Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Growth of Well-Defined Model Catalysts for Electrochemistry: From Surface Science Studies to Electrocatalytic CO2 Conversion

We combined ultrahigh vacuum (UHV) surface science techniques, electrochemical measurements, and computational modeling to investigate electrocatalytic systems that are crucial components of the carbon management effort, including oxygen evolution reactions (OER) and CO2 reduction reactions (CO2RR). Well-defined Model catalysts were grown on substrates in the UHV chamber and characterized with X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM). Selected model electrocatalysts were then tested in electrochemical cells to establish the structure-property relationships in OER and CO2RR. Our results showed that the edge sites of Fe2O3 grown on Au(111) were the most active toward OER and incorporation of Ni at the edge sites (NiFeOx) further boosted their OER activity. We also resolved the size-dependent electrocatalytic CO2-to-CO conversion of the Ag nanoparticle electrocatalysts with average particle diameter between 2 to 6 nm: smaller diameter (< 3 nm) particles favored H2 evolution reaction (HER) due to a high population of Ag edge sites, whereas larger diameter particles favored CO2RR as the population of Ag(100) surface sites grew. We further discovered that electronic interactions between small diameter Ag particles and highly defective carbon supports could break the size-dependent CO2RR selectivity, resulting in highly selective (CO Faradaic Efficiency > 90%) and active Ag nanoparticle electrocatalysts with sizes < 2 nm diameter.

Deng, Xingyi↗
DOE OSTI2025

Atomic Layer Deposition (ALD) of Metal and Metal Oxide Films: A Surface Science Study (Final Report)

This is the final report for this project. The long-term objective of our project is to develop a general molecular-level picture of the surface chemistry associated with ALD processes. Our central hypothesis is that the chemistry of ALD precursors can differ significantly from that seen in solution. Awareness of such differences should provide general guidelines on what to watch for when synthesizing new ALD precursors and designing and optimizing new ALD processes, especially in terms of minimizing the incorporation of impurities in the growing films and of carrying out depositions under mild pressure and temperature conditions. The main objective of our research project has been to advance the fundamental knowledge of the surface chemistry of ALD precursors needed for the design and optimization of film deposition processes. A modern surface-science approach has been implemented to both elucidate the mechanism of the reactions of the precursors on the surface and characterize the composition and morphology of the growing films.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Atomic Layer Deposition (ALD) of Metal and Metal Oxide Films: A Surface Science Study (Final Report)

This is the final report for this project. The long-term objective of our project is to develop a general molecular-level picture of the surface chemistry associated with ALD processes. Our central hypothesis is that the chemistry of ALD precursors can differ significantly from that seen in solution. Awareness of such differences should provide general guidelines on what to watch for when synthesizing new ALD precursors and designing and optimizing new ALD processes, especially in terms of minimizing the incorporation of impurities in the growing films and of carrying out depositions under mild pressure and temperature conditions. The main objective of our research project has been to advance the fundamental knowledge of the surface chemistry of ALD precursors needed for the design and optimization of film deposition processes. A modern surface-science approach has been implemented to both elucidate the mechanism of the reactions of the precursors on the surface and characterize the composition and morphology of the growing films. In general, emphasis is being placed on: • Identifying the primary reactions that may lead to the deposition of clean films; •Identifying the secondary reactions that may help the ALD process, by, for instance, helping with the reduction (or oxidation) of the metal atom; • Identifying the secondary reactions that may lead to the deposition of undesirable impurities in the growing films; • Determining the kinetic parameters of the relevant surface reactions in order to define the optimum conditions for film deposition and to minimize impurity deposition. • Characterizing the nature of the resulting films, with focus on their stoichiometry and on the final oxidation states of the constituent elements; and • Using the information obtained to propose better precursors for given ALD processes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Accelerating plasma and radiation surface science using transient grating spectroscopy

A facility for the investigation of in situ radiation-materials and plasma-materials interaction is demonstrated with tungsten, using transient grating spectroscopy as a probe of thermal diffusivity and surface acoustic wave speed. Helium plasma exposure at 645 °C to 1.18 × 10 18 cm −2 helium, until the growth of tungsten fuzz, showed an increase in surface acoustic wave speed at the near-surface from 2542 ± 1 m s −1 up to 2565 ± 1 m s −1 , followed by a greater drop to 2499 ± 7 m s −1 . No observable change in thermal diffusivity was present for plasma exposure alone. A separate 10.26 MeV self-ion-irradiation of tungsten to a dose of 7.92 dpa showed a reduction in both thermal diffusivity from 61.4 ± 1.4 mm 2 s −1 to 36.0 ± 0.7 mm 2 s −1 , following trends seen in existing studies, and surface acoustic wave speed from 2647.8 ± 0.6 m s −1 to 2640.0 ± 0.4 m s −1 . Facilities like these are poised to rapidly close critical knowledge gaps regarding the coupled effects of plasma and radiation damage for materials in fusion systems.

Accelerated plasmas↗
DOE OSTI2024

Surface science insight note: A linear algebraic approach to elucidate native films on Fe 3 O 4 surface

Standard materials are often used to obtain spectra that can be compared to those from unknown samples. Spectra measured from these known substances are also used as a means of computing sensitivity factors to allow quantification by X-ray photoelectron spectroscopy (XPS) of less well-defined materials. Spectra from known materials also provide line shapes suitable for inclusion in spectral models which, when fitted to spectra, permit the chemical state for a sample to be assessed. Both types of information depend on isolating photoemission signals from the inelastically scattered signal. In this Insight note, technical issues associated with the use of XPS of as received Fe 3 O 4 powder sample surface are discussed. The Insight note is designed to show how linear algebraic techniques applied to data collected from a sample marketed as pure Fe 3 O 4 powder are used to verify that XPS has been performed on chemistry representative of the sample. The methods described in this Insight note can further be utilized in elucidating complex XPS data obtained from thin films formed or evolved during cyclic/non-steady use of complex (electro)catalyst surfaces, especially in the presence of contaminants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

How transparent is graphene? A surface science perspective on remote epitaxy

Remote epitaxy is the synthesis of a single crystalline film on a graphene-covered substrate, where the film adopts epitaxial registry to the substrate as if the graphene is transparent. Despite many exciting applications for flexible electronics, strain engineering, and heterogeneous integration, an understanding of the fundamental synthesis mechanisms remains elusive. Here we offer a perspective on the synthesis mechanisms, focusing on the foundational assumption of graphene transparency. We identify challenges for quantifying the strength of the remote substrate potential that permeates through graphene, and propose Fourier and beating analysis as a bias-free method for decomposing the lattice potential contributions from the substrate, from graphene, and from surface reconstructions, each at different frequencies. We highlight the importance of graphene-induced reconstructions on epitaxial templating, drawing comparison to moiré epitaxy. We highlight the role of the remote potential in tuning surface diffusion and adatom kinetics on graphene, which are crucial for navigating the competition between remote epitaxy and defect-seeded mechanisms like pinhole epitaxy. In light of this weak remote potential, we re-evaluate the current state-of-the-art experimental evidence, highlighting why it remains challenging to experimentally validate a ‘remote’ epitaxy mechanism that cannot be explained by alternatives, such as pinhole-seeded epitaxy or serial van der Waals epitaxy. We end with one experimental example that, to out knowledge, cannot be explained by competing mechanisms: a different long-range epitaxial relationship for GdPtSb films grown on graphene/sapphire, compared to direct epitaxy on sapphire. We suggest for future experiments that directly measure the remote potential and impact of tuneable growth kinetics.

epitaxy↗
DOE OSTI2024

Surface science insight note: Optimizing XPS instrument performance for quantification of spectra

X-ray photoelectron spectroscopy (XPS) provides quantitative information from photoemission peaks and shapes observed within the background due to the inelastic scattering of photoelectrons. To quantify the signal, both photoemission peaks and background in spectra must be adjusted for instrumental transmission variations that are a consequence of changes in efficiency when recording electrons with different kinetic energy. While it is generally assumed that correcting spectroscopic data for transmission is a necessary part of quantification by XPS, there are consequences for the quantification of spectra measured using an instrument for which transmission has significant curvature. In this Insight, the implications of curvature in transmission characteristics are discussed and a method based on XPS microscopy is proposed that ensures the transmission response of an instrument is free from significant curvature. An example of an instrument for which a flat transmission response is presented is achieved through collecting spectra using lens modes designed to measure stigmatic images.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The evolution of model Rh/Fe 3 O 4 (001) catalysts in hydrogen environments

Single metal atoms dispersed on oxides are a new emerging class of catalysts owing to their unique electronic and chemical properties. Here, in this study, we have prepared a series of model single-atom catalysts possessing well-characterized Rh sites that include Rh adatoms (Rh ad ), mixed surface layers with octahedrally-coordinated Rh (Rh oct ), as well as metallic Rh clusters and nanoparticles (Rh met ) on Fe 3 O 4 (001). Using X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM), we investigated the activity of such model systems towards H2 and their stability in reducing environments. Our results show that the atomically dispersed Rhad and Rhoct species do not activate H 2 , which would result in the formation of surface hydroxyls on Fe 3 O 4 (001). In contrast, the presence of Rh met in H 2 results in the formation of hydroxyls and subsequent etching of the Fe 3 O 4 (001) at higher temperatures (≥ 500 K) due to water formation via the Mars-van Krevelen mechanism. Additionally, such surface etching leads to the release of the Rh oct from the surface lattice and their sintering to Rh met . To bridge the material gap between the surface science models and high surface area catalysts, we perform parallel studies on powder Rh/Fe 3 O 4 catalysts. The XPS characterization shows remarkable similarities between these systems. Further, our surface science studies provide an atomistic picture of the behavior of high surface area catalysts in the H 2 atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Thoughts on the past, present and future of UHV surface chemistry and the birth of Single-Atom Alloys

Throughout its relatively short lifetime, ultra-high vacuum (UHV) surface chemistry has progressed quickly. In the 1960's, pioneers like Ertl and Somorjai started the field using single crystals and gained significant insight into catalytic processes by relating surface structure to reactivity. The more recent proliferation of scanning probes has significantly increased the power of the single crystal approach by enabling the atomic-scale structure of active sites to be correlated with their reactivity. In this perspective we briefly discuss how the field developed, identify some challenges, and highlight Single-Atom Alloys (SAAs), a new class of heterogeneous catalyst that was developed from a fundamental surface science approach. However, despite recent successes, funding for fundamental surface science has declined. Academic hires in the discipline are also declining in part due to the start-up costs. We make the case that fundamental UHV surface chemistry is still too young a field to be in recession.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Boosting CO2R Performance of Ag Electrocatalysts by Sulfur-Doped Carbon Support

We find that S-doped carbon support can boost the CO2 reduction (CO2R) performance of Ag electrocatalysts. Firstly, surface science enabled electrocatalysis showed that Ag supported on S-doped highly oriented pyrolytic graphite (HOPG), a model electrocatalyst, demonstrated 100% higher CO turnover frequency (TOFCO = 3.6 ± 0.2 CO/atomAg/s) than that supported on S-free HOPG (TOFCO = 1.8 ± 0.2 CO/atomAg/s). Computational modeling based on density functional theory (DFT) revealed a more stabilized *COOH intermediate on Ag supported on S-doped carbon and thus a more favorable energetic pathway of CO2-to-CO, consistent with experimental results from the model electrocatalysts studies. Finally, this proof of concept was translated to the synthesis of powder electrocatalyst with 2 wt% Ag supported on S-doped carbon black, demonstrating > 40-fold high CO mass activity than a commercial Ag cathode with steady FECO ~ 96% at 100 mA/cm2 for 50 hours of continuous operation in a gas diffusion electrode (GDE) electrolyzer. For comparison, 2 wt% Ag supported on carbon black without S- doping showed a maximum FECO ~ 70% at 100 mA/cm2. This work demonstrates a successful bottom-up design of CO2R electrocatalysts guided by surface science enabled electrocatalysis.

CO2 conversion↗
DOE OSTI2026

Continuity of reaction kinetics across the pressure and materials gaps in CO oxidation on FeO–Pt interfaces

Translating atomic-scale insights from surface science studies of model catalysts to practical powder catalysts remains a persistent challenge in heterogeneous catalysis. Here, in this study, we demonstrate mechanistic continuity across the pressure and materials gaps during CO oxidation at the FeO-Pt interface using in situ microscopy, spectroscopy and computational modelling. Under reaction conditions, coordinatively unsaturated Fe (Fe cus ) sites at the interface enable selective O 2 activation on CO-saturated surfaces, circumventing the CO-poisoning limitation of platinum-group metals. We identify parallel reaction pathways involving the *O 2 -*CO intermediate. Remarkably, activation energies remain consistent at 12-15 kJ mol −1 (0.12-0.16 eV) from ultrahigh vacuum to atmospheric pressures and from FeO/Pt(111) model catalysts to FeO/Pt powder catalysts, validating mechanistic insights derived from surface science studies. Our findings show an example of bridging the long-standing divide between model and practical catalyst systems, establishing an effective approach to capture catalytic behaviours under operational conditions and advancing mechanism-driven catalyst design.

03 NATURAL GAS↗
DOE OSTI2026

Distinct Kinetic Signatures of Photodesorption from Metal Nanoparticles

Visible photon fluxes can influence the rate and selectivity of heterogeneously catalyzed reactions on metal nanoparticle surfaces. Models describing the influence of photon fluxes have typically introduced photon flux dependent apparent thermal kinetic parameters (reaction orders, activation energies, binding energies, etc.). This has relied on empirical fitting of reaction rate data, making mechanistic interpretations of how photon fluxes influence elementary step rates challenging and inconsistent with fundamental descriptions of photochemistry on metal surfaces developed from surface science studies. Using the CO adsorption–desorption quasi-equilibrium reaction on Pt/Al 2 O 3 catalysts as a model system, we measured steady state adsorbed CO (CO*) coverages under isothermal and isobaric (1 mbar CO) conditions as a function of temperature (473–573 K) and of 440 nm photon flux ((0.1–5.2) × 10 3 # hv Pt site –1 s –1 ) using in situ IR spectroscopy. Steady state CO* coverage on Pt was photon flux dependent with increasing photon flux causing decreasing coverage, consistent with photons driving CO* desorption rates faster than thermal CO* desorption rates. However, photon flux dependent CO* coverages were essentially temperature independent, inconsistent with models that describe photon effects using perturbations to apparent thermal kinetic parameters. Instead, 120 steady state CO* coverages as a function of temperature and photon flux are quantitatively described by a kinetic model in which the overall desorption rate is a summation of independent thermal and photon induced CO* desorption rates. Site-resolved analysis reveals distinct kinetic parameters for photon driven desorption of CO* from well-coordinated, under-coordinated, and highly under-coordinated Pt sites, with temperature-dependent apparent quantum efficiencies (AQE) consistent with temperature dependence of vibrational quanta distribution of adsorbed CO. The rigorous kinetic rate laws for independent photon and thermal driven pathways allow for predictive modeling of the influence of photon fluxes on the rates of CO* desorption under catalytic conditions. Further, the analysis provides evidence that steady state continuous wave photon fluxes can drive desorption/adsorption reactions on metal surfaces out of thermal equilibrium, reconciling surface science observations of molecular photodesorption with applied catalysis. The work establishes a general kinetic framework to be considered for photon driven processes on metals, and defines catalyst, reaction, and photon flux characteristic design principles for breaking Sabatier limitations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The surface chemistry of cuprous oxide

The chemical and electronic properties of copper combined with its large natural abundance lend this material to impact a wide range of technological applications, including heterogeneous catalysis. The reactivity of copper in its Cu 1+ oxidation state makes this specific configuration relevant in various chemical reactions, but the facile redox properties of copper make the isolation of individual states for fundamental studies difficult. Here, in this study, we review three Cu 2 O model systems used to study the interaction of Cu 1+ with small molecules making use of surface science techniques: Cu 2 O/Cu(111), thin polycrystalline Cu 2 O films on Cu foil, and bulk Cu 2 O crystals. Advantages and disadvantages of each system are discussed and exemplified through case studies of chemical adsorption and reactivity studies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Direct Comparison of the Activity and Selectivity of Rh 1 Cu and Ni 1 Cu Single-Atom Alloy Sites for Ethanol Decomposition

Ethanol is an important source of clean hydrogen, acetaldehyde, acetic acid, acetate esters, and light hydrocarbons. Controlling the divergent reaction pathways to these products requires understanding how different active sites influence the elementary steps involved. Herein, we present a combined surface science, theory, and nanoparticle catalysis study demonstrating how two single-atom dopants (Rh and Ni) in a Cu host can distinctively alter the selectivity of alcohol conversion. Specifically, our model studies reveal that ethanol reacts on Ni 1 Cu single-atom alloys to selectively produce acetaldehyde, whereas methane and CO are also formed on Rh 1 Cu single-atom alloys. Interestingly, these different reactivities are in contrast to the behavior of the pure metals as Ni(111) and Rh(111) surfaces favor methane/CO and surface carbon/CO, respectively. DFT calculations of reaction pathways and simulated product desorption based on microkinetic analyses explain these reactivity differences, demonstrating that C–C cleavage leading to methane formation has a lower barrier on Rh single-atom sites. To test the catalytic relevance of these fundamental results we synthesized and characterized supported Ni 1 Cu and Rh 1 Cu single-atom alloy nanoparticles with dopant:Cu ratios of 1:200. Flow reactor results revealed that both Ni and Rh increased ethanol conversion over Cu and that Ni 1 Cu catalysts were >99.9% selective to acetaldehyde, while Rh 1 Cu also produced 0.6%–2.6% of equimolar methane and CO between 433 and 493 K, demonstrating that C–C bond cleavage is enabled by isolated Rh sites. Furthermore, these catalytic results bridge the pressure and materials gaps, and together, this study provides insights into how different isolated dopant sites promote different catalytic pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Understanding of Ag Nanocatalysts for Electrocatalytic CO2 Conversion: Effects of Particle Size and Carbon Support

In this talk, we combined ultrahigh vacuum (UHV) surface science techniques, electrochemical measurements, and computational modeling to investigate Ag based electrocatalysts for CO2 reduction reaction (CO2RR). Our goal is to understand the critical characteristics governing the activity and selectivity of Ag electrocatalysts. Ag electrocatalysts were grown on highly oriented pyrolytic graphite (HOPG) in the UHV chamber, characterized with X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM), and then tested in a custom-built gastight H-cell. Supported by computational modeling based on density functional theory (DFT) calculations and microkinetic modeling (MKM), our studies revealed a strong size-dependent electrocatalytic CO2-to-CO conversion of the Ag nanoparticle electrocatalysts with average particle diameter between 2 to 6 nm. Smaller diameter (< 3 nm) particles favored H2 evolution reaction (HER) due to a high population of Ag edge sites, whereas larger diameter particles favored CO2RR as the population of Ag(100) surface sites grew. We further discovered that electronic interactions between small diameter Ag particles and highly defective carbon supports could break the size-dependent CO2RR reactivity, resulting in highly selective (CO Faradaic Efficiency > 90%) and active Ag nanoparticle electrocatalysts with sizes < 2 nm diameter. This knowledge is key to understand electrocatalysts performance and to ultimately guide electrocatalyst design

Ag nanoparticles↗
DOE OSTI2024

Atomic structure of different surface terminations of polycrystalline ZnPd

The intermetallic compound ZnPd has been found to have desirable characteristics as a catalyst for the steam reforming of methanol. The understanding of the surface structure of ZnPd is important to optimize its catalytic behavior. However, due to the lack of bulk single-crystal samples and the complexity of characterizing surface properties in the available polycrystalline samples using common experimental techniques, all previous surface science studies of this compound have been performed on surface alloy samples formed through thin-film deposition. In this study, we present findings on the chemical and atomic structure of the surfaces of bulk polycrystalline ZnPd studied by a variety of complementary experimental techniques, including scanning tunneling microscopy (STM), x-ray photoelectron spectroscopy (XPS), low energy electron microscopy (LEEM), photoemission electron microscopy (PEEM), and microspot low-energy electron diffraction ( μ -LEED). These experimental techniques, combined with density functional theory (DFT)-based thermodynamic calculations of surface free energy and detachment kinetics at the step edges, confirm that surfaces terminated by atomic layers composed of both Zn and Pd atoms are more stable than those terminated by only Zn or Pd layers. DFT calculations also demonstrate that the primary contribution to the tunneling current arises from Pd atoms, in agreement with the STM results. The formation of intermetallics at surfaces may contribute to the superior catalyst properties of ZnPd over Zn or Pd elemental counterparts. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗
DOE OSTI2025

Alkali-induced catalytic tuning at metal and metal oxide interfaces

Alkali metals have been recognized as effective promoters in heterogeneous catalysis, capable of enhancing catalytic activity and tuning product distributions. Over the past few decades, significant efforts have been made aiming to reveal the mechanisms underlying the promoting effect of alkalis. However, the roles that alkali metals play in the catalytic process remain elusive due to challenges in capturing their catalytic behaviours upon exposure to reactive environments. This review summarizes recent surface science and theoretical studies of alkali (potassium, cesium)-decorated metal and metal oxide model catalysts, revealing the crucial tuning by alkalis of activity and selectivity for CO 2 hydrogenation. The analysis of electronic structures identifies the selective binding mechanism of the positively charged alkali ions on the surface, being able to reduce the surface work function and lead to strong electron polarization on the surfaces. Depending on the alkali–support interaction, the deposition of alkalis can selectively modify the bindings of reaction intermediates involved in CO 2 hydrogenation via the interplay among the ionic, covalent and electrostatic tunings. As a result, CO 2 can be effectively activated and converted into diverse products at the alkali–support interface, ranging from formic acid to methanol and ethanol. The identified selective bond-tuning advances the application of alkalis in promoting catalytic activity and controlling catalytic selectivity at alkali–support interfaces.

03 NATURAL GAS↗