Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature programmed desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Volatility Basis Set Distributions and Viscosity of Organic Aerosol Mixtures: Insights from Chemical Characterization Using Temperature-Programmed Desorption–Direct Analysis in Real-Time High-Resolution Mass Spectrometry

Quantitative assessment of gas-particle partitioning of individual components within complex atmospheric organic aerosols (OA) mixtures is critical for predicting and comprehending the formation and evolution of OA particles in the atmosphere. This investigation leverages previously documented data obtained through a temperature programmed desorption - direct analysis in real time – high resolution mass spectrometry (TPD-DART-HRMS) platform. This methodology facilitates the bottom-up construction of volatility basis set (VBS) distributions for constituents found in three biogenic secondary organic aerosol (SOA) mixtures produced through the ozonolysis of a-pinene, limonene, and ocimene. The apparent enthalpies (ΔH*, kJ mol -1 ) and saturated vapor mass concentrations (C T *, µg∙m -3 ) of individual SOA components, determined as a function of temperature (T, K), facilitated an assessment of changes in VBS distributions and gas-particle partitioning with respect to T and atmospheric total organic mass loadings (tOM, µg∙m -3 ). Further, the VBS distributions reveal distinct differences in volatilities among monomers, dimers, and trimers, enabling their categorization into separate volatility bins. At the ambient temperature of T = 298 K, only monomers efficiently partition between gas and particle phases across a broad range of atmospherically relevant total organic mass loadings (tOM) values of 1–100 µg∙m -3 . Partitioning of dimers and trimers becomes notable only at T > 360 K and T > 420 K, respectively. The viscosity of SOA mixtures is assessed using a bottom-up calculation approach, incorporating the input of elemental formulas, ΔH*, C T *, and particle-phase mass fractions of the SOA components. Through this approach, we are able to accurately estimate the variations in SOA viscosity that result from the evaporation of its components. These variations are, in turn, influenced by atmospherically relevant changes in tOM and T. Comparison of the calculated SOA viscosity and diffusivity values with literature reported experimental results shows close agreement, thereby validating the employed calculation approach. These findings underscore the significant potential for TPD-DART-HRMS measurements in enabling the untargeted analysis of organic molecules within OA mixtures. This approach facilitates quantitative assessment of their gas-particle partitioning and allows for the estimation of their viscosity and condensed-phase diffusion, thereby contributing valuable insights to atmospheric models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanistic Insights into Nonoxidative Ethanol Dehydrogenation on NiCu Single-Atom Alloys

Ethanol dehydrogenation presents a promising pathway towards the production of acetaldehyde, a valuable building block in chemicals production. Under non-oxidative conditions, the reaction is facilitated by supported Cu nanoparticles which afford reasonable activity and high selectivity. The stability issues associated with Cu nanoparticle sintering can be addressed by the addition of small amounts of Ni, which further boost reactivity while retaining selectivity. Despite the promise of NiCu single-atom alloys for non-oxidative ethanol dehydrogenation, little is known about the role of each component and the pathway of this mechanistically complex process. Herein, kinetic investigations from reactor tests identify C-H bond scission as the rate limiting step, while 1-hydroxyethyl is detected as the intermediate via IR spectroscopy. Temperature program desorption studies are employed to examine the effect of Ni coverage and to demonstrate that Ni atoms activate ethanol selectively at lower temperatures, resulting in higher acetaldehyde yield than pure Cu. Temperature program desorption experiments also reveal the spillover of intermediates from the Ni atom to neighboring Cu sites as a relevant step in the reaction pathway. Density functional theory calculations are used to investigate the 2 reaction energetics and to confirm that C-H bond scission is the initial reaction step, while a clear effect of H 2 partial pressure on the reaction pathway is realized. Further, counter to the expected behavior that all reaction steps take place on the Ni atoms, our degree of rate control analysis reveals that a mechanism involving spillover of the 1-hydroxyethyl intermediate from the Ni atom to the Cu surface, where it will dehydrogenate further, is more likely. Furthermore, our combined kinetic, spectroscopic, and theoretical approach sheds light on this complex reaction mechanism and represents a promising method for the understanding and designing of highly active, selective, and stable single-atom alloys for other multistep catalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Deactivation of Mo/H-ZSM-5 in Microwave-Assisted and Thermal-Driven Methane Dehydroaromatization

A better understanding of catalyst deactivation is needed to improve catalyst design and performance in microwave-enhanced methane dehydroaromatization (MDA). Here, this study investigates the deactivation of a molybdenum supported H-ZSM-5 zeolite (Mo/H-ZSM-5) catalyst in MDA under microwave-heated conditions, comparing its performance to that of the same catalyst under conventional heating. While the microwave-assisted (MW) process achieved higher benzene yields, the catalyst experienced faster deactivation due to the selective and rapid deposition of coke within the pores of the zeolite, as confirmed through Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), ammonia-temperature programmed desorption (NH 3 -TPD), thermal gravimetric analysis (TGA), temperature programmed oxidation (TPO), and X-ray photoelectron spectroscopy (XPS) analyses. The quantification of total coke content via TGA/TPO and surface carbon (XPS) revealed that nearly twice as much coke was deposited on the catalyst under MW conditions compared to that on the conventionally heated material, and the coke exhibited a more conductive and graphitic nature. The accelerated deactivation rates were attributed to the formation of hot spots in the MW system, leading to enhanced coupling with coke formed in situ during the reaction and resulting in increased Mo reduction. Observations indicated that the CO activation used to carburize the catalyst prior to the reaction is not advantageous in the MW heating environment. The presence of large amounts of Mo oxides at elevated temperatures (through hot spots) exposed to methane leads to instability under the reaction conditions. Optimizing the activation environment and improvement of the Mo dispersion within the pores are potential strategies to improve catalyst stability.

Mo/H-ZSM-5 zeolite↗
DOE OSTI2023

Effect of the Molecular Structure of Surface Vanadia on Activity and Regenerability of VO $x$ /In 2 O 3 Catalysts for CO 2 -Assisted Oxidative Dehydrogenation of Propane

Our recent work has reported that higher propylene selectivity and improved stability can be achieved by combining redox-active VO $x$ and basic In 2 O 3 for CO 2 -assisted oxidative dehydrogenation of propane (CO 2 -ODHP). In the present work, we continued to explore the stability and regenerability of V/In catalysts. In particular, our interest lies in identifying the effect of mono- and polyvanadate on catalytic performance and regenerability. A V/In catalyst with an increased proportion of monovanadate was prepared using the Schlenk line under moisture-free conditions (V/In–S), while the fully polymerized vanadate catalyst was prepared through a regular impregnation (V/In) for comparison. The Schlenk-line-prepared catalyst, namely, V/In–S, not only exhibits a 17–30% enhanced propylene yield at high temperatures (500–540 °C) over V/In but also presents improved stability and regenerability with nearly 88% activity recovered after regeneration in O 2 . Detailed characterizations have been performed to reveal the catalyst structure–performance relationship, including chemisorption (NH 3 /CO 2 -temperature-programmed desorption, NH 3 /CO 2 -TPD), H 2 -temperature-programmed reduction (H 2 -TPR), and spectroscopic studies [Raman spectroscopy, UV–vis diffuse reflectance spectroscopy (UV–vis DRS), near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS), and high-sensitivity low-energy ion scattering (HS-LEIS)]. Characterization results demonstrate that compared with polyvanadates, monovanadates lead to strengthened interaction with In 2 O 3 and a more stabilized V/In surface and subsurface, as well as improved redox properties of VO $x$ . These advantages give rise to the observed enhancement in activity, stability, and regenerability. In conclusion, these findings advance the understanding of the relationship between the activity/stability and the molecular structure of surface oxide species (vanadia) and the interplay between acid–base interactions and redox properties of mixed metal-oxide catalysts for efficient CO 2 -ODHP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of Surface Temperature on the Distribution and Reactivity of Rh Active Sites for CO Oxidation

Single–atom catalysts are a fast–emerging area in which late–transition metal atoms are supported on oxides, metals, and carbonaceous supports. They show great promise for selective chemical reactions due to their well–defined active sites, and significantly reduce precious metal loading. However, oxide–supported single–atom catalysts have drawbacks such as deactivation due to sintering, and there are on–going debates about the exact nature of the active sites. Herein we report a model system where the surface temperature during Rh deposition on a copper oxide support dictates the Rh size distribution. Here our temperature–programmed desorption experiments reveal that Rh clusters perform CO oxidation at lower temperature than single atoms, and isotopic labelling demonstrates differences in the mechanism in that the C–O bond is broken and reformed on clusters, as opposed to a pure Mars van Krevelen mechanism for CO oxidation at the single–atom Rh sites. We further examine the cluster size distributions with scanning tunneling microscopy and X–ray photoelectron spectroscopy which confirm the presence of both clusters and single atoms for the lower temperature deposition and only single atoms for the higher temperature deposition. Together, these results provide a fundamental understanding of the differences in the CO oxidation mechanism on Rh atoms and clusters.

36 MATERIALS SCIENCE↗
DOE OSTI2024

CO–induced roughening of Cu(111): formation and detection of reactive nanoclusters on metal surfaces

The formation of nanoclusters on metal surfaces in the presence of reactive environments is a phenomenon with important implications for catalysis. These nanoclusters are composed of atoms ejected from undercoordinated sites such as step edges, and their presence alters the catalytic properties of solid materials. We perform density functional theory (DFT) and kinetic Monte Carlo (KMC) simulations to investigate the formation and reactivity of copper clusters on Cu(111). Our results indicate a considerably higher reactivity of small copper nanoclusters, with up to seven atoms in size on roughened copper surfaces than on pristine Cu(111) and Cu(211). Regarding the restructuring events that give rise to nanoclusters under CO atmospheres, we determine that the ejection of Cu atoms from step edges and their migration therefrom to adjacent Cu(111) terraces are, by and large, driven by CO coverage effects. By means of KMC simulations, which account for CO–CO lateral interactions and CO–induced surface restructuring, we show that temperature programmed desorption (TPD) holds promise for the detection of highly reactive nanoclusters. Furthermore, our approach showcases how surface restructuring and surface–adsorbate bond breaking can be combined when modeling surface reactions and contributes to the development of an advanced understanding of the nature of active site under reaction conditions.

catalyst dynamic restructuring↗
DOE OSTI2023

Correlating Experimentally Determined Hydrogen Binding Energy with Hydrogen Evolution Activity over Metal Monolayers on Molybdenum Nitride

It is well established that hydrogen binding energy (HBE) is a key descriptor for hydrogen evolution reaction (HER) activity, and such a relationship is a useful tool for searching efficient and cost-effective HER catalysts. However, in almost all cases, the HBE values are obtained from density functional theory (DFT) calculations. Here in this study, temperature programmed desorption (TPD) was used to experimentally determine the HBE values of metal monolayers supported on molybdenum nitride (Mo 2 N), and electrochemical measurements were performed on the same surfaces. Combined DFT and kinetic Monte Carlo (kMC) simulations were used to validate the trend observed with TPD and the electrochemical HER activity. Depositing one monolayer of Pt on Mo 2 N led to similar HBE values seen for bulk Pt, and electrochemical measurements showed that monolayer Pt on Mo 2 N had similar HER activity to that of bulk Pt. Similar studies were also performed for monolayer Pd on Mo 2 N to confirm the correlation. This work also demonstrates that Mo 2 N is a promising support to reduce precious metal loading in HER catalysts.

08 HYDROGEN↗
DOE OSTI2023

Fabrication of Large-Area Metal-on-Carbon Catalytic Condensers for Programmable Catalysis

Catalytic condensers stabilize charge on either side of a high-k dielectric film to modulate the electronic states of a catalytic layer for the electronic control of surface reactions. Here, carbon sputtering provided for fast, large-scale fabrication of metal–carbon catalytic condensers required for industrial application. Carbon films were sputtered on HfO 2 dielectric/p-type Si with different thicknesses (1, 3, 6, and 10 nm), and the enhancement of conductance and capacitance of carbon films was observed upon increasing the carbon thickness following thermal treatment at 400 °C. After Pt deposition on the carbon films, the Pt catalytic condenser exhibited a high capacitance of ∼210 nF/cm 2 that was maintained at a frequency ∼1000 Hz, satisfying the requirement for a dynamic catalyst to implement catalytic resonance. Temperature-programmed desorption of carbon monoxide yielded CO desorption peaks that shifted in temperature with the varying potential applied to the condenser (−6 or +6 V), indicating a shift in the binding energy of carbon monoxide on the Pt condenser surface. A substantial increase in capacitance (∼2000 nF/cm 2 ) of the Pt-on-carbon devices was observed at elevated temperatures of 400 °C that can modulate ∼10% of charge per metal atom when 10 V potential was applied. A large catalytic condenser of 42 cm 2 area Pt/C/HfO 2 /Si exhibited a high capacitance of 9393 nF with a low leakage current/capacitive current ratio (<0.1), demonstrating the practicality and versatility of the facile, large-scale fabrication method for metal–carbon catalytic condensers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Irreversible oxygen poisoning: Modeling the initial water dissociation kinetics on δ-Pu(111) and δ-Pu(100) through density functional theory

In this work, the initial kinetics of water dissociation on two facets of δ-plutonium, δ-Pu(111) and δ-Pu(100), are explored through density functional theory in order to understand how water dissociation occurs on these facets. We explored the dissociation of water via the formation of hydroxyls, atomic hydrogen, and atomic oxygen species on each facet. We calculate low energetic barriers for water to split to adsorbed hydrogen and hydroxyl species at 0.19 eV for δ-Pu(111) and 0.07 eV for δ-Pu(100). The hydroxyl has a barrier of 0.64 and 0.37 eV to cleave the hydrogen–oxygen bond on δ-Pu(111) and δ-Pu(100), respectively. Due to the highly exergonic adsorption free energy of atomic oxygen of −2.10 eV, the metallic surfaces are found to be fully covered in oxygen, even with the inclusion of oxygen lateral interactions. When combined with the reaction thermodynamics, this free energy of adsorption forms a molecular oxygen desorption barrier greater than 9.51 eV (918 kJ/mol). These results, combined with simulated temperature programed desorption spectra, indicate that oxygen formed via water dissociation on δ-Pu (111) and (100) facets induces an irreversible poison that prevents further reaction of water directly on metallic plutonium surfaces, most likely due to the strong hybridization of the Pu and O valence states. Therefore, these results imply that another mechanism is responsible for the continuously experimentally measured water dissociation, which is most likely due to the Pu oxide.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Cr plasma-material-interaction in PISCES-RF: D thermal release, retention, and erosion

Pure chromium (Cr) targets were exposed to high-flux deuterium (D) plasmas in the Pisces-RF linear plasma device, and measurements of D retention, release, and erosion were subsequently performed. Post-exposure D retention was quantified using temperature-programmed desorption on Cr targets irradiated by 50 eV ions over a broad range of exposure temperatures (423–873 K) and ion fluences (3 × 10 24 – 3 × 10 26 m −2 ). The retained D inventory was observed to decrease rapidly with increased exposure temperature, from approximately ∼7 × 10 20 m −2 at ∼ 420 K, to then saturate near ∼ 10 20 m −2 for exposure temperatures above ∼550 K. Separately, at fixed exposure temperature (∼450 K), D retention was found to have only a weak dependence on increasing ion fluence. Lastly, the erosion of Cr in D plasma was investigated for ion impact energies in the range 40 ≤ E i ≤ 250 eV. Erosion was inferred using optical emission spectroscopy (OES) from the ratio of emission lines (Cr I (425.4 nm)/D I (656.1 nm)) measured close to the target. Conversion of the OES yield data to net erosion yield was made with singular ion energy target mass-loss measurements. These net erosion yield data were then further corrected to obtain gross erosion yield by accounting for a re-deposition factor, computed using a simple model. The gross erosion yield is found to be 2–4 times lower than predicted by SDTrimSP, consistent with that typically observed for light-ion sputtering under high-flux plasma conditions.

Chromium↗
NASA NTRS1985

Method for measuring surface activity of silicon nitride powder

Amorphous, alpha-, and beta-Si3N4 powders were activated by vibration ball milling in purified MeOH, and the surface activity of ground powders was determined by the temperature programmed desorption (TPD) method using NH3 gas. The concentration of active sites with a potential energy equivalent to the peak temperature in the spectrum increased was markedly by ball milling the amorphous Si3N4. The alpha- and beta-Si3N4 also had active sites produced by ball milling. The concentration of active site increased with increased ball milling time. A method for measuring surface activity of ceramic raw materials by TPD is proposed.

Kanno, Y.↗
DOE OSTI2024

Bond Selective Photochemistry at Metal Nanoparticle Surfaces: CO Desorption from Pt and Pd

The use of visible photon fluxes to influence catalytic reactions on metal nanoparticle surfaces has attracted attention based on observations of reaction mechanisms and selectivity not observed under equilibrium heating. These observations suggest that photon fluxes can selectively impact the rates of certain elementary steps, creating nonequilibrium energy distributions among various reaction pathways. However, quantitative studies validating these hypotheses on metal nanoparticle surfaces are lacking. Here, we examine the influence of continuous wave visible photon fluxes on the CO desorption rates from 1 to 2 nm diameter Pt and Pd nanoparticle surfaces supported on γ-Al 2 O 3 . Temperature-programmed desorption measurements quantified via diffuse reflectance infrared Fourier transform spectroscopy demonstrate that visible photon fluxes significantly enhanced the rate of CO desorption from Pt nanoparticles in a wavelength-dependent manner. 440 nm photons most efficiently promoted CO desorption from Pt nanoparticle surfaces, aligning with the excitation energy for the interfacial electronic transition within the Pt–CO bond. Conversely, visible photon fluxes had no measurable influence on CO desorption rates from Pd nanoparticle surfaces after accounting for photon-induced heating. Density functional theory calculations demonstrate that the Pt–CO bond exhibits a narrower LUMO resonance, stronger coupling between the photoexcitation and forces induced on the metal–C bond, and vibrational energy dissipation that more effectively couples to desorption as compared to Pd–CO. These results demonstrate the specificity photons provide in facilitating chemical reactions on metal nanoparticle surfaces and substantiate the idea that photon fluxes can steer processes and outcomes of catalytic reactions in ways not achievable by equilibrium heating.

desorption↗
DOE OSTI2025

Mechanistic insights into N 2 O formation as a side product in NH 3 -SCR over small pore Cu-zeolites

Here, the present contribution provides clarity to N 2 O formation mechanisms and key influencing factors during low temperature NH 3 -SCR, with the goal of enabling the rational design of advanced SCR catalysts with low greenhouse gas impact. By studying more than 50 small pore Cu-exchanged zeolite SCR catalyst samples, including model catalysts synthesized in our laboratories and state-of-the-art industrial catalysts, we explored a wide range of factors affecting N 2 O formation. These factors included Cu loading, support Si/Al ratio, support topology, catalyst aging, reaction temperature and reactant feed composition effects. We probed N 2 O formation under both steady-state SCR, and during NH 4 NO 3 decomposition via temperature programmed desorption (TPD). Finally, we used DFT to probe energetics of possible N 2 O formation pathways. Based on these studies, we confirm that low temperature N 2 O formation occurs via multiple reaction pathways that all involve NH 4 NO 3 and are supported by Cu moieties that facilitate in-situ NO oxidation to NO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1988

Effect of substrate preparation on the structure and chemisorption properties of Pd/MgO model catalyst

Pd/MgO model catalysts are prepared by vapor deposition of Pd particles on MgO thin films which are deposited, at different temperatures, on UHV cleaved mica. MgO films and Pd particles are characterized in situ by Auger electron spectroscopy and energy-loss spectroscopy and ex situ by transmission electron microscopy. Succesive temperature programmed desorption (TPD) of CO shows a different evolution of the morphology of the Pd particles deposited on MgO films prepared at low and high temperature. In addition, on MgO prepared at low temperature, the smallest particles show a continuous decay of CO adsorption during TPD due to contamination by support species.

Henry, C. R.↗
NASA NTRS1992

Studies of the kinetics and mechanisms of perfluoroether reactions on iron and oxidized iron surfaces

Polymeric perfluoroalkylethers are being considered for use as lubricants in high temperature applications, but have been observed to catalytically decompose in the presence of metals. X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption (TPD) were used to explore the decomposition of three model fluorinated ethers on clean polycrystalline iron surfaces and iron surfaces chemically modified with oxygen. Low temperature adsorption of the model fluorinated ethers on the clean, oxygen modified and oxidized iron surfaces was molecular. Thermally activated defluorination of the three model compounds was observed on the clean iron surface at remarkably low temperatures, 155 K and below, with formation of iron fluoride. Preferential C-F bond scission occurred at the terminal fluoromethoxy, CF3O, of perfluoro-1-methoxy-2-ethoxy ethane and perfluoro-1-methoxy-2-ethoxy propane and at CF3/CF2O of perfluoro-1,3-diethoxy propane. The reactivity of the clean iron toward perfluoroalkylether decomposition when compared to other metals is due to the strength of the iron fluoride bond and the strong electron donating ability of the metallic iron. Chemisorption of an oxygen overlayer lowered the reactivity of the iron surface to the adsorption and decomposition of the three model fluorinated ethers by blocking active sites on the metal surface. Incomplete coverage of the iron surface with chemisorbed oxygen results in a reaction which resembles the defluorination reaction observed on the clean iron surface. Perfluoro-1-methoxy-2-ethoxy ethane reacts on the oxidized iron surface at 138 K, through a Lewis acid assisted cleavage of the carbon oxygen bond, with preferential attack at the terminal fluoromethoxy, CF3O. The oxidized iron surface did not passivate, but became more reactive with time. Perfluoro-1-methoxy-2-ethoxy propane and perfluoro-1,3-diethoxy propane desorbed prior to the observation of decomposition on the oxidized iron surface.

Napier, Mary E.↗