Search NASA⌕ Search

SEARCH · Search NASA

Results for “three-dimensional coordinates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

4-D guidance system design with application to STOL air traffic control.

A new guidance technique, referred to as 4-D guidance, is being developed to improve the operation of future STOL aircraft transportation systems. 4-D guidance refers to a technique of synthesizing a complex three-dimensional flight path from simple pilot inputs and flying the aircraft along the path according to an ATC specified time schedule. The two major elements of a 4-D guidance system are the trajectory synthesizer and the control law for flying the aircraft along the synthesized trajectory using the aircraft's autopilot and autothrottle. Inputs to the trajectory synthesizer are the three-dimensional coordinates of waypoints, the turning radius, the speed range, the acceleration limits and the arrival time at time control waypoints. First the three-dimensional trajectory is computed using circular arcs and straight lines. Then the airspeed profile, compensated for wind, is calculated to achieve the desired arrival times. The pilot is informed if the arrival times cannot be achieved. The synthesized trajectory is stored as a time sequence of reference states and controls which the aircraft is forced to track using a linear feedback law.

Erzberger, H.↗

The 4-D guidance of STOL aircraft in the terminal area

Advanced STOL aircraft for the improvement of the nation's air transportation system by the elimination of delays and congestions associated with today's air travel are discussed. A new guidance technique, referred to as 4-D guidance, is being developed for STOL aircraft. The 4-D guidance technique synthesizes complex three-dimensional flight paths from a minimum set of input and files the aircraft along the paths according to a prespecified time schedule. The two major elements of a 4-D guidance system are the trajectory synthesizer and the control law. Inputs to the trajectory synthesizer are the three-dimensional coordinates of way points, the turning radii, the speed ranges, the acceleration limits, and the arrival times at time control way points. First, the three-dimensional trajectory is computed by using circular arcs and straight lines. Then the airspeed profile, compensated for wind, is calculated to achieve the desired arrival times. The synthesized trajectory is stored as a time sequence of reference states which the aircraft is forced to track by using a linear feedback law.

Pecsvaradi, T.↗

Four-D guidance of STOL aircraft in the terminal area

The primary objective of advanced STOL aircraft is the improvement of the nation's air transportation system by the elimination of delays and congestions associated with today's air travel. A new guidance technique, referred to as 4-D guidance, is being developed to achieve this objective. The 4-D guidance technique synthesizes complex three-dimensional flight paths from a minimum set of input data and flies the aircraft along the paths according to a prespecified time schedule. The two major elements of a 4-D guidance system are the trajectory synthesizer and the control law. Inputs to the trajectory synthesizer are the three-dimensional coordinates of way points, the turning radii, the speed ranges, the acceleration limits, and the arrival times at time control way points. First, the three-dimensional trajectory is computed by using circular arcs and straight lines. Then the airspeed profile, compensated for wind, is calculated to achieve the desired arrival times. The synthesized trajectory is stored as a time sequence of reference states which the aircraft is forced to track by using a linear feedback law.

Pecsvaradi, T.↗

Interaction of marine geodesy, satellite technology and ocean physics

The possible applications of satellite technology in marine geodesy and geodetic related ocean physics were investigated. Four major problems were identified in the areas of geodesy and ocean physics: (1) geodetic positioning and control establishment; (2) sea surface topography and geoid determination; (3) geodetic applications to ocean physics; and (4) ground truth establishment. It was found that satellite technology can play a major role in their solution. For solution of the first problem, the use of satellite geodetic techniques, such as Doppler and C-band radar ranging, is demonstrated to fix the three-dimensional coordinates of marine geodetic control if multi-satellite passes are used. The second problem is shown to require the use of satellite altimetry, along with accurate knowledge of ocean-dynamics parameters such as sea state, ocean tides, and mean sea level. The use of both conventional and advanced satellite techniques appeared to be necessary to solve the third and fourth problems.

Mourad, A. G.↗

A symmetrical laser Doppler velocity meter and its application to turbulence characterization

A symmetrical method of optical heterodyning of the Doppler shifted scattered laser radiation developed for velocity measurements with a minimal instrumental spectral broadening and a high signal-to-noise ratio. The method employs two laser beams incident on the moving scatterer and does not use any reference beam for heterodyning. The Doppler signal frequency is independent of the scattering angle and the signal possesses no receiving aperture broadening. Optical alignment is simple. Typical values of the instrumental spectral broadening were approximately 0.8 percent of the center frequency of the Doppler signal, and the signal-to-noise ratio was approximately 25 dB, obtained from an air flow system using submicron dioctylphthalate scattering aerosol. Experimental and theoretical studies were made on the characteristics of the Doppler signal and the effect of system parameters in turbulent flow measurement. The optimization process involved in the beam optics and in the use of a spatial filter is described. For localized flow measurement in any direction of the three-dimensional orthogonal coordinates, the system, using uncorrected optical components, had a sensing volume which can be described by a sensitive length of 600 microns and a diameter of 100 microns.

Mazumder, M. K.↗

Basic Differential Equations in General Theory of Elastic Shells

The shell shall be considered as a three-dimensional continuous medium; for the coordinate surface, the middle surface of the shell shall be assumed parallel to the bounding surfaces. Let alpha and beta be the curvilinear orthogonal coordinates of this surface, coinciding with the lines of principal curvatures, and gamma the distance along the normal from the point (alpha,beta) of the coordinate surface to any point (alpha,beta,gamma) of the shell.

Vlasov, V. S.↗

Determination of quadric equation coefficients describing three-dimensional surfaces, their constraint and skewed planes, and view point areas

Mathematical model and a digital computer BLITZ language programming technique computes coefficients of quadric equations describing cylinders, paraboloids, ellipsoids, or planes with any orientation to a reference system, coordinates of a vector, and coefficients of quadric surfaces which limit the surface of three-dimensional space.

Paoletti, C. J.↗

On Possible Similarity Solutions for Three-Dimensional Incompressible Laminar Boundary-Layer Flows Over Developable Surfaces and with Proportional Mainstream Velocity Components

Analysis is presented on the possible similarity solutions of the three-dimensional, laminar, incompressible, boundary-layer equations referred to orthogonal, curvilinear coordinate systems. Requirements of the existence of similarity solutions are obtained for the following: flow over developable surface and flow over non-developable surfaces with proportional mainstream velocity components.

Hansen, Arthur G.↗

Generalization of Boundary-Layer Momentum-Integral Equations to Three-Dimensional Flows Including Those of Rotating System

The Navier-Stokes equations of motion and the equation of continuity are transformed so as to apply to an orthogonal curvilinear coordinate system rotating with a uniform angular velocity about an arbitrary axis in space. A usual simplification of these equations as consistent with the accepted boundary-layer theory and an integration of these equations through the boundary layer result in boundary-layer momentum-integral equations for three-dimensional flows that are applicable to either rotating or nonrotating fluid boundaries. These equations are simplified and an approximate solution in closed integral form is obtained for a generalized boundary-layer momentum-loss thickness and flow deflection at the wall in the turbulent case. A numerical evaluation of this solution carried out for data obtained in a curving nonrotating duct shows a fair quantitative agreement with the measures values. The form in which the equations are presented is readily adaptable to cases of steady, three-dimensional, incompressible boundary-layer flow like that over curved ducts or yawed wings; and it also may be used to describe the boundary-layer flow over various rotating surfaces, thus applying to turbomachinery, propellers, and helicopter blades.

Mager, Arthur↗

Calculation of metric coefficients for streamline coordinates.

A procedure is given for deriving the equations describing the surface streamline metric in a general form and in a form suitable for incorporation into computer codes to calculate an inviscid flow about three-dimensional bodies. Sample results are included to show the application of the metric in conjunction with an axisymmetric analog to predict heat transfer to a typical space shuttle orbiter.

Rakich, J. V.↗

Finite difference solution to the three-dimensional, incompressible thermal energy boundary-layer equation

An implicit numerical method has been adopted for the solution to the three-dimensional, energy boundary-layer equation. The energy equation is written in terms of a dimensionless temperature function, the relative stagnation-enthalpy difference, and transformed by the introduction of a Blasius-type transformation of coordinates as well as dimensionless stream functions. The method is applied to the problem consisting of an infinite cylinder joined with its axis perpendicular to a thin, flat, heated plate. A Prandtl number equal to one is simply considered.

Fillo, J. A.↗

Numerical calculation of transonic flow about swept wings.

Description of a mixed elliptic-hyperbolic relaxation algorithm which calculates solutions to the three-dimensional, nonlinear transonic small disturbance potential equation for flows about thin swept lifting wings with free-stream Mach number less than 1. The algorithm is designed to treat supercritical flows, including cases with embedded shock waves. Nonrectangular planform shapes, including sweep and taper, are treated by a coordinate transformation which maps the wing planform into a rectangle. Computed results at angles of attack of 0 and 2 deg for a AR = 4, constant chord, 23.75 deg sweptback planform model with a Lockheed C141 airfoil section are compared with data obtained experimentally for both subcritical and supercritical flows. Subcritical results are also compared with those obtained by a subsonic 'panel' method.

Ballhaus, W. F.↗