Search NASA⌕ Search

SEARCH · Search NASA

Results for “tetrataenite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

16 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

A study of tetrataenite

The tetrataenite in Dayton was examined using conventional transmission (TEM) and analytical electron microscopy (AEM). Tetrataenite was also simulated in terrestrial Fe-Ni alloys through electron irradiation of thin-foil specimens on the high voltage electron microscope (HVEM). The purpose was to correlate the results of the TEM, AEM and HVEM studies on Dayton and on terrestrial iron-nickel alloys to the low temperature iron-nickel phase diagram. Oxide forms spontaneously on the surfaces of thin-foil iron-nickel specimens. By determining the metal/oxide orientation relationships the reflections due to the oxide and the superlattice are distinguished. In Dayaton, the clear taenite (I) is fully ordered until near the cloudy zone interface. The ordered domains ranged in size from 30 to 650 nm with the largest domains corresponding to the highest Ni content and the smallest domain size corresponding to the lowest Ni content. In terrestrial alloys irradiated on the HVEM, the extent of electron irradiation induced ordering was determined as a function of temperature and composition. Ordering occurred in every specimen irradiated.

Reuter, K. B.↗
NASA NTRS2016

Implications for Metallographic Cooling Rates, Derived from Fine-Scale Analytical Traverses Across Kamacite, Taenite, and Tetrataenite in the Butler Iron Meteorite

The "M-shaped" Ni concentrations across Widmanstatten patterns in iron meteorites, mesosiderites, and ordinary chondrites are commonly used to calculate cooling rates. As Ni-poor kamacite exolves from Ni-rich taenite, Ni concentrations build up at the kamacite-taenite interface because of the sluggish diffusivity of Ni. Quantitative knowledge of experimentally-determined Ni diffusivities, coupled with the shape of the M-profile, have been used to allow calculation of cooling rates that pertained at low temperatures, less than or equal to 500 C. However, determining Ni metallographic cooling rates are challenging, due to the sluggish diffusivity of Ni at low temperatures. There are three potential difficulties in using Ni cooling rates at low temperatures: (i) Ni diffusivities are typically extrapolated from higher-temperature measurements; (ii) Phase changes occur at low temperatures that may be difficult to take into account; and (iii) It appears that Ge in kamacite and taenite has continued to equilibrate (or attempted to equilibrate) at temperatures below those that formed the M-shaped Ni profile. Combining Ni measurements with those of other elements has the potential to provide a way to confirm or challenge Ni-determined cooling rates, as well as provide insight into the partitioning behaviors of elements during the cooling of iron meteorites. Despite these benefits, studies that examine elemental profiles of Ni along with other elements in iron meteorites are limited, often due to the low concentration levels of the other elements and associated analytical challenges. The Butler iron meteorite provides a good opportunity to conduct a multi-element analytical study, due to the higher concentration levels of key elements in addition to Fe and Ni. In this work, we perform combined analysis for six elements in the Butler iron to determine the relative behaviors of these elements during the evolution of iron meteorites, with implications for metallographic cooling rates.

Jones, J. H.↗
NASA NTRS1991

Distribution of silicon between kamacite and taenite

Meteorites formed under highly reducing conditions can incorporate substantial amounts of Si in solid solution in their metallic phases. In enstatite meteorites, reduced Si appears in shreibersite, perryite and, in variable amounts, in the kamacite, taenite, and tetrataenite. Microprobe bulk analysis of Si in Fe,Ni particles of aubrites show a large variation from grain to grain; this large compositional range has been attributed to local equilibrium conditions in the specific T and/or fO2 environments in which they are formed. Si concentrations are homogeneous in the kamacite; in contrast, the Ni-rich phases (taenite and tetrataenite) show a characteristic Si profile. Concentrations of this element in tetrataenite are substantially higher than in the adjacent kamacite, and decrease smoothly towards the center of the taenite grain, matching very closely the M-shaped profile of Ni. Other elements with similar distribution patterns are Ge and Cu. A satisfactory explanation for this behavior cannot be given in the absence of experimental data for the diffusion of Si between alpha and gamma-Fe alloys. However, two end-member possibilities can be envisioned: the distribution of Si between kamacite and taenite may be controlled by (1) the crystallographic structure or (2) the chemical composition of the host phases. These possibilities are explored.

Casanova, Ignacio↗
NASA NTRS1994

Shape, size, and distribution of magnetic particles in Bjurbole chondrules

Chondrules from the Bjurbole chondritic meteorite (L4) exhibit saturation remanence magnetization (SIRM) values which vary over three orders of magnitude. REM values (Natural Remanence Magnetization/SIRM) for Allende (C3V) and Chainpur (LL3) are less than 0.01 but in Bjurbole some chondrules were found to have REM values greater than 0.1 with several greater than 0.2. REM values greater than 0.1 are abnormal and cannot be acquired during weak field cooling. If exposure to a strong field (whatever the source) during the chondrules' history is responsible for the high REM values, was such history associated with a different processing which might have resulted in different shape, size, and distribution of metal particles compared to chondrules having REM values of less than 0.01? Furthermore, magnetic hysteresis results show a broad range of magnetic hardness and other intrinsic magnetic properties. These features must be related to (1) size and amount of metal; and (2) properties of, and amount of, tetrataenite in the chondrules (all chondrules thus far subjected to thermomagnetic analysis show the presence of tetrataenite). A scanning electron microscopy (SEM) study is underway to determine the relationship between the shape, size, and distribution of metal particles within individual chondrules and the magnetic properties of these chondrules. Results from the SEM study in conjunction with magnetic property data may also help to discern effects from possible lightning strikes in the nebula prior to incorporation of the chondrules into the parent body.

Nava, David F.↗
NASA NTRS1981

Metallic minerals, thermal histories and parent bodies of some xenolithic, ordinary chondrite meteorites

The metal grains were investigated in the hosts and lithic fragments of various petrologic types in four xenolithic chondrites using reflected-light microscopy and electron-probe analysis. The kamacite, taenite, tetrataenite, and troilite in Weston and Fayetteville have many textures; on a Wood plot of the central Ni content vs dimensions, the taenite content shows scatter if metal grains had cooled at rates of 10-1000 and 1-100 K/Myr through 700 K. In contrast, metallic minerals in Bhola and Mezo-Madaras have uniform textures and plot coherently, indicating cooling rates of 0.1 and 1 K/Myr, respectively, in the 700-600 K range. It is concluded that the host and xenoliths in these chondrites were cooled slowly after compaction; their clasts underwent peak metamorphic temperatures and slow cooling through 700 K in different environments.

Scott, E. R. D.↗
NASA NTRS1980

Allan Hills A77219 - The first Antarctic mesosiderite

The abundance of orthopyroxene, inverted pigeonite, plagioclase, tridymite, kamacite, and tetrataenite, plus the whole rock analysis, indicates that ALHA 77219 is a mesosiderite. The presence of inverted pigeonite rims on orthopyroxene clasts plus the range of Fe/Mg and Fe/Mn ratios for pyroxene and olivine are characteristic of mesosiderites. All the petrographic and chemical data are consistent with classification of ALHA 77219 as a mesosiderite and, because the matrix is fine-grained and little recrystallized, as a subgroup I mesosiderite. The Fe/Mn trends in pyroxenes of mesosiderites such as ALHA 77219 can be explained by igneous fractionation of pyroxene along with metal and subsequent subsolidus reduction in the breccia.

Agosto, W. N.↗
NASA NTRS1983

A three-dimensional study of metal grains in equilibrated, ordinary chondrites

Metal particles in Guarena (H6), Colby (L6) and St. Severin (LL6) were studied by optical microscopy and by electron microprobe analysis. Observations from successive polished sections through the metal particles show that kamacite and taenite grains, which often appear to be isolated particles, are connected directly or by intervening sulfides. Also tetrataenite rims are widest when adjacent to sulfide or kamacite. These observations indicate that transfer of Ni during cooling when kamacite-taenite phase growth takes place does not occur through the silicate phases but proceeds through metal and sulfide phases or along grain boundaries. By utilizing the central Ni content of taenite grains from successive sections, metallographic cooling rates were determined more precisely than by using one arbitrary section. Cooling rates determined in this manner for Guarena, Colby, and St. Severin are 4.3 K, 4.0 K, and 1.0 K per million years, respectively.

Willis, J.↗
NASA NTRS1984

Mossbauer spectroscopy and X-ray diffraction of samples from the Santa Catharina iron meteorite

Conversion electron Mossbauer spectroscopy (CEMS) of samples from the Santa Catharina iron meteorite shows the presence of the ordered iron-nickel phase with 50% Ni, tetrataenite, and of the paramagnetic iron-nickel phase with 25% Ni. The FeNi phase with 50% Ni amounts to 70% of the iron-nickel alloys. Futhermore, the CEM spectra show the presence of small peaks from one or more spinel compounds. These small peaks are more pronounced when regions near the rim of the samples are analyzed. The X-ray diffraction of different areas of the samples, both optically dark and optically light areas, shows the presence of a diffraction pattern from a single f.c.c. lattice with a lattice parameter of a=3.58A This means that the two different Fe-Ni phases seen in the CEMS analysis occupy the same lattice. The X-ray photographs also show the presence of super-structure reflections from the ordered FeNi phase, and that the orientation of the f.c.c. lattice is the same within the whole sample.

Roy-Poulsen, H.↗
NASA NTRS1984

On the chondrite-achondrite transition - Mineralogy and chemistry of Yamato 74160 (LL7)

Petrology, mineralogic properties and contents of major elements and trace elements Ag, Au, Bi, Cd, Co, Cs, Ga, In, Rb, Se, Te, Tl, U and Zn are reported (determined by radiochemical neutron activation analysis) in Yamato 74160, interpreted as an LL7 chondrite. All properties are consistent with this meteorite having been recrystallized and partially melted locally once at temperatures well above 1090 C under conditions such that some minerals (e.g. plagioclase, euhedral pyroxene, tetrataenite) grew from melt pockets and siderophilic and chalcophilic elements were lost by extraction into eutectic melt that drained away. Inhomogeneous plagioclase compositions and mobile element loss suggest shock as the most likely heat source. Yamato 74160, while inferentially chondritic, is a larval achondrite: even higher temperatures and longer times would have been required to cause the separations necessary to transform it to an identifiable achondrite type.

Takeda, H.↗
NASA NTRS1988

A new class of natural magnetic materials - The ordering alloys

It is shown that tetrataenite (approximately FeNi), found in many meteorites, and Josephinite (approximately FeNi3), found in many serpentinized peridotites and possibly in Allende, are atomically ordered alloys. Data are presented, showing magnetic hysteresis loops, coercivity-temperature behavior at cryogenic temperatures, and thermomagnetic curves, that show that these ordered magnetic materials have unique magnetic properties and do not fit the conventional rock magnetism paradigms represented by Fe3O4 serpentinites. The ordered state is characterized by induced magnetic anisotropy, reaching the extreme for the tetragonal truly uniaxial anisotropy in FeNi. It is suggested that these ordered magnetic alloys should be considered a new class of natural magnetic materials.

Wasilewski, Peter↗
NASA NTRS1990

Electron microscopy study of the iron meteorite Santa Catharina

A characterization of the microstructural features of Santa Catharina (SC) from the millimeter to submicron scale is presented. The same specimen was examined using an optical microscope, a scanning electron microscope, an electron probe microanalyzer, and an analytical electron microscope. Findings include the fact that SC metal nodules may have different bulk Ni values, leading to different microstructures upon cooling; that SC USNM 6293 is the less corroded sample, as tetrataenite exists as less than 10 nm ordered domains throughout the entire fcc matrix (it is noted that this structure is the same as that of the Twin City meteorite and identical to clear taenite II in the retained taenite regions of the octahedrites); that SC USNM 3043 has a more complicated microstructure due to corrosion; and that the low Ni phase of the cloudy zone was selectively corroded in some areas and formed the dark regions, indicating that the SC meteorite corrosion process was electrochemical in nature and may involve Cl-containing akaganeite.

Zhang, J.↗
NASA NTRS1994

Metallic copper in ordinary chondrites

Metallic Cu of moderately high purity (approximately 985 mg/g Cu, approximately 15 mg/g Ni) occurs in at least 66% of ordinary chondrites (OC) as heterogeneously distributed, small (typically less than or equal to 20 micrometers) rounded to irregular grains. The mean modal abundance of metallic Cu in H, L and LL chondrites is low: 1.0 to 1.4 x 10(exp -4) vol%, corresponding to only 4 - 5 % of the total Cu in OC whole rocks. In more than 75% of the metallic-Cu-bearing OC, at least some metallic Cu occurs at metallic-Fe-Ni-troilite grain boundaries. In some cases it also occurs within troilite, within metallic Fe-Ni, or at the boundaries these phases form with silicates or chromite. Ordinary chondrites that contain a relatively large number of occurrences of metallic Cu/sq mm have a tendency to have experienced moderately high degrees of shock. Shock processes can cause local melting and transportation of metallic Fe-Ni and troilte; because metallic Cu is mainly associated with these phases, it also gets redistributed during shock events. In the most common petrographic assemblage containing metallic Cu, the Cu is adjacent to small irregular troilite grains surrounded by taenite plus tetrataenite; this assemblage resembles fizzed troilite and may have formed by localized shock melting or remelting of a metal-troilite assemblage.

Rubin, Alan E.↗
NASA NTRS1999

Troilite in the Chondrules of Type-3 Ordinary Chondrites: Implications for Chondrule Formation

The presence of primary troilite in chondrules requires that nebular temperatures were <650 K (the 50% condensation temperature of S) at the time of chondrule formation and that chondrules were molten for periods short enough (less than or equal to 10 s) to avoid significant volatilization of S. We examined 226 intact chondrules of all textural types from eight unshocked to weakly shocked ordinary chondrite falls of low petrologic type to determine the origin of troilite in chondrules; 68 chondrules are from LL3.0 Semarkona. There is a high probability that troilite is primary (i.e , was present among the chondrule precursors) if it is completely embedded in a mafic silicate phenocryst, located within one-half radius of the apparent chondrule center and is part of an opaque assemblage with an igneous texture Based on these criteria, 13% of the chondrules in Semarkona and in the set as a whole contain primary troilite. Most of the remaining chondrules contain troilite that is probably primary, but does not meet all three criteria. Troilite occurs next to tetratacnite in some opaque spherules within low-FeO chondrules in Semarkona, implying that the Ni required to form the tetrataenite came from the troilite Troilite can accommodate 5 mg/g Ni at high temperatures (> 1170 K) but much less Ni at lower temperatures; because this is far higher than the metamorphic temperature inferred for Semarkona (approx. 670 K), the troilite must be primary Primary troilite fitting the three criteria occurs in a smaller fraction of low-FeO [FeO/(FeO + MgO) in olivine and/or low-Ca pyroxene not greater than 0.0751 than high-FeO porphyritic chondrules in Semarkona (9% vs 33%) Coarse-grained low-FeO porphyritic chondrules appear to contain somewhat more troilite on average than those of medium grain size We found a few troilite-free, metallic-Fe-Ni-bearing, low-FeO chondrules that contain Na2O-bearing augite and Na2O- and K2O-rich mesostasis; these chondrules were probably formed after ambient nebular temperatures cooled below 910 K (the 50% condensation temperature of Na) and before they reached 650 K Literature reports of rare fayalitic microchondrules in the rims around a few normal-size chondrules suggest that chondrule formation persisted until nebular temperatures cooled below 500 K Secondary troilite occurs in a few percent of Semarkona chondrules as thin veins mobilized by shock; troilite or pyrrhotite in the outer portions of some chondrules occur within opaque assemblages containing magnetite, carbide, Ni-rich sulfide, awaruite, and Co-rich kamacite produced by parent-body hydrothermal alteration.

Rubin, Alan E.↗
NASA NTRS2001

Opaque Minerals in the Matrix of the Bishunpur (LL3.1) Chondrite: Constraints on the Chondrule Formation Environment

The chemistry and mineralogy of a group of opaque mineral assemblages in the matrix of the Bishunpur LL3.1 ordinary chondrite provide insight into the nebular environment in which they formed. The assemblages consist of a kamacite (Fe,Ni) core that is rimmed by troilite (FeS) and fayalite (Fe2Si04). Accessory phases in the rims include silica (Si02), chromite (FeCr204), whitlockite (Ca3(P04)2), maricite (FeNaP04), magnetite (Fe304), and tetrataenite (FeNi). We suggest that the metal melted in and equilibrated with an igneous chondrule under high- temperature, reducing conditions. In this environment the molten alloys incorporated varied amounts of Si, Ni, P, Cr, and Co, depending on the oxygen fugacity and temperature of the melt. Some of the metal was subsequently expelled from the chondrule interiors into the surrounding nebular gas. As the temperature dropped, the alloy solidified and volatile elements corroded the metal. The main reaction products were troilite and fayalite. Thermodynamic equilibrium calculations are used to constrain the conditions under which these two phases can form simultaneously in the solar nebula. Kinetic factors are used to place a lower limit on the formation temperature. We determine that the metal corroded between 1173 and 1261 K at a total pressure in the range of 1025.0 to 1024.1 bars and a dust/gas ratio of 302 to 355 x relative to solar composition. These conditions are consistent with our model that the metal corroded in a dust- rich region of the solar nebula that was cooling after a chondrule formation event.

Lauretta, D. S.↗
NASA NTRS2006

History of Metal Veins in Acapulcoite-Lodranite Clan Meteorite GRA 95209

Graves Nunataks (GRA) 95209 has been hailed as the missing link of core formation processes in the acapulcoitelodranite parent asteroid because of the presence of a complex cm-scale metal vein network. Because the apparent liquid temperature of the metal vein (approximately 1500 C) is higher than inferred for the metamorphic grade of the meteorite, questions regarding the vein s original composition, temperature, and mechanism of emplacement have arisen. We have determined trace siderophile element compositions of metals in veins and surrounding matrix in an effort to clarify matters. We analyzed metals in GRA 95209 in a portion of thick metal vein and adjacent metal-rich (30-40 modal%), sulfide poor (less than 1%) matrix by EPMA and LA-ICP-MS for major and trace siderophile elements using methods described by [3]. We also examined metals from a metal-poor (approximately 15 modal%) and relatively sulfide-rich (2-5 modal%) region of the sample. Kamacite is the dominant metal phase in all portions of the sample. In comparison to matrix metal, vein metal contains more schreibersite and less tetrataenite, and is less commonly associated with Fe,Mn,Mg-bearing phosphates and graphite. Vein kamacite contains higher Co, P, and Cr and lower Cu and Ge. These minor variations aside, all metal types in GRA 95209 are fairly homogeneous in terms of their levels of enrichment of compatible siderophile elements (e.g. Pt, Ir, Os) relative to incompatible siderophile elements (e.g. As, Pd, Au), consistent with the loss of metal-sulfide partial melt that characterizes much of the clan. Whatever compositional differences between matrix and vein metal that may have originally existed, they have since largely co-equilibrated to similar restitic trace element compositions. We agree with [2] that metal veins, in their present state, do not represent a liquid composition. The original vein liquid was much more S-rich and emplaced at correspondingly lower liquid temperatures. Much of the Fe,Ni component solidified in cm scale conduits while S-rich melts were expelled and continued to migrate by percolation. The higher troilite content in metal poor regions of the sample results mostly from trapping of a small portion of these melts. The troilite is not remnant primary sulfide. Strong depletions of W, Mo, and especially Ga (greater than 50%, greater than 60%, and greater than 90% depletion, respectively) in metals of the metalpoor GRA 95209 lithology are localized at scales of 10-100 micrometers in the vicinity of graphite spherules. These depletions must have occurred below the temperatures at which cm-scale equilibration occurred, and future work will seek to determine their cause.

Herrin, J. S.↗