Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Roles of Surface Step on Pt Nanoparticles in Electro-oxidation of Carbon Monoxide and Methanol

Design of highly active nanoscale catalysts for electro-oxidation of small organic molecules is of great importance to the development of efficient fuel cells. Increasing steps on single-crystal Pt surfaces is shown to enhance the activity of CO and methanol electro-oxidation up to several orders of magnitude. However, little is known about the surface atomic structure of nanoparticles with sizes of practical relevance, which limits the application of fundamental understanding in the reaction mechanisms established on single-crystal surfaces to the development of active, nanoscale catalysts. In this study, we reveal the surface atomic structure of Pt nanoparticles supported on multiwall carbon nanotubes, from which the amount of high-index surface facets on Pt nanoparticles is quantified. Correlating the surface steps on Pt nanoparticles with the electrochemical activity and stability clearly shows the significant role of surface steps in enhancing intrinsic activity for CO and methanol electro-oxidation. Here, we show that increasing surface steps on Pt nanoparticles of {approx}2 nm can lead to enhanced intrinsic activity up to {approx}200% (current normalized to Pt surface area) for electro-oxidation of methanol.

10 SYNTHETIC FUELS↗

Micro-plasticity of surface steps under adhesive contact: Part II - Multiple-dislocation mediated contact hardening

The study of micro-plasticity behavior near and at the rough surface is the critical link towards a fundamental understanding of contact, surface failures, friction and adhesion at small length scales. In the companion paper (Part I), we have studied the onset of surface yielding due to single-dislocation nucleation from a stepped surface under adhesive contact. Here we analyze the contact hardening behavior due to multiple dislocations in a two-dimensional dislocation model. Continuum micromechanical analyses are used to derive the configurational force on the dislocation, while a modified Rice-Thomson model is used to describe the dislocation nucleation. Dislocations nucleated from a surface source are stabilized and pile up as a result of the balance between the resolved driving force and the non-zero lattice resistance in the solid. The pileup dislocations will exert a strong back stress to prevent further dislocation nucleation and thus lead to the surface contact hardening, the degree of which depends on the slip-plane orientation. Particularly, we find that the dislocation interactions between two slip planes can make the contact loading order-of-magnitude easy to nucleate multiple dislocations, which is thus named "latent softening". A mechanistic explanation shows that the latent softening is closely related to the mode mixity of the stress concentration at the surface step. Dislocation nucleation will modify the geometric characteristics of the surface step, so that the contact-induced stress state near the step, as described by the mode mixity, changes. The altered stress state affects subsequent dislocation nucleation. Our calculations show that dislocation pileup on one slip plane can even cause spontaneous dislocation nucleation on the other slip plane without further increase of contact pressure. Furthermore, it is found that the rough surface contact at small length scale can lead to the formation of a surface tensile sub-layer caused by segregated dislocation pileups. The discrete-dislocation model provides novel insights to understanding of surface step deformation at a small length scale, which bridge atomistic simulations and continuum plastic flow analysis of surface asperity contact. Implications of the theoretical predictions are also discussed.

36 MATERIALS SCIENCE↗

Role of Surface Steps of Pt Nanoparticles on the Electrochemical Activity for Oxygen Reduction

The design of highly active nanoscale catalysts for the oxygen reduction reaction (ORR) and oxidation of small molecules such as the methanol oxidation reaction (MOR) constitutes the grand scientific and technological challenge in fuel cells. Although increasing surface steps on Pt nanoparticles was shown recently to enhance the activity of electrochemical oxidation of carbon monoxide and methanol electro-oxidation, little is known about the role of surface steps of nanoparticles on ORR activity. Here, we report that the ORR activity of Pt nanoparticles of {approx}2 nm is not influenced by surface steps, in contrast to MOR activity. Further, CO annealing experiments and in situ X-ray adsorption measurements clearly compare the role of surface step for ORR and MOR on Pt nanoparticles. The findings provide new insights to design highly active catalysts for proton exchange membrane fuel cells and direct methanol fuel cells.

10 SYNTHETIC FUELS↗

Role of Surface Steps of Pt Nanoparticles on the Electrochemical Activity for Oxygen Reduction

The design of highly active nanoscale catalysts for the oxygen reduction reaction (ORR) and oxidation of small molecules such as the methanol oxidation reaction (MOR) constitutes the grand scientific and technological challenge in fuel cells. Although increasing surface steps on Pt nanoparticles was shown recently to enhance the activity of electrochemical oxidation of carbon monoxide and methanol electro-oxidation, little is known about the role of surface steps of nanoparticles on ORR activity. Here, we report that the ORR activity of Pt nanoparticles of {approx}2 nm is not influenced by surface steps, in contrast to MOR activity. Further, CO annealing experiments and in situ X-ray adsorption measurements clearly compare the role of surface step for ORR and MOR on Pt nanoparticles. The findings provide new insights to design highly active catalysts for proton exchange membrane fuel cells and direct methanol fuel cells.

10 SYNTHETIC FUELS↗

Permeability and kinetic coefficients for mesoscale BCF surface step dynamics: Discrete two-dimensional deposition-diffusion equation analysis

Here, a discrete version of deposition-diffusion equations appropriate for description of step flow on a vicinal surface is analyzed for a two-dimensional grid of adsorption sites representing the stepped surface and explicitly incorporating kinks along the step edges. Model energetics and kinetics appropriately account for binding of adatoms at steps and kinks, distinct terrace and edge diffusion rates, and possible additional barriers for attachment to steps. Analysis of adatom attachment fluxes as well as limiting values of adatom densities at step edges for nonuniform deposition scenarios allows determination of both permeability and kinetic coefficients. Behavior of these quantities is assessed as a function of key system parameters including kink density, step attachment barriers, and the step edge diffusion rate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diameter-selective alignment of carbon nanotubes on Si(001) stepped surfaces

We report total-energy electronic-structure calculations based on the density-functional theory that provide stable adsorption sites, structural characteristics, and energy bands of carbon nanotubes (CNTs) adsorbed on the Si(001) stepped surfaces. We choose (5,5), (9,9), and (13,13) armchair CNTs with the diameters of 6.8 Å, 12.2 Å, and 17.6 Å, respectively, as representatives of CNTs and explore all the possible adsorption sites either on the terrace or at step edges. We find that the (9,9) CNT is most favorably adsorbed at the edge of the double-layer step D{sub B} along the 〈110〉 direction, whereas the (5,5) and (13,13) CNTs favor the terrace site where the CNTs are perpendicular to the Si dimer rows. This finding is indicative of the diameter-selective self-organized alignment of CNTs by exploiting the Si surface steps along the particular direction. We also find that the electronic structure of each CNT is modified upon adsorption depending on the adsorption site and the diameter of the CNTs. In particular, the (9,9) CNT at the most stable step edge site becomes semiconducting and the resultant valence and conduction bands exhibit nearly linear dispersion with the effective mass of 0.085 m{sub 0} (m{sub 0}: bare electron mass), preserving the characteristics of the Dirac electrons. We also find that the flat bands appear near the Fermi level (E{sub F}) when the (13,13) CNT is adsorbed at the metastable D{sub B} step edge, inferring that spin polarization is possible for the CNT on the Si(001) stepped surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of surface steps on chemical ordering in the subsurface of Cu(Au) solid solutions

Atomic steps are typically assumed to only influence surface phenomena of solids. In contrast, in this paper we show, using in-situ atomic-resolution electron microscopy observations and atomistic modeling, the pronounced effect from surface stepsin inducing compositional and structural evolution in the subsurface of a Cu(Au) solid solution. We find that Au surface segregation results in a stacked sequence of Cu-Au ordered phases in the subsurface. The presence of a monatomic step at the surface induces the formation of an anti-phase boundary that extends from the surface step to deeper layers by maintaining the same composition profile associated with each terrace. The bunching of surface steps induces chemical disordering of the Cu-Au ordered phases in the subsurface region of the bunched steps. These results demonstrate the instant propagation of surface dynamics of atomic steps into the subsurface region and can find broader applicability in utilizing surface defects to tune the composition and structure in the subsurface of alloys.

36 MATERIALS SCIENCE↗

Capillary fluctuations of surface steps: An atomistic simulation study for the model Cu(111) system

Molecular dynamics (MD) simulations are employed to investigate the capillary fluctuations of steps on the surface of a model metal system. The fluctuation spectrum, characterized by the wave number ($k$) dependence of the mean squared capillary-wave amplitudes and associated relaxation times, is calculated for $\langle 110 \rangle$ and $\langle 112 \rangle$ steps on the { 111 } surface of elemental copper near the melting temperature of the classical potential model considered. Step stiffnesses are derived from the MD results, yielding values from the largest system sizes of ( 37 ± 1 ) meV / Å for the different line orientations, implying that the stiffness is isotropic within the statistical precision of the calculations. The fluctuation lifetimes are found to vary by approximately four orders of magnitude over the range of wave numbers investigated, displaying a $k$ dependence consistent with kinetics governed by step-edge mediated diffusion. The values for step stiffness derived from these simulations are compared to step free energies for the same system and temperature obtained in a recent MD-based thermodynamic-integration (TI) study [Freitas, Frolov, and Asta, Phys. Rev. B 95, 155444 (2017)]. Results from the capillary-fluctuation analysis and TI calculations yield statistically significant differences that are discussed within the framework of statistical-mechanical theories for configurational contributions to step free energies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studying the Formation of Si (100) Stepped Surface in Molecular-Beam Epitaxy

Experimental studies of the formation of a stepped surface structure during molecular-beam epitaxy of silicon on a Si (100) substrate have been carried out in wide ranges of variation of the substrate temperature and silicon growth rate. The conditions of the transition from a two-domain structure of the Si (100) surface to a single-domain structure associated with the formation of diatomic steps are determined using reflection high-energy electron diffraction. It is shown that the effect of an increase in the substrate temperature on the transition to a single-domain structure is non-monotonic: a single-domain surface forms in the region of relatively low temperatures, whereas a two-domain surface forms at high temperatures. The transition to a single-domain structure during the experiment is possible only, if the silicon growth rate is increased above a certain minimum value.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dual roles of stepped surfaces: Catalytic initiators and stabilizers of oxygen-induced reconstructions

Understanding surface restructuring under reactive conditions is crucial for designing next-generation catalysts with enhanced activity and selectivity. Here, we employ in situ transmission electron microscopy to directly observe the dynamic behavior of Cu(100) and Cu(410) surfaces under both oxidizing and vacuum annealing conditions, revealing a complex interplay among surface crystallography, local oxygen coverage, Cu atom mobility, and step-edge reactivity. The stepped Cu(410) surface acts as an active site for O 2 dissociation, triggering the oscillatory transformation of the c(2 × 2)–O phase into the more stable (2$\sqrt2$ ×$\sqrt2$)R45°–O missing-row (MR) structure on the adjacent flat Cu(100) terrace. Under subsequent vacuum annealing, this same Cu(410) facet exhibits remarkable structural resilience, preserving the MR reconstruction and chemisorbed oxygen. In contrast, the Cu(100) surface undergoes reversible transitions from the MR structure back to the c(2 × 2)–O phase. These results highlight the critical role of surface morphology in directing both the formation and stability of oxygen-induced reconstructions, demonstrating that stepped surfaces serve dual roles as both catalytic initiators and structural stabilizers. Furthermore, this work offers atomic-level insights into the environment-responsive behavior of copper surfaces, establishing a mechanistic basis for designing Cu-based catalysts through facet-specific control of surface reactivity.

36 MATERIALS SCIENCE↗

X-ray photoemission analysis of clean and carbon monoxide-chemisorbed platinum(111) stepped surfaces using a curved crystal

Surface chemistry and catalysis studies could significantly gain from the systematic variation of surface active sites, tested under the very same conditions. Curved crystals are excellent platforms to perform such systematics, which may in turn allow to better resolve fundamental properties and reveal new phenomena. This is demonstrated here for the carbon monoxide/platinum system. We curve a platinum crystal around the high-symmetry (111) direction and carry out photoemission scans on top. This renders the spatial core-level imaging of carbon monoxide adsorbed on a 'tunable' vicinal surface, allowing a straightforward visualization of the rich chemisorption phenomenology at steps and terraces. Through such photoemission images we probe a characteristic elastic strain variation at stepped surfaces, and unveil subtle stress-release effects on clean and covered vicinal surfaces. Lastly, these results offer the prospect of applying the curved surface approach to rationally investigate the chemical activity of surfaces under real pressure conditions.

36 MATERIALS SCIENCE↗

Refined BCF-type boundary conditions for mesoscale surface step dynamics

Deposition on a vicinal surface with alternating rough and smooth steps is described by a solid-on-solid model with anisotropic interactions. Kinetic Monte Carlo (KMC) simulations of the model reveal step pairing in the absence of any additional step attachment barriers. We explore the description of this behavior within an analytic Burton-Cabrera-Frank (BCF)-type step dynamics treatment. Without attachment barriers, conventional kinetic coefficients for the rough and smooth steps are identical, as are the predicted step velocities for a vicinal surface with equal terrace widths. However, we determine refined kinetic coefficients from a two-dimensional discrete deposition-diffusion equation formalism which accounts for step structure. These coefficients are generally higher for rough steps than for smooth steps, reflecting a higher propensity for capture of diffusing terrace adatoms due to a higher kink density. Such refined coefficients also depend on the local environment of the step and can even become negative (corresponding to net detachment despite an excess adatom density) for a smooth step in close proximity to a rough step. Incorporation of these refined kinetic coefficients into a BCF-type step dynamics treatment recovers quantitatively the mesoscale step-pairing behavior observed in the KMC simulations.

97 MATHEMATICS AND COMPUTING↗

Resistivity of Surface Steps in Bulk-Insulating Topological Insulators

Electron transport in topological insulators usually involves both topologically protected surface states and trivial electronic states in the bulk material. The surface transport is particularly interesting; however, it is also susceptible to atomic defects on the surfaces, such as vacancies, impurities, and step edges. Experimental determination of scattering effects of these surface defects requires both nanoscale spatial resolution and the ability to decipher surface transport from bulk transport. Here we directly measure the resistivity of individual surface steps in the surface dominating transport process of topological insulator Bi 2 Te 2 Se. A variable probe-spacing transport spectroscopy with a multiprobe scanning tunneling microscope is used to differentiate the surface conductance from bulk conductance, allowing the identification of a surface dominant transport regime. The technique also reveals a deviation from ideal 2D transport at atomic steps. Then, a multi-probe scanning tunneling potentiometry is employed to visualize the electrochemical potentials across individual step edges. A quantitative analysis of the potential distributions enables us to acquire a resistivity of 0.530 mΩ · cm for the one quintuple-layer atomic step. The result indicates that atomic defects, despite preserving the time-reversal symmetry, can still significantly affect the transport in topological insulators.

36 MATERIALS SCIENCE↗

Reliability of AlGaN/GaN high electron mobility transistors on low dislocation density bulk GaN substrate: Implications of surface step edges

To enable gaining insight into degradation mechanisms of AlGaN/GaN high electron mobility transistors, devices grown on a low-dislocation-density bulk-GaN substrate were studied. Gate leakage current and electroluminescence (EL) monitoring revealed a progressive appearance of EL spots during off-state stress which signify the generation of gate current leakage paths. Atomic force microscopy evidenced the formation of semiconductor surface pits at the failure location, which corresponds to the interaction region of the gate contact edge and the edges of surface steps.

36 MATERIALS SCIENCE↗

Application of multi-angle scattering maps to stepped surfaces

This study examines channeling, multiple scattering, and neutralization/re-ionization of ions scattered along the stepped Al(332) plane. Our experimental approach involves probing the surface with 1–2 keV He + and Ne + beams, and then systematically mapping the scattered ion fluxes over a large solid angle. This provides comprehensive ion channeling information over all directions, rather than along a few low-index azimuths, as is common practice in ion scattering spectroscopy. We first probe the surface with 2 keV He + at near-normal incidence, and then map the backscattered particle flux (both ions and neutrals) via time of flight (TOF) spectrometry. The features contained in these maps can be correlated with axial and inter-planar channeling effects, and are reproduced well via binary collision simulations. Sensitivity to the stepped surface topography is heightened considerably for oblique ion incidence in the forward-scattering direction. In this geometry, we used 2 keV Ne + to probe the surface and mapped the corresponding scattered fluxes of both single and multiply-charged ions. In both cases, the scattering intensity depends strongly on the precise trajectory taken along the surface, and is particularly sensitive to how extensively the incident ions interact with the step edges. We interpret the information contained in these maps by considering several mechanisms for charge transfer and double ion production. The formation of Ne ++ appears to be correlated with a previously observed inelastic mechanism that occurs when the collision apsis, R min , is less than 0.65 Å. In conclusion, this contributes to an energy loss of 48 ± 8 eV for Ne + undergoing single scattering; the R min threshold for this inelastic step coincides with the emergence of a distinct Ne ++ peak. Using the information gained from the maps, we propose methods for extending this approach to chemisorbed layers.

47 OTHER INSTRUMENTATION↗

Domain formation due to surface steps in topological insulator Bi{sub 2}Te{sub 3} thin films grown on Si (111) by molecular beam epitaxy

The atomic structure of topological insulators Bi{sub 2}Te{sub 3} thin films on Si (111) substrates grown in van der Waals mode by molecular beam epitaxy has been investigated by in situ scanning tunneling microscopy and scanning transmission electron microscopy. Besides single and multiple quintuple layer (QL) steps, which are typical for the step-flow mode of growth, a number of 0.4 QL steps is observed. We determine that these steps originate from single steps at the substrate surface causing domain boundaries in the Bi{sub 2}Te{sub 3} film. Due to the peculiar structure of these domain boundaries the domains are stable and penetrate throughout the entire film.

36 MATERIALS SCIENCE↗

External strain-enhanced cysteine enantiomeric separation ability on alloyed stepped surfaces

Using density functional theory with an accurate treatment of van der Waals interactions, we investigate the enantioselective recognition and separation of chiral molecules on stepped metal surfaces. Our calculations demonstrate that the separation ability of metal substrates can be significantly enhanced by surface decoration and external strain. For example, applying 2% tensile strain to the Ag-alloyed Au(532) surface leads to a dramatic increase (by 89%) in cysteine enantioselectivity as compared to that of pristine Au(532). Analysis on the computed binding energies shows that the interaction energy is the predominant factor that affects the separation efficiency in strongly bound systems. Furthermore our study presents a new strategy to modify the enantioselectivity of stepped metal surfaces and paves the way for exploring high efficiency chiral separation technology in pharmaceutical industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗