SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This work describes an approach for recovering images from tightly confined spaces using multimode and analytically demonstrates that the concept is sound.
The expansion of plasmas produced by focusing a CO2 laser pulse onto solid planar targets is discussed. The plasmas are studied using an extreme-ultraviolet spectroheliograph. With titanium and iron targets the plasma blow-off observed in transitions within highly ionized species (e.g., Fe XVI) occurs parallel to the target normal. The plasma is tightly confined to narrow cylindrical structures about 0.7 mm in diameter and is observed as far as 1 cm from the target surface. The electron density is about 2.8 by 10 to the 18th power per cu cm at a distance of 0.7 mm from the target surface and decreases to approximately 6.5 by 10 to the 17th power per cu cm at a distance of 2.9 mm from the surface.
A theoretical model for generation of banded electrostatic emissions by low density, superthermal electrons is developed for application to Jupiter's magnetosphere. The model employs a power law form for the energy dependence and a loss cone pitch angle distribution of the superthermals to drive convective instability of Bernstein modes. A direct correspondence between spectral features of the 3/2 band and resonant superthermal electrons is found. The concept of a critical flux of resonant electrons able to provide 10 e-foldings of electric field amplification yields an explicit relation in terms of the background thermal electron pressure. This result is used to construct a theoretical/empirical model of thermal electron density and temperature from 6-20 Jupiter radii in the Jovian magnetosphere which suggests that the electron temperature is less than the ion temperature which is approximately equal to 10 times the electron temperature in this region. Finally, wave ray paths are computed for propagation in the magnetic equator and in the magnetic meridional plane of a dipole magnetic field. These ray paths suggest that intense wave activity is tightly confined to a small latitudinal extent, less than + or - approximately 4 deg, about the magnetic equator.
A study of the ELF plasma wave environment of the cold Io torus in Jupiter's magnetosphere is made. Voyager 1 data are presented which show three distinct types of electrostatic ion waves occurring there: the Buchsbaum ion-ion mode just below the proton cyclotron frequency f(cp), hydrogen Bernstein modes at (n + 1/2) f(cp), and lower hybrid waves near f(LHR). The presence of these waves at their characteristic frequencies is consistent with a predominantly heavy ion plasma composed of singly ionized sulfur and oxygen ions along with a small admixture of protons. The hydrogen Bernstein modes are tightly confined to the magnetic equator, occurring within + or - 4 deg of it, while the Buchsbaum mode is localized to the dense heavy ion plasma of the cold torus near the centrifugal equator. A general theory for excitation of the waves based on the ion pickup process is developed.
Voyager 2 observations of electrostatic electron and ion cyclotron waves detected in Neptune's magnetosphere are presented. Both types of emission appear in a frequency band above the electron and ion (proton) cyclotron frequencies, respectively, and are tightly confined to the magnetic equator occurring within a few degrees of it. The electron cyclotron modes including an intense upper hybrid resonance emission excited by an unstable loss cone distribution of low-density superthermal electrons. The ion cyclotron waves are interpreted as hydrogen Bernstein modes including an intense lower hybrid resonance emission excited by an unstable ring distribution of low-density pickup N(+) ions deriving from the satellite Triton.
The astrophysical implications of recent radio and optical observations of the powerful compact gigahertz peaked-spectrum (GPS) radio sources are discussed. Some tentative conclusions are presented and a scenario based on the existing data is suggested. It is argued that the spectrum is due to synchrotron self-absorption, which is assumed as the basis for the present inferences from the radio spectral shape. The finding that some GPS sources have a very narrow spectral shape is consistent with the hypothesis that there is a narrow range of size scales which dominate the radio luminosity. The highly inverted LF radio spectrum is consistent with the hypothesis that the radio source is tightly confined. The conclusion that the radio polarization of these sources is systematically low is consistent either with a very tangled magnetic field or very large Faraday rotation measures. It is suggested that GPS radio sources are formed when the radio plasma is confined on the scale of the narrow-line region by an unusually dense and clumpy ISM. The existing optical spectroscopic results are also consistent with the existence of a dense and dusty nuclear ISM.
Currently, endoscopic surgery uses single-mode fiber-bundles to obtain in vivo image information inside the orifices of the body. This limits their use to the larger natural orifices and to surgical procedures where there is plenty of room for manipulation. The knee joint, for example, can be easily viewed with a fiber optic viewer, but joints in the finger cannot. However, there are a host of smaller orifices where fiber endoscopy would play an important role if a cost effective fiber probe were developed with small enough dimensions (less than or equal to 250 microns). Examples of beneficiaries of micro-endoscopes are the treatment of the Eustatian tube of the middle ear, the breast ducts, tear ducts, coronary arteries, fallopian tubes, as well as the treatment of salivary duct parotid disease, and the neuro endoscopy of the ventricles and spinal canal. This work describes an approach for recovering images from tightly confined spaces using multimode. The concept draws upon earlier works that concentrated on image recovery after two-way transmission through a multimode fiber as well as work that demonstrated the recovery of images after one-way transmission through a multimode fiber. Both relied on generating a phase conjugated wavefront, which was predistorted with the characteristics of the fiber. The approach described here also relies on generating a phase conjugated wavefront, but utilizes two fibers to capture the image at some intermediate point (accessible by the fibers, but which is otherwise visually inaccessible).
Currently, endoscopic surgery uses single-mode fiber-bundles to obtain in vivo image information inside orifices of the body. This limits their use to the larger natural bodily orifices and to surgical procedures where there is plenty of room for manipulation. The knee joint, for example can be easily viewed with a fiber optic viewer, but joints in the finger cannot. However, there are a host of smaller orifices where fiber endoscopy would play an important role if a cost effective fiber probe were developed with small enough dimensions (< 250 microns). Examples of beneficiaries of micro-endoscopes are the treatment of the Eustatian tube of the middle ear, the breast ducts, tear ducts, coronary arteries, fallopian tubes, as well as the treatment of salivary duct parotid disease, and the neuro endoscopy of the ventricles and spinal canal. To solve this problem, this work describes an approach for recovering images from. tightly confined spaces using multimode fibers and analytically demonstrates that the concept is sound. The proof of concept draws upon earlier works that concentrated on image recovery after two-way transmission through a multimode fiber as well as work that demonstrated the recovery of images after one-way transmission through a multimode fiber. Both relied on generating a phase conjugated wavefront which was predistorted with the characteristics of the fiber. The described approach also relies on generating a phase conjugated wavefront, but utilizes two fibers to capture the image at some intermediate point (accessible by the fibers, but which is otherwise visually unaccessible).
Small Business Innovation Research contracts from Goddard Space Flight Center to Thermacore Inc. have fostered the company work on devices tagged "heat pipes" for space application. To control the extreme temperature ranges in space, heat pipes are important to spacecraft. The problem was to maintain an 8-watt central processing unit (CPU) at less than 90 C in a notebook computer using no power, with very little space available and without using forced convection. Thermacore's answer was in the design of a powder metal wick that transfers CPU heat from a tightly confined spot to an area near available air flow. The heat pipe technology permits a notebook computer to be operated in any position without loss of performance. Miniature heat pipe technology has successfully been applied, such as in Pentium Processor notebook computers. The company expects its heat pipes to accommodate desktop computers as well. Cellular phones, camcorders, and other hand-held electronics are forsible applications for heat pipes.
Early in the space program, NASA recognized the need to replace bulky coils, compressers, and motors for refrigeration purposes by looking at existing thermoelectric technology. This effort resulted in the development of miniaturized thermoelectric components and packaging to accommodate tight confines of spacecraft. Koolatron's portable electronic refrigerators incorporate this NASA technology. Each of the cooler/warmers employs one or two miniaturized thermoelectric modules. Although each module is only the size of a book of matches, it delivers the cooling power of a 10-pound block of ice. In some models, the cooler can be converted to a warmer. There are no moving parts. The Koolatrons can be plugged into auto cigarette lighters, recreational vehicles, boats or motel outlets.
A mercury-ion clock now at the breadboard stage of development (see figure) has a stability comparable to that of a hydrogen-maser clock: In tests, the clock exhibited an Allan deviation of between 2 x 10(exp -13) and 3 x 10(exp -13) at a measurement time of 1 second, averaging to about 10(exp -15) at 1 day. However, the clock occupies a volume of only about 2 liters . about a hundredth of the volume of a hydrogen-maser clock. The ion-handling parts of the apparatus are housed in a sealed vacuum tube, wherein only a getter pump is used to maintain the vacuum. Hence, this apparatus is a prototype of a generation of small, potentially portable high-precision clocks for diverse ground- and space-based navigation and radio science applications. Furthermore, this new ion-clock technology is about 100 times more stable and precise than the rubidium atomic clocks currently in use in the NAV STAR GPS Earth-orbiting satellites. In this clock, mercury ions are shuttled between a quadrupole and a 16-pole linear radio-frequency trap. In the quadrupole trap, the ions are tightly confined and optical state selection from a Hg-202 radio-frequency-discharge ultraviolet lamp is carried out. In the 16-pole trap, the ions are more loosely confined and atomic transitions resonant at frequency of about 40.507 GHz are interrogated by use of a microwave beam at that frequency. The trapping of ions effectively eliminates the frequency pulling caused by wall collisions inherent to gas-cell clocks. The shuttling of the ions between the two traps enables separation of the state-selection process from the clock microwave- resonance process, so that each of these processes can be optimized independently of the other. The basic ion-shuttling, two-trap scheme as described thus far is not new: it has been the basis of designs of prior larger clocks. The novelty of the present development lies in major redesigns of its physics package (the ion traps and the vacuum and optical subsystems) to effect the desired reduction of size to a volume of no more than a couple of liters. The redesign effort has included selection of materials for the vacuum tube, ion trap, and ultraviolet windows that withstand bakeout at a temperature of approx.450 C in preparation for sealing the tube to contain the vacuum. This part of the redesign effort follows the approach taken in the development of such other vacuum-tube electronic components as flight traveling- wave-tube amplifiers having operational and shelf lives as long as 15 years. The redesign effort has also included a thorough study of residual-gas-induced shifts of the ion-clock frequency and a study of alternative gases as candidates for use as a buffer gas within the sealed tube. It has been found that neon is more suitable than is helium, which has been traditionally used for this purpose, in that the pressure-induced frequency pulling by neon is between a third and a half of that of helium. In addition, because neon diffuses through solids much more slowly than does helium, the loss of neon by diffusion over the operational lifetime is expected to be negligible.
An improvement has been made in the design of a compact, highly stable mercury- ion clock to suppress a loss of ions as they are transferred between the quadrupole and higher multipole ion traps. Such clocks are being developed for use aboard spacecraft for navigation and planetary radio science. The modification is also applicable to ion clocks operating on Earth: indeed, the success of the modification has been demonstrated in construction and operation of a terrestrial breadboard prototype of the compact, highly stable mercury-ion clock. Selected aspects of the breadboard prototype at different stages of development were described in previous NASA Tech Briefs articles. The following background information is reviewed from previous articles: In this clock as in some prior ion clocks, mercury ions are shuttled between two ion traps, one a 16- pole linear radio-frequency trap, while the other is a quadrupole radio-frequency trap. In the quadrupole trap, ions are tightly confined and optical state selection from a 202Hg lamp is carried out. In the 16-pole trap, the ions are more loosely confined and atomic transitions are interrogated by use of a microwave beam at approximately 40.507 GHz. The trapping of ions effectively eliminates the frequency pulling that would otherwise be caused by collisions between clock atoms and the wall of a gas cell. The shuttling of the ions between the two traps enables separation of the state-selection process from the clock microwave-resonance process, so that each of these processes can be optimized independently of the other. This is similar to the operation of an atomic beam clock, except that with ions the beam can be halted and reversed as ions are shuttled back and forth between the two traps. When the two traps are driven at the same radio frequency, the strength of confinement can be reduced near the junction between the two traps, depending upon the relative phase of the RF voltage used to operate each of the two traps, and can cause loss of ions during each transit between the traps and thereby cause loss of the 40.507-GHz ion-clock resonance signal. The essence of the modification is to drive the two traps at different frequencies typically between 1.5 and 2 MHz for the quadrupole trap and a frequency a few hundred kHz higher for the 16- pole trap. A frequency difference of a few hundred kHz ensures that the ion motion caused by the trapping electric fields is small relative to the diameter of the traps. Unlike in the case in which both traps are driven at the same frequency, the trapping electric fields near the junction are not zero at all times; instead, the regions of low electric field near the junction open and close at the difference frequency. An additional benefit of making the 16-pole trap operate at higher frequency is that the strength or depth of the multipole trap can be increased independent of the quadrupole ion trap.
This work describes an approach for recovering images from tightly confined spaces using multimode.
The National Aeronautics and Space Administration (NASA) Armstrong Flight Research Center (AFRC) completed a modal survey of the X-57 Maxwell aircraft cruise motor system to help inform cruise motor redesign efforts. X-57 Maxwell was an electric propulsion demonstrator aircraft developed by NASA to inform airworthiness standards for electrified-aircraft. The cruise motor system modal survey was completed in spring of 2023 utilizing the fixed-base correction (FBC) ground vibration test (GVT) technique developed by ATA Engineering, to decouple the motor modes from the aircraft modes. Previously during the full aircraft GVT, a detailed modal assessment of the cruise motors was not performed. Owing to the X-57 project’s phase in the aircraft development cycle when the motor redesign effort occurred, the cruise motor GVT could only be performed with the cruise motor system installed on the aircraft, with most of its installation hardware (wiring, baffling, sensors, etc.) attached. An impact hammer was used to provide excitation input at various locations within the tight confines of the cruise motor installation. To better support motor redesign efforts, the FBC methodology was utilized to fix, separate and de-couple the cruise motor modes from aircraft modal response. During the GVT, this required additional impact tap tests on candidate fixed-boundary points for each degree of freedom (DOF) to be fixed. Additional triaxial accelerometers installed at the candidate points were used to compute frequency response functions (FRFs) in X, Y, and Z directions to enable those DOFs to be numerically fixed. Test data was acquired using Hottinger Brüel & Kjær’s LAN-XI data acquisition hardware and BK Connect software. FBC post-test processing was performed using the Structural Modification Using Frequency Response Functions (SMURF) technique with ATA Engineering’s Interface between MATLAB, Analysis, Test (IMAT) software. Utilizing the FBC technique relieved test engineers from having to instrument the entire aircraft to identify and separate aircraft response from cruise motor modes of interest. The FBC technique also permitted structural analysis engineers to omit secondary components from their finite element model (FEM) of the cruise motor system. This FBC modal survey was successful, and the first time NASA AFRC utilized the FBC method on an aircraft rather than a test fixture, and also using an impact hammer rather than multiple shakers allowing significant project schedule and cost savings
Observations of forbidden line S II 6716-6731 A emissions from the Jovian magnetosphere have been carried out with a PEPSIOS spectrometer at the Hale 5 m telescope. Spectral resolving power was sufficient to resolve the forbidden line S II line widths. From measured 6716-6731 A doublet ratios and spectral line widths a thermal plasma is found characterized by temperatures about 2 x 10 to the 4th K and electron densities about 2000 cu cm. The source of forbidden line S II emissions was centered within a toroidal region of radius 5 Jupiter radii (inside the orbit of Io), with tight latitudinal confinement near the equilibrium equator for ions in the tilted corotating Jovian magnetic field, and significant long-lived longitudinal structure.
The efficient performance of an airplane requires that certain adjustments be made as the density of the air through which the airplane passes changes. The safety of the over-dimensioned aircraft engine depends upon careful manipulation of spark advance and throttle opening and a proper control of a variable pitch propeller, if the maximum performance of the supercharged engine is to be obtained. It is evident that there is a real need for satisfactory devices to make such adjustments automatically. Discussed here is a method of automatic compensation which deserves consideration in the design of such devices. Existing schemes for automatic compensation all depend upon some contrivance which functions primarily because of changes in atmospheric pressure. In these devices a leak in the supposedly tight chamber means utter failure. The elimination of this source of danger is one of the aims of the method of altitude compensation described here. The change suggested is to make the source of operation the difference between atmospheric pressure and some multiple of atmospheric pressure instead of the difference between the atmospheric pressure and that of the gas confined in a tight chamber. The design of a device based on this method of altitude compensation is given.
We have analyzed clonal cell proliferation in the ventricular zone (VZ) of the early developing mouse neocortex with a replication-incompetent retrovirus encoding human placental alkaline phosphatase (AP). The retrovirus was injected into the lateral ventricles on embryonic day 11 (E11), i.e., at the onset of neuronogenesis. Three days postinjection, on E14, a total of 259 AP-labeled clones of various sizes were found in 7 fetal brains. There are approximately 7 cell cycles between E11 and E14 (), and there is a 1-2 cell cycle delay between retroviral injection and the production of a retrovirally labeled "founder" cell; thus, we estimate that the "age" of the clones was about 5-6 cell cycles. Almost one-half of the clones (48.3%) identified were pure proliferating clones containing cells only in the VZ. Another 18.5% contained both proliferating and postproliferative cells, and 33.2% contained only postproliferative cells. It was striking that over 90% of the clonally related proliferating cells occurred in clusters of two or more apparently contiguous cells, and about 73% of the proliferating cells occurred in clusters of three or more cells. Regardless of the number of cells in the clone, these clusters were tightly packed and confined to a single level of the VZ. This clustering of proliferating cells indicates that clonally related cells maintain neighbor-neighbor relationships as they undergo interkinetic nuclear migration and progress through several cell cycles, and, as a result, the ventricular zone is a mosaic of small clusters of clonally related and synchronously cycling cells. In addition, cells in the intermediate zone and the cortical plate were also frequently clustered, indicating that they became postproliferative at a similar time and that the output of the VZ is influenced by its mosaic structure.
A previously unreported phenomenon, a 'frozen-in' anticyclone (FrIAC) after the 2005 Arctic spring vortex breakup, was discovered in Earth Observing System (EOS) Microwave Limb Sounder (MLS) long-lived trace gas data. A tongue of low-latitude (high-N2O, low-H2O) air was drawn into high latitudes and confined in a tight anticyclone, then advected intact in the summer easterlies through late August. A similar feature in O3 disappeared by early April as a result of chemical processes. The FrIAC was initially advected upright at nearly the same speed at all levels from approx.660 to 1300 K (approx.25-45 km); increasing vertical wind shear after early June tilted the FrIAC and weakened it at higher levels. The associated feature in PV disappeared by early June; transport calculations fail to reproduce the remarkable persistence of the FrIAC, suggesting deficiencies in summer high-latitude winds. The historical PV record suggests that this phenomenon may have occurred several times before. The lack of a persistent signature in O3 or PV, along with its small size and rapid motion, make it unlikely that a FrIAC could have been reliably identified without hemispheric daily longlived trace gas profiles such as those from EOS MLS.