Search NASA⌕ Search

SEARCH · Search NASA

Results for “tandem solar cell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Performance measurement of emerging 3- and 4-terminal tandem solar cells

Tandem solar cells are not limited to the conventional two-terminal (2-T) configuration. Multi-terminal designs like three-terminal (3-T) and four-terminal (4-T) devices have gained increasing attention in the PV community due to their relaxed current-matching requirement between subcells and their potential for enhanced energy yield. However, reliable and standardized methods for evaluating the performance of multi-terminal tandems remain underdeveloped. This work addresses this gap by providing comprehensive measurement guidelines tailored to these advanced configurations. We examine key coupling mechanisms between subcells, including the shared electrical load in 3-T devices and optical luminescent coupling in both 3-T and 4-T devices, to enable accurate and consistent performance evaluation. Furthermore, we propose two stabilized measurement methods for emerging 3-T tandem cells incorporating perovskite subcells: (1) a two-dimensional maximum-power-point tracking (MPPT) approach that continuously tracks both subcells' maximum power points (P MAX ) until convergence to stabilized outputs, and (2) a hybrid approach that combines MPPT for one subcell with stabilized current recording under fixed voltage biases near the P MAX of the other, allowing robust extraction of the overall stabilized P MAX (termed “MPPT + asymptotic P MA X scan” method). These methods directly address the dynamic current responses inherent to perovskite-containing tandems, providing a foundation for meaningful and reproducible performance comparisons.

14 SOLAR ENERGY↗
NASA NTRS1990

Development of high-performance GaInAsP solar cells for tandem solar cell applications

Recent results in the development of high-efficiency, low-bandgap GaInAsP solar cells epitaxially grown and lattice matched on InP substrates are presented. Such cells are intended to be used as optimum bottom cell components in tandem solar cells. Assuming that a GaAs-based top cell is used, computer simulation of the potential bottom cell performance as a function of the cell bandgap and incident spectrum indicates that two particular alloys are desirable: Ga0.47In0.53As (Eg = 0.75 eV) for space applications and Ga0.25In0.75As0.54P0.46 (Eg = 0.95 eV) for terrestrial applications. In each of these materials, solar cells with new record-level efficiencies have been fabricated. The efficiency boost available to tandem configurations from these low-bandgap cells is discussed.

Wanlass, M. W.↗
DOE OSTI2024

Exploring the Feasibility and Performance of Perovskite/Antimony Selenide Four-Terminal Tandem Solar Cells

The tandem solar cell presents a potential solution to surpass the Shockley–Queisser limit observed in single-junction solar cells. However, creating a tandem device that is both cost-effective and highly efficient poses a significant challenge. In this study, we present proof of concept for a four-terminal (4T) tandem solar cell utilizing a wide bandgap (1.6–1.8 eV) perovskite top cell and a narrow bandgap (1.2 eV) antimony selenide (Sb 2 Se 3 ) bottom cell. Using a one-dimensional (1D) solar cell capacitance simulator (SCAPS), our calculations indicate the feasibility of this architecture, projecting a simulated device performance of 23% for the perovskite/Sb 2 Se 3 4T tandem device. To validate this, we fabricated two wide bandgap semitransparent perovskite cells with bandgaps of 1.6 eV and 1.77 eV, respectively. These were then mechanically stacked with a narrow bandgap antimony selenide (1.2 eV) to create a tandem structure, resulting in experimental efficiencies exceeding 15%. The obtained results demonstrate promising device performance, showcasing the potential of combining perovskite top cells with the emerging, earth-abundant antimony selenide thin film solar technology to enhance overall device efficiency.

14 SOLAR ENERGY↗
DOE OSTI2024

Diamine chelates for increased stability in mixed Sn–Pb and all-perovskite tandem solar cells

Perovskite tandem solar cells show promising performance but non-radiative recombination and its progressive worsening with time, especially in the mixed Sn–Pb low-bandgap layer, limit performance and stability. Here, in this study, we find that mixed Sn–Pb perovskite thin films exhibit a compositional gradient, with an excess of Sn on the surface – and we show this gradient exacerbates oxidation and increases the recombination rate. We find that diamines preferentially chelate Sn atoms, removing them from the film surface and achieving a more balanced Sn:Pb stoichiometry, making the surface of the film resistive to the oxidation of Sn. The process forms an electrically resistive low-dimensional barrier layer, passivating defects and reducing interface recombination. Further improving the homogeneity of the barrier layer using 1,2-diaminopropane results in more uniform distribution and passivation. Tandems achieve a power conversion efficiency of 28.8%. As a result, encapsulated tandems retain 90% of initial efficiency following 1000 hours of operating at the maximum power point under simulated one-sun illumination in air without cooling.

14 SOLAR ENERGY↗
DOE OSTI2023

Reverse-Bias Resilience of Monolithic Perovskite/Silicon Tandem Solar Cells

Metal halide perovskites have rapidly enabled a range of high-performance photovoltaic technologies. However, catastrophic failure under reverse voltage bias poses a roadblock for their commercialization. In this work, we conduct a series of stress tests to compare the reverse-bias stability of perovskite single-junction, silicon single-junction, and monolithic perovskite/silicon tandem solar cells. We demonstrate that the tested perovskite/silicon tandem devices are considerably more resilient against reverse bias compared with perovskite single-junction devices. The origin of such improved stability stems from the low reverse-bias diode current of the silicon subcell. This translates to dropping most of the voltage over the silicon subcell, where such a favorable voltage distribution protects the perovskite subcell from reverse-bias-induced degradation. These results highlight that, compared with other perovskite technologies, monolithic perovskite/silicon tandems are at a higher technology readiness level in terms of tackling the reverse bias and partial shading challenges, which is a considerable advantage toward commercialization.

halide perovskite↗
DOE OSTI2022

Optimal interconnection of three-terminal tandem solar cells

Three-terminal (3T) tandem solar cells require an adapted module integration scheme in order to explore their full efficiency potential. The three terminals allow to extract the power of the top and bottom cell separately. In a cell string, the wide bandgap top cells are interconnected in parallel to multiple bottom cells resulting in a parallel/series interconnection. This interconnection scheme affects the operation of the subcells, the resulting current path between the subcells, the layout of the cell interconnects, and the system level. Here, we analyze by simulations and experiments the aspects of the module integration of series- and reverse-connected 3T cells with their practical impact on module processes and performance as well as the effect of varying voltage ratios on the string-end losses. If the subcells are connected in series, the module integration requires insulation layers and significantly longer interconnects compared to devices with reverse-connected subcells. Tandem devices with a reverse connection and a voltage ratio between top and bottom cell of 2:1 allow a lean interconnection design and low integration losses. Here, we present an approach for the integration of bypass diodes for the protection against shading effects that allow to minimize string-end and shading losses for a system of modules featuring 3T cells.

14 SOLAR ENERGY↗
DOE OSTI2023

Recycling Silicon Bottom Cells from End-of-Life Perovskite–Silicon Tandem Solar Cells

Perovskite-silicon tandem cells have shown much higher efficiencies than the single junction cells, which promises further reduction of energy cost from photovoltaics. Due to the protection by perovskites, silicon subcells in perovskite-silicon tandem cells may last much longer than they are designed for single junction devices. Here we report recycling silicon bottom cells from end-of-life perovskite-silicon tandem solar cells which further reduce their cost and enhance the sustainability. We demonstrate that silicon bottom cells can be recycled from end-oflife tandem cells by thermal delamination and chemical cleaning processes. The optoelectronic properties of silicon bottom cells were shown largely unchanged at the end-of-life tandem cells. The tandem cells refurbished from recycled silicon bottom cells show comparable efficiencies with those fabricated from fresh ones.

14 SOLAR ENERGY↗
NASA NTRS1994

Calculation of near optimum design of InP/In(0.53)Ga(0.47)As monolithic tandem solar cells

An analysis of InP/GaAs tandem solar cell structure has been undertaken to allow for maximum AMO conversion efficiencies (space applications) while still taking into account both the theoretical and technological limitations. The dependence of intrinsic and extrinsic parameters such as diffusion lengths and generation-recombination (GR) lifetimes on N/P and P/N devices performances are clearly demonstrated. We also report for the first time the improvement attainable through the use of a new patterned tunnel junction as the inter cell ohmic interconnect. Such a design minimizes the light absorption in the interconnect region and leads to a noticeable increase in the cell efficiency. Our computations predict 27 percent AMO efficiency for N/P tandems with ideality factor gamma = 2 (GR lifetimes approximately equal 1 micron), and 36 percent for gamma = 1 (GR lifetimes approximately equals 100 microns). The method of optimization and the values of the physical and optical parameters are discussed.

Renaud, P.↗
NASA NTRS1991

Two-terminal monolithic InP-based tandem solar cells with tunneling intercell ohmic connections

A monolithic two-terminal InP/InGaAsP tandem solar cell was successfully fabricated. This tandem solar cell consists of a p/n InP homojunction top subcell and a 0.95 eV p/n InGaAsP homojunction bottom subcell. A patterned 0.95 eV n(+)/p(+) InGaAsP tunnel diode was employed as an intercell ohmic connection. The solar cell structure was prepared by two-step liquid phase epitaxial growth. Under one sun, AM1.5 global illumination, the best tandem cell delivered a conversion efficiency of 14.8 pct.

Shen, C. C.↗
DOE OSTI2026

Hole-Transport Layer for High Current Density and Stability of Sn-Pb Perovskites and All-Perovskite Tandem Solar Cells

Sn-Pb perovskites are essential for achieving efficient single-junction solar cells and all-perovskite tandem solar cells (APTSCs). Although Sn oxidation and defective surfaces were once major limitations, recent advances in intrinsic material quality have largely mitigated these issues. As a result, the HTL-related interface is now regarded as the primary bottleneck for device performance. To address the intrinsic drawbacks of PEDOT:PSS, chemical surface modification and additive strategies have been widely applied, and alternative HTLs, like polymeric, inorganic, or small-molecule HTLs, have also gained attention. These approaches offer improved energy-level alignment, high transparency, and enhanced chemical durability, leading to higher short-circuit current density and longer operational lifetime in both single-junction and tandem devices. In this Perspective, we highlight the key criteria and practical effects of HTL materials suitable for Sn-Pb perovskites.

14 SOLAR ENERGY↗
DOE OSTI2022

Photoactivated p-Doping of Organic Interlayer Enables Efficient Perovskite/Silicon Tandem Solar Cells

Solution-processed organic semiconductor layers on rough surfaces tend to vary widely in thickness, significantly hindering charge extraction in relevant optoelectronic devices. Herein, we report the photoactivated p-doping of hole-transporting material (HTM) to enhance hole extraction for (textured) perovskite/silicon tandem solar cells, making the device performance less sensitive to the variation of hole transport layer thickness. We used the ionic compound 4-isopropyl-4'-methyldiphenyliodonium tetrakis(penta-fluorophenyl-borate) (DPI-TPFB) as a p-type dopant in poly(triaryl amine) (PTAA), which we used as the HTM. We observed that light soaking DPI-TPFB-doped PTAA shows approximately 22 times higher conductivity compared with an undoped PTAA film, which translated into an improved fill factor (FF) for tandem solar cells. Our tandem solar cells achieved an ~80% FF and 27.8% efficiency and operated at their maximum power point for 200 h without loss of performance, in addition to retaining ~83% of initial performance over a month of operation in an outdoor environment.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,S↗
DOE OSTI2022

Optically thick GaInAs/GaAsP strain-balanced quantum-well tandem solar cells with 29.2% efficiency under the AM0 space spectrum

GaAs is often used as a multijunction subcell due to its high material quality on GaAs substrates, despite having a non-optimal bandgap. The bandgap can be beneficially reduced using many layers of thin, strain-balanced GaInAs in a superlattice or quantum well device, but achieving excellent carrier collection without increased recombination has proven challenging. Here, we develop and demonstrate high performance, optically thick GaInAs/GaAsP strain-balanced solar cells. Excellent material quality is achieved in thick superlattices by using growth conditions that limit progressive thickness and composition fluctuations. Bandgap-voltage offsets as low as 0.31V are shown in superlattice cells using thin, highly strained GaP barriers. Optically thick superlattice cells with over 2500 nm of total GaInAs in the depletion region are developed, enabling 3.8 mA/cm 2 of extra photocurrent beyond the GaAs band edge under the AM0 space spectrum. Optimized superlattice solar cells are incorporated into two-junction devices that achieve 29.2% efficiency under the AM0 space spectrum due to their improved bandgap combination and high subcell voltages.

14 SOLAR ENERGY↗
DOE OSTI2024

Photoluminescence Excitation Spectroscopy of Monolithic Perovskite/Silicon Tandem Solar Cells

The contributions of each subcell to the total photoluminescence (PL) spectrum of a monolithic perovskite/silicon tandem solar cell are distinguished using a variable wavelength excitation laser source. Here, in the results, a strong overlap of the PL spectrum is shown, originating from the sub‐bandgap region of the perovskite top cell with the emission from the silicon bottom cell, even with near‐infrared excitation wavelengths. Consequently, an excitation laser wavelength of at least 815 nm is required for a dominant PL signal from the silicon bottom cell, and a wavelength no longer than 750 nm is needed for a dominant PL signal from the perovskite top cell in the investigated tandem solar cell. Moreover, a shoulder in the sub‐bandgap emission of the perovskite top cell almost coincides with the PL response region of the silicon bottom cell, which can cause signal confusion in subcell characterization.

14 SOLAR ENERGY↗
DOE OSTI2022

Carrier control in Sn–Pb perovskites via 2D cation engineering for all-perovskite tandem solar cells with improved efficiency and stability

All-perovskite tandem solar cells are promising for achieving photovoltaics with power conversion efficiencies above the detailed balance limit of single-junction cells, while retaining the low cost, light weight and other advantages associated with metal halide perovskite photovoltaics. However, the efficiency and stability of all-perovskite tandem cells are limited by the Sn-Pb-based narrow-bandgap perovskite cells. Here we show that the formation of quasi-two-dimensional (quasi-2D) structure (PEA) 2 GAPb 2 I 7 from additives based on mixed bulky organic cations phenethylammonium (PEA+) and guanidinium (GA+) provides critical defect control to substantially improve the structural and optoelectronic properties of the narrow-bandgap (1.25 eV) Sn-Pb perovskite thin films. Additionally, this 2D additive engineering results in Sn-Pb-based absorbers with low dark carrier density (~1.3 x 10 14 cm -3 ), long bulk carrier lifetime (~9.2 us) and low surface recombination velocity (~1.4 cm s -1 ), leading to 22.1%-efficient single-junction Sn-Pb perovskite cells and 25.5%-efficient all-perovskite two-terminal tandems with high photovoltage and long operational stability.

14 SOLAR ENERGY↗
DOE OSTI2024

Ultra-High Efficiency and Stable All-Perovskite Tandem Solar Cells

In the project period, the research team has fabricated more than 6,000 single-junction wide-bandgap (wide-E g ) and low-bandgap (low-E g ) perovskite solar cells (PSCs) and more than 2,000 all-perovskite tandem solar cells (APTSCs). The best-performing wide-E g and low-E g PSCs and APTSCs showed PCEs greater than 19%, 23%, and 30%, respectively. The average PCEs for wide-E g and low-E g PSCs and APTSCs fabricated by the benchmark processes are (18.5 ± 0.4)%, (21.9 ± 0.8)%, and (26.8 ± 2.1)%, respectively. We have demonstrated APTSCs with T 80 lifetime of more than 1,000 h, which were measured by maximum power point tracking (MPPT) under one sun operation in the air. The team has also utilized various advanced characterization techniques to study the optical and electrical properties of wide-E g and low-E g perovskite materials and devices, developing a better understanding of the unique working principle and degradation mechanism of APTSCs. The team has met most GNG decision criteria except for the stability goal of APTSCs under 85 °C/85 RH accelerated lifetime test (ALT). The shortfall of the device ALT stability is mainly limited by the intrinsic instability of Sn-Pb perovskites under illumination at elevated temperatures. The team discussed with stakeholders in the PV academic and industry about these durability concerns and concluded that this is the major technical barrier preventing the market entry of APTSCs. Future fundamental study and R&D work are needed to advance this promising technology.

14 SOLAR ENERGY↗
NASA NTRS1988

High efficiency GaAs/Ge monolithic tandem solar cells

Two-terminal monolithic tandem cells consisting of a GaAs solar cell grown epitaxially on a Ge solar cell substrate are very attractive for space applications. Tandem cells of GaAs grown by metal-organic chemical vapor deposition on thin Ge were investigated to address both higher efficiency and reduced weight. Two materials growth issues associated with this heteroepitaxial system, autodoping of the GaAs layers by Ge and diffusion of Ga and As into the Ge substrate, were addressed. The latter appears to result in information of an unintentional p-n junction in the Ge. Early simulator measurements gave efficiencies as high as 21.7 percent for 4 cm2 GaAs/Ge cells, but recent high-altitude testing has given efficiencies of 18 percent. Sources of errors in simulator measurements of two-terminal tandem cells are discussed. A limiting efficiency of about 36 percent for the tandem cell at AMO was calculated. Ways to improve the performance of present cells, primarily by increasing the Isc and Voc of the Ge cell, are proposed.

Tobin, S. P.↗
DOE OSTI2024

Perovskite/Silicon Tandem Solar Cells: Insights and Outlooks

Organic-inorganic hybrid perovskites have been widely used in silicon-based tandem solar cells for their advantages of tunable bandgap, high light absorption coefficient, and high power conversion efficiency (PCE). However, the maximum PCE of perovskite/silicon tandem solar cells (PSTSCs) is still below the theoretical limit. This Review describes the PSTSCs' working principle and then summarizes the research progress in recent years, including a comparison of perovskite layers, interconnection layers, and silicon bottom cells. Then, the n-i-p PSTSCs and p-i-n PSTSCs are presented based on the PSCs' top cells, and the main factors affecting the efficiency of PSTSCs are discussed in detail. Finally, an outlook on the future development of PSTSCs is discussed.

electrical conductivity↗
NASA NTRS1994

Electron-irradiated two-terminal, monolithic InP/Ga0.47In0.53As tandem solar cells and annealing of radiation damage

Radiation damage results from two-terminal monolithic InP/Ga(0.47)In(0.53)As tandem solar cells subject to 1 MeV electron irradiation are presented. Efficiencies greater than 22 percent have been measured by the National Renewable Energy Laboratory from 2x2 sq cm cells at 1 sun, AMO (25 C). The short circuit current density, open circuit voltage and fill factor are found to tolerate the same amount of radiation at low fluences. At high fluence levels, slight differences are observed. Decreasing the base amount of radiation at the Ga(0.47)In(0.53)As bottomcell improved the radiation resistance of J(sub sc) dramatically. This is turn, extended the series current flow through the subcell substantially up to a fluence of 3x10(exp 15) cm(exp -2) compared to 3x10(exp 14) cm(exp -2), as observed previously. The degradation of the maximum power output form tandem device is comparable to that from shallow homojunction (SHJ) InP solar cells, and the mechanism responsible for such degradation is explained in terms of the radiation response of the component cells. Annealing studies revealed that the recovery of the tandem cell response is dictated by the annealing characteristics exhibited by SHJ InP solar cells.

Cotal, H. L.↗