Search NASA⌕ Search

SEARCH · Search NASA

Results for “tidal energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

On-Shore Central Hydraulic Power Generation for Wind and Tidal Energy

Tidal energy, offshore wind energy, and onshore wind energy can be converted to electricity at a central ground location by means of converting their respective energies into high-pressure hydraulic flows that are transmitted to a system of generators by high-pressure pipelines. The high-pressure flows are then efficiently converted to electricity by a central power plant, and the low-pressure outlet flow is returned. The Department of Energy (DOE) is presently supporting a project led by Sunlight Photonics to demonstrate a 15 kW tidal hydraulic power generation system in the laboratory and possibly later submerged in the ocean. All gears and submerged electronics are completely eliminated. A second portion of this DOE project involves sizing and costing a 15 MW tidal energy system for a commercial tidal energy plant. For this task, Atlantis Resources Corporation s 18-m diameter demonstrated tidal blades are rated to operate in a nominal 2.6 m/sec tidal flow to produce approximately one MW per set of tidal blades. Fifteen units would be submerged in a deep tidal area, such as in Maine s Western Passage. All would be connected to a high-pressure (20 MPa, 2900 psi) line that is 35 cm ID. The high-pressure HEPG fluid flow is transported 500-m to on-shore hydraulic generators. HEPG is an environmentally-friendly, biodegradable, watermiscible fluid. Hydraulic adaptations to ORPC s cross-flow turbines are also discussed. For 15 MW of wind energy that is onshore or offshore, a gearless, high efficiency, radial piston pump can replace each set of top-mounted gear-generators. The fluid is then pumped to a central, easily serviceable generator location. Total hydraulic/electrical efficiency is 0.81 at full rated wind or tidal velocities and increases to 0.86 at 1/3 rated velocities.

wind energy↗
NASA NTRS2012

On-Shore Central Hydraulic Power Generation for Wind and Tidal Energy

Tidal energy, offshore wind energy, and onshore wind energy can be converted to electricity at a central ground location by means of converting their respective energies into high-pressure hydraulic flows that are transmitted to a system of generators by high-pressure pipelines. The high-pressure flows are then efficiently converted to electricity by a central power plant, and the low-pressure outlet flow is returned. The Department of Energy (DOE) is presently supporting a project led by Sunlight Photonics to demonstrate a 15 kilowatt tidal hydraulic power generation system in the laboratory and possibly later submerged in the ocean. All gears and submerged electronics are completely eliminated.A second portion of this DOE project involves sizing and costing a 15 megawatt tidal energy system for a commercial tidal energy plant. For this task, Atlantis Resources Corporation's 18-m diameter demonstrated tidal blades are rated to operate in a nominal 2.6 m/sec tidal flow to produce approximately one megawatt per set of tidal blades. Fifteen units would be submerged in a deep tidal area, such as in Maine's Western Passage. All would be connected to a high-pressure (20 megapascals, 2900 pounds per square inch) line that is 35 cm ID. The high-pressure HEPG fluid flow is transported 500-m to on-shore hydraulic generators. HEPG is an environmentally-friendly, biodegradable, water-miscible fluid. Hydraulic adaptations to ORPC's cross-flow turbines are also discussed.For 15 megawatt of wind energy that is onshore or offshore, a gearless, high efficiency, radial piston pump can replace each set of top-mounted gear-generators. The fluid is then pumped to a central, easily serviceable generator location. Total hydraulic/electrical efficiency is 0.81 at full rated wind or tidal velocities and increases to 0.86 at 1/3 rated velocities.

wind energy↗
NASA NTRS2013

Wind, Wave, and Tidal Energy Without Power Conditioning

Most present wind, wave, and tidal energy systems require expensive power conditioning systems that reduce overall efficiency. This new design eliminates power conditioning all, or nearly all, of the time. Wind, wave, and tidal energy systems can transmit their energy to pumps that send high-pressure fluid to a central power production area. The central power production area can consist of a series of hydraulic generators. The hydraulic generators can be variable displacement generators such that the RPM, and thus the voltage, remains constant, eliminating the need for further power conditioning. A series of wind blades is attached to a series of radial piston pumps, which pump fluid to a series of axial piston motors attached to generators. As the wind is reduced, the amount of energy is reduced, and the number of active hydraulic generators can be reduced to maintain a nearly constant RPM. If the axial piston motors have variable displacement, an exact RPM can be maintained for all, or nearly all, wind speeds. Analyses have been performed that show over 20% performance improvements with this technique over conventional wind turbines

Jones, Jack A.↗
NASA NTRS2001

Estimates of M2 Tidal Energy Dissipation from TOPEX/Poseidon Altimeter Data

Most of the tidal energy dissipation in the ocean occurs in shallow seas, as has long been recognized. However, recent work has suggested that a significant fraction of the dissipation, perhaps 1 TW or more, occurs in the deep ocean. This paper builds further evidence for that conclusion. More than 6 years of data from the TOPEX/Poseidon satellite altimeter are used to map the tidal dissipation rate throughout the world ocean. The dissipation rate is estimated as a balance between the rate of working by tidal forces and the energy flux divergence, computed using currents derived by least squares fitting of the altimeter data and the shallow water equations. Such calculations require dynamical assumptions, in particular about the nature of dissipation. To assess sensitivity of dissipation estimates to input assumptions, a large suite of tidal inversions based on a wide range of drag parameterizations and employing both real and synthetic altimeter data are compared. These experiments and Monte Carlo error fields from a generalized inverse model are used to establish error uncertainties for the dissipation estimates. Owing to the tight constraints on tidal elevation fields provided by the altimeter, area integrals of the energy balance are remarkably insensitive to required dynamical assumptions. Tidal energy dissipation is estimated for all major shallow seas (excluding individual polar seas) and compared with previous model and data-based estimates. Dissipation in the open ocean is significantly tnhanced around major bathymetric features, in a manner consistent with simple theories the generation of baroclinic tides.

Egbert, Gary D.↗
NASA NTRS2000

Significant Dissipation of Tidal Energy in the Deep Ocean Inferred from Satellite Altimeter Data

How and where the ocean tides dissipate their energy are longstanding questions that have consequences ranging from the history of the Moon to the mixing of the oceans. Historically, the principal sink of tidal energy has been thought to be bottom friction in shallow seas. There has long been suggestive however, that tidal dissipation also occurs in the open ocean through the scattering by ocean-bottom topography of surface tides into internal waves, but estimates of the magnitude of this possible sink have varied widely. Here we use satellite altimeter data from Topex/Poseidon to map empirically the tidal energy dissipation. We show that approximately 10(exp 12) watts-that is, 1 TW, representing 25-30% of the total dissipation-occurs in the deep ocean, generally near areas of rough topography. Of the estimated 2 TW of mixing energy required to maintain the large-scale thermohaline circulation of the ocean, one-half could therefore be provided by the tides, with the other half coming from action on the surface of the ocean.

Egbert, G. D.↗
NASA NTRS2000

Tidal Energy Dissipation from Topex/Poseidon

In a recent paper ({\it Nature, 405,} 775, 2000) we concluded that 25 to 30\% of the ocean's tidal energy dissipation, or about 1 terawatt, occurs in the deep ocean, with the remaining 2.6 TW in shallow seas. The physical mechanism for deep-ocean dissipation is apparently scattering of the surface tide into internal modes; Munk and Wunsch have suggested that this mechanism may provide half the power needed for mixing the deep-ocean. This paper builds further evidence for $1\pm 0.2$ TW of deep-ocean dissipation. The evidence is extracted from tidal elevations deduced from seven years of Topex/Poseidon satellite altimeter data. The dissipation rate Is formed as a balance between the rate of working by tidal forces and the energy flux divergence. While dynamical assumptions are required to compute fluxes, area integrals of the energy balance are, owing to the tight satellite constraints, remarkably insensitive to these assumptions. A large suite of tidal solutions based on a wide range of dynamical assumptions, on perturbations to bathymetric models, and on simulated elevation data are used to assess this sensitivity. These and Monte Carlo error fields from a generalized inverse model are used to establish error uncertainties.

Ray, Richard D.↗
NASA NTRS1999

Tidal Energy Available for Deep Ocean Mixing: Bounds from Altimetry Data

Maintenance of the large-scale thermohaline circulation has long presented an interesting problem. Observed mixing rates in the pelagic ocean are an order of magnitude too small to balance the rate at which dense bottom water is created at high latitudes. Recent observational and theoretical work suggests that much of this mixing may occur in hot spots near areas of rough topography (e.g., mid-ocean ridges and island arcs). Barotropic tidal currents provide a very plausible source of energy to maintain these mixing processes. Topex/Poseidon satellite altimetry data have made precise mapping of open ocean tidal elevations possible for the first time. We can thus obtain empirical, spatially localized, estimates of barotropic tidal dissipation. These provide an upper bound on the amount of tidal energy that is dissipated in the deep ocean, and hence is available for deep mixing. We will present and compare maps of open ocean tidal energy flux divergence, and estimates of tidal energy flux into shallow seas, derived from T/P altimetry data using both formal data assimilation methods and empirical approaches. With the data assimilation methods we can place formal error bars on the fluxes. Our results show that 20-25% of tidal energy dissipation occurs outside of the shallow seas, the traditional sink for tidal energy. This suggests that up to 1 TW of energy may be available from the tides (lunar and solar) for mixing the deep ocean. The dissipation indeed appears to be concentrated over areas of rough topography.

Ray, Richard D.↗
NASA NTRS1999

Tidal Energy Available for Deep Ocean Mixing: Bounds From Altimetry Data

Maintenance of the large-scale thermohaline circulation has long presented a problem to oceanographers. Observed mixing rates in the pelagic ocean are an order of magnitude too small to balance the rate at which dense bottom water is created at high latitudes. Recent observational and theoretical work suggests that much of this mixing may occur in hot spots near areas of rough topography (e.g., mid-ocean ridges and island arcs). Barotropic tidal currents provide a very plausible source of energy to maintain these mixing processes. Topex/Poseidon satellite altimetry data have made precise mapping of open ocean tidal elevations possible for the first time. We can thus obtain empirical, spatially localized, estimates of barotropic tidal dissipation. These provide an upper bound on the amount of tidal energy that is dissipated in the deep ocean, and hence is available for deep mixing. We will present and compare maps of open ocean tidal energy flux divergence, and estimates of tidal energy flux into shallow seas, derived from T/P altimetry data using both formal data assimilation methods and empirical approaches. With the data assimilation methods we can place formal error bars on the fluxes. Our results show that 20-25% of tidal energy dissipation occurs outside of the shallow seas, the traditional sink for tidal energy. This suggests that up to 1 TW of energy may be available from the tides (lunar and solar) for mixing the deep ocean. The dissipation indeed appears to be concentrated over areas of rough topography.

Egbert, Gary D.↗
NASA NTRS1999

Tidal Energy Available for Deep Ocean Mixing: Bounds from Altimetry Data

Maintenance of the large-scale thermohaline circulation has long presented a problem to oceanographers. Observed mixing rates in the pelagic ocean are an order of magnitude too small to balance the rate at which dense bottom water is created at high latitudes. Recent observational and theoretical work suggests that much of this mixing may occur in hot spots near areas of rough topography (e.g., mid-ocean ridges and island arcs). Barotropic tidal currents provide a very plausible source of energy to maintain these mixing processes. Topex/Poseidon (T/P) satellite altimetry data have made precise mapping of open ocean tidal elevations possible for the first time. We can thus obtain empirical, spatially localized, estimates of barotropic tidal dissipation. These provide an upper bound on the amount of tidal energy that is dissipated in the deep ocean, and hence is available for deep mixing. We will present and compare maps of open ocean tidal energy flux divergence, and estimates of tidal energy flux into shallow seas, derived from T/P altimetry data using both formal data assimilation methods and empirical approaches. With the data assimilation methods we can place formal error bars on the fluxes. Our results show that 20-25% of tidal energy dissipation occurs outside of the shallow seas, the traditional sink for tidal energy. This suggests that up to 1 TW of energy may be available from the tides (lunar and solar) for mixing the deep ocean. The dissipation indeed appears to be concentrated over areas of rough topography.

Egbert, Gary D.↗
NASA NTRS1989

New estimates of oceanic tidal energy dissipation from satellite altimetry

As a novel approach to computing the flux of tidal power into shelf areas, tidal maps of an oceanic area near the Patagonian Shelf are derived from 11 months of altimetry records from the GEOSAT satellite. Power fluxes are computed from the maps through Laplace's tidal equations. Flux vectors for M2 clearly show a convergence on to the southern portion of the shelf sea and their total is nearly twice the loss computed by Miller for that area. A decrease of 'quality factor' with frequency from M2 to S2 is in keeping with Webb's hypothesis of shelf resonances at frequencies a little higher than the tidal band.

Cartwright, David E.↗
NASA NTRS2012

Twenty Years of Progress on Global Ocean Tides: The Impact of Satellite Altimetry

At the dawn of the era of high-precision altimetry, before the launch of TOPEX/Poseidon, ocean tides were properly viewed as a source of noise--tidal variations in ocean height would represent a very substantial fraction of what the altimeter measures, and would have to be accurately predicted and subtracted if altimetry were to achieve its potential for ocean and climate studies. But to the extent that the altimetry could be severely contaminated by tides, it also represented an unprecedented global-scale tidal data set. These new data, together with research stimulated by the need for accurate tidal corrections, led to a renaissance in tidal studies in the oceanographic community. In this paper we review contributions of altimetry to tidal science over the past 20 years, emphasizing recent progress. Mapping of tides has now been extended from the early focus on major constituents in the open ocean to include minor constituents, (e.g., long-period tides; non-linear tides in shelf waters, and in the open ocean), and into shallow and coastal waters. Global and spatially local estimates of tidal energy balance have been refined, and the role of internal tide conversion in dissipating barotropic tidal energy is now well established through modeling, altimetry, and in situ observations. However, energy budgets for internal tides, and the role of tidal dissipation in vertical ocean mixing remain controversial topics. Altimetry may contribute to resolving some of these important questions through improved mapping of low-mode internal tides. This area has advanced significantly in recent years, with several global maps now available, and progress on constraining temporally incoherent components. For the future, new applications of altimetry (e.g., in the coastal ocean, where barotropic tidal models remain inadequate), and new mission concepts (studies of the submesoscale with SWOT, which will require correction for internal tides) may bring us full circle, again pushing further development of tidal models as corrections.

Egbert, Gary↗
NASA NTRS1999

Mantle Q at Period 12.4 Hours: New Estimates from Satellite Tracking and Altimetry

The most convincing estimates of mantle Q at periods of many hours have historically come from extrapolating seismic and free-oscillation estimates via some assumed frequency dependence, sometimes contrained by estimates from the Chandler Wobble. At the semidiurnal tidal period, direct estimates of Q have been difficult to obtain because of the dominating signals of the ocean tides, which account for more than 95!k of the tidal energy dissipation. But knowledge of the ocean tides has been rapidly improving, primarily owing to satellite altimetry, and in 1996 we reported (NATURE, 381, 595-7) an estimate of solid-earth tidal energy dissipation and mantle Q based on combining satellite altimeter measurements with tracking observations of tidally induced satellite orbit perturbations. Tidal estimates from both reveal a small systematic difference in the quadrature component of the degree-2, order-2 spherical harmonic coefficients, which we attribute to a small lag in the earth's body tide. The formalism accounts for this lag in both the altimeter and tracking solutions and also accounts for a very small contribution from the lunar atmospheric tide. Since this original report, both altimeter and tracking estimates have improved. Recent solutions for the body-tide lag at the M2 period are 0.20 +/- 0.09 degrees, implying an energy dissipation of 100 +/- 50 gigawatts and a solid-earth Q of 300. Further new solutions will be discussed, as will the prospects for significantly reducing error bars and for obtaining estimates from other tides in the diurnal band.

Ray, Richard D.↗
NASA NTRS2002

Hawaii Ocean Mixing Experiment: Program Summary

It is becoming apparent that insufficient mixing occurs in the pelagic ocean to maintain the large scale thermohaline circulation. Observed mixing rates fall a factor of ten short of classical indices such as Munk's "Abyssal Recipe." The growing suspicion is that most of the mixing in the sea occurs near topography. Exciting recent observations by Polzin et al., among others, fuel this speculation. If topographic mixing is indeed important, it must be acknowledged that its geographic distribution, both laterally and vertically, is presently unknown. The vertical distribution of mixing plays a critical role in the Stommel Arons model of the ocean interior circulation. In recent numerical studies, Samelson demonstrates the extreme sensitivity of flow in the abyssal ocean to the spatial distribution of mixing. We propose to study the topographic mixing problem through an integrated program of modeling and observation. We focus on tidally forced mixing as the global energetics of this process have received (and are receiving) considerable study. Also, the well defined frequency of the forcing and the unique geometry of tidal scattering serve to focus the experiment design. The Hawaiian Ridge is selected as a study site. Strong interaction between the barotropic tide and the Ridge is known to take place. The goals of the Hawaiian Ocean Mixing Experiment (HOME) are to quantify the rate of tidal energy loss to mixing at the Ridge and to identify the mechanisms by which energy is lost and mixing generated. We are challenged to develop a sufficiently comprehensive picture that results can be generalized from Hawaii to the global ocean. To achieve these goals, investigators from five institutions have designed HOME, a program of historic data analysis, modeling and field observation. The Analysis and Modeling efforts support the design of the field experiments. As the program progresses, a global model of the barotropic (depth independent) tide, and two models of the baroclinic (depth varying) tide, all validated with near-Ridge data, will be applied, to reveal the mechanisms of tidal energy conversion along the Ridge, and allow spatial and temporal integration of the rate of conversion. Field experiments include a survey to identify "hot spots" of enhanced mixing and barotropic to baroclinic conversion, a Nearfield study identifying the dominant mechanisms responsible for topographic mixing, and a Farfield program which quantifies the barotropic energy flux convergence at the Ridge and the flux divergence associated with low mode baroclinic waves radiation. The difference is a measure of the tidal power available for mixing at the Ridge. Field work is planned from years 2000 through 2002, with analysis and modeling efforts extending through early 2006. If successful, HOME will yield an understanding of the dominant topographic mixing processes applicable throughout the global ocean. It will advance understanding of two central problems in ocean science, the maintenance of the abyssal stratification, and the dissipation of the tides. HOME data will be used to improve the parameterization of dissipation in models which presently assimilate TOPEX-POSEIDON observations. The improved understanding of the dynamics and spatial distribution of mixing processes will benefit future long-term programs such as CLIVAR.

Ray, Richard D.↗
NASA NTRS2009

Offshore Hydrokinetic Energy Conversion for Onshore Power Generation

Design comparisons have been performed for a number of different tidal energy systems, including a fully submerged, horizontal-axis electro-turbine system, similar to Verdant Tidal Turbines in New York's East River, a platform-based Marine Current Turbine, now operating in Northern Ireland's Strangford Narrows, and the Rotech Lunar Energy system, to be installed off the South Korean Coast. A fourth type of tidal energy system studied is a novel JPL/Caltech hydraulic energy transfer system that uses submerged turbine blades which are mechanically attached to adjacent high-pressure pumps, instead of to adjacent electrical turbines. The generated highpressure water streams are combined and transferred to an onshore hydroelectric plant by means of a closed-cycle pipeline. The hydraulic energy transfer system was found to be cost competitive, and it allows all electronics to be placed onshore, thus greatly reducing maintenance costs and corrosion problems. It also eliminates the expenses of conditioning and transferring multiple offshore power lines and of building offshore platforms embedded in the sea floor.

hydraulic↗
NASA NTRS1996

(abstract) TOPEX/Poseidon: Four Years of Synoptic Oceanography

Exceeding all expectations of measurement precision and accuracy, the US/France TOPEX/Poseidon satellite mission is now in its 5th year. Returning more than 98 percent of the altimetric data, the measured global geocentric height of the sea surface has provided unprecedented opportunities to address a host of scientific problems ranging from the dynamics of ocean circulation to the distribution of internal tidal energy. Scientific highlights of this longest-running altimetric satellite mission include improvements in our understanding of the dynamics and thermodynamics of the large-scale ocean variability, such as, the properties of planetary waves; the energetics of basin-wide gyres; the heat budget of the ocean; and the ocean's response to wind forcing. For the first time, oceanographers have quantitative descriptions of a dynamic variable of the physical state of the global oceans available in near-real-time.

oceanography planetary waves wind forcing sea-surf↗
NASA NTRS1973

Variations in density and chemical composition at 120 km from chemical and dynamical processes.

Atmospheric parameters show both systematic and random patterns of behavior at 120 km altitude. Variations in density, temperature, pressure, and especially atomic oxygen concentration are important. The variations are particularly significant because constant boundary conditions at this altitude have commonly been assumed in atmospheric model making. It is surprising how well the assumption of constant boundary conditions has served over the past decade. However, their use has probably introduced erroneous concepts into the field of atmospheric structure, or at least held off the recognition and introduction of important new concepts. The variations at 120 km are caused by changes in energy input into the upper atmosphere, including internal gravity waves and tidal energy from below, and changes in the transport processes within the atmosphere.

Johnson, F. S.↗
NASA NTRS1963

TIDAL DISSIPATION IN THE MOON

Calculation of the dissipation of tidal energy in the moon due to imperfect elasticity, showing that heating by tidal dissipation is now insignificant

LUNAR TIDE↗
NASA NTRS2011

Spatial Distribution of Volcanic Hotspots and Paterae on Io: Implications for Tidal Heating Models and Magmatic Pathways

Io, the innermost of Jupiter's Galilean satellites, is the most volcanically active body in the Solar. System. Io's global mean heat flow is approximately 2 W/square m, which is approximately 20 times larger than on Earth. High surface temperatures concentrate within "hotspots" and, to date, 172 Ionian hotspots have been identified by spacecraft and Earth-based telescopes. The Laplace resonance between Io, Europa, and Ganymede maintains these satellites in noncircular orbits and causes displacement of their tidal bulges as the overhead position of Jupiter changes for each moon. Gravitational interactions between Jupiter and Io dominate the orbital evolution of the Laplacian system and generate enormous heat within to as tidal energy is dissipated. If this energy were transferred out of Io at the same rate as it is generated, then the associated surface heat flux would be 2.24 +/- 0.45 W/square m. This estimate is in good agreement with observed global heat flow, but to better constrain tidal dissipation mechanisms and infer how thermal energy is transferred to Io's surface, it is critical to closely examine the spatial distribution of volcanic features. End-member tidal dissipation models either consider that heating occurs completely in the mantle, or completely in the asthenosphere. Mixed models typically favor one-third mantle and two-thirds asthenosphere heating. Recent models also consider the effects of mantle-asthenosphere boundary permeability and asthenospheric instabilities. Deep-mantle heating models predict maximum surface heat flux near the poles, whereas asthenosphere heating models predict maxima near the equator-particularly in the Sub-Jovian and Anti-Jovian hemispheres, with smaller maxima occurring at orbit tangent longitudes. Previous studies have examined the global distribution of Ionian hotspots and patera (i.e., irregular or complex craters with scalloped edges that are generally interpreted to be volcanic calderas), but in this study, we combine a new geospatial analysis technique with an improved hotspot and paterae database .

Hamilton, C. W.↗