO material system in thin-film and nanowire forms has been demonstrated to be a promising candidate for use as an electrode material in supercapacitors and other charge-storage applications.

capacitors↗
DOE OSTI2021

Modulating the Surface Ligand Orientation for Stabilized Anionic Redox in Li‐Rich Oxide Cathodes

Abstract Anionic redox chemistry is emerging as a key concept in the development of high‐energy lithium‐ion batteries, as it enables a nearly doubled charge storage capacity, aiding the development of high‐capacity batteries. However, the anionic reactivity is frequently irreversible from charge to discharge, leading to rapid decay of the capacity and voltage of batteries over long‐term cycling. Although the possibility of controlling the anionic redox reactions by tuning the geometric and electronic structures has recently been proposed, the implementation of this strategy is still a critical challenge. Herein, a strategy is proposed to improve the anionic redox reversibility of a model anionic redox active cathode material, Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 , by tuning the surface ligand geometry via the growth of a lattice‐compatible spinel LiCoO 2 coating layer on the particle surface. Detailed local structure and first principles investigations reveal that the shape and orientation of the octahedral layer in the host lattice are modified. Accordingly, a two‐band oxygen redox behavior is triggered in the ligand‐orientation‐regulated Li‐rich cathode, leading to enhanced reversibility, and thus, remarkably improved capacity and voltage retention over cycling. This study highlights the importance of controllable ligand orientation, carving a new path for the development and design of Li‐rich cathodes in the future.

Liu, Yanchen↗