Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermal circulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

EGS Collab Experiment 3: 4100 Tensile Stimulation and Thermal Circulation Testing

These data and test descriptions are from a set of primarily tensile hydraulic-fracture stimulations in wells E2-TC and E2-TU and a subsequent chilled water circulation test conducted by injecting in well E2-TU on the 4100 level of the Sandford Underground Research Facility (SURF). Stimulations were carried out between April and May of 2022. The thermal circulation test ran semi-continuously from May 19 through August 26, 2022, though chilled water injection began on June 3. More information about the test, rationale, and processing of data is available on the EGS Collab project page, which is linked below.

15 GEOTHERMAL ENERGY↗
NASA NTRS1994

Global circulation, thermal structure, and carbon monoxide distribution in Venus' mesosphere in 1991

Millimeter-wave observations of CO lines have provided a detailed picture of Venus' mesosphere dynamics in 1991 from simultaneous measurements of absolute wind velocities in two layers and of temperature and CO horizontal and vertical profiles at 75-115 km. Venus' circulation at 90-110 km was characterized in 1991 by the superposition of a zonal retrograde flow and a subsolar-to-antisolar flow of approximately equal velocities, increasing from about 40 +/- 15 m/sec at 95 km to 90 +/- 15 m/sec at 105 km altitude. The magnitude of the increase of the SS-AS flow is consistent with Venus thermosphere general circulation models (VTGCM). At 105 km, the data further indicate a cos(latitude) dependence of the zonal flow and marginally suggest the presence of a poleward meridional component of 35 +/- 30 m/sec. No obvious day-to-day variations of the circulation are evident in the data at the 20 m/sec level. Thermal profiles in the low-latitude region appear to be consistent with the Pioneer Venus nightside profile, except above 110 km, where they are somewhat colder. High-latitude warming is still found, but mid-latitudes appear to be colder than the equator. The atmosphere appears to be in cyclostrophic balance up to about 105 km. The horizontal distribution of CO on Venus' nightside is essentially uniform, both in latitude and in local time. This behavior agrees with VTGCM simulations in which the zonal flow velocity is prescribed to match the observations. Comparison with previous wind measurements indicates that the zonal flow experiences dramatic long-term variations. This variability, along with short-term fluctuations of the mesospheric zonal flow (evidenced by the variability in the O2 nightglow emissions), apparently controls the CO and O2 nightglow distributions. Gravity wave activity is a plausible mechanism that can drive these variations.

Lellouch, Emmanuel↗
NASA NTRS1991

Effects of depth-dependent thermal expansivity on mantle circulations and lateral thermal anomalies

The influences of depth-dependent thermal expansivity on the structure of Newtonian thermal convection and lateral thermal anomalies are studied. In an aspect-ratio ten box the effects of the depth-dependent expansivity are to produce large aspect-ratio cells with a few relatively stationary upwellings. The lateral thermal anomalies in the lower mantle are greatly diminished by depth-dependent expansivity. This together with a decrease in the temperature derivative of seismic velocities in the lower mantle would support the low level of lateral heterogeneities found in recent tomographic studies.

Hansen, Ulrich↗
NASA NTRS1981

The heat capacity mapping mission

The first in a series of low cost Atmospheric Explorer Satellites, the Heat Capacity Mapping Mission (HCMM) was designed to evaluate the utility of thermal inertial and other thermal and reflectance data for: (1) discriminating bedrock and unconsolidated regolith types; (2) mapping soil moisture; (3) measuring plant canopy temperatures; (4) examining thermal circulation in large bodies of water; and (5) monitoring urban heat islands. Final reports from the HCMM investigator's program are beginning to define the utility of day/the night thermal data. Under favorable circumstances, some major rock types can be identified, soil moisture in extensive agricultural and alluvial terrains can be detected and at least semiqualitatively assessed; and circulation of currents in large bodies of water can be followed by noting thermal patterns.

Short, N. M.↗
NASA NTRS1993

Dust-dynamic feedbacks in the Martian atmosphere: Surface dust lifting

Numerical models have been developed to study surface dust lifting in the Martian atmosphere. The present model is comprised of interactively coupled 3-D dynamical and aerosol transport/microphysical models. The nature of possible feedbacks between surface dust lifting and the amplification/damping of near-surface wind and thermal fields and their implications for additional lifting is investigated. These studies have examined large scale Martian topography for its impact upon the ability of the atmospheric circulation to lift dust from the surface, and the particular component(s) responsible for the lifting (e.g. overturning circulation, thermal tides, baroclinic waves). Analogous experiments in which the lifted dust is radiatively inactive (passive tracer) have been conducted to act as a control against which feedbacks are defined.

Murphy, James R.↗
NASA NTRS1993

Dust transport in the Martian atmosphere

Dust in suspension within the martian atmosphere is an important driver of the atmospheric thermal and, ultimately, dynamical states. By virtue of its presence in the atmosphere, this suspended dust is susceptible to transport by the winds and thus the location from which dust is lifted from the surface is not necessarily the location at which it will return to the surface. Such surface dust lifting and subsequent transport, when accumulated over daily, seasonal and annual time intervals define the martian dust cycle. The atmospheric transport element (and equally surface lifting and redeposition) of this cycle is strongly dependent upon season and the quantity of dust in suspension. The seasonal dependence arises due to the dominance of particular components of the atmospheric circulation at particular locations (latitudes) at various times through the year. The dependence on dust abundance is due to the amount of dust available for transport, but it is also due to the influence that the dust has on the intensity of the circulation. As dust abundance and therefore its radiative influence increases, some components of the circulation intensity (Hadley circulation, thermal tides), while some components may decline in intensity (baroclinic waves, condensation flow). For these reasons, our ability to understand the martian dust cycle is dependent on our ability to define the contributions that various circulation components, under varying seasonal and dust-radiative forcings, play in the transport of dust around the planet.

Murphy, James R.↗
NASA NTRS1993

Three-dimensional numerical simulation of near-surface flows over the Martian north polar cap

Measurements made by Viking Lander VL-2 (48 N) have shown that the near-surface wind and temperature regime on Mars displays striking similarities to terrestrial counterparts. The diurnal radiative cycle is responsible for establishment of a well-defined thermal circulation in which downslope (Katabatic) flows prevail during the nighttime hours and weak upslope (anabatic) conditions prevail during the daytime. Previous work has indicated that the slope flows are much like those found on Earth, particularly the Katabatic winds, which show striking similarities to drainage flows observed over Antarctica. The low-level wind regime appears to be an important factor in the scouring of the martian landscape. The north polar cap shows evidence of eolian features such as dunes, frost streaks, and grooves from Viking imagery. The direction of the prevailing wind can in cases be inferred from the eolian features. We examine the thermally induced flows that result from the radiative heating and cooling of the martian north polar region using a comprehensive three-dimensional atmospheric mesoscale numerical model. The same model has been used previously for simulation of Antarctic Katabatic winds. The model equations are written in terrain-following coordinates to allow for irregular terrain; prognostic equations include the flux forms of the horizontal momentum equations, temperature, continuity. A surface energy budget equation is also incorporated in which the surface temperature is determined. Explicit parameterization of both terrestrial (longwave) and solar (shortwave) radiation is included. Turbulent transfer of heat and momentum in the martian atmosphere is assumed to follow the similarity expressions in the surface boundary layer on Earth. The terrain heights for the martian north polar region have been obtained from the U.S. Geological Survey map and digitized onto a 57x57 grid with a spacing of 75 km. The resulting terrain map is shown in Fig. 1. The vertical grid consists of 15 levels (delta equals 0.998, 0.99, 0.98, 0.97, 0.96, 0.94, 0.92, 0.90, 0.85, 0.775, 0.70, 0.60, 0.50, 0.30, 0.10). The high resolution in the lower atmosphere is necessary to capture details of the boundary layer flows. The lowest level corresponds to a height of approximately 20 m above the ground, the seconds level 100 m.

Parish, Thomas R.↗
DOE OSTI2024

EGS Collab Experiment 2: Microseismic Monitoring

This dataset contains continuous seismic waveform data recorded during stimulation and thermal circulation tests for the Enhanced Geothermal Systems (EGS) Collab Experiment #2, conducted from February to September 2022 at the Sanford Underground Research Facility in Lead, South Dakota. This experiment aimed to study and validate models of geothermal systems by injecting high-pressure fluids into rock formations 1200-1500 meters below the surface, inducing microseismic events. The seismic monitoring system included 16 three-component accelerometers and a 24-channel hydrophone array, installed in boreholes surrounding the test area. Data were recorded at high sampling rates using a continuous waveform recording system to monitor seismic activity in real time. The dataset contains the raw data stored in binary format, with files named based on timestamps, and includes calibration certificates for some sensors to facilitate corrections to real units. Users are strongly advised to consult the accompanying detailed report, which outlines the experimental setup, sensor specifications, installation procedures, and data processing methods. The report also describes important nuances, such as the hardware filters on hydrophones, sensor calibration details, and the naming conventions for the recorded data. Proper use of this dataset may require familiarity with seismic data analysis tools, such as the Obspy Python package, and an understanding of the SEED naming conventions used for channel identification.

15 GEOTHERMAL ENERGY↗
NASA NTRS1977

Temperature control system for water-perfused suits

A system used to control skin temperature in human subjects wearing water-perfused garments is described. It supplies 8 l/min at 10 psi with water temperature controlled within plus or minus 0.1 C. Temperature control is facilitated by a low circulating thermal mass and a fast responding heater based on a commercially available quartz heat lamp. The system is open so that hot or cold water can be added from the building mains to produce rates of change of water temperature exceeding 5 C/min. These capabilities allow semiautomatic control of skin temperature within plus or minus 0.1 C of desired wave forms.

Brengelmann, G. L.↗
NASA NTRS2024

Explicitly Resolving Lightning and Electrification Processes from the 10-12 April 2019 Thundersnow Outbreak

The 10-12 April 2019 thundersnow (i.e., lightning within snowfall) outbreak was examined via ground- and space-based lightning observations and was simulated using a numerical weather prediction model with an explicit electrification parameterization. When compared to observations, the simulation propagated the synoptic snowband two to six hours faster while also exaggerating the 3-D reflectivity structure. Throughout the event, the simulation produced 1,733 thundersnow flashes which was less than what was observed by ground- and space-based lightning sensors. In general, simulated thundersnow flashes were spatially offset from the largest reflectivities within the synoptic snowband and tended to occur within elevated convection that traversed isentropically along the top of mid-level frontogenesis. These simulated thundersnow flashes were associated with a tripole charge structure with ice/snow hydrometeors contributing most to the main negative charge region. Both simulated and observed thundersnow flashes initiated in conditionally unstable environments. Lastly, a conceptual model was developed to explain the spatial separation between the largest reflectivities in the snowband and the occurrence of thundersnow. It is hypothesized that the spatial offset of thundersnow initiation from the reflectivity cores within the synoptic snowband arose from a thermal circulation – induced by mid-level frontogenesis – that advects positively charged ice/snow hydrometeors towards the surface and creates a nearly homogeneous vertical charge structure.

lightning↗
NASA NTRS1984

Evaluation of surface sensible heat flux effects on the generation and modification of mesoscale circulations

Mesoscale thermal-induced circulations generated by horizontal gradients in surface characteristics as well as significant perturbations on land and sea breezes and mountain-valley winds due to substantial modifications in the thermal forcing are introduced. It is suggested that these types of mesoscale situations are generally ignored in forecasting but that they may have important implications in very short range predictions.

Segal, M.↗
NASA NTRS1981

Evaluation of HCMM satellite data for estuarine tidal circulation patterns and thermal inertia soil moisture measurements

Digital thermal maps of the Cooper River (SC) and the Potomac River estuaries were prepared from heat capacity mapping radiometer (HCMR) tapes. Tidal phases were correctly interpreted and verified. Synoptic surface circulation patterns were charted by location thermal fronts and water mass boundaries within the estuaries. Thermal anomalies were detected adjacent of a conventional power plant on the Potomac. Under optimum conditions, estuaries as small as the Cooper River can be monitored for generalized thermal/tidal circulation patterns by the HCMM-type IR sensors. The HCMM thermal inertia approach to estimating soil moisture at the Luverne (MN) test site was found to be unsatisfactory as a NESS operational satellite technique because of cloud cover interference. Thermal-IR data show similar structure of the Baltimore and Washington heat islands when compared to NOAA AVHRR thermal-IR data. Thermal anomalies from the warm water discharge water of a nuclear power plant were mapped in Lake Anna, Virginia.

Wiesnet, D. R.↗
NASA NTRS1977

Liquid-circulating garment controls thermal balance

Experimental data and mathematical model of human thermoregulatory system have been used to investigate use of liquid-circulatory garment (LCG) to control thermal balance. Model proved useful as accurate simulator of such variables as sweat rate, skin temperature, core temperature, and radiative, evaporative, and LCG heat loss.

Kuznetz, L. H.↗
DOE OSTI2024

Time-dependent thermal degradation of lost circulation materials in geothermal systems

Treatment of lost circulation can represent anywhere from 5 to 25 % of the cost in drilling geothermal wells. The cost of the materials used for lost circulation treatment is less important than their effectiveness at reducing fluid losses. In geothermal systems, the high temperatures (>90 °C) are expected to degrade many commonly used lost circulation materials over time. This degradation could compromise different materials ability to mitigate fluid loss, creating more non-productive time as multiple treatments are needed, but may result in recovering desired permeability zones within the reservoir section over time. This research aimed to study how thermal degradation of eight different lost circulation materials affected their properties relevant to sealing loss zones in geothermal wells. Here, mass loss experiments were conducted with each material at temperatures of 90–250 °C for 1–42 days to measure the breakdown of the material at geothermal conditions, collecting gases during several experiments to determine the waste produced during degradation. Compaction experiments were conducted with the degraded materials to show how temperatures reduced the rigidity and increased packing of the materials. Viscosity tests were conducted to show the impact of different materials on drilling fluid rheology. Microscope observations were conducted to characterize the alterations to each material due to thermal degradation. Organic materials tend to degrade more than inorganic materials, with organics like microcellulose, cotton seed hulls and sawdust losing 30–50 % of their mass after 1 day of heating at 200 °C, while inorganics like magma fiber only lose ~5–10 % of its mass after one day of heating at 200 °C. Granular materials are the strongest when compacted despite any mass loss, while fibrous and flaky materials are fairly weak and breakdown easily under stress. The materials do not generally affect fluid rheology unless they have a viscosifying agent as part of the mixture. Microscopic analysis showed that more rigid materials like microcellulose and cedar fiber degrade in brittle manners with splitting and fracturing, while others like cotton seed hulls degrade in more ductile manners forming meshes or clumps of material. The thermal breakdown of lost circulation materials tested suggests that each material should also be classified by its degree of thermal degradability, as at certain temperatures the materials can lose the capability to bridge loss zones around the wellbore.

15 GEOTHERMAL ENERGY↗
NASA NTRS1974

Molding apparatus

Apparatus for compression molding of thermosetting plastics compositions including interfitting hollow male and female components is reported. The components are adapted to be compressed to form a rocket nozzle in a cavity. A thermal jacket is provided exteriorly adjacent to the female component for circulating a thermal transfer fluid to effect curing of a thermosetting plastics material being molded. Each of the male and female components is provided with suitable inlets and outlets for circulating a thermal transfer fluid.

Heier, W. C.↗
NASA NTRS1981

On the dynamics of droughts in northeast Brazil - Observations, theory and numerical experiments with a general circulation model

The establishment of a thermally direct local circulation which has its ascending branch at about 10 deg N and its descending branch over northeast Brazil and the adjoining oceanic region is proposed as a possible mechanism for the occurrence of severe droughts over this Brazilian region. The driving for this anomalous circulation is provided by enhanced moist convection due to the effect of warmer sea surface anomalies over the northern tropical Atlantic and cooling associated with colder sea surface temperature anomalies in the southern tropical Atlantic. A simple primitive equation model is used to calculate the frictionally-controlled and thermally-driven circulation due to a prescribed heating function in a resting atmosphere, and a series of numerical experiments are carried out to test the sensitivity of the Goddard Laboratory's model to prescribed sea surface temperature anomalies over the tropical Atlantic.

Moura, A. D.↗