Search NASA⌕ Search

SEARCH · Search NASA

Results for “synthetic distribution model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Remote sensing of Earth terrain

Remote sensing of earth terrain is examined. The layered random medium model is used to investigate the fully polarimetric scattering of electromagnetic waves from vegetation. The model is used to interpret the measured data for vegetation fields such as rice, wheat, or soybean over water or soil. Accurate calibration of polarimetric radar systems is essential for the polarimetric remote sensing of earth terrain. A polarimetric calibration algorithm using three arbitrary in-scene reflectors is developed. In the interpretation of active and passive microwave remote sensing data from the earth terrain, the random medium model was shown to be quite successful. A multivariate K-distribution is proposed to model the statistics of fully polarimetric radar returns from earth terrain. In the terrain cover classification using the synthetic aperture radar (SAR) images, the applications of the K-distribution model will provide better performance than the conventional Gaussian classifiers. The layered random medium model is used to study the polarimetric response of sea ice. Supervised and unsupervised classification procedures are also developed and applied to synthetic aperture radar polarimetric images in order to identify their various earth terrain components for more than two classes. These classification procedures were applied to San Francisco Bay and Traverse City SAR images.

Kong, Jin AU↗
NASA NTRS2009

V3885 Sagittarius: A Comparison With a Range of Standard Model Accretion Disks

A chi-squared analysis of standard model accretion disk synthetic spectrum fits to combined Far Ultraviolet Spectroscopic Explorer and Space Telescope Imaging Spectrograph spectra of V3885 Sagittarius, on an absolute flux basis, selects a model that accurately represents the observed spectral energy distribution. Calculation of the synthetic spectrum requires the following system parameters. The cataclysmic variable secondary star period-mass relation calibrated by Knigge in 2006 and 2007 sets the secondary component mass. A mean white dwarf (WD) mass from the same study, which is consistent with an observationally determined mass ratio, sets the adopted WD mass of 0.7M(solar mass), and the WD radius follows from standard theoretical models. The adopted inclination, i = 65 deg, is a literature consensus, and is subsequently supported by chi-squared analysis. The mass transfer rate is the remaining parameter to set the accretion disk T(sub eff) profile, and the Hipparcos parallax constrains that parameter to mas transfer = (5.0 +/- 2.0) x 10(exp -9) M(solar mass)/yr by a comparison with observed spectra. The fit to the observed spectra adopts the contribution of a 57,000 +/- 5000 K WD. The model thus provides realistic constraints on mass transfer and T(sub eff) for a large mass transfer system above the period gap.

MASS TRANSFER RATE↗
NASA NTRS2015

A Metric to Quantify Shared Visual Attention in Two-Person Teams

Introduction: Critical tasks in high-risk environments are often performed by teams, the members of which must work together efficiently. In some situations, the team members may have to work together to solve a particular problem, while in others it may be better for them to divide the work into separate tasks that can be completed in parallel. We hypothesize that these two team strategies can be differentiated on the basis of shared visual attention, measured by gaze tracking. 2) Methods: Gaze recordings were obtained for two-person flight crews flying a high-fidelity simulator (Gontar, Hoermann, 2014). Gaze was categorized with respect to 12 areas of interest (AOIs). We used these data to construct time series of 12 dimensional vectors, with each vector component representing one of the AOIs. At each time step, each vector component was set to 0, except for the one corresponding to the currently fixated AOI, which was set to 1. This time series could then be averaged in time, with the averaging window time (t) as a variable parameter. For example, when we average with a t of one minute, each vector component represents the proportion of time that the corresponding AOI was fixated within the corresponding one minute interval. We then computed the Pearson product-moment correlation coefficient between the gaze proportion vectors for each of the two crew members, at each point in time, resulting in a signal representing the time-varying correlation between gaze behaviors. We determined criteria for concluding correlated gaze behavior using two methods: first, a permutation test was applied to the subjects' data. When one crew member's gaze proportion vector is correlated with a random time sample from the other crewmember's data, a distribution of correlation values is obtained that differs markedly from the distribution obtained from temporally aligned samples. In addition to validating that the gaze tracker was functioning reasonably well, this also allows us to compute probabilities of coordinated behavior for each value of the correlation. As an alternative, we also tabulated distributions of correlation coefficients for synthetic data sets, in which the behavior was modeled as a first-order Markov process, and compared correlation distributions for identical processes with those for disparate processes, allowing us to choose criteria and estimate error rates. 3) Discussion: Our method of gaze correlation is able to measure shared visual attention, and can distinguish between activities involving different instruments. We plan to analyze whether pilots strategies of sharing visual attention can predict performance. Possible measurements of performance include expert ratings from instructors, fuel consumption, total task time, and failure rate. While developed for two-person crews, our approach can be applied to larger groups, using intra-class correlation coefficients instead of the Pearson product-moment correlation.

Gontar, Patrick↗
NASA NTRS2016

Measuring and Modeling Shared Visual Attention

Multi-person teams are sometimes responsible for critical tasks, such as flying an airliner. Here we present a method using gaze tracking data to assess shared visual attention, a term we use to describe the situation where team members are attending to a common set of elements in the environment. Gaze data are quantized with respect to a set of N areas of interest (AOIs); these are then used to construct a time series of N dimensional vectors, with each vector component representing one of the AOIs, all set to 0 except for the component corresponding to the currently fixated AOI, which is set to 1. The resulting sequence of vectors can be averaged in time, with the result that each vector component represents the proportion of time that the corresponding AOI was fixated within the given time interval. We present two methods for comparing sequences of this sort, one based on computing the time-varying correlation of the averaged vectors, and another based on a chi-square test testing the hypothesis that the observed gaze proportions are drawn from identical probability distributions. We have evaluated the method using synthetic data sets, in which the behavior was modeled as a series of "activities," each of which was modeled as a first-order Markov process. By tabulating distributions for pairs of identical and disparate activities, we are able to perform a receiver operating characteristic (ROC) analysis, allowing us to choose appropriate criteria and estimate error rates. We have applied the methods to data from airline crews, collected in a high-fidelity flight simulator (Haslbeck, Gontar & Schubert, 2014). We conclude by considering the problem of automatic (blind) discovery of activities, using methods developed for text analysis.

attention↗
NASA NTRS1990

Empirical comparison of heuristic load distribution in point-to-point multicomputer networks

The study compared several load placement algorithms using instrumented programs and synthetic program models. Salient characteristics of these program traces (total computation time, total number of messages sent, and average message time) span two orders of magnitude. Load distribution algorithms determine the initial placement for processes, a precursor to the more general problem of load redistribution. It is found that desirable workload distribution strategies will place new processes globally, rather than locally, to spread processes rapidly, but that local information should be used to refine global placement.

Grunwald, Dirk C.↗
NASA NTRS2012

The Rise and Fall of Star Formation Histories of Blue Galaxies at Redshifts 0.2 < z < 1.4

Popular cosmological scenarios predict that galaxies form hierarchically from the merger of many progenitor, each with their own unique star formation history (SFH). We use the approach recently developed by Pacifici et al. to constrain the SFHs of 4517 blue (presumably star-forming) galaxies with spectroscopic redshifts in the range O.2 < z < 1:4 from the All-Wavelength Extended Groth Strip International Survey (AEGIS). This consists in the Bayesian analysis of the observed galaxy spectral ' energy distributions with a comprehensive library of synthetic spectra assembled using state-of-the-art models of star formation and chemical enrichment histories, stellar population synthesis, nebular emission and attenuation by dust. We constrain the SFH of each galaxy in our sample by comparing the observed fluxes in the B, R,l and K(sub s) bands and rest-frame optical emission-line luminosities with those of one million model spectral energy distributions. We explore the dependence of the resulting SFH on galaxy stellar mass and redshift. We find that the average SFHs of high-mass galaxies rise and fall in a roughly symmetric bell-shaped manner, while those of low-mass galaxies rise progressively in time, consistent with the typically stronger activity of star formation in low-mass compared to high-mass galaxies. For galaxies of all masses, the star formation activity rises more rapidly at high than at low redshift. These findings imply that the standard approximation of exponentially declining SFHs wIdely used to interpret observed galaxy spectral energy distributions is not appropriate to constrain the physical parameters of star-forming galaxies at intermediate redshifts.

Pacifici, Camilla↗
NASA NTRS2021

Constraining the Neutron Star Mass–Radius Relation and Dense Matter Equation of State with NICER. III. Model Description and Verification of Parameter Estimation Codes

We describe the X-ray pulse profile models we use and how we use them to analyze Neutron Star Interior Composition Explorer(NICER)observations of rotation-powered millisecond pulsars to obtain information about the mass–radius relation of neutron stars and the equation of state of the dense matter in their cores. Here we detail our modeling of the observed profile of PSR J0030+0451 that we analyzed in Miller et al. and Riley et al. and describe a cross-verification of computations of the pulse profiles of a star with R/M 3, in case stars this compact need to be considered in future analyses. We also present our early cross-verification efforts of the parameter estimation procedures used by Miller et al. and Riley et al. by analyzing two distinct synthetic data sets. Both codes yielded credible regions in the mass–radius plane that are statistically consistent with one another, and both gave posterior distributions for model parameter values consistent with the values that were used to generate the data. We also summarize the additional tests of the parameter estimation procedure of Miller et al. that used synthetic pulse profiles and the NICER pulse profile of PSR J0030+0451. We then illustrate how the precision of mass and radius estimates depends on the pulsar’s spin rate and the size of its hot spot by analyzing four different synthetic pulse profiles. Finally, we assess possible sources of systematic error in the estimates made using this technique, some of which may warrant further investigation.

Slavko Bogdanov↗
NASA NTRS2019

Warm Absorber Diagnostics of AGN Dynamics

Warm absorbers and related phenomena are some of the observable manifestations of outflows or winds from active galactic nuclei (AGNs). Warm absorbers are common in low-luminosity AGNs. They have been extensively studied observationally and are well described by simple phenomenological models. However, major open questions remain. What is the driving mechanism? What is the density and geometrical distribution? How much associated fully ionized gas is there? What is the relation to the quasi-relativistic "ultrafast outflows"? In this paper we present synthetic spectra for the observable properties of warm absorber flows and associated quantities. We use ab initio dynamical models, i.e., solutions of the equations of motion for gas in finite difference form. The models employ various plausible assumptions for the origin of the warm absorber gas and the physical mechanisms affecting its motion. The synthetic spectra are presented as an observational test of these models. In this way we explore various scenarios for warm absorber dynamics. We show that observed spectra place certain requirements on the geometrical distribution of the warm absorber gas, and that not all dynamical scenarios are equally successful at producing spectra similar to what is observed.

Kallman, Timothy R.↗
NASA NTRS1992

External calibration of polarimetric radar images using distributed targets

A new technique is presented for calibrating polarimetric synthetic aperture radar (SAR) images using only the responses from natural distributed targets. The model for polarimetric radars is assumed to be X = cRST where X is the measured scattering matrix corresponding to the target scattering matrix S distorted by the system matrices T and R (in general T does not equal R(sup t)). To allow for the polarimetric calibration using only distributed targets and corner reflectors, van Zyl assumed a reciprocal polarimetric radar model with T = R(sup t); when applied for JPL SAR data, a heuristic symmetrization procedure is used by POLCAL to compensate the phase difference between the measured HV and VH responses and then take the average of both. This heuristic approach causes some non-removable cross-polarization responses for corner reflectors, which can be avoided by a rigorous symmetrization method based on reciprocity. After the radar is made reciprocal, a new algorithm based on the responses from distributed targets with reflection symmetry is developed to estimate the cross-talk parameters. The new algorithm never experiences problems in convergence and is also found to converge faster than the existing routines implemented for POLCAL. When the new technique is implemented for the JPL polarimetric data, symmetrization and cross-talk removal are performed on a line-by-line (azimuth) basis. After the cross-talks are removed from the entire image, phase and amplitude calibrations are carried out by selecting distributed targets either with azimuthal symmetry along the looking direction or with some well-known volume and surface scattering mechanisms to estimate the relative phases and amplitude responses of the horizontal and vertical channels.

Yueh, Simon H.↗
NASA NTRS1995

Distributed and collaborative synthetic environments

Fast graphics workstations and increased computing power, together with improved interface technologies, have created new and diverse possibilities for developing and interacting with synthetic environments. A synthetic environment system is generally characterized by input/output devices that constitute the interface between the human senses and the synthetic environment generated by the computer; and a computation system running a real-time simulation of the environment. A basic need of a synthetic environment system is that of giving the user a plausible reproduction of the visual aspect of the objects with which he is interacting. The goal of our Shastra research project is to provide a substrate of geometric data structures and algorithms which allow the distributed construction and modification of the environment, efficient querying of objects attributes, collaborative interaction with the environment, fast computation of collision detection and visibility information for efficient dynamic simulation and real-time scene display. In particular, we address the following issues: (1) A geometric framework for modeling and visualizing synthetic environments and interacting with them. We highlight the functions required for the geometric engine of a synthetic environment system. (2) A distribution and collaboration substrate that supports construction, modification, and interaction with synthetic environments on networked desktop machines.

Bajaj, Chandrajit L.↗
NASA NTRS1991

The spectrum of Saturn from 1990 to 2230/cm - Abundances of AsH3, CH3D, CO, GeH4, NH3, and PH3

An analysis is presented of the abundances and vertical distributions of all known absorbers in the 5-micron spectrum of Saturn, in view of previously unpublished observations, synthetic spectra of each atmospheric constituent, and an atmospheric model for synthesizing Saturn's spectrum in order to make comparisons with observations. The model used encompasses the abundances of all gaseous absorbers, their vertical distributions, clouds, and the thermal and reflected solar components of planetary flux. A coherent understanding is in this way obtained of both the many variables affecting Saturn's 5-micron spectrum and the similarities between Jupiter and Saturn.

Noll, Keith S.↗
NASA NTRS2023

Non-Gaussian Ensemble Filtering and Adaptive Inflation for Soil Moisture Data Assimilation

The rank histogram filter (RHF) and the ensemble Kalman filter (EnKF) are assessed for soil moisture estimation using perfect model (identical twin) synthetic data assimilation experiments. The primary motivation is to gauge the impact on analysis quality attributable to the consideration of non-Gaussian forecast error distributions. Using the NASA Catchment land surface model, the two filters are compared at 18 globally-distributed single-catchment locations for a 10-year experiment period. It is shown that both filters yield adequate estimates of soil moisture, with the RHF having a small but significant performance advantage. Most notably, the RHF systematically increases the normalized information contribution (NIC) score of the mean absolute bias by 0.05 over that of the EnKF for surface, root-zone and profile soil moisture. The RHF also increases the NIC score for the anomaly correlation of surface soil moisture by 0.02 over that of the EnKF (at a 5% significance level). Results also demonstrate that the performance of both filters is somewhat improved when the ensemble priors are adaptively inflated to offset the negative effects of systematic errors.

Soil moisture↗
NASA NTRSDate not supplied

Non-Gaussian Ensemble Filtering and Adaptive Inflation for Soil Moisture Data Assimilation

The rank histogram filter (RHF) and the ensemble Kalman filter (EnKF) are assessed for soil moisture estimation using perfect model (identical twin) synthetic data assimilation experiments. The primary motivation is to gauge the impact on analysis quality attributable to the consideration of non-Gaussian forecast error distributions. Using the NASA Catchment land surface model, the two filters are compared at 18 globally distributed single-catchment locations for a 10-yr experiment period. It is shown that both filters yield adequate estimates of soil moisture, with the RHF having a small but significant performance advantage. Most notably, the RHF consistently increases the normalized information contribution (NIC) score of the mean absolute bias by 0.05 over that of the EnKF for surface, root-zone, and profile soil moisture. The RHF also increases the NIC score for the anomaly correlation of surface soil moisture by 0.02 over that of the EnKF (at a 5% significance level). Results additionally demonstrate that the performance of both filters is somewhat improved when the ensemble priors are adaptively inflated to offset the negative effects of systematic errors.

Rolf Reichle↗
NASA NTRS1991

Stellar evolution and period changes in RR Lyrae stars

The observed secular period changes of RR Lyrae stars in five globular clusters have been compared with those predicted by synthetic models of the horizontal branch (HB). It is shown that most of the observed number distributions of the period change rate beta could be attributed to evolutionary effects, if the random observational error is of order + or - 0.07 days/Myr in beta as suggested by the observers. The model calculations indicate that the mean rate of period change in RR Lyrae stars in globular clusters depends sensitively on their HB type, as is the case for the period shift at a given effective temperature. The distinct bias toward positive period changes in M15 and Omega Cen is evidence that most HB stars in the Oosterhoff group II clusters pass through the instability strip from blue to red toward the end of their core helium burning phase. If confirmed by future observations, this is strong support for the Lee et al. (1990) explanation of the Sandage (1957) period-shift effect.

Lee, Young-Wook↗
NASA NTRS2012

Aerosol and Surface Parameter Retrievals for a Multi-Angle, Multiband Spectrometer

This software retrieves the surface and atmosphere parameters of multi-angle, multiband spectra. The synthetic spectra are generated by applying the modified Rahman-Pinty-Verstraete Bidirectional Reflectance Distribution Function (BRDF) model, and a single-scattering dominated atmosphere model to surface reflectance data from Multiangle Imaging SpectroRadiometer (MISR). The aerosol physical model uses a single scattering approximation using Rayleigh scattering molecules, and Henyey-Greenstein aerosols. The surface and atmosphere parameters of the models are retrieved using the Lavenberg-Marquardt algorithm. The software can retrieve the surface and atmosphere parameters with two different scales. The surface parameters are retrieved pixel-by-pixel while the atmosphere parameters are retrieved for a group of pixels where the same atmosphere model parameters are applied. This two-scale approach allows one to select the natural scale of the atmosphere properties relative to surface properties. The software also takes advantage of an intelligent initial condition given by the solution of the neighbor pixels.

Broderick, Daniel↗
NASA NTRS1986

A theoretical and observational study of the Red Giant Branch phase transition in Magellanic Cloud clusters - A progress report

Preliminary results are reported for an investigation comparing theoretical models of the sudden appearance of an extended RGB (and its effects on the spectral energy distributions of stellar populations) with data from ESO CCD observations of clusters in the LMC and SMC. Isochrones for the entire RGB are being constructed on the basis of 100 new evolutionary sequences (calculated using the evolution code of Sweigart and Gross, 1976 and 1978) to permit determination of synthetic colors and spectral energy distributions. The observations so far indicate a main sequence about 0.1 mag redder than that predicted by the present models or by the isochrones of VandenBerg and Bell (1985), and fail to show a B-V color difference at the RGB phase transition.

Buonanno, R.↗
NASA NTRS1994

Theoretical spectra of circumstellar dust shells around carbon-rich asymptotic giant branch stars

Realistic modeling of circumstellar dust shells around evolved stars has to include a physical treatment of the interaction among hydrodynamics, thermodynamics, radiative transfer, chemistry and dust formation and -growth. A self-consistent solution of this problem is presented in the case of stationary, spherical symmetric dust-driven winds. The resulting shell structure and the mass-loss rate are completely determined by the three fundamental stellar parameters stellar mass M(stellar), stellar luminosity L(stellar) and effective temperature T(sub eff) and by the element abundances epsilon(sub i). A detailed calculation of the transport coefficients of the dust component by means of the particle size distribution function and the solution of the non-grey radiative transfer problem provide realistic synthetic spectra of the dust shell models. We discuss the dependence of the resulting spectra on the stellar parameters in terms of infrared two color diagrams. Application of these model calculations to the prominent infrared object IRC +10216 yields best agreement with the observed spectrum and the visibility data at maximum light for the stellar parameters M(stellar) = 0.7 solar mass, L(stellar) = 2.4 x 10(exp 4) solar luminosity, T(stellar) = 2010K and a carbon to oxygen ratio of epsilon(sub c)/epsilon(sub o) = 1.40, which corresponds to a mass-loss rate of M-dot = 8 x 10(exp -5) solar mass/yr. In this model only amorphous carbon grains are considered as the main opacity source. From this model a distance to IRC +10216 of d = 170pc is deduced. The total mass contained in the circumstellar dust shell implies and initial main sequence mass of M(sub ZAMS) greater than or = 1.3 solar mass for IRC +10216.

Winters, J. M.↗
NASA NTRS2023

Finding the magnetopause location using soft X-ray observations and a statistical inverse method

Variability in the location and shape of the dayside magnetopause is attributed to magnetic reconnection, a fundamental process that enables the transfer of mass, energy, and momentum from the solar wind into the magnetosphere. The spatial and temporal properties of the magnetopause, under varying solar and magnetospheric conditions, remain largely unknown because empirical studies using in-situ observations are challenging to interpret. Global wide field-of-view (FOV) imaging is the only means to simultaneously observe the spatial distribution of the plasma properties over the vast dayside magnetospheric region and, subsequently, quantify the energy transport from the interplanetary medium into the terrestrial magnetosphere. Two upcoming missions, ESA/CAS SMILE and NASA’s LEXI will provide wide-field imagery of the dayside magnetosheath in soft X-rays, an emission generated by charge exchange interactions between high charge-state heavy ions of solar wind origin and exospheric neutral atoms. High-cadence two-dimensional observations of the magnetosheath will allow the estimation of dynamic properties of its inner boundary, the magnetopause, and enable studies of its response to changes in the solar wind dynamic pressure and interplanetary magnetic field orientation. This work introduces a statistically-based estimation approach based on inverse theory to estimate the spatial distribution of magnetosheath soft X-ray emissivities and, with this, identify the location of the magnetopause over the Sun−Earth line. To do so, we simulate the magnetosheath structure using the MHD-based OpenGGCM model and generate synthetic soft X-ray images using LEXI’s orbit and attitude information. Our results show that 3-D estimations using the described statistically-based technique are robust against Poisson-distributed shot noise inherent to soft X-ray images. Also, our proposed methodology shows that the accuracy of both three-dimensional (3-D) estimation and the magnetopause standoff distance calculation highly depends on the observational point.

Gonzalo Cucho-Padin↗