Search NASA⌕ Search

SEARCH · Search NASA

Results for “topological catalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Topological perturbation to a standard dehydrogenation catalyst, Pt 3 Sn

Topological materials, which exhibit protected topological surface states (TSS) near the Fermi level, have been proposed to be good catalysts. Topological catalysis may be more prevalent than we suspect, and not limited to exotic new materials. Here we study a known dehydrogenation catalyst, Pt 3 Sn alloy, which happens to be a topological semimetal, and probe the participation of TSSs in catalytic dehydrogenation of methane catalyzed by this material. Through first principle modeling and detailed analysis of the electronic structure for topological and non-topological surfaces of Pt 3 Sn, we find that TSS get significantly altered by the binding of reaction intermediates, particularly H. However, this effect of TSS on the binding of the reagents is merely perturbative, as the majority of the adsorbate binding is achieved by not-surface-focused electronic states, located much deeper below the Fermi level. Therefore, the reaction energetics and selectivity are predominantly determined by electronic states other than TSS. The fact that TSS are available for the reagent binding does not alone guarantee that the catalysis is strongly driven by TSS. However, TSS are not to be ignored, as small changes in the energetics along the reaction profile can translate into substantial differences in the reaction rate. Hence, in our view, Pt 3 Sn – a topological material – is first and foremost a standard catalyst, with added topological features, and not purely a topological catalyst. Our results point at the need to carefully consider all the bonding effects at the topological material interface.

Chemistry↗
DOE OSTI2024

Hydrogenation of Covalent Organic Framework Induces Conjugated π Bonds and Electronic Topological Transition to Enhance Hydrogen Evolution Catalysis

Recently, many topological materials have been discovered as promising electrocatalysts in chemical conversion processes and energy storage. However, it remains unclear how the topological electronic states specifically modulate the catalytic reaction. Here, the two-dimensional metal phthalocyanine-based covalent organic framework (MP c -COF) is studied by ab initio thermodynamic calculations to clearly reveal the promotional effect on the electrochemical hydrogen evolution reaction (HER) induced by topological gapless bands (TGBs). We find that the prehydrogenated (and fluorinated) H 4 CdPc-COF(F) shows the best HER performance, with 0.016 V (near zero) overpotential. By tracking changes to the electronic structure and free energy as the prehydrogenation and HER processes occur, we are able to separately attribute the high HER efficiency in part due to the increase of the electron bath by donating electrons to the conjugated π bonds and also to the existence of TGBs. Specifically, the significant catalytic promotion by TGBs is proven to decrease the free energy by 0.218 eV to near zero. When the TGBs are destroyed, e.g., by replacing N with P and opening a band gap, the HER efficiency is reduced. As a result, this study opens avenues for deterministically harnessing topological band features to improve electrocatalysis.

25 ENERGY STORAGE↗
DOE OSTI2025

Bulk‐Boundary Correspondence of Semimetal Ru 3 Sn 7 and Topological Surface States on Chemically Realistic Terminations

Ru 3 Sn 7 is experimentally demonstrated as an efficient catalyst, with potential utilization of topological surface states for hydrogen evolution reaction. Despite its promising catalytic performance, the topological nature of Ru 3 Sn 7 remains uncertain. Particularly, the bulk-boundary correspondence has not yet been established, hence hindering a rigorous justification of its topologically-protected surface states. In this work, the bulk topology of Ru 3 Sn 7 is detailed using first-principles calculations and the topological quantum chemistry formalism. Ru3Sn7 turns out to be an enforced semimetal possessing symmetry-protected crossings within a set of bands near the Fermi level, which are enforced and prescribed by the violations of symmetry-prescribed compatibility relations. Moreover, the surface states and the associated origin from the same set of entangled bands are identified, thereby establishing the bulk-boundary correspondence. To evaluate the effects of chemical modifications, the response of topological surface states to various surface terminations, stoichiometry, and oxidation is examined. The surface structures are globally optimized, and the phase diagrams for various experimental conditions are built. It is shown that, due to changes in the local chemical environment, the original surface states are significantly altered. Modified surface bands can be observed near the Fermi level on surface terminations that preserve the C 4v symmetry.

36 MATERIALS SCIENCE↗
DOE OSTI2018

SSZ-70 Borosilicate Delamination Without Sonication: Effect of Framework Topology on Olefin Epoxidation Catalysis

Here, we report a scalable delamination procedure for a SSZ-70-framework layered-zeolite precursor, which for the first time does not involve either sonication or long-chain surfactants. Our approach instead relies on the mild heating of layered zeolite precursor B-SSZ-70(P) in an aqueous solution containing Zn(NO 3 ) 2 and tetrabutylammonium fluoride. Powder X-ray diffraction data are consistent with a loss of long-range order along the z-direction, while 29 Si MAS NMR spectroscopy demonstrates preservation of the zeolite framework crystallinity during delamination. The resulting delaminated material, DZ-2, possesses 1.4-fold higher external surface area relative to the nondelaminated three-dimensional zeolite B-SSZ-70, based on N2 physisorption data at 77 K. DZ-2 was functionalized with cationic Ti heteroatoms to synthesize Ti-DZ-2 via exchange with framework B. Ti-DZ-2 contains isolated titanium centers in its crystalline framework, as shown by UV-Vis spectroscopy. The generality of the synthetic delamination approach and catalyst synthesis is demonstrated with the synthesis of delaminated material DZ-3, which is derived from layered zeolite precursor ERB-1(P) with MWW framework topology. Upon catalytic testing for the epoxidation of 1-octene with ethylbenzene hydroperoxide as oxidant, under harsh tail-end conditions that deactivate amorphous Ti-silica-based catalysts, Ti-DZ-2 exhibits the highest per-Ti-site activity, selectivity, and stability for 1-octene epoxidation of all catalysts investigated. This testing includes the prior benchmark delaminated zeolite catalyst in this area, Ti-UCB-4, which possesses similar external surface area to Ti-DZ-2 but requires sonication and long-chain surfactants for its synthesis. The synthesis of DZ-2 is the first example of an economical delamination of layered zeolite precursor SSZ-70(P) and opens up new doors to the development of delaminated zeolites as commercial catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unraveling the Surface Termination and Evolution of Surface States for Electrocatalyst PtSn 4 in Alkaline HER

Semimetal PtSn 4 has been experimentally demonstrated as a promising topological electrocatalyst for the hydrogen evolution reaction (HER) under both acidic and alkaline conditions. While two possible mechanisms have been proposed to explain its activity, the role of its surface states in HER remains unclear. It is indeed in question how the surface states of this alloy evolve as HER proceeds. In this study, we investigate the surface termination that sustains conducting surface states on PtSn 4 , and we track their evolution during HER catalysis. We show that a reconstructed surface with a Sn-poor termination reproduces the scanning tunneling microscopy pattern observed in experiments and sustains a conducting surface. Through phase diagram and geometric structure analysis, we outline the HER profile following the Volmer–Heyrovsky mechanism. As hydrogen atoms adsorb onto the surface, the structure undergoes further reconstruction to an equilibrium phase with a coverage of two hydrides per unit cell. Meanwhile, the surface electronic bands evolve in response to interactions with the adsorbed hydrogen atoms. A hybridization diagram is further proposed for understanding the surface state evolution based on wave function and chemical bonding analyses. While the Pt atoms serve as conventional sites for hydrogen binding, the surface states of PtSn 4 are essential for stabilizing the hydrogen antibonding states via in-phase electronic interactions with the Sn components. This stabilization results in frontier surface bands that are responsible for driving the HER catalysis. Here, our findings provide a detailed description for the direct involvement of surface states on PtSn4 when employed as a catalyst for HER.

catalysts↗
DOE OSTI2020

Studies of surface adsorbate electronic structure and femtochemistry at the fundamental length and time scales. Final report

The electronic structure and ultrafast (10-15 s-femtosecond timescale) electron dynamics were investigated for clean and atom/molecule covered metal surfaces. The studies were performed by scanning tunneling microscopy (STM) to measure the structure of adsorbed atoms and molecules on metal surfaces, and to investigate their electronic properties. The electronic structure of the observed molecular networks was calculated by electronic structure theory in collaboration with Prof. Jin Zhao, who is a long-time collaborator, a Professor at the University of Science and Technology of China, and holds an Adjunct Professorship at the University of Pittsburgh. We also investigated the electronic properties of C60 molecules when they are templated by corrugated black phosphorous surfaces. We found unexpected charge delocalization that is enabled by the templating. This research was done in collaboration with Professor Min Feng at the Wuhan University, and who also holds an Adjunct Professorship at the University of Pittsburgh. Moreover, the electronic structure and electron dynamics in metal surfaces were investigated by time-resolved photoemission electron spectroscopy. The focus of ultrafast spectroscopy has been on the plasmonic response of silver surfaces. One direction has been to develop multidimensional (energy, momentum, and time) photoelectron spectroscopy of the coherent response of solid surfaces. This method was applied to study the collective electron excitations known generally as plasmons, which screen optical fields from penetration into metals. Although this collective response has been known for more than 60 years and is used extensively to deposit optical energy into metals, how this happens is poorly known. We investigated the plasmonic response of silver at the point where the dielectric response passes through zero and bulk plasmon is excited by light. We discovered that the plasmon excitation decays by exciting electrons from the Fermi level of a metal, which is contrary to what is believed in the plasmonic science community. This research has been performed in collaboration with Dr. Marcel Reutzel, who was a postdoctoral fellow working on this research at the University of Pittsburgh, and now has a faculty position at the University of Göttingen in Germany. Prof. Branko Gumhalter from the Institute of Physics in Zagreb contributed on the theory of plasmonic decay processes. Furthermore, we investigated the Floquet engineering of electronic bands in metals leading to multiphoton photoemission and above threshold photoemission. Finally, we demonstrated that it is possible to change the electronic structure of metals by application of optical fields. Our studies indicated that this happens on subfemtosecond time scale and could potentially be used in ultrafast information processing and quantum computation. Related document information

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Surface Terminations of LaAlO 3 Perovskite Nanoparticles as Viewed by Solid-State Nuclear Magnetic Resonance

Nanocrystal surfaces generally undergo reconstructions that differentiate them from the bulk structures, often in nontrivial ways. Understanding these terminations is critical across diverse fields, from heterogeneous catalysis to the formation of topological states and the synthesis of semiconductor nanomaterials. Determining surface structures is currently an interdisciplinary task, most often involving high-resolution electron microscopy and surface electron diffraction. These methods, however, do not provide a global view of the ensemble of structures present in a sample. Here, we show how surface-sensitive solid-state nuclear magnetic resonance (SSNMR) spectroscopy methods can bridge this gap. In this context, we investigated the surface structure of lanthanum aluminate (LaAlO 3 ) perovskite nanoparticles. Four distinct surface terminations have previously been observed for this material, but their relative abundances were unknown. Using an array of double- and triple-resonance SSNMR methods probing the relative proximities of surface 1 H, 27 Al, 17 O, and 139 La nuclei, we conclude the surface to be majority terminated (80%) by AlO x with substantial (20%) LaO x terminated regions.

Materials↗
DOE OSTI2020

Macroscale Control of Reactivity using 3D Printed Materials with Intrinsic Catalytic Properties

The morphology of heterogeneous catalysts can impact their performance. However, standard manufacturing methods like extrusion or pelleting offer little options for tailoring catalyst shape. Herein, stereolithographic 3D printing is used to produce catalysts with controlled topologies to enhance their performance. A series of magnetic stir-bar compartments (SBC) were 3D printed and tested as catalysts for sucrose hydrolysis. The SBC were printed using acrylic acid (AA) and 1,6-hexanediol diacrylate (HDDA) as acid sites and hydrophobic crosslinking domains, respectively. Variations in the number and tilt direction of the SBC blades produced significant changes in their apparent catalytic activities. These changes resulted from differences in the fraction of active surface effectively interacting with the reactants in solution, as revealed by computational fluid dynamics simulations. Moreover, varying HDDA:AA ratios in SBC regulated reactant-surface interactions to control catalytic activity. Overall, 3D printing catalysts enables quick performance optimization by simultaneously controlling macroscopic structure and molecular composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Identification and quantification of distinct active sites in Hf-Beta zeolites for transfer hydrogenation catalysis

Despite the significant progress made in characterizing different framework heteroatom sites that exist in Lewis acidic zeolites with probe molecule adsorption and spectroscopy, methods to reliably quantify site counts remain indefinite and have been primarily limited to Sn and Ti Lewis acid sites. Here, methods to quantify framework Lewis acidic Hf 4+ sites in zeolite Beta (Hf-Beta) with two Lewis base titrants (pyridine, deuterated acetonitrile) were developed using infrared (IR) spectroscopy. Lewis acid site counts for Hf-Beta zeolites were validated by measuring integrated molar extinction coefficients (IMECs; ε, cm μmol –1 ) on Sn-Beta zeolites using identical Lewis base titrants to benchmark site counts with established literature procedures to quantify Lewis acid sites in Beta zeolites from IR spectra. Highlighting the importance of benchmarking active site counts against well-established experimental protocols, IMECs of CD 3 CN bound to open (ε(Sn; 2316 cm –1 ): 1.80 ± 0.25) and closed (ε(Sn; 2308 cm –1 ): 3.76 ± 0.33) Sn sites were ~1.8x larger than those previously reported while total Lewis acid site counts agreed with those measured by pyridine (ε(Sn; 1451 cm –1 ): 1.58 ± 0.16) on six different Sn-Beta zeolites. IMECs measured for IR peaks reflecting pyridine bound to Lewis acidic Hf sites (ε(Hf; 1448 cm –1 ): 1.54 ± 0.21) and CD 3 CN bound to open (ε(Hf; 2313 cm –1 ): 2.40 ± 0.22) and closed (ε(Hf; 2307 cm –1 ): 3.55 ± 0.41) Hf sites, gave similar counts for the total number of Lewis acidic sites across six Hf-Beta zeolites (Si/Hf = 100–413). Consistent with previous reports with Sn-Beta catalysts where open Sn sites are responsible for catalytic turnover, apparent first and zero-order MPVO rate constants (0.01–1 M cyclohexanone in 2-butanol; per total Hf, 373 K) correlated with the total number of open Hf sites, per total Hf, but not with the total number of closed Hf sites or total Lewis acid site counts. Measured initial MPVO rates (0.1 M cyclohexanone in 2-butanol, per open Hf, 373 K) were ~25x higher on hydrophobic Hf-Beta-F than on hydrophilic Hf-Beta-OH zeolites. Overall, the apparent first-order MPVO rate constants (2-butanol solvent, per open Hf, 373 K) were ~6x higher on Hf-Beta-F than on Hf-Beta-OH zeolites. The characterization methods reported here enable normalization of MPVO turnover rates on Sn- and Hf-Beta zeolites by their number of open sites. Finally, this enables performing quantitative rate comparisons across Lewis acid zeolites of varying active site identity, solvation, and pore topology used in liquid-phase catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Towards libraries of different ultrasmall amorphous silica cage topologies

Cage topology controlled at the nanometer length scale is expected to enable original functionalities, e.g., in catalysis and therapeutics. Cages are fundamental structural motifs of clathrates and their topological duals, Frank-Kasper phases, and are constituents of mesoporous silica frameworks. However, with one exception, they have not been synthesized as discrete particles. By varying reactant ratios of surfactant, oil, and silane, we report the discovery of 5(12)6(2) and 5(12)6(8) amorphous silica polyhedra, each coexisting with the previously identified 5(12) cage, using combined cryo-transmission electron microscopy (cryo-TEM) and single-particle reconstruction (SPR). Notably, the 5(12)6(8) polyhedron represents a topology not previously observed in mesoporous silica frameworks. Control over structural features is demonstrated, and insights into cage formation mechanisms are provided. Structural outcomes are summarized in a ternary morphology diagram alongside prior results, bridging serendipitous discovery and intentional design of silica cages displaying a level of control over silica polymerization rivaling nature.

Jang, Dong June [Department of Materials Science a↗
DOE OSTI2018

In Operando Analysis of Diffusion in Porous Metal‐Organic Framework Catalysts

Abstract The potential to exert atomistic control over the structure of site‐isolated catalyst sites, as well as the topology and chemical environment of interstitial pore spaces, has inspired efforts to apply porous metal‐organic frameworks (MOFs) as catalysts for fine chemical synthesis. In analogy to enzyme‐catalyzed reactions, MOF catalysts have been proposed as platforms in which substrate confinement could be used to achieve chemo‐ and stereoselectivities that are orthogonal to solution‐phase catalysts. In order to leverage the tunable pore topology of MOFs to impact catalyst selectivity, catalysis must proceed at interstitial catalyst sites, rather than at solvent‐exposed interfacial sites. This Minireview addresses challenges inherent to interstitial MOF catalysis by 1) describing the diffusional processes available to sorbates in porous materials, 2) discussing critical factors that impact the diffusion rate of substrates in porous materials, and 3) presenting in operando experimental strategies to assess the relative rates of substrate diffusion and catalyst turnover in MOF catalysis. It is anticipated that the continued development of in operando tools to evaluate substrate diffusion in porous catalysts will advance the application of these materials in fine chemical synthesis.

Gao, Wen‐Yang↗
DOE OSTI2018

Combined quantum mechanical and molecular mechanical method for metal–organic frameworks: proton topologies of NU-1000

Metal–organic frameworks (MOFs) are materials with applications in catalysis, gas separations, and storage. Quantum mechanical (QM) calculations can provide valuable guidance to understand and predict their properties. In order to make the calculations faster, rather than modeling these materials as periodic (infinite) systems, it is useful to construct finite models (called cluster models) and use subsystem methods such as fragment methods or combined quantum mechanical and molecular mechanical (QM/MM) methods. Here we employ a QM/MM methodology to study one particular MOF that has been of widespread interest because of its wide pores and good solvent and thermal stability, namely NU-1000, which contains hexanuclear zirconium nodes and 1,3,6,8-tetrakis(p-benzoic acid)pyrene (TBAPy 4- ) linkers. A modified version of the Bristow–Tiana–Walsh transferable force field has been developed to allow QM/MM calculations on NU-1000; we call the new parametrization the NU1T force field. We consider isomeric structures corresponding to various proton topologies of the [Zr 6 (μ 3 -O) 8 O 8 H 16 ] 8+ node of NU-1000, and we compute their relative energies using a QM/MM scheme designed for the present kind of problem. We compared the results to full quantum mechanical (QM) energy calculations and found that the QM/MM models can reproduce the full QM relative energetics (which span a range of 334 kJ mol -1 ) with a mean unsigned deviation (MUD) of only 2 kJ mol-1. Furthermore, we found that the structures optimized by QM/MM are nearly identical to their full QM optimized counterparts.

Wu, Xin-Ping↗
DOE OSTI2021

Inverse design of nanoporous crystalline reticular materials with deep generative models

Reticular frameworks are crystalline porous materials that form via the self-assembly of molecular building blocks in different topologies, with many having desirable properties for gas storage, separation, catalysis, biomedical applications and so on. The notable variety of building blocks makes reticular chemistry both promising and challenging for prospective materials design. Here we propose an automated nanoporous materials discovery platform powered by a supramolecular variational autoencoder for the generative design of reticular materials. We demonstrate the automated design process with a class of metal–organic framework (MOF) structures and the goal of separating carbon dioxide from natural gas or flue gas. Our model shows high fidelity in capturing MOF structural features. Here, we show that the autoencoder has a promising optimization capability when jointly trained with multiple top adsorbent candidates identified for superior gas separation. MOFs discovered here are strongly competitive against some of the best-performing MOFs/zeolites ever reported.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Torsional Flexibility Tuning of Hexa-Carboxylate Ligands to Unlock Distinct Topological Access to Zirconium Metal–Organic Frameworks

Zirconium-based metal–organic frameworks (Zr-MOFs) exhibit remarkable structural diversity and functionality. However, uncovering new topological types within this family remains a considerable challenge today. Herein, we report two new hexa-topic ligands designed through the introduction of torsional flexibility, which enable the construction of two Zr-MOFs featuring rare network topologies. The (4,4′,4″,4‴,4‴′,4‴′′-((2-carboxybenzene-1,3,5-triyl)tris(9H-carbazole-9,3,6-triyl))hexabenzoic acid ligand (BTCH)) was obtained by replacing the rigid triptycene core in the H6PET-1 ligand (4,4′,4″,4‴,4‴′,4‴′′-(9,10-dihydro-9,10-[1,2]benzenoanthracene-2,3,6,7,14,15-hexayl)hexabenzoic acid) with a benzene-tricarbazole unit. Owing to its torsionally flexible core that allows rotational freedom to the arms, this ligand directs the construction of NU-2620 (NU represents Northwestern University), a Zr-MOF with 8-connected Zr6 clusters and the rare nuh topology. Further flexibilization of the carbazole units to benzene rings yielded the even more torsionally flexible 5′,5‴-bis(4-carboxyphenyl)-5″-(4,4″-dicarboxy-[1,1′:3′,1″-terphenyl]-5′-yl)-[1,1′:3′,1″:3″,1‴:3‴,1‴′-quinquephenyl]-4,4‴′-dicarboxylic acid ligand (CCTT), which forms NU-2630 featuring 6-connected clusters and the pcu topology. Both frameworks exhibit good chemical stability, prompting evaluation of their performance in CO2 photoreduction catalysis. Under low-concentration CO2 conditions, NU-2620 displays markedly higher catalytic activity than its benzene-based analogue, NU-2630, thanks to the abundance of photoactive carbazole units within its structure. These results demonstrate that introducing torsional flexibility in high-connected linkers can unlock access to new topologies and accelerates the reticular expansion of Zr-MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Illuminating the Material World: Autonomous Microscopy to Understand Order, Disorder, and Everything In Between

Artificial intelligence (AI) holds immense promise for revolutionizing microscopy, yet its widespread adoption has been hindered by challenges ranging from user inexperience to limited model transferability and difficulties in operationalizing machine learning. This presentation showcases our approach to developing practical autonomy for materials discovery, aiming to accelerate the integration of AI into everyday microscopy workflows. As shown in Fig. 1, I will focus on three key areas: understanding order-disorder transitions, quantifying point defects, and achieving truly device-scale microscopy. First, I will demonstrate the power of multi-modal knowledge graphs for integrating diverse microscopy data. By combining imaging, spectroscopy, and diffraction data, these graphs provide a holistic view of material behavior, capturing the intricate relationships between different modalities [1,2]. I will present a case study on how these models illuminate the structural and chemical changes associated with irradiation in oxide thin films, revealing critical insights for designing materials for extreme environments like spaceflight and nuclear energy. Specifically, I will show how multi-modal analysis clarifies the evolution of order-disorder transitions under irradiation, a key factor influencing material performance in these applications. Next, I will address the challenge of quantifying point defects in 2D materials. We demonstrate the application of computer vision and transfer learning to accurately identify and classify various defect types, such as vacancies and substitutional atoms, and to quantify their concentrations. This information is crucial for understanding and tailoring the properties of 2D materials for applications in electronics, optoelectronics, and catalysis. For example, I will show how our models can characterize the topological distribution of point defects in MXene transition metal carbides, providing valuable insights for optimizing their performance in energy storage and separation science. Finally, I will discuss our progress toward autonomous device-scale microscopy [3,4]. We are fundamentally redesigning electron microscopes around the principles of machine reasoning, enabling automation beyond basic tasks like sample navigation and data acquisition to include sophisticated experimental design. This approach paves the way for truly reproducible and massively scaled analysis campaigns. I will emphasize the importance of autonomous microscopy platforms for high-throughput materials discovery and characterization, facilitating the rapid screening of materials for a broad range of applications and accelerating the development of next-generation technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Heat capacity and thermodynamic functions of crystalline forms of the metal-organic framework zinc 2-methylimidazolate, Zn(MeIm) 2

Zeolitic imidazolate frameworks (ZIFs) are comprised of metal atoms connected with imidazole-like linkers, and these frameworks have potential for applications in molecular sieving, gas sequestration, and catalysis. Furthermore, these materials form true polymorphs with the same chemical composition but different topologies. In this work, we present the results of low temperature heat capacity and inelastic neutron scattering studies of the sodalite (SOD) and diamondoid ( dia ) topologies of the popular zinc 2-methylimidazolate framework, Zn(MeIm) 2 . Molar heat capacities from 1.8 K to 300 K are presented, along with theoretical fits and the values of C p,m °, Δ 0 T S m °, Δ 0 T H m °, and Φ m ° calculated from those fits. The Gibbs energy of the transformation from SOD to dia is -(4.6 ± 2.2) kJ, and this transformation is primarily enthalpically driven. The results of this study are compared with previous measurements on the zinc 2-ethylimidazolate framework, Zn(EtIm) 2 . Inelastic neutron scattering measurements confirm the presence of low energy modes and suggest that the higher heat capacity of SOD at low temperatures is due to the dynamics of the methyl groups on the methylimidazolate linkers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Buckling of Two-Dimensional Covalent Organic Frameworks under Thermal Stress

Two-dimensional covalent organic frameworks (2D COFs) are periodic, permanently porous, and lightweight solids that are polymerized from topologically designed monomers. The predictable design and structural modularity of these materials make them promising candidates for applications including catalysis, environmental remediation, chemical separations, and organic electronics, many of which will require stability to mechanical and thermal stress. Based on their reinforced structures and high degradation temperatures, as determined by thermal gravimetric analysis (TGA), many reports have claimed that COFs have excellent thermal stability. However, their stability to heat and pressure has not been probed using methods that report on structural changes rather than the loss of volatile compounds. Here, we explore two structurally analogous 2D COFs with different polymerization chemistries using in operando X-ray diffraction (XRD), which demonstrates the loss of crystallinity at lower temperatures than the degradation temperatures measured by TGA. Density functional theory calculations suggest that an asymmetric buckling of the COF lattice is responsible for the observed loss of crystallinity. In addition to their thermal stability, XRD of the 2D COFs under gas pressures up to 100 bar showed no loss in crystallinity or structural changes, indicating that these materials are robust to mechanical stress by applied pressure. We expect that these results will encourage further exploration of COF stability as a function of framework design and isolated form, which will guide the design of frameworks that withstand demanding application-relevant conditions.

Evans, Austin↗