Search NASA⌕ Search

SEARCH · Search NASA

Results for “sustainable source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Sustainably Sourced, Thermally Resistant, Radiation Hard Biopolymer

This material represents a breakthrough in the production, manufacturing, and application of thermal protection system (TPS) materials and radiation shielding, as this represents the first effort to develop a non-metallic, non-ceramic, biomaterial-based, sustainable TPS with the capability to also act as radiation shielding. Until now, the standing philosophy for radiation shielding involved carrying the shielding at liftoff or utilizing onboard water sources. This shielding material could be grown onboard and applied as needed prior to different radiation landscapes (commonly seen during missions involving gravitational assists). The material is a bioplastic material. Bioplastics are any combination of a biopolymer and a plasticizer. In this case, the biopolymer is a starch-based material and a commonly accessible plasticizer. Starch molecules are composed of two major polymers: amylase and amylopectin. The biopolymer phenolic compounds are common to the ablative thermal protection system family of materials. With similar constituents come similar chemical ablation processes, with the potential to have comparable, if not better, ablation characteristics. It can also be used as a flame-resistant barrier for commercial applications in buildings, homes, cars, and heater firewall material. The biopolymer is observed to undergo chemical transformations (oxidative and structural degradation) at radiation doses that are 1,000 times the maximum dose of an unmanned mission (10-25 Mrad), indicating that it would be a viable candidate for robust radiation shielding. As a comparison, the total integrated radiation dose for a three-year manned mission to Mars is 0.1 krad, far below the radiation limit at which starch molecules degrade. For electron radiation, the biopolymer starches show minimal deterioration when exposed to energies greater than 180 keV. This flame-resistant, thermal-insulating material is non-hazardous and may be sustainably sourced. It poses no hazardous waste threats during its lifecycle. The material composition is radiation-tolerant up to megarad doses, indicating its use as a radiation shielding material. It is lightweight, non-metallic, and able to be mechanically densified, permitting a tunable gradient of thermal and radiation protection as needed. The dual-use (thermal and radiation shielding), sustainable nature of this material makes it suitable for both industrial applications as a sustainable/green building material, and for space applications as thermal protection material and radiation shield.

Pugel, Diane↗
NASA NTRS1971

Experimental investigations of a uranium plasma pertinent to a self-sustaining plasma source

The research is pertinent to the realization of a self-sustained fissioning plasma for applications such as nuclear propulsion, closed cycle MHD power generation using a plasma core reactor, and heat engines such as the nuclear piston engine, as well as the direct conversion of fission energy into optical radiation (nuclear pumped lasers). Diagnostic measurement methods and experimental devices simulating plasma core reactor conditions are discussed. Studies on the following topics are considered: (1) ballistic piston compressor (U-235); (2) high pressure uranium plasma (natural uranium); (3) sliding spark discharge (natural uranium); (4) fission fragment interaction (He-3 and U-235); and (5) nuclear pumped lasers (He-3 and U-235).

Schneider, R. T.↗
NASA NTRS2021

Low-Maintenance Bioreactor Cultivates Fungi for Sustainable Food Source in Space

Nature’s Fynd, a food company headquartered in Chicago, Illinois, partnered with Montana State University on NASA STTR contracts to further develop a micro-gravity biofilm-biomat reactor, which cultivates a unique fungus to form a dense protein material. The resulting “biomat” could serve as a nutritious food source for life away from Earth. Nature’s Fynd has received external investments totaling more than $500 million for developing its technologies, and the company recently launched its meatless and dairy-free foods in specific retailers.

STTR↗
NASA NTRS2014

The Effect of Growth Environment and Salinity on Lipid Production and Composition of Salicornia virginica

Finding a viable and sustainable source of renewable energy is a global task. Biofuels as a renewable energy source can potentially be a viable option for sustaining long-term energy needs. Biodiesel from halophytes shows great promise due to their ability to serve not only as a fuel source, but a food source as well. Halophytes are one of the few biomass plant species that can tolerate a wide range of saline conditions. We investigate the feasibility of using the halophyte, Salicornia virginica as a biofuel source by conducting a series of experiments utilizing various growth and salinity conditions. The goal is to determine if the saline content of Salicornia virginica in our indoor growth vs outdoor growth conditions has an influence on lipid recovery and total biomass composition. We focused on using standard lipid extraction protocols and characterization methods to evaluate twelve Salicornia virginica samples under six saline values ranging from freshwater to seawater and two growth conditions. The overall goal is to develop an optimal lipid extraction protocol for Salicornia virginica and potentially apply this protocol to halophytes in general.

Bomani, Bilal Mark McDowell↗
NASA NTRS1983

The influence of the tropics on the prediction of ultralong waves. I - Tropical wind field

The effects of tropical wind data from the FGGE and tropical latent heating on numerical modeling of ultralong waves are considered in a two-part study. The model studied is the global fourth-order GLAS general circulation model, an energy-conserving format with horizontal differences calculated with fourth-order accuracy. Data assimilation experiments were performed with and without the wind data, with account taken of eastward and northward wind components, the geopotential height, and the relative humidity, all over pressure surfaces. The initial conditions were used to generate six pairs of forecasts, and the tropical wind error decreased after two days of prediction when the initial conditions contained the wind data. The deviations from the measured planetary wave data were attributed to differences in the initial rotational wind field, which varied on a three-day basis. The latent heat initial data had a five-day period and extended its influence beyond the tropical zone. The tropical heat sources sustained the tropical westerlies in the GLAS model, and removal of the tropical heat sources reversed the wind to easterlies.

Baker, W. E.↗
NASA NTRS2019

Researching Plant Growth in Amended Martian Regolith Simulant, Photosynthetic Rates of Plants, Seed Surface Decontamination by Plasma Methods, New Crop Development, and Porous Concrete Media

Plant growth research for food production at Kennedy Space Center looks at how future residents of Mars and the Moon will enjoy the sight, smell, taste, and nutrition of plants. Overall, the goal is to provide a sustainable source of healthy food, on long-duration space flights, so astronauts can get the nutrition they need and produce food. The sustainable production of food will aid in the efforts of closed life support. Plants have a vital application for bio regenerative life support as demands for food and oxygen can be provided through photosynthesis, while the carbon dioxide from human respiration is removed. Transpiration is also used in life support processes as waste water that can be recycled through plant systems with the resultant humidity then condensed as clean water. Selected crops will provide the nutrient requirements needed for long duration space flight. Currently, projects in food production are investigating how plants grow in Martian regolith simulant, new crops testing with tomato and pepper cultivars, acquiring real-time photosynthetic data on crops, assessing plant growth in porous concrete media, and the use of plasma for surface decontamination of seeds.

food production↗
NASA NTRS2018

Aiding in the Efforts of Bioregenerative Life Support for the Future Residents of Mars and Long-Duration Space Flights Plant Growth in Amended Martian Regolith Simulant

Currently, the goal of plant growth research at KSC (Kennedy Space Center) is to provide a sustainable source of healthy food on long-duration space flights so astronauts and future residents of Mars can get the nutrition they need and produce food, recycle the atmosphere, and aid in recycling water. The sustainable production of food will aid in the efforts of closed life support. Plants have a vital application for bioregenerative life support as demands for food and oxygen can be provided through photosynthesis, while the carbon dioxide from human respiration is removed. In order for a growing medium to provide for plant growth, it needs to provide support, oxygen, ions, and liquid to the plant. This summer research determines how amended Martian regolith simulant acts as a growing medium for plants through looking at the structural properties of each amendment. Mars is covered with regolith which is crushed volcanic rock that is composed of a high amount of perchlorate salts. The composition of Martian soil is such that it is roughly basaltic and consists of sulfur, nitrates, and oxychlorine species. Martian regolith simulants have been generated to further analyze plant growth and aim to replicate features of the reference sample. The JSC (Johnson Space Center) Mars-1A regolith simulant resembles Martian regolith at the Viking I landing site. The objectives of the research this summer at Kennedy Space Center are to devise a plant growth in amended JSC Mars-1A Martian regolith simulant and perform crop studies to assess the performance of full duration crop growth in amended Martian regolith simulant. This research will provide a deeper understanding of how the combination of soil amendments to Martian regolith has a synergistic effect on improving crop production The plant growth experiment will be completed with three treatments each containing inorganic and organic soil amendments.

Onsay, Daphne↗
NASA NTRS1990

Somatic embryogenesis of carrot in hormone-free medium: external pH control over morphogenesis

Cultures of preglobular stage proembryos (PGSPs) were initiated from mechanically wounded mature zygotic embryos of carrot, Daucus carota, on a hormone-free, semisolid medium. These PGSPs have been maintained and multiplied for extended periods without their progression into later embryo stages on the same hormone-free medium containing 1 mM NH4+ as the sole nitrogen source. Sustained maintenance of cultures comprised exclusively of PGSPs was dependent on medium pH throughout the culture period. Best growth and multiplication of PGSP cultures occurred when the pH of unbuffered, hormone-free medium fell from 4.5 to 4 over a 2-week period or when buffered medium was titrated to pH 4. If the hormone-free medium was buffered to sustain a pH at or above 4.5, PGSPs developed into later embryo stages. Maintenance with continuous multiplication of PGSPs occurred equally well on medium containing NH4+ or NH4+ and NO3-, but growth was poor with NO3- alone. Additional observations on the effects of medium components such as various nitrogen sources and levels, sucrose concentration, semisolid supports, type of buffer, borate concentration, activated charcoal, and initial pH that permit optimum maintenance of the PGSPs or foster their continued developmental progression into mature embryos and plantlets are reported. The influence of the pH of the hormone-free medium as a determinant in maintaining cultures as PGSPs or allowing their continued embryonic development are unequivocally demonstrated by gross morphology, scanning electron microscopy, and histological preparations.

NASA Discipline Number 29-20↗
NASA NTRS2000

SEM Characterization of Extinguished Grains from Plasma-Ignited M30 Charges

M30 propellant grains that had been ignited in interrupted closed bomb experiments were characterize by scanning electron microscopy (SEM). Previous chemical analysis of extinguished grains had given no indications of plasma-propellant chemical interactions that could explain the increased burning rates that had been previously observed in full-pressure closed bomb experiments. (This does not mean that there is no unique chemistry occurring with plasma ignition. It may occur very early in the ignition event and then become obscured by the burning chemistry.) In this work, SEM was used to look at grain morphologies to determine if there were increases in the surface areas of the plasma-ignited grains which would contribute to the apparent increase in the burning rate. Charges were made using 30 propellant grains (approximately 32 grams) stacked in two tiers and in two concentric circles around a plastic straw. Each grain was notched so that, when the grains were expelled from the bomb during extinguishment, it could be determined in which tier and which circle each grain was originally packed. Charges were ignited in a closed bomb by either a nickel wire/Mylar-capillary plasma or black powder. The bomb contained a blowout disk that ruptured when the pressure reached 35 MPa, and the propellant was vented into a collection chamber packed with polyurethane foam. SEM analysis of the grains fired with a conventional black powder igniter showed no signs of unusual burning characteristics. The surfaces seemed to be evenly burned on the exteriors of the grains and in the perforations. Grains that had been subjected to plasma ignition, however, had pits, gouges, chasms, and cracks in the surfaces. The sides of the grains closest to the plasma had the greatest amount of damage, but even surfaces facing the outer wall of the bomb had small pits. The perforations contained gouges and abnormally burned regions (wormholes) that extended into the web. The SEM photos indicated that a grain from the top tier, which was farther away from the plasma ignition source, sustained more plasma-induced damage to the perforations and the web than did the grains on the bottom tier.

Kinkennon, A.↗
NASA NTRS2011

NASA Tech Briefs, November 2011

The topics include: 1) Flight Test Results from the Rake Airflow Gage Experiment on the F-15B; 2) Telemetry and Science Data Software System; 3) CropEx Web-Based Agricultural Monitoring and Decision Support; 4) High-Performance Data Analysis Tools for Sun-Earth Connection Missions; 5) Experiment in Onboard Synthetic Aperture Radar Data Processing; 6) Microfabrication of a High-Throughput Nanochannel Delivery/Filtration System; 7) Improved Design and Fabrication of Hydrated-Salt Pills; 8) Monolithic Flexure Pre-Stressed Ultrasonic Horns; 9) Cryogenic Quenching Process for Electronic Part Screening; 10) Broadband Via-Less Microwave Crossover Using Microstrip-CPW Transitions; 11) Wheel-Based Ice Sensors for Road Vehicles; 12) G-DYN Multibody Dynamics Engine; 13) Multibody Simulation Software Testbed for Small-Body Exploration and Sampling; 14) Propulsive Reaction Control System Model; 15) Licklider Transmission Protocol Implementation; 16) Core Recursive Hierarchical Image Segmentation; 17) Two-Stage Centrifugal Fan; 18) Combined Structural and Trajectory Control of Variable-Geometry Planetary Entry Systems; 19) Pressure Regulator With Internal Ejector Circulation Pump, Flow and Pressure Measurement Porting, and Fuel Cell System Integration Options; 20) Temperature-Sensitive Coating Sensor Based on Hematite; 21) Standardization of a Volumetric Displacement Measurement for Two-Body Abrasion Scratch Test Data Analysis; 22) Detection of Carbon Monoxide Using Polymer-Carbon Composite Films; 23) Substituted Quaternary Ammonium Salts Improve Low-Temperature Performance of Double-Layer Capacitors; 24) Sustainably Sourced, Thermally Resistant, Radiation Hard Biopolymer; 25) Integrated Lens Antennas for Multi-Pixel Receivers; 26) 180-GHz Interferometric Imager; 27) Maturation of Structural Health Management Systems for Solid Rocket Motors; 28) Validating Phasing and Geometry of Large Focal Plane Arrays; 29) Transverse Pupil Shifts for Adaptive Optics Non-Common Path Calibration; 30) Qualification of Fiber Optic Cables for Martian Extreme Temperature Environments; 31) Solid-State Spectral Light Source System; 32) Multiple-Event, Single-Photon Counting Imaging Sensor; 33) Surface Modeling to Support Small-Body Spacecraft Exploration and Proximity Operations; and 34) Achieving Exact and Constant Turnaround Ratio in a DDS-Based Coherent Transponder.

Source record↗
NASA NTRS1957

Simple Sound Source in a 50- to 300- Foot-Per-Second Air Stream

In jet-engine combustor research, it may sometimes be desirable to excite some flow field within a combustor with a train of sound waves. This is because some of the flow fields are unstable, and the sound can trigger the instability. A sound source is thus used as an instrument to search out unstable flame, and as a mixer to increase heat release rates. When the combustor is small, it is possible to use electronic equipment to produce the desired sound. As the size of the combustor increases, it reaches a point where electronic drivers are no longer convenient. For such a cornbustor a sound source sustained by the approach flow is desired.

Donald R Boldman↗
NASA NTRSDate not supplied

Unleashing the Power of Anaerobic–Phototrophic Membrane Bioreactors for Sustainable Bioregenerative Life Support

Using the core ideals of bioregenerative life support, an anaerobic–phototrophic membrane bioreactor (APMBR) has been designed and operated at NASA’s Kennedy Space Center to treat complex wastewaters with the goal of closing water and nutrient cycles on early planetary bases. The system combined the previously operated anaerobic membrane bioreactor and the phototrophic membrane bioreactor that have been detailed in presentations at previous ICES conferences. This newly combined system is able to treat complex wastewater with completely automated controls on a small footprint. The treatment of wastes in this APMBR is as follows: (1) the waste enters the anaerobic subsystem, where solids are hydrolyzed and carbon is removed via anaerobic digestion, (2) an ultrafiltration membrane is used to separate the solids and the recovered water, (3) the effluent from the anaerobic subsystem is fed to the phototrophic subsystem on command, (4) the algae–bacteria consortium aids in nitrification in the recovered water, and (5) an ultrafiltration membrane is used to separate the algae and the final recovered water. The recovered water from the APMBR is rich in nutrients, making it a sustainable source of fertilizer for downstream hydroponic systems. This conference paper will detail the design and operation of the APMBR as a bioregenerative alternative to physical–chemical systems or bag and storage systems. In this paper, data will be presented on subsystem water quality, membrane performance, and effluent quality. Overall, the APMBR has the ability to treat wastewater using a combination of biological and filtration technologies that allow for higher removal efficiencies, low consumable use, and small footprint.

Jason A. Fischer↗
NASA NTRS1966

High intensity radiation heat source is capable of sustained operation

Water cooled, high intensity radiation source rated at 125 kw, with an efficiency of 31 to 34 percent is used in the evaluation of ablative materials under simulated conditions of high velocity entry into planetary atmospheres. The source operates repeatedly at maximum power for periods of 10 to 20 minutes.

Geideman, W. A.↗
NASA NTRS1995

Vacuum ultraviolet light source utilizing rare gas scintillation amplification sustained by photon positive feedback

A source of light in the vacuum ultraviolet (VUV) spectral region includes a reflective UV-sensitive photocathode supported in spaced parallel relationship with a mesh electrode within a rare gas at low pressure. A high positive potential applied to the mesh electrode creates an electric field which causes drifting of free electrons occurring between the electrodes and producing continuous VUV light output by electric field-driven scintillation amplification sustained by positive photon feedback mediated by photoemission from the photocathode. In one embodiment the lamp emits a narrow-band continuum peaked at 175 nm.

Aprile, Elena↗
NASA NTRS2002

Hydrogen in rocks: an energy source for deep microbial communities

To survive in deep subsurface environments, lithotrophic microbial communities require a sustainable energy source such as hydrogen. Though H2 can be produced when water reacts with fresh mineral surfaces and oxidizes ferrous iron, this reaction is unreliable since it depends upon the exposure of fresh rock surfaces via the episodic opening of cracks and fissures. A more reliable and potentially more voluminous H2 source exists in nominally anhydrous minerals of igneous and metamorphic rocks. Our experimental results indicate that H2 molecules can be derived from small amounts of H2O dissolved in minerals in the form of hydroxyl, OH- or O3Si-OH, whenever such minerals crystallized in an H2O-laden environment. Two types of experiments were conducted. Single crystal fracture experiments indicated that hydroxyl pairs undergo an in situ redox conversion to H2 molecules plus peroxy links, O3Si/OO\SiO3. While the peroxy links become part of the mineral structure, the H2 molecules diffused out of the freshly fractured mineral surfaces. If such a mechanism occurred in natural settings, the entire rock column would become a volume source of H2. Crushing experiments to facilitate the outdiffusion of H2 were conducted with common crustal igneous rocks such as granite, andesite, and labradorite. At least 70 nmol of H2/g diffused out of coarsely crushed andesite, equivalent at standard pressure and temperature to 5,000 cm3 of H2/m3 of rock. In the water-saturated, biologically relevant upper portion of the rock column, the diffusion of H2 out of the minerals will be buffered by H2 saturation of the intergranular water film.

Hydrogen/analysis↗
NASA NTRS2011

NASA's GreenLab Research Facility: A Guide for a Self-Sustainable Renewable Energy Ecosystem

There is a large gap between the production and demand for energy from alternative fuel and alternative renewable energy sources. The sustainability of humanity, as we know it, directly depends on the ability to secure affordable fuel, food, and freshwater. NASA Glenn Research Center (Glenn) has initiated a laboratory pilot study on using biofuels as viable alternative fuel resources for the field of aviation, as well as utilizing wind and solar technology as alternative renewable energy resources. The GreenLab Research Facility focuses on optimizing biomass feedstock using algae and halophytes as the next generation of renewable aviation fuels. The unique approach in this facility helps achieve optimal biomass feedstock through climatic adaptation of balanced ecosystems that do not use freshwater, compete with food crops, or use arable land. In addition, the GreenLab Research Facility is powered, in part, by alternative and renewable energy sources, reducing the major environmental impact of present electricity sources. The ultimate goal is to have a 100 percent clean energy laboratory that, when combined with biomass feedstock research, has the framework in place for a self-sustainable renewable energy ecosystem that can be duplicated anywhere in the world and can potentially be used to mitigate the shortage of food, fuel, and water. This paper describes the GreenLab Research Facility at Glenn and its power and energy sources, and provides recommendations for worldwide expansion and adoption of the facility s concept.

Bomani, B. M. McDowell↗