Search NASA⌕ Search

SEARCH · Search NASA

Results for “titania”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Hafnia-rich mixed oxide ceramics of the system HfO2-ZrO2-TiO2 for heaters and heat exchangers in electrothermal thrusters: The effects of titania on selected electrical and mechanical properties of Hafnia-rich mixed oxides in the system Hafnia-Zirconia-Titania, volume 1

A study of the effects of titania on selected properties of hafnia-rich mixed oxides in the system hafnia-zirconia-titania (HZT) was made in the region 5 to 20 mol percent titania. The studied properties included electrical conductivity, thermal expansion, and fracture strength and toughness. The effects of titania on the properties were studied for the reduced state as well as the oxidized state of the sintered mixed oxides. X-ray analysis showed that the materials were not always single phase. The oxidized compositions went from being monoclinic solid solutions at low titania additions to having three phases (two monoclinic and a titanate phase) at high additions of titania. The reduced compositions showed an increasing cubic phase presence mixed with the monoclinic phase as titania was added. The electrical conductivity increased with temperature at approximately 0.1 mhos/cm at 1700 C for all compositions. The thermal expansion coefficient decreased with increasing titania as did the monoclinic to tetragonal transformation temperature. The fracture strength of the oxidized bars tended to decrease with the addition of titania owing to the presence of the second phase titania. The fracture strength of the reduced bars exhibited a minimum corresponding to a two-phase region of monoclinic and cubic phases. When the second phases were suppressed, the titania tended to increase the fracture strength slightly in both the oxidized and reduced states. The fracture toughness followed similar trends.

Staszak, Paul Russell↗
NASA NTRS1998

Effects of Ambient High Temperature Exposure on Alumina-Titania High Emittance Surfaces for Solar Dynamic Systems

Solar dynamic (SD) space power systems require durable, high emittance surfaces on a number of critical components, such as heat receiver interior surfaces and parasitic load radiator (PLR) elements. To enhance surface characteristics, an alumina-titania coating has been applied to 500 heat receiver thermal energy containment canisters and the PLR of NASA Lewis Research Center's (LeRC) 2 kW SD ground test demonstrator (GTD). The alumina-titania coating was chosen because it had been found to maintain its high emittance under vacuum (less than or equal to 10(exp -6) torr) at high temperatures (1457 F (827 C)) for an extended period (approximately 2,700 hours). However, preflight verification of SD systems components, such as the PLR require operation at ambient pressure and high temperatures. Therefore, the purpose of this research was to evaluate the durability of the alumina-titania coating at high temperature in air. Fifteen of sixteen alumina-titania coated Incoloy samples were exposed to high temperatures (600 F (316 C) to l500 F (816 C)) for various durations (2 to 32 hours). Samples, were characterized prior to and after heat treatment for reflectance, solar absorptance, room temperature emittance and emittance at 1,200 F (649 C). Samples were also examined to detect physical defects and to determine surface chemistry using optical microscopy, scanning electron microscopy operated with an energy dispersive spectroscopy (EDS) system, and x ray photoelectron spectroscopy (XPS). Visual examination of the heat-treated samples showed a whitening of samples exposed to temperatures of 1,000 F (538 C) and above. Correspondingly, the optical properties of these samples had degraded. A sample exposed to 1,500 F (816 C) for 24 hours had whitened and the thermal emittance at 1,200 F (649 C) had decreased from the non-heat treated value of 0.94 to 0.62. The coating on this sample had become embrittled with spalling off the substrate noticeable at several locations. Based on this research it is recommended that preflight testing of SD components with alumina-titania coatings be restricted to temperatures no greater than 600 F (316 C) in air to avoid optical degradation. Moreover, components with the alumina-titania coating are likely to experience optical property degradation with direct atomic oxygen exposure in space.

deGroh, Kim K.↗
NASA NTRS2005

Titania Deposition on PMR-15

The formation, degree of crystallinity and adherence of dense titania (TiO2) thin film coatings on a high-temperature polyimide resin (PMR-15) can be influenced by the chemical composition of the polymer surface. Furthermore, solution deposition conditions can be adjusted to provide additional control over the morphology and crystallinity of the titania films. Recipes for solution-based titania deposition that used a slowly-hydrolyzing titanium fluoride salt in the presence of boric acid as a fluoride scavenger allowed growth of films up to 750 nm thick in 22 h. By adjusting solution pH and temperature, either amorphous titania or oriented crystalline anatase films could be formed. Surface sulfonate groups enhance the adhesion of solution-deposited oxide thin film coatings. While most sulfonation procedures severely damaged the PMR-15 surface, the use of chlorosulfonic acid followed by hydrolysis of the installed chlorosulfonyl groups provided effective surface sulfonation without significant surface damage. In some cases, the oxide deposition solution caused partial hydrolysis of the polymer surface, which itself was sufficient to allow adhesion of the titania film through chelation of titanium ions by exposed benzoic acid groups on the polymer surface.

Meador, Mary B.↗
NASA NTRS1987

Cratering history of the Uranian satellites - Umbriel, Titania, and Oberon

Crater size-frequency data for Umbriel, Titania, and Oberon are presented, and the implications of those data are discussed in terms of the geologic histories of these bodies and the populations of objects that have cratered them. The surfaces of Oberon and Umbriel are old and are inferred to date to a period early in their histories when the cratering rate was significantly higher than at present. No significant endogenic resurfacing appears to have occurred on either body after that inferred period of intense cratering. Titania exhibits the youngest surface of these three and appears to have undergone almost complete endogenic resurfacing. Among the Uranian satellites the surfaces of Oberon and Umbriel are interpreted to be the oldest, that of Titania intermediate, and those of Ariel and parts of Miranda the youngest. The size-frequency distributions for these satellites have an average slope of about -3, indicative of a steep crater production function. The cumulative size-frequency data for these Uranian satellites may be interpreted to indicate that parts of their surfaces are saturated with craters at small diameters.

Plescia, J. B.↗
DOE OSTI2026

Biopolymer-Templated Titania Film Formation for Nanostructured Coatings Revealed by Machine Learning-Supported Time-Resolved Analysis

This study presents a machine learning approach to derive the film formation of biopolymer-templated titania nanostructures during spray deposition, in combination with in situ grazing-incidence small-angle X-ray scattering (GISAXS). A neural network trained on synthetic GISAXS data directly predicts domain-size distributions from experimental two-dimensional scattering patterns, capturing the full kinetics of nanostructure evolution with high temporal resolution. The predictions reveal hierarchical size distributions and periodic growth features, consistent with layer-by-layer spray deposition and validated by complementary scanning electron microscopy (SEM) imaging. Quantitative comparison with conventional parametric GISAXS fits shows good qualitative agreement, with systematic differences explained by domain-shape assumptions and resolved by applying a geometric scaling factor. Simulated SEM-like surfaces derived from neural network outputs reproduce the porous, foam-like nanoscale morphology observed experimentally, reinforcing the method’s credibility. This integrated approach enables real-time, nondestructive, statistically averaged monitoring of bulk nanostructure development in functional coatings, offering a scalable methodology to accelerate the characterization and process control of sustainably manufactured nanostructured titania films for energy-related applications such as photocatalysis and photovoltaics.

Heger, JulianEliah↗
NASA NTRS1978

Narrow-band spectrophotometry of Ariel, Umbriel, Titania, Oberon, and Triton

The spectral reflectances of Ariel, Umbriel, Titania, Oberon, and Triton were measured in 28 bandpasses between lambda 326 and lambda 976 nm on the night of 28/29 June 1974. These observations were made with the 200-in. Hale telescope and multichannel spectrometer. Bandpasses of 8 nm from lambda 326 to lambda 566 nm and 16 nm from lambda 592 to lambda 976 nm were employed. The spectral reflectances of Ariel, Oberon, and Titania increase from lambda 342 to lambda 534 nm and are relatively flat from lambda 550 to lambda 976 nm. Umbriel's reflectance decreases monotonically with increasing wavelength through the entire range of measured wavelengths. Triton is found to have a constant spectral reflectance.

Johnson, P. E.↗
NASA NTRS1981

Infrared reflectance spectra of Hyperion, Titania, and Triton

Medium-resolution infrared (1-2.5 microns; Delta-lambda/lambda = 0.05) photometry of Triton, Titania, and Hyperion and medium-resolution (1.5-2.4 microns; Delta-lambda/lambda not greater than 0.01) spectroscopy of Triton are presented. Hyperion and Titania have spectra roughly similar to the laboratory spectrum of water frost, while the spectrum of Triton is inconsistent with the spectra of frosts likely to be major surface constituents.

Lebofsky, L. A.↗
NASA NTRS1989

V photometry of Titania, Oberon, and Triton

The phase angle and orbital brightness variations of Titania, Oberon, and Triton are presently obtained through analysis of V filter photometry obtained at Mauna Kea in 1982-1983. While Titania and Oberon exhibit magnitude variations with phase angle comparable to those of low-to-moderate albedo asteroids observed within several deg of opposition, Triton's phase variation is distinctly different from these and has a phase coefficient consistent with either a high-albedo regolith or an optically thick nonparticulate scattering layer (perhaps an atmosphere, or an ocean). A low-albedo regolith cannot on the strength of these data be ruled out, however.

Goguen, J. D.↗
NASA NTRS2000

Evidence for a Trapped Radical (OH) on Ariel, Oberon, and Titania from Hubble Space Telescope Ultraviolet Spectra

The moons Ariel, Titania, and Oberon have orbits lying within the magnetosphere of Uranus, exposing them to particle irradiation from trapped Ions. This Is similar to the situation experienced by the jovian moons Europa, Ganymede, and Callisto, as well as the saturnian satellites Enceladus, Tethys, Dione, and Rhea. Identification of SO2 on Europa, Ganymede and Callisto, and O3 on Ganymede, Rhea, and Dione has supported suggestions that chemical modifications occur on icy bodies due to ion bombardment associated with the particles entrained within the magnetospheric fields of Jupiter and Saturn. Similar to the Jovian and saturnian satellites mentioned above, water ice is a major component on the larger uranian satellites", thus one might anticipate chemical modification to he an important process in the uranian system. Laboratory studies or the interaction of ultraviolet (uv) and charged-particle radiation with water ice show that in addition to molecular species, a variety of radicals are also produced. We report here evidence for an uv absorption feature in the spectra of Ariel, Titania, and Oberon that we identify as due, in part, to OH; providing the first evidence of a radical produced and trapped on an icy moon within our solar system.

Roush, Ted L.↗
NASA NTRS1999

Effects Investigated of Ambient High-Temperature Exposure on Alumina-Titania High-Emittance Surfaces for Solar Dynamic Systems

Solar-dynamic space power systems require durable, high-emittance surfaces on a number of critical components, such as heat receiver interior surfaces and parasitic load radiator (PLR) elements. An alumina-titania coating, which has been evaluated for solar-dynamic heat receiver canister applications, has been chosen for a PLR application (an electrical sink for excess power from the turboalternator/compressor) because of its demonstrated high emittance and high-temperature durability in vacuum. Under high vacuum conditions (+/- 10(exp -6) torr), the alumina-titania coating was found to be durable at temperatures of 1520 F (827 C) for approx. 2700 hours with no degradation in optical properties. This coating has been successfully applied to the 2-kW solar-dynamic ground test demonstrator at the NASA Lewis Research Center, to the 500 thermal-energy-storage containment canisters inside the heat receiver and to the PLR radiator. The solar-dynamic demonstrator has successfully operated for over 800 hours in Lewis large thermal/vacuum space environment facility, demonstrating the feasibility of solar-dynamic power generation for space applications.

deGroh, Kim K.↗
DOE OSTI2026

Ultranano Titania: Selectively Ridding Water of Persistent Organic Pollutants

Persistent organic pollutants, including the EPA's “dirty dozen”, are difficult to remove from water supplies due to their chemical stability. Here, we report a stable oxide photocatalyst, ultranano titania (d < 2 nm) doped with iron, Fe•TiUNP, that efficiently mineralizes multiple persistent pollutants including aromatic compounds plus common troublesome, difficult-to-oxidize intermediates such as formaldehyde and acetone, netting mineralization of persistent pollutants. Efficiency stems from a direct charge-transfer pathway. The key role of iron doping is to lower the reduction potential of the photogenerated electron so that it is insufficient to reduce water, thus eliminating competition from the hydrogen evolution reaction. The reduction potential of the localized electron is similarly insufficient to reduce quinone, enabling breaking aromaticity. Specific results for degrading acetone, phenol, benzoic acid, and 1,4-benzoquinone are reported.

alcohols↗
NASA NTRS1983

Heats of immersion of titania powders in primer solutions

The oxide layer present on titanium alloys can play an important role in determining the strength and durability of adhesive bonds. Here, three titania powders in different crystalline phases, rutile-R1, anatase-A1, and anatase-A2, are characterized by several techniques. These include microelectrophoresis, X-ray diffractometry, surface area pore volume analysis, X-ray photoelectron spectroscopy, and measurements of the heats of immersion. Of the three powders, R1 has the highest heat of immersion in water, while the interaction between water and A1 powder is low. Experimental data also suggest a specific preferential interaction of polyphenylquinoxaline with anatase.

Siriwardane, R.↗
NASA NTRS1987

Titania's opposition effect - Analysis of Voyager observations

Voyager 2 obtained images of Titania over phase angles ranging from 0.8 to 150 deg and at sufficient resolution to investigate the photometric behavior of different surface units. The large, relatively narrow opposition surge detected from earth was confirmed and can be successfully modeled with Hapke's (1986) photometric theory. Opposition effects do not vary greatly between bright areas (craters and ejecta) and dark areas, but the brightness of the brighter areas decreases more slowly with increasing phase angle than that of the dark areas. Thus the fresher craters and their ejecta become less prominent in relation to the background as opposition is approached. This effect is best explained by a modest difference in single-scattering albedo.

Thomas, P. C.↗
NASA NTRS1989

Titanium carbide and titania phases on Antarctic ice particles of probable extraterrrestrial origin

Two unique titania-rich particles, found within ancient Antarctic ice have been discovered and characterized, and are believed to be of extraterrestrial origin. Both particles contain abundant submicron-sized crystals of Magneli phases (Ti(n)O(2n-1). In addition, one particle contains a core of TiC. Whereas the Magneli phases would have been stable in the early solar nebula, and so probably formed there, the TiC is more likely to have condensed in the cool, dusty, carbon-rich outer shell of a red giant star. It is suggested that both particles are interplanetary dust particles whose Magneli phases carry a record of the PO2-T conditions of the early solar nebula. It is further suggested that the TiC grain in particle 705 is remnant interstellar dust.

Zolensky, M. E.↗
NASA NTRS1998

Titania and Oberon: Surface Composition from New Near-Infrared Observations and Reflectance Models

Here we report the combination of new near-ir spectra (1.45-2.48 micrometers), of Titania and Oberon obtained in September 1995 at a resolving power of approx. 800, with older near-ir observations (0.5- 1.44 micrometers), and recent UV (0.22-0.48 micrometers) observations obtained with HST. Previous interpretations suggest these surfaces are chiefly composed of water ice and varying amounts of spectrally neutral material. The new near-ir data provide the opportunity to search for absorption bands that could be attributable to surface materials other than water ice and because the combined spectra include such a broad wavelength region, to undertake improved models of water and neutral components on the surface. The calculated near-ir geometric albedos clearly exhibit three broad spectral features. Two (1.52- & 2.05 micrometer) have previously been used to demonstrate the presence of water ice on these satellites. The third (approx. 1.65 micrometer), suggests the presence of hexagonal water ice at low temperatures, and may provide a mechanism of estimating the surface temperature. There is no spectral evidence for ices of CO2, CO, NH3 or CH4. At UV wavelengths there is a broad absorption near 0.27-0.28 micrometer previously attributed to OH formed by magnetospheric-surface interactions and retained at the low surface temperatures of these satellites. Surface components used in a Hapke scattering models include values for a combination of irradiated water ice in the UV and hexagonal water ice at 100k in the near-ir (IR), amorphous carbon (AC), and tholins (T) (produced from gas and solid). Results of these models suggest the surfaces of Titania/Oberon are composed of IW (-77/52%) with AC the next most abundant component (approx. 19/52%) and finally T (approx. 4/7%).

Roush, Ted L.↗
NASA NTRS2011

The Effect of Photon Source on Heterogeneous Photocatalytic Oxidation of Ethanol by a Silica-Titania Composite

The objective of this study was to distinguish the effect of photon flux (i.e., photons per unit time reaching a surface) from that of photon energy (i.e., wavelength) of a photon source on the silica-titania composite (STC)-catalyzed degradation of ethanol in the gas phase. Experiments were conducted in a bench-scale annular reactor packed with STC pellets and irradiated with either a UV-A fluorescent black light blue lamp ((gamma)max=365 nm) at its maximum light intensity or a UV-C germicidal lamp ((gamma)max=254 nm) at three levels of light intensity. The STC-catalyzed oxidation of ethanol was found to follow zero-order kinetics with respect to CO2 production, regardless of the photon source. Increased photon flux led to increased EtOH removal, mineralization, and oxidation rate accompanied by lower intermediate concentration in the effluent. The oxidation rate was higher in the reactor irradiated by UV-C than by UV-A (38.4 vs. 31.9 nM/s) at the same photon flux, with similar trends for mineralization (53.9 vs. 43.4%) and reaction quantum efficiency (i.e., photonic efficiency, 63.3 vs. 50.1 nmol CO2 (mu)mol/photons). UV-C irradiation also led to decreased intermediate concentration in the effluent . compared to UV-A irradiation. These results demonstrated that STC-catalyzed oxidation is enhanced by both increased photon flux and photon energy.

Coutts, Janelle L.↗
NASA NTRS2011

Silica-Titania Composite (STC)'s Performance in the Photocatalytic Oxidation of Polar VOCs

The objective of this paper is to determine the performance of a Silica-Titania Composite (STC) in the photocatalytic oxidation (PCO) of polar VOCs for potential applications in trace contaminant control within space habitats such as the ISS and CEV Orion. Tests were carried out in a bench scale STC-packed annular reactor under continuous illumination by either a UV-C germicidal lamp(lambda (sub max) = 254 nm) or UV-A fluorescent BLB (lambda(sub max) = 365 nm) for the removal of ethanol (a predominant polar VOC in the ISS cabin). The STC's performance was evaluated in terms of the ethanol mineralization rate, mineralization efficiency, and the extent of its oxidation intermediate (acetaldehyde) formation in response to the type of light source (photon energy and photon flux) and relative humidity (RH) implemented. Results demonstrated that acetaldehyde was the only quantifiable intermediate in the effluent under UV illumination, but was not found in the dark adsorption experiments. The mineralization rate increased with an increase in photon energy (UV-C greater than UV-A), even though both lamps were adjusted to emit the same incident photon flux, and also increased with increasing photon flux. However, photonic efficiency decreased as the photon flux increased. More importantly, a higher photon flux gave rise to a lower effluent acetaldehyde concentration. The effect of RH on PCO was complex and intriguing because it affected both physical adsorption and photocatalytic oxidation. In general, increasing RH caused a decrease in adsorption capacity for ethanol and reduced the mineralization efficiency with a concomitant higher acetaldehyde evolution rate. The effect of RH was less profound than that of photon flux.

Levine, Lanfang H.↗
NASA NTRS2011

Sustainability of the Catalytic Activity of a Silica-Titania Composite (STC) for Long-Term Indoor Air Quality Control

TiO2-assisted photocatalytic oxidation (PCO) is an emerging technology for indoor air quality control and is also being evaluated as an alternative trace contaminant control technology for crew habitats in space exploration. Though there exists a vast range of literature on the development of photocatalysts and associated reactor systems, including catalyst performance and performance-influencing factors, the critical question of whether photocatalysts can sustain their initial catalytic activity over an extended period of operation has not been adequately addressed. For a catalyst to effectively serve as an air quality control product, it must be rugged enough to withstand exposure to a multitude of low concentration volatile organic compounds (VOCs) over long periods of time with minimal loss of activity. The objective of this study was to determine the functional lifetime of a promising photocatalyst - the silica-titania composite (STC) from Sol Gel Solutions, LLC in a real-world scenario. A bench-scale STC-packed annular reactor under continuous irradiation by a UV-A fluorescent black-light blue lamp ((lambda)max = 365 nm) was exposed to laboratory air continuously at an apparent contact time of 0.27 sand challenged with a known concentration of ethanol periodically to assess any changes in catalytic activity. Laboratory air was also episodically spiked with halocarbons (e.g., octafluoropropane), organosulfur compounds (e.g., sulfur hexafluoride), and organosilicons (e.g., siloxanes) to simulate accidental releases or leaks of such VOCs. Total organic carbon (TOC) loading and contaminant profiles of the laboratory air were also monitored. Changes in STC photocatalytic performance were evaluated using the ethanol mineralization rate, mineralization efficiency, and oxidation intermediate (acetaldehyde) formation. Results provide insights to any potential catalyst poisoning by trace halocarbons and organosulfur compounds.

Coutts, Janelle L.↗