Search NASA⌕ Search

SEARCH · Search NASA

Results for “total electron content”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

New Lightning-Derived Vertical Total Electron Content Data Provide Unique Global Ionospheric Measurements

A newly released, novel ionospheric data set of global gridded vertical total electron content (VTEC) is introduced in this paper. This VTEC data set, provided by Los Alamos National Laboratory (LANL), is derived from very high frequency (VHF; defined as 30–300 MHz) broadband radio-frequency (RF) measurements of lightning made by U.S. Department of Defense sensing systems on board Global Positioning System (GPS) satellites. This paper presents the new data set (LANL VTEC), discusses the errors inherent in VHF TEC estimation due to ionospheric dispersion, and compares the LANL VTEC to two community standard VTEC gridded products: Jet Propulsion Laboratory's Global Ionospheric Model (JPL GIM) and the CEDAR community's Open Madrigal VTEC gridded measurements of L-band GNSS (global navigation satellite systems) TEC. We find that the LANL VTEC data have an offset of 3 TECU from CEDAR Madrigal GNSS VTEC and a full-width-half-maximum (FWHM) of 6 TECU. In comparison, the offset between LANL VTEC and the JPL GIM model is –3 TECU, but with a FWHM of 5 TECU. We also compare to Jason-3 VTEC measurements over the ocean, finding an offset of less than 0.5 TECU and an FWHM of <5 TECU. Because this technique uses a completely different methodology to determine TEC, the sources of errors are distinct from the typical ground-based GNSS L-band (GHz) TEC measurements. Also, because it is derived from RF lightning signals, this data set provides measurements in regions that are not well covered by ground-based GPS measurements, such as over oceans and over central Africa.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Derivations of the Total Radiation Belt Electron Content

Abstract We present multiple derivations of the Total Radiation Belt Electron Content (TRBEC), an indicator of the global number of electrons that instantaneously occupy the radiation belts. Derived from electron flux measurements, the TRBEC reduces the spatial information into a scalar quantity that concisely describes global aspects of the system. This index provides a simple, global, and long‐term assessment of the radiation belts that enables systematic analysis. In this work, we examine the TRBEC using the adiabatic invariants of which has been used in previous articles as this coordinate system removes reversible adiabatic effects. We then introduce a new expression to compute the TRBEC using the non‐adiabatic coordinates of , relevant in the contexts of energetic electron precipitation, chorus, and hiss scattering where adiabatic invariant quantities are no longer conserved. From both expressions of the TRBEC we demonstrate that an erroneous factor of that appeared in previous works using the adiabatic derivation led to an overestimate of the reported electron populations. In addition, we quantify electron loss in the outer radiation belt via a case study using the Van Allen Probes data over a 20‐day period from March 2013 specifying particle populations both in terms of the aforementioned adiabatic and non‐adiabatic variables. The total number of electrons in the outer radiation belt reached upwards of electrons at the peak of the storm, a rest mass of roughly 10 g.

Astronomy & Astrophysics↗
DOE OSTI2020

Assessment of Variability of the TEC in the Equatorial Anomaly Region with a Focus over Africa Using Rz and F10.7 as Input Drivers

This paper mainly intends to address the assessment of altitudinal variability of the vertical total electron content (VTEC) extracted from the Global Positioning System (GPS), the new versions of the International Reference Ionosphere Extended to the Plasmasphere (IRI-Plas 2017), and a quick-run ionospheric electron density (NeQuick 2) model in the equatorial anomaly region with a focus over Africa. This is manipulated employing the daily sunspot number (Rz) and 10.7 cm solar radio flux (F10.7) indices as the driver for the models during 2013–2016. The results show that the GPS-derived VTEC values are generally smaller than the modeled VTEC (IRI-Plas 2017 and NeQuick 2 VTEC) values, especially while utilizing the models with the Rz index. The modeled VTEC values are closer to the GPS VTEC values while using the models with the F10.7 index than Rz. The VTEC values obtained while using both models with the F10.7 index tend to increase while traversing from the high to the low solar activity years (especially in the March equinox and December solstice). The top-side ionospheric and plasmaspheric layers contribute the highest and lowest values to the total VTEC. Hence, the signal propagation through the ionosphere is largely affected when the signal crosses the top-side layer. Unlike other layers, due to the limited impact of the EUV on the ionization of neutral particles in the plasmasphere, the VTEC in the plasmaspheric layer (ECpl) shows smooth pattern with similar hourly values. Moreover, the IRI-Plas 2017 model does not effectively respond to the geomagnetic storm time variability of the VTEC with altitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Superthermal Electron Deposition on the Mars Nightside During ICMEs

Superthermal electron precipitation is one of the main sources supporting the Mars nightside ionosphere. It is expected that solar wind electron fluxes are to increase significantly during interplanetary coronal mass ejections (ICMEs) and therefore an enhanced nightside ionospheric density. This study is to quantify the variation of the precipitating and deposited electron fluxes during five extreme ICMEs encountered by Mars Global Surveyor (MGS). We find that energy fluxes correlate better with the upstream dynamic pressure proxy than number fluxes and electron fluxes increase more at high energies, which means that electrons tend to have a lower peak production altitude during storm times. The precipitating and net/deposited fluxes are increased up to an order of magnitude from low to high dynamic pressures. The estimated total electron content (TEC) is a few times of 10 14 m -2 for quiet times and on the order of 1015 m -2 for storm times, with an enhancement up to an order of magnitude locally near strong crustal fields. Crustal magnetic fields have an effect on the deposited fluxes with more prominent magnetic reflection over strong magnetic fields during quiet periods, which is significantly reduced during storm times. Lastly, we estimate a global energy input from downward fluxes of 1.1 × 10 8 and 5.5 × 10 8 W and the globally deposited energy from net fluxes of 2.0 × 10 7 and 1.6 × 10 8 W for quiet and storm time periods, a factor of 5 and 8 enhancement globally, respectively, but up to an order of magnitude locally near strong crustal fields.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

The High Latitude Ionospheric Response to the Major May 2024 Geomagnetic Storm: A Synoptic View

Abstract The high latitude ionospheric evolution of the May 10‐11, 2024, geomagnetic storm is investigated in terms of Total Electron Content and contextualized with Incoherent Scatter Radar and ionosonde observations. Substantial plasma lifting is observed within the initial Storm Enhanced Density plume with ionospheric peak heights increasing by 150–300 km, reaching levels of up to 630 km. Scintillation is observed within the cusp during the initial expansion phase of the storm, spreading across the auroral oval thereafter. Patch transport into the polar cap produces broad regions of scintillation that are rapidly cleared from the region after a strong Interplanetary Magnetic Field reversal at 2230UT. Strong heating and composition changes result in the complete absence of the F2‐layer on the eleventh, suffocating high latitude convection from dense plasma necessary for Tongue of Ionization and patch formation, ultimately resulting in a suppression of polar cap scintillation on the eleventh.

Themens, David R.↗
DOE OSTI2025

Ionospheric Disturbances in GNSS TEC Data: SpaceX Falcon 9 Deorbit Maneuvers Over CONUS in April–May 2024

Traveling ionospheric disturbances (TIDs) driven by a large number of internal and external sources are detectable with dense networks of ground‐based Global Navigation Satellite System (GNSS) receivers' measurements of total electron content (TEC). We present the newly developed System for Rapid Analysis of Ionospheric Dynamics (S‐RAID), providing data and visual GNSS TEC products of TIDs of periods ~2–120 min and horizontal resolution up to tens of kilometers for years 2017–2024. The S‐RAID data reveal myriad natural and anthropogenic TIDs from meteorology and space weather, and from human spaceflight activities. In this report, we focus on new prominent disturbances found during SpaceX second stage deorbit maneuvers in April–May 2024. Signatures include waves emanating from the Falcon's trajectory above California and depletions following its deorbit and passage over Arizona. These findings suggest further opportunities to detect and quantify small‐scale events in the ionosphere as well as to understand the responses of the atmosphere‐ionosphere system to known inputs.

58 GEOSCIENCES↗
DOE OSTI2020

Validation of the IRI-2016 model with Indian NavIC data for future navigation applications

The position accuracy of Navigation with Indian Constellation (NavIC) system is affected by several sources of errors. Among them, the Ionospheric Time Delay (ITD) error is the most predominant one which depends upon the total electron content (TEC) present in the ionosphere. The ITD variations are more intense over low latitude regions due to the equatorial anomaly effects. Hence, modelling of ITD error is necessary. The International Reference Ionosphere (IRI)-2016 model is one of the standard global ionospheric models to estimate the Vertical TEC (VTEC). This paper discusses about the VTEC deviations due to the IRI-2016 model over low latitude Hyderabad station, Indian region using NavIC, Global Positioning System and Global Navigation Satellite System signals at corresponding Ionospheric Pierce Point latitude and longitudes for all months and various Kp indices during the low solar activity year 2017. In this work, cross correlation coefficient, the metric norm (L2N), Symmetric Kullbacke Leibler Distance metrics are used to evaluate the performance of IRI-2016 model TEC with NavIC, GPS and GLONASS data. From the results, it is found that TEC predicted by the IRI-2016 model produced smaller estimation errors with NavIC data over Indian region. The obtained results will be helpful for future updates of IRI model.

42 ENGINEERING↗
DOE OSTI2026

First DIII-D-West hybrid scenario similarity experiments for iter-relevant long-pulse operation

For the first time, similarity experiments between DIII-D and WEST were performed in the ITER "hybrid-like" regime during dedicated campaigns in April and May 2025. The matched parameters include elongation, triangularity, ion ∇B drift direction toward the X-point, qprofile, and core normalized physics quantities in terms of normalized pressure, normalized gyroradius, electron collisionality, ratio of ion to electron temperature, T i /T e . Core transport physics is explored with different aspect ratio (R/a) values (typically 3 at DIII-D and 5 on WEST). DIII-D explored high-beta conditions (electromagnetic effect) with low torque injection (~0 ± 0.5 N•m) using high heating power (up to 6 MW NBI and 2 MW ECRH powers), while scanning the heating mix (ion vs electron), beta, T i /T e , core radiation via controlled tungsten injection using the Laser Blow-Off system. WEST extended operation toward long-duration pulses using its actively cooled tungsten divertor, achieving dominated electron heating regimes with reduced tungsten contamination. Boron impurity injection were scanned on WEST to control edge conditions and core performance. It is found that core confinement improves-manifested by higher electron temperature, total energy content, neutron rate, and ion temperatureunder conditions of low separatrix density, consistent with previous observations [Bourdelle et al., Nucl. Fusion 63 (2023) 056021]. Conditions for Hmode access and for ion heating in electron-dominated regimes in both WEST and DIII-D will be discussed and compared. The ratio of the thermal energy confinement time (τ E ) to the volume-averaged electron-ion collisional heat exchange time (τ e-i ) is a key parameter to enhance ion heating and potentially facilitate H-mode access in electron-heated regimes. These first-of-a-kind coordinated DIII-D and WEST experiments provide a unique multi-machine dataset to validate predictive models and to optimize ITER hybrid-scenario performance under diverse core and edge conditions.

DIII-D↗
DOE OSTI2021

Electron Acceleration during Macroscale Magnetic Reconnection

Here, the first self-consistent simulations of electron acceleration during magnetic reconnection in a macroscale system are presented. Consistent with solar flare observations, the spectra of energetic electrons take the form of power laws that extend more than two decades in energy. The drive mechanism for these nonthermal electrons is Fermi reflection in growing and merging magnetic flux ropes. A strong guide field suppresses the production of nonthermal electrons by weakening the Fermi drive mechanism. For a weak guide field the total energy content of nonthermal electrons dominates that of the hot thermal electrons even though their number density remains small. Our results are benchmarked with the hard x-ray, radio, and extreme ultraviolet observations of the X8.2-class solar flare on September 10, 2017.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Microfracture-pore structure characterization and water-rock interaction in three lithofacies of the Lower Eagle Ford Formation

The microfracture-pore structures and water-rock interactions of eight samples of three typical lithofacies (three limestone, three wackestone, and two mudstone) from the Lower Eagle Ford Formation have been investigated using an integrated methodology. The methods used were X-ray diffraction (XRD), total organic carbon (TOC) content, pyrolysis, thin-section petrography, scanning electron microscopy (SEM), mercury intrusion porosimetry (MIP), spontaneous water imbibition, and water vapor & nitrogen physisorption. Petrophysical properties such as organic richness, maturity, mineral composition, types and patterns of microfractures and pores, porosity, pore-throat size distribution, pore size distribution, pore connectivity, water adsorption and desorption behavior were determined from these methods, and the results compared among the three lithofacies. For example, the three limestone EAS samples and three wackestone DM samples show a low porosity range from 2.02–3.35%, whereas the two mudstone VRU samples exhibit a much large average porosity of 11.7% by MIP results. Nitrogen physisorption results show that pore size distributions have a good similarity in N2 adsorption volume for the samples with similar lithology. Microfractures are morphologically divided into seven types, with their definitions & pictorial examples presented and possible formation mechanisms proposed. In addition, the water vapor physisorption behavior and their controlling factors are discussed. Here, the water adsorption capacity shows a positive relationship (R 2 = 0.90) with clay content and a negative relationship (R 2 = 0.99) with carbonate content. In general, this integrated study of microfracture-pore structure characterization and water-rock interaction provides some insights of water vapor adsorption behavior in different lithofacies and whether microfractures could be an important pathway for fluid flow.

58 GEOSCIENCES↗
DOE OSTI2024

Structural determination of a full-length plant cellulose synthase informed by experimental and in silico methods

Three-dimensional structure determination and prediction of proteins with intrinsically disordered regions, unstructured regions, conformational flexibility, and lacking homologous structures are challenging. We previously predicted and refined an in silico structure of a plant cellulose synthase from cotton (GhCESA1), and more recently, cryo-electron microscopy (cryo-EM) has resolved a majority of the lengths of two CESA structures from poplar (PttCESA8) and cotton (GhCESA7). However, 26–30% of these cryo-EM structures remain unresolved, including the N-terminal domain, half of the class-specific region, the gating loop region, and the C-terminal domain. Here, we describe the generation and evaluation of a full-length hybrid GhCESA1 model based on this cryo-EM PttCESA8 structure, with unresolved regions completed using this in silico refined GhCESA1 model. All-atom molecular dynamics simulations and subsequent energy minimizations were performed for the in silico and hybrid GhCESA1 models in a lipid bilayer-water-ion environment, and structural stability, dynamics, energetics, contacts, and quality were evaluated. The unresolved regions were found to be the most dynamic, in agreement with their poor electron density with cryo-EM. The hybrid model exhibited a higher total secondary structure content, more favorable intra-protein and protein-lipid interaction energies, and improved quality metrics. Moreover, hydrogen bonding was revealed to be a primary mechanism for intra-protein and protein-lipid contacts. These results demonstrate that in silico structure prediction and refinement may be useful to augment experimental structure determination, especially for disordered and unstructured regions. Furthermore, this hybrid model can serve as a steppingstone to derive full-length homology models of other CESAs found in more experimentally tractable organisms.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Post-Wildfire Mobilization of Organic Carbon

Wildfires significantly alter watershed functions, particularly the mobilization of organic carbon (OC). This study investigated OC mobility and the physicochemical characteristics of wildfire-impacted soils and ashes from the northern California and Nevada fires (Dixie, Beckworth, Caldor). Organic carbon in wildfire-derived ashes (9.2–57.3 mg/g) generally exceeded levels in the background soils (4.3–24.4 mg/g), except at the Dixie fire sites. The mobile OC fraction varied from 0.0093 to 0.029 in ashes and 0.010 to 0.065 in soils, though no consistent trend was observed between the ashes and soils. Notably, the ash samples displayed lower OC mobility compared with the soils beneath them. A negative correlation was found between the mobile OC fraction and bulk OC content. Wildfire increased the total amount of mobile OC substantially by 5.2–574% compared to the background soils. Electron paramagnetic resonance (EPR) spectra confirmed the presence of environmentally persistent free radicals (EPFRs), which correlated with observed redox reactivity. Additionally, X-ray absorption near edge structure (XANES) and X-ray fluorescence (XRF) imaging revealed that Fe(II) oxidation in soils beneath the ashes may have enhanced the OC mobility, likely driven by pyrogenic carbon and free radicals. These findings enhance our understanding of post-wildfire OC mobilization and the impact of ash–soil physicochemical properties on watershed health.

organic carbon↗
DOE OSTI2022

Nitrogen-Doped Carbon Flowers with Fe and Ni Dual Metal Centers for Effective Electroreduction of Oxygen

Carbon-based nanocomposites have been attracting extensive attention as high-performance catalysts in alkaline media towards the electrochemical reduction of oxygen. Herein, polyacrylonitrile nanoflowers are synthesized via a free-radical polymerization route and used as a structural scaffold and precursor, whereby controlled pyrolysis leads to the ready preparation of carbon nanocomposites (FeNi-NCF) doped with both metal (Fe and Ni) and nonmetal (N) elements. Transmission electron microscopy studies show that the FeNi-NCF composites retain the flower-like morphology, with the metal species atomically dispersed into the flaky carbon petals. Remarkably, despite a similar structure, elemental composition, and total metal content, the FeNi-NCF sample with a high Fe:Ni ratio exhibits an electrocatalytic performance towards oxygen reduction reaction (ORR) in alkaline media that is similar to that by commercial Pt/C, likely due to the Ni to Fe electron transfer that promotes the adsorption and eventual reduction of oxygen, as evidenced in X-ray photoelectron spectroscopic measurements. Results from this study underline the importance of the electronic properties of metal dopants in the manipulation of the ORR activity of carbon nanocomposites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-throughput characterization, correlation, and mapping of leaf photosynthetic and functional traits in the soybean ( Glycine max ) nested association mapping population

We report photosynthesis is a key target to improve crop production in many species including soybean [Glycine max (L.) Merr.]. A challenge is that phenotyping photosynthetic traits by traditional approaches is slow and destructive. There is proof-of-concept for leaf hyperspectral reflectance as a rapid method to model photosynthetic traits. However, the crucial step of demonstrating that hyperspectral approaches can be used to advance understanding of the genetic architecture of photosynthetic traits is untested. To address this challenge, we used full-range (500–2,400 nm) leaf reflectance spectroscopy to build partial least squares regression models to estimate leaf traits, including the rate-limiting processes of photosynthesis, maximum Rubisco carboxylation rate, and maximum electron transport. In total, 11 models were produced from a diverse population of soybean sampled over multiple field seasons to estimate photosynthetic parameters, chlorophyll content, leaf carbon and leaf nitrogen percentage, and specific leaf area (with R 2 from 0.56 to 0.96 and root mean square error approximately <10% of the range of calibration data). We explore the utility of these models by applying them to the soybean nested association mapping population, which showed variability in photosynthetic and leaf traits. Genetic mapping provided insights into the underlying genetic architecture of photosynthetic traits and potential improvement in soybean. Notably, the maximum Rubisco carboxylation rate mapped to a region of chromosome 19 containing genes encoding multiple small subunits of Rubisco. We also mapped the maximum electron transport rate to a region of chromosome 10 containing a fructose 1,6-bisphosphatase gene, encoding an important enzyme in the regeneration of ribulose 1,5-bisphosphate and the sucrose biosynthetic pathway. The estimated rate-limiting steps of photosynthesis were low or negatively correlated with yield suggesting that these traits are not influenced by the same genetic mechanisms and are not limiting yield in the soybean NAM population. Leaf carbon percentage, leaf nitrogen percentage, and specific leaf area showed strong correlations with yield and may be of interest in breeding programs as a proxy for yield. This work is among the first to use hyperspectral reflectance to model and map the genetic architecture of the rate-limiting steps of photosynthesis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Investigating the Chemical Reactivity of Lithium Silicate Model SEI Layers

Silicon anodes suffer from an unstable solid electrolyte interphase (SEI) layer that contributes to undesirable capacity fade with cycling. A key part to addressing this unstable SEI formation is to examine how certain components of the SEI react with the electrolyte over time. One SEI component that has not been thoroughly studied in the context of the chemical reactivity against the electrolyte is lithiated silicate. Four model silicate thin films with increasing lithium content were deposited by radio frequency (RF) magnetron sputtering to study how the lithiation of the native oxide on a silicon anode affects the chemical stability of the anode surface. SiO2, Li2Si2O5, Li2SiO3, and Li3SiOx films were exposed to 1.2 M LiPF6 in the 3:7 wt% ethylene carbonate/ethyl methyl carbonate (EC/EMC) electrolyte for periods of time that are representative of the amount of time it takes to undergo cell formations. Soaked samples were rinsed, dried, and characterized by a combination of attenuated total reflectance-infrared spectroscopy (ATR-IR), focused ion beam-secondary electron microscopy (FIB-SEM), and X-ray photoelectron spectroscopy (XPS) depth profiling. It was found that the rate of the decrease in film thickness of the silicates exposed to the electrolyte over time increases as a function of the lithium content in the thin film. This reaction involves HF etching and LiPF6 salt degradation leading to silicate loss and fluorination throughout the bulk. Understanding this chemical instability is critical to determining the overall mechanism of SEI degradation over time.

ADVANCED PROPULSION SYSTEMS,ENERGY STORAGE↗
DOE OSTI2025

In situ self-ion (Fe + ) irradiation of ODS-FeCrAl alloy fuel cladding materials with different Cr contents: The early stages of Cr-rich α’ phase precipitation

Oxide-dispersion-strengthened FeCrAl (ODS-FeCrAl) alloys are candidate accident-tolerant fuel cladding materials for light water reactors because they demonstrate satisfactory resistance to materials degradation effects such as high-temperature oxidation, radiation-induced swelling, and creep. Their perspective deployment to market is challenged, however, by their inherent susceptibility to irradiation embrittlement caused by the precipitation of the brittle Cr-rich α’ phase at relatively low temperatures (≤475 °C). This work used in situ self-ion irradiation (150 keV Fe + ) in a transmission electron microscope to elucidate the early stages of Cr-rich α’ phase precipitation in three candidate ODS-FeCrAl alloy fuel cladding materials with different Cr contents (10, 12, and 20 wt.%) and microstructures. The early stages of the process resulting in the precipitation of the Cr-rich α’ phase in these three ODS-FeCrAl alloys under Fe + irradiation were investigated at room temperature and 300 °C up to total fluences of 1.7 × 10 15 ions·cm -2 (2 dpa) and 3.4 × 10 15 ions·cm -2 (4 dpa), using three damage dose rates (5 × 10 –5 , 3.3 × 10 –4 , and 2 × 10 –3 dpa·s -1 ). Post-irradiation examination via scanning transmission electron microscopy, energy-dispersive X-ray spectroscopy and electron energy loss spectroscopy suggested that the precipitation of the Cr-rich α’ phase might be promoted by the phase separation of the alloy matrix into Cr-rich and Fe-rich regions. Interestingly, oxygen impurities segregated preferentially in the Cr-rich regions, possibly promoting the radiation-assisted formation of the Cr-rich α’ phase. α’ phase precipitation was more pronounced at room temperature when compared to 300 °C, and it was clearly promoted by the progressive increase in the Cr content of the ODS-FeCrAl alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Intrinsic Li Distribution in Layered Transition-Metal Oxides Using Low-Dose Scanning Transmission Electron Microscopy and Spectroscopy

Understanding Li distribution in layered lithium transition-metal oxide (LiTMO) cathodes in Li-ion batteries has been a major challenge at the atomic scale and nanoscale. Li is extremely difficult to study by transmission electron microscopy (TEM) because the high-energy electrons impart significant energy and cause massive migration. Here, we directly map the intrinsic spatial distribution and bonding of Li in LiNiO 2 -layered cathode materials using low-dose and low-loss electron energy loss spectroscopy (EELS). EELS spectra of the Li–K edge are measured simultaneously with O–K and Ni–L, M 3,2 edges from layered, cation-mixed, and rock-salt phases and directly matched with atomic-resolution scanning TEM images to correlate the changes in peak intensities and positions to the stoichiometry changes with continual loss of Li and O. Changes in the Li content in the LiNiO 2 particles as a function of electron beam dose are studied by sequential Li spectroscopic mapping. We show that the “intrinsic” Li distribution can be observed using a total dose of less than ~1.5 × 10 8 e – nm –2 at an accelerating voltage of 80 kV. The method of nanoscale mapping of Li distribution introduced in this study is applicable to high-Ni LiTMO cathode materials (>89% of Ni) as well as LiNiO 2 . Further study on the extra peaks of the Li–K edge reveals that the peak at ~59 eV is from the Li ions intercalated in between NiO 2 layers barely interacting with each other with less Li K shell electrons pulled to the L shell electrons in NiO 2 . Furthermore, the results shown here provide improved low-loss TEM characterization approaches that can be used to understand the intrinsic fundamental behaviors in Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Leveraging hyperspectral imaging to identify drought tolerant Populus species and genotypes within species

The aim of this study was to identity variation in drought tolerance across genotypes of Populus deltoides, Populus trichocarpa, and hybrids of the two species. A panel of 102 Populus genotypes, comprising 37 genotypes of P. trichocarpa, 37 of P. deltoides and 28 unique hybrid genotypes (P. trichocarpa x P. deltoides and P. deltoides x P. trichocarpa) were evaluated in the greenhouse under two treatments, well-watered (WW) and drought (DS). Plant physiological data were collected throughout the experiment once the drought treatment began. Throughout the experiment, we tracked soil volumetric water content, pot weight, stomatal conductance, quantum yield of photosystem II, and electron transport rate. In addition to those measurements, upon completion of the experiment, we assessed above and belowground plant biomass, plant height and stem diameter, leaf number, specific leaf area, relative water content, total protein, and total chlorophyll. We obtained hyperspectral signatures of one leaf from each plant at the end of the experiment. Columns BC – LL are hyperspectral averages for one leaf from each plant at each wavelength as described in the column header.

Hyper-spectral imaging, Populus, plant stress tole↗