Search NASA⌕ Search

SEARCH · Search NASA

Results for “total scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

The structure of alkali silicate gel by total scattering methods

The structure of the alkali silicate gel (ASR) collected from the galleries of Furnas Dam in Brazil was determined by a pair distribution function (PDF) analysis of high energy X-ray diffraction data. Since this method is relatively new to concrete structure analysis a detailed introduction on the PDF method is given for glassy SiO{sub 2}. The bulk amorphous structure of the dam material is confirmed as no Bragg peaks are observed in the scattered intensity. The real space results show that the local structure of the amorphous material is similar to kanemite (KHSi{sub 2}O{sub 5}:3H{sub 2}O) however the long range layer structure of the crystal is broken up in the amorphous state, so that ordering only persists of the length scale of a few polyhedra. The silicate layer structure is a much more disordered than predicted by molecular dynamics models. The X-ray results are consistent with the molecular dynamics model of Kirkpatrick et al. (2005) [1] which predicts that most of the water resides in pores within the amorphous network rather than in layers. The total scattering data provide a rigorous basis against which other models may also be tested.

36 MATERIALS SCIENCE↗

Local structural disorder in Zn{sub 0.9}Co{sub 0.1}O nanocrystals studied using neutron total scattering analysis

Neutron total scattering measurements were performed at 300 K and 15 K to study local structural disorder in deuterium plasma treated and as-prepared Zn{sub 0.9}Co{sub 0.1}O nanocrystalline powder. We found that static disorder becomes a determining factor for atomic pair correlations on the length scale larger than r{approx}9A. On the source of the static disorder, we propose a partial occupancy of Zn/Co further away from its crystallographic site along the c-axis. Between the deuterium plasma treated and as-prepared Zn{sub 0.9}Co{sub 0.1}O samples, we observed no local structural difference, which suggests that no additional disorder is induced by the deuterium plasma treatment.

36 MATERIALS SCIENCE↗

Illustrated formalisms for total scattering data: a guide for new practitioners

The total scattering method is the simultaneous study of both the real- and reciprocal-space representations of diffraction data. While conventional Bragg-scattering analysis (employing methods such as Rietveld refinement) provides insight into the average structure of the material, pair distribution function (PDF) analysis allows for a more focused study of the local atomic arrangement of a material. Generically speaking, a PDF is generated by Fourier transforming the total measured reciprocal-space diffraction data (Bragg and diffuse) into a real-space representation. However, the details of the transformation employed and, by consequence, the resultant appearance and weighting of the real-space representation of the system can vary between different research communities. As the worldwide total scattering community continues to grow, these subtle differences in nomenclature and data representation have led to conflicting and confusing descriptions of how the PDF is defined and calculated. This paper provides a consistent derivation of many of these different forms of the PDF and the transformations required to bridge between them. Some general considerations and advice for total scattering practitioners in selecting and defining the appropriate choice of PDF in their own research are presented. This contribution aims to benefit people starting in the field or trying to compare their results with those of other researchers.

36 MATERIALS SCIENCE↗

Threshold photoelectron source for the study of low-energy electron scattering: Total cross section for electron scattering from krypton in the energy range from 14 meV to 20 eV

An experimental technique for the measurement of the total cross section for electron scattering from atoms and molecules at high resolution is described. The total cross sections for electron scattering from Kr in the energy range from 14 meV to 20 eV obtained with the technique are also reported. The present technique employs a combination of the penetrating field technique and the threshold photoionization of rare-gas atoms using synchrotron radiation as an electron source in order to produce a high-resolution electron beam at very low energy. The characteristics of the electron sources were determined by measuring the ionizing photon energy dependence of photoelectron yield. Absolute total cross sections for electron scattering are obtained by the attenuation method. The measured absolute values of the total cross sections for electron scattering from Kr agree with those obtained by other groups down to 175 meV, above which several experimental works have been reported. Below 175 meV, the present results generally agree with theoretical cross sections down to 14 meV. The resonant structures in the total cross sections due to Kr{sup -} (4p{sup 5}5s{sup 2} {sup 2}P{sub 3/2}) and the Kr{sup -} (4p{sup 5}5s{sup 2} {sup 2}P{sub 1/2}) Feshbach resonances are also reported. The resolution of the present setup has been estimated from a fit of the measured profile of the Kr{sup -} (4p{sup 5}5s{sup 2} {sup 2}P{sub 3/2}) resonance by the theoretical curve obtained from the resonant scattering theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Airborne Aerosol in Situ Measurements during TCAP: A Closure Study of Total Scattering

We present here a framework for calculating the total scattering of both non-absorbing and absorbing aerosol at ambient conditions from aircraft data. The synergistically employed aircraft data involve aerosol microphysical, chemical, and optical components and ambient relative humidity measurements. Our framework is developed emphasizing the explicit use of the complementary chemical composition data for estimating the complex refractive index (RI) of particles, and thus obtaining improved ambient size spectra derived from Optical Particle Counter (OPC) measurements. The feasibility of our framework for improved calculations of total aerosol scattering is demonstrated for different ambient conditions with a wide range of relative humidities (from 5 to 80%) using three types of data collected by the U.S. Department of Energy (DOE) G-1 aircraft during the recent Two-Column Aerosol Project (TCAP). Namely, these three types of data employed are: (1) size distributions measured by an Ultra High Sensitivity Aerosol Spectrometer (UHSAS; 0.06-1 µm), a Passive Cavity Aerosol Spectrometer (PCASP; 0.1-3 µm) and a Cloud and Aerosol Spectrometer (CAS; 0.6- >10 µm), (2) chemical composition data measured by an Aerosol Mass Spectrometer (AMS; 0.06-0.6 µm) and a Single Particle Soot Photometer (SP2; 0.06-0.6 µm), and (3) the dry total scattering coefficient measured by a TSI integrating nephelometer at three wavelengths (0.45, 0.55, 0.7 µm) and scattering enhancement factor measured with a humidification system at three RHs (near 45%, 65% and 90%) at a single wavelength (0.525 µm). We demonstrate that good agreement (~10% on average) between the observed and calculated scattering at these three wavelengths can be obtained using the best available chemical composition data for the RI-based correction of the OPC-derived size spectra. We also demonstrate that ignoring the RI-based correction and using non-representative RI values can cause a substantial underestimation (~40% on average) and overestimation (~35% on average) of the calculated total scattering, respectively.

14 SOLAR ENERGY↗

A comparative study of small field total scatter factors and dose profiles using plastic scintillation detectors and other stereotactic dosimeters: The case of the CyberKnife

Purpose: Small-field dosimetry is challenging, and the main limitations of most dosimeters are insufficient spatial resolution, water nonequivalence, and energy dependence. The purpose of this study was to compare plastic scintillation detectors (PSDs) to several commercial stereotactic dosimeters by measuring total scatter factors and dose profiles on a CyberKnife system. Methods: Two PSDs were developed, having sensitive volumes of 0.196 and 0.785 mm{sup 3}, and compared with other detectors. The spectral discrimination method was applied to subtract Cerenkov light from the signal. Both PSDs were compared to four commercial stereotactic dosimeters by measuring total scatter factors, namely, an IBA dosimetry stereotactic field diode (SFD), a PTW 60008 silicon diode, a PTW 60012 silicon diode, and a microLion. The measured total scatter factors were further compared with those of two independent Monte Carlo studies. For the dose profiles, two commercial detectors were used for the comparison, i.e., a PTW 60012 silicon diode and Gafchromics EBT2. Total scatter factors for a CyberKnife system were measured in circular fields with diameters from 5 to 60 mm. Dose profiles were measured for the 5- and 60-mm cones. The measurements were performed in a water tank at a 1.5-cm depth and an 80-cm source-axis distance. Results: The total scatter factors measured using all the detectors agreed within 1% with the Monte Carlo values for cones of 20 mm or greater in diameter. For cones of 10-20 mm in diameter, the PTW 60008 silicon diode was the only dosimeter whose measurements did not agree within 1% with the Monte Carlo values. For smaller fields (<10 mm), each dosimeter type showed different behaviors. The silicon diodes over-responded because of their water nonequivalence; the microLion and 1.0-mm PSD under-responded because of a volume-averaging effect; and the 0.5-mm PSD was the only detector within the uncertainties of the Monte Carlo simulations for all the cones. The PSDs, the PTW 60012 silicon diode, and the Gafchromics EBT2 agreed within 2% and 0.2 mm (gamma evaluation) for the measured dose profiles except in the tail of the 60-mm cone. Conclusions: Silicon diodes can be used to accurately measure small-field dose profiles but not to measure total scatter factors, whereas PSDs can be used to accurately measure both. The authors' measurements show that the use of a 1.0-mm PSD resulted in a negligible volume-averaging effect (under-response of Almost-Equal-To 1%) down to a field size of 5 mm. Therefore, PSDs are strong candidates to become reference radiosurgery detectors for beam characterization and quality assurance measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Cobalt Coordination and Clustering in [alpha]-Co(OH)[subscript 2] Revealed by Synchrotron X-ray Total Scattering

Structures of layered metal hydroxides are not well described by traditional crystallography. Total scattering from a synthesis-controlled subset of these materials, as described here, reveals that different cobalt coordination polyhedra cluster within each layer on short length scales, offering new insights and approaches for understanding the properties of these and related layered materials. Structures related to that of brucite [Mg(OH){sub 2}] are ubiquitous in the mineral world and offer a variety of useful functions ranging from catalysis and ion-exchange to sequestration and energy transduction, including applications in batteries. However, it has been difficult to resolve the atomic structure of these layered compounds because interlayer disorder disrupts the long-range periodicity necessary for diffraction-based structure determination. For this reason, traditional unit-cell-based descriptions have remained inaccurate. Here we apply, for the first time to such layered hydroxides, synchrotron X-ray total scattering methods - analyzing both the Bragg and diffuse components - to resolve the intralayer structure of three different {alpha}-cobalt hydroxides, revealing the nature and distribution of metal site coordination. The different compounds with incorporated chloride ions have been prepared with kinetic control of hydrolysis to yield different ratios of octahedrally and tetrahedrally coordinated cobalt ions within the layers, as confirmed by total scattering. Real-space analyses indicate local clustering of polyhedra within the layers, manifested in the weighted average of different ordered phases with fixed fractions of tetrahedrally coordinated cobalt sites. These results, hidden from an averaged unit-cell description, reveal new structural characteristics that are essential to understanding the origin of fundamental material properties such as color, anion exchange capacity, and magnetic behavior. Our results also provide further insights into the detailed mechanisms of aqueous hydrolysis chemistry of hydrated metal salts. We emphasize the power of the methods used here for establishing structure-property correlations in functional materials with related layered structures.

43 PARTICLE ACCELERATORS↗

The atomic structure of lead-free Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} by using neutron total scattering analysis

We conducted neutron total scattering measurements on lead-free Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3}-0.5(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3} (BZT-0.5BCT) ceramic at 300 K and 150 K, and studied both long-range and local structures near the morphotropic phase boundary. Despite the long-range phase transition from tetragonal to rhombohedral structures, we found that local atomic structure of BZT-0.5BCT barely changes between 300 K and 150 K. To incorporate both long-range and local structures in a consistent way, we performed reverse Monte Carlo modeling. In BZT-0.5BCT, we found that the Ca substitution on Ba sites causes little impact on the local displacement of Ti ion but enhances octahedral tilting of ZrO{sub 6}, resulting in nonuniform lattice distortion.

36 MATERIALS SCIENCE↗

Exploring local atomic arrangements in amorphous and metastable phase change materials with x-ray and neutron total scattering

Very little experimental work has conclusively explored the structural transformation between the amorphous and metastable crystalline phases of phase change chalcogenides. A recent flurry of theoretical work has supported likely mechanisms for the phase transition process in Ge-Sb-Te (GST) compositions and invigorated efforts at probing local atomic arrangements experimentally. The pair distribution function (PDF) formalism of total scattering data provides directly both local structure correlations at low real-space dimensions, and intermediate range order at higher length scales, a distinct advantage for following the relevant phase transition in phase change materials (PCM). A challenge facing the field is the difficulty in distinguishing separate peak contributions to pair correlation functions in amorphous and highly disordered samples. For example, various types of local order have been reported for Ge{sub x}Te{sub 1-x} phases, including both random mixtures and discrete structural units, and both 4-fold and 6-fold coordination around Ge. We describe our efforts in advancing capabilities for extracting and refining differential or partial pair distribution function data sets by combining neutron and x-ray total scattering, with extensions to isotopic substitution and anomalous x-ray scattering. Our results combining neutron and x-ray scattering for the Ge{sub x}Te{sub 1-x} series, for example, clearly distinguish Ge-Te and Te-Te contributions in nearest neighbor correlations. Presenting an additional challenge, phase change materials with fast switching speeds (those arguably of greatest technological interest) have stable bulk crystalline phases and do not readily form glasses until reduced to small dimensions. Thin film samples are inherently difficult to probe with conventional crystallographic methods. We demonstrate successful synchrotron x-ray total scattering experiments for PCM thin films with thicknesses between 100 nm and 1 um and describe how chemical short-range order and local bonding environments vary in amorphous, metastable and crystalline GeSb{sub 2}Te{sub 4} films. Total scattering methods for powders and thin films allow for a direct comparison of PCM properties (crystallization temperature, optical contrast between phases, phase change speed, etc.) with observed local structure and motivate further exploration into the atomic configurations enabling this fascinating class of materials.

36 MATERIALS SCIENCE↗