Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

An investigation of surface parameter estimation from surface models

In surface scattering problems, scattering models are used to estimate the surface parameters by comparing model predictions to data. The meaning of such a procedure is examined using computer simulated scattering data from statistically known surfaces. Numerically exact scattering computations based on the moment method are conducted, and standard surface scattering models are applied to these simulated data. It is shown that such an approach usually leads to effective surface parameters as opposed to real surface parameters, except for a limited frequency region. It is also shown that if a surface scattering model is valid over all frequencies, then it is possible to recover the real surface parameters regardless of whether the surface is single scale or two scale.

Fung, A. K.↗
NASA NTRS1994

An evaluation with the Fourier Amplitude Sensitivity Test (FAST) of which land-surface parameters are of greatest importance in atmospheric modeling

Land-surface parameterizations based on a statistical-dynamical have been suggested recently to improve the representation of the surface forcing from heterogeneous land in atmospheric models. With this approach, land-surface characteristics are prescribed by probability density functions (PDFs) rather than single 'representative' values as in 'big-leaf' parameterizations. Yet the use of many PDFs results in an increased computational burden and requires the complex problem of representing covariances between PDFs to be addressed. In this study, a sensitivity analysis of a land-surface parameterization for atmospheric modeling was performed to evaluate the surface parameters most important to the variability of surface heat fluxes. The Fourier amplitude sensitivity test (FAST) used for this analysis determines the relative contribution of individual input parameters to the variance of energy fluxes resulting from a heterogeneous surface. By simultaneously varying all parameters according to their individual probability density functions, the number of computations needed is very much reduced by this technique. This analysis demonstrates that most of the variability of surface heat fluxes may be described by the distributions of relative stomatal conductance and surface roughness. Thus, the statistical-dynamical approach may be simplified by the use of only these two probability density functions.

Collins, Dan C.↗
NASA NTRS1993

Simulated retrieval of land surface parameters using multichannel satellite microwave radiometry

The current global change research emphasis on understanding water and energy fluxes at the land-atmosphere interface provided renewed interest in using passive microwave satellite data for land studies. Radiative transfer models of microwave emission and scattering in the soil-vegetation-atmosphere column, though still in the process of development, can be used to estimate the accuracies with which land surface parameters can be derived from satellite data. These parameters include surface soil moisture, surface temperature, vegetation water content, and atmospheric water content. A microwave radiative transfer model is used to develop linear and nonlinear versions of a multichannel retrieval algorithm to simulate retrievals of the surface and atmospheric parameters. These simulations include the effect of additive noise, and examine the effects of nonlinearities in the radiative transfer models. However, effects of spatial heterogeneity are not considered. Satellite data to which the retrieval algorithms may be applied include the SSMR and SSM/I, and in future will include the Multifrequency Imaging Microwave Radiometer (MIMR) to be launched as part of the Earth Observing System (EOS). The Scanning Multichannel Microwave Radiometer (SMMR) on the Nimbus-7 satellite provided data from 1978 to 1987 at five microwave frequencies between 6.6 and 37 GHz. The series of Special Sensor Microwave/Imager (SSM/I) instruments launched on the DMSP satellites provide data from 1987 to the present at four frequencies between 19.35 and 8.5 GHz. Spatial resolutions of the data range from approximately 12 to 120 km depending on the frequency. Examples using data from these sensors are shown to indicate the results of applying retrieval algorithms based on model simulations to real data.

Njoku, Eni G.↗
NASA NTRS1982

A method for diagnosing surface parameters using geostationary satellite imagery and a boundary-layer model

A method for diagnosing surface parameters on a regional scale via geosynchronous satellite imagery is presented. Moisture availability, thermal inertia, atmospheric heat flux, and total evaporation are determined from three infrared images obtained from the Geostationary Operational Environmental Satellite (GOES). Three GOES images (early morning, midafternoon, and night) are obtained from computer tape. Two temperature-difference images are then created. The boundary-layer model is run, and its output is inverted via cubic regression equations. The satellite imagery is efficiently converted into output-variable fields. All computations are executed on a PDP 11/34 minicomputer. Output fields can be produced within one hour of the availability of aligned satellite subimages of a target area.

Polansky, A. C.↗
NASA NTRS1975

Application of the MOS-C-V technique to determine impurity concentrations and surface parameters on the diffused face of silicon solar cells

The feasibility of using the MOS C-V technique to obtain information regarding impurity and surface state concentrations on the diffused face of silicon solar cells with Ta2O5 coatings is studied. Results indicate that the MOS C-V technique yields useful information concerning surface parameters which contribute to the high, efficiency limiting, surface recombination velocities on the n+ surface of silicon solar cells.

Weinberg, I.↗
NASA NTRS2010

Development of an AQUA Based Near-Surface Parameter Retrieval

The production of a satellite based turbulent surface flux product relies critically upon the near-surface input parameters. Development of retrieval algorithms for the necessary near-surface variables of wind speed, specific humidity, air temperature, and sea surface temperature has proceeded relatively independent of each another until recently. The use of a neural network approach using Special Sensor Microwave/Imager (SSM/I) data in conjunction with a first guess sea surface temperature has led to successful retrieval of all parameters simultaneously. However, SSM/I frequencies lack inherent sensitivity to the sea surface temperature (SST). Recent studies have found improved air temperature and humidity retrievals can be obtained via inclusion of microwave sounding channels weighted in the lower troposphere. The inclusion of SSM/I-like frequencies as well as SST-sensitive microwave channels on AMSR-E along with AMSU-A sounding data onboard the AQUA platform provides an unique opportunity. That is the ability to provide near-simultaneous (in space and time) measurements allowing the retrieval of all the near-surface variables, including SST. This study shows results of a new algorithm designed to take advantage of the unique sampling ability of AQUA based sensors. Results from a neural network based methodology will be shown as compared to in-situ based observations of near-surface variables. Implications for creation of an AQUA based turbulent surface product are also discussed.

Roberts, Brent↗
NASA NTRS2012

Aerosol and Surface Parameter Retrievals for a Multi-Angle, Multiband Spectrometer

This software retrieves the surface and atmosphere parameters of multi-angle, multiband spectra. The synthetic spectra are generated by applying the modified Rahman-Pinty-Verstraete Bidirectional Reflectance Distribution Function (BRDF) model, and a single-scattering dominated atmosphere model to surface reflectance data from Multiangle Imaging SpectroRadiometer (MISR). The aerosol physical model uses a single scattering approximation using Rayleigh scattering molecules, and Henyey-Greenstein aerosols. The surface and atmosphere parameters of the models are retrieved using the Lavenberg-Marquardt algorithm. The software can retrieve the surface and atmosphere parameters with two different scales. The surface parameters are retrieved pixel-by-pixel while the atmosphere parameters are retrieved for a group of pixels where the same atmosphere model parameters are applied. This two-scale approach allows one to select the natural scale of the atmosphere properties relative to surface properties. The software also takes advantage of an intelligent initial condition given by the solution of the neighbor pixels.

Broderick, Daniel↗
NASA NTRSDate not supplied

MISR Level 2 Surface parameters (MIL2ASLS_V1)

The Land Surface data include bihemispherical and directional-hemispherical reflectances (albedo), hemispherical directional and bidirectional reflectance factors (BRF), BRF model parameters, leaf-area index (LAI), fraction of photosynthetically active radiation (FPAR), and normalized difference vegetation index (NDVI) on a 1.1 km grid. The land surface data include hemispherical directional reflectance factor, bihemispherical reflectance (i.e., albedo), bidirectional reflectance factor, directional hemispherical reflectance, BRF model parameters, FPAR, and terrain-referenced view and illumination angles. [Location=GLOBAL LAND] [Temporal_Coverage: Start_Date=2000-02-24; Stop_Date=] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=1.1 km - 17.6 km; Longitude_Resolution=1.1 km - 17.6 km; Horizontal_Resolution_Range=1 km - < 10 km or approximately .01 degree - < .09 degree; Temporal_Resolution=about 15 orbits/day].

DIRECTIONAL HEMISPHERICAL REFLECTANCE↗
NASA NTRSDate not supplied

MISR Level 2 Surface parameters (MIL2ASLS_V2)

The Land Surface data include bihemispherical and directional-hemispherical reflectances (albedo), hemispherical directional and bidirectional reflectance factors (BRF), BRF model parameters, leaf-area index (LAI), fraction of photosynthetically active radiation (FPAR), and normalized difference vegetation index (NDVI) on a 1.1 km grid. The land surface data include hemispherical directional reflectance factor, bihemispherical reflectance (i.e., albedo), bidirectional reflectance factor, directional hemispherical reflectance, BRF model parameters, FPAR, and terrain-referenced view and illumination angles. [Location=GLOBAL LAND] [Temporal_Coverage: Start_Date=2000-02-24; Stop_Date=] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=1.1 km - 17.6 km; Longitude_Resolution=1.1 km - 17.6 km; Horizontal_Resolution_Range=1 km - < 10 km or approximately .01 degree - < .09 degree; Temporal_Resolution=about 15 orbits/day; Temporal_Resolution_Range=Daily - < Weekly, Daily - < Weekly].

BIDIRECTIONAL REFLECTANCE FACTOR↗
NASA NTRS1987

Measurement from satellites of land surface parameters and fluxes in the thermal infrared bands: Problems and methods

The main problems arising in the elaboration of accurate and reliable algorithms for extracting land surface parameters and flux from their measured radiances are discussed. Methods of solution in the thermal infrared spectral domain are described. Particular interest is given to the inversion of thermal models and to the problems resulting from the heterogeneity of the observed surfaces.

Becker, F.↗
NASA NTRS2011

Multi-Axis Identifiability Using Single-Surface Parameter Estimation Maneuvers on the X-48B Blended Wing Body

The problem of parameter estimation on hybrid-wing-body type aircraft is complicated by the fact that many design candidates for such aircraft involve a large number of aero- dynamic control effectors that act in coplanar motion. This fact adds to the complexity already present in the parameter estimation problem for any aircraft with a closed-loop control system. Decorrelation of system inputs must be performed in order to ascertain individual surface derivatives with any sort of mathematical confidence. Non-standard control surface configurations, such as clamshell surfaces and drag-rudder modes, further complicate the modeling task. In this paper, asymmetric, single-surface maneuvers are used to excite multiple axes of aircraft motion simultaneously. Time history reconstructions of the moment coefficients computed by the solved regression models are then compared to each other in order to assess relative model accuracy. The reduced flight-test time required for inner surface parameter estimation using multi-axis methods was found to come at the cost of slightly reduced accuracy and statistical confidence for linear regression methods. Since the multi-axis maneuvers captured parameter estimates similar to both longitudinal and lateral-directional maneuvers combined, the number of test points required for the inner, aileron-like surfaces could in theory have been reduced by 50%. While trends were similar, however, individual parameters as estimated by a multi-axis model were typically different by an average absolute difference of roughly 15-20%, with decreased statistical significance, than those estimated by a single-axis model. The multi-axis model exhibited an increase in overall fit error of roughly 1-5% for the linear regression estimates with respect to the single-axis model, when applied to flight data designed for each, respectively.

Ratnayake, Nalin A.↗
NASA NTRS1985

Remote sensing of atmospheric and surface parameters from HIRS2/MSU on TIROS-N

At the Goddard Laboratory for Atmospheric Sciences (GLAS) a physically based satellite temperature sounding retrieval system was developed, involving the simultaneous analysis of sounding data, for determining atmospheric and surface conditions that are consistent with the observed radiances. In addition to determining accurate atmospheric temperature profiles even in the presence of clouds, the system provides global estimates of day and night sea or land surface temperatures, snow and ice cover, cloud amounts, cloudtop heights and temperatures, and albedo. The characteristics of the atmospheric and surface parameters derived from the GLAS Physical Retrieval System are reviewed, results for the FGGE year are presented and, whenever possible, compared with other measurements of the same fields. Some of the model-derived diagnostic fields available from the GLAS Analysis/Forecast System are also discussed. These fields may lead to more accurate determination of the source terms of the atmospheric heat and moisture budgets.

Susskind, J.↗