Search NASA⌕ Search

SEARCH · Search NASA

Results for “transition metal silicates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Cr silicate as a prototype for engineering magnetic phases in air-stable two-dimensional transition-metal silicates

Abstract Identifying environmentally inert, ferromagnetic two-dimensional (2D) materials with high Curie temperatures ( T c ) down to the single layer limit has been an obstacle to fundamental studies of 2D magnetism and application of 2D heterostructures to spin-polarized devices. To address this challenge, the growth, structure and magnetic properties of a 2D Cr-silicate single layer on Pt(111) was investigated experimentally and theoretically. The layer was grown by sequentially depositing SiO and Cr followed by annealing in O 2 . Scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), and low energy electron microscopy all indicated a well-ordered layer that uniformly covered the surface, with STM and LEED indicating that the silicate relaxed to its favored lattice constant. Further experimental characterizations demonstrated that the Cr was nominally 3+ but with a lower electron density than typical trivalent Cr compounds. Comparison with theory identified a Cr 2 Si 2 O 9 structure that resembles a single layer of a dehydrogenated dioctahedral silicate. Magnetic circular dichroism in x-ray absorption spectroscopy revealed a ferromagnetically ordered state up to at least 80 K. Theoretical analysis revealed that the Cr in a dehydrogenated Cr-silicate/Pt(111) is more oxidized than Cr in freestanding Cr 2 Si 2 O 9 H 4 layers. This greater oxidation was found to enhance ferromagnetic coupling and suggests that the magnetism may be tuned by doping. The 2D Cr-silicate is the first member of a broad series of possible layered first-row transition metal silicates with magnetic order; thus, this paper introduces a new platform for investigating 2D ferromagnetism and the development of magnetoelectronic and spintronic devices by stacking 2D atomic layers.

2D materials↗
DOE OSTI2022

Rare Earth and Transition Metal Containing Glasses

Transition metal (TM) and rare earth (RE) ions have been incorporated into many glass systems such as silicate, phosphate, and borosilicate-based oxide glasses, as well as in halide and chalcogenide glasses, that find applications ranging from optical, photonic, and magnetic devices, solid-state battery, to nuclear waste disposal. Understanding the structural role of RE and TM in these glasses can help to develop glass compositions for targeted applications with either high-optical emission efficiency, electrical conductivity, or chemical durability. In this chapter, we first provide a general introduction of the applications and structural features of RE and TM in glasses, then the critical aspects of molecular dynamics (MD) simulations of these glasses such as interatomic potentials, structural analysis tools to study RE and TM ions in glasses and their clustering behaviors, Quantitative Structure–Property Analysis (QSPR), diffusion and dynamic property calculations, and electronic structure calculations to understand electronic defects such as charge trapping and radiation effects are introduced. Three representative case studies are presented: the first one is on MD simulations of erbium- and europium-doped silica and silicate glasses, as well as cerium doped aluminophosphate glasses, that revealed the effect of glass composition on RE ion local structure and clustering behavior. Electronic structure calculations of cerium-doped glass show how the existence of multioxidation states help to mediate radiation-induced damages caused by excited electron–hole pairs was also discussed. The second one focuses on alkali vanadophosphate glasses where the existence of two vanadium oxidation states help to provide electronic conduction in the glasses while alkali ions provide ionic conduction. MD simulations were used to understand vanadium environments and other structural aspects in the phosphate glasses, as well as the ionic transport behaviors of alkali ions. The third case study is on zirconium-containing borosilicate and aluminosilicate glasses that find wide applications in nuclear waste disposal. MD simulations help to provide structural details of zirconium ions that are validated by diffraction and EXAFS spectra. The structural information was used to interpret changes of mechanical properties and chemical durability by using QSPR and other analyses-based MD-generated structure models.

Du, Jincheng↗
DOE OSTI2024

Insights into Dopant-Mediated Tuning of Silica-Supported Mo Metal Centers for Enhanced Olefin Metathesis

Here, we show that the electronic environment around active Mo centers supported on mesoporous silicates can be tuned by the addition of transition metals creating highly dispersed bimetallic catalysts that display enhanced activity for ethylene + 2-butene metathesis to propylene. The bimetallic catalysts are prepared by incorporating electrophilic Lewis acid metals (M) such as Nb, Ta, Zr, or Hf as dopant promoters into mesoporous KIT-6 supports using a one-pot sol–gel technique followed by impregnation of the Mo species. All the bimetallic Mo/M-KIT-6 catalysts display better activity than monometallic Mo/KIT-6 catalyst (28.7 ± 1.1 mmol (mol Mo s ) –1 ), with (Mo/Nb-KIT-6) catalysts exhibiting maximum propylene formation rates (54.2 ± 0.5 mmol (mol Mo s ) –1 ) at an identical Mo loading.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Natural isotopic compositions of titanium, iron, and nickel observed in commercial fuel pellets – Promising candidate elements for stable isotope tagging

Stable isotope taggants would constitute unique identifiers for nuclear fuel cycle materials, resulting in expedited timelines and high confidence provenance assessments for nuclear forensics investigations. However, reliably identifying and interpreting stable isotope taggants in nuclear materials recovered from outside of regulatory control will largely be predicated on the assumption that the taggant element intrinsic to the untagged nuclear material exhibits natural isotopic ratios. Here, we present high-precision Ti, Fe, and Ni isotope compositions in 13 commercial low-enriched uranium (LEU) fuel pellets to assess the suitability of these transition metals as stable isotope taggants. Our investigations reveal limited isotope variations among the fuel pellets in all three elements, which are consistent with small mass-dependent isotope fractionations, comparable to variations previously reported for natural samples. In practice, isotopically tagged nuclear materials are expected to fall along isotopic mixing lines, since intrinsic background levels of taggant elements dilute the taggant towards natural isotope compositions. Furthermore, the observation that Ti, Fe, and Ni isotope compositions in a suite of LEU fuel pellets are close to or indistinguishable from estimates for the Bulk Silicate Earth demonstrates that a two end-member mixing assumption would be valid for these transition metals, indicating that all three are promising candidate elements for stable isotope tagging. Finally, we present mass balance calculations to quantify isotopic perturbations expected from admixing isotopically anomalous Ti, Fe, and Ni taggants to assess the interplay between elemental and taggant concentrations and find favorable compromises for facilitating successful taggant identification with current analytical methods.

Intentional forensics↗
DOE OSTI2023

Wave vector and field vector orientation dependence of Fe K pre-edge X-ray absorption features in clinopyroxenes

Abstract Pre-edge X-ray absorption features are commonly used to derive redox states for transition metal oxides in crystals and glasses. Several calibrations for Fe2+ and Fe3+ in silicate glasses have utilized the general relationships among pre-edge peak intensity, energy, and redox state. However, absorption variations complicate those relationships in anisotropic crystals. Although absorption anisotropy at and above the energy of the rising edge adheres to the typical cos2 relationship observed in absorption spectroscopies at other energies, the anisotropy of the pre-edge is far more complicated. Prior studies focusing on pre-edge absorption anisotropy demonstrate a 1-cos4φ dependence of absorption magnitudes with rotation. Experiments presented here show that absorption magnitudes of the pre-edge vary as a function of both electric field vector orientation and wave vector direction. However, rotations around the field vector axis or wave vector axis individually result in cos2 dependence of absorption magnitudes. Rotations where both wave vector and field vector orientation are varied are not well fit by either model in the pre-edge. The resulting anisotropy complicates the process of measuring characteristic absorption in the pre-edge, making valence state determinations challenging for strongly anisotropic crystal structures such as pyroxene.

Geochemistry & Geophysics↗
DOE OSTI2026

Effects of Composition and Oxidation States on the Structures of Chromium-Containing Sodium Silicate Glasses: Molecular Dynamics Simulations using Machine Learning Interatomic Potentials

Chromium represents a significant challenge for the vitrification of high-level nuclear waste into silicate and borosilicate glasses due to its low solubility and variable oxidation states, which can limit the waste loading due to promotion of crystallization or phase separation during processing. In this study, we modeled chromium containing silicate glasses using molecular dynamics simulations with three machine learning interatomic potentials (MLIPs), MACE, CHGNet, and PFP were employed, to gain insights on glass composition and oxidation states on the structures of these glasses. One of the goals is to evaluate their ability of these MLIPs to accurately represent the general structure of silicate glasses and chromium local environments as a function of chromium oxidation states. Density Functional Theory (DFT) based calculations and experimental data such as neutron structure factors were used to validate the structural models. It was found that the foundation models of all three MLIPs are able to reproduce general structural features of the sodium silicate glass structure consistent with experimental and DFT data, but only CHGNet and PFP can accurately capture the oxidation states and local environment of chromium: tetrahedral for Cr6+ and octahedral for Cr3+. Furthermore, we studied the effect of varying Cr3+/ Cr6+ (Cr3+/Crtotal) ratio and total chromium content using PFP. Our results show that Cr6+ enhances network polymerization by reducing non-bridging oxygens through Na? charge compensation required due to the formation of chromate (CrO42-) species, while Cr³? acts as a network modifier that disrupts connectivity. System size effects on the structural characteristics and chromium environments were also tested using the PFP potential. This work highlights the importance of careful validation on the precision, transferability, and potential of MLIPs for modeling glasses containing transition metal elements that can exist in multiple oxidation states. It is also encouraging to see the foundational models are all three MLFFs are able to reproduce the basic sodium silicate glass structures, while suggesting additional training or refining is needed to improve the description of more complex systems containing transition metals.

Puga, Christina L.↗
DOE OSTI2021

Architected mesoporous crystalline magnesium silicates with ordered pore structures

Novel approaches to harness earth abundant silicates as building blocks for carbon dioxide removal, capture, utilization, and storage are gaining increasing attention in the context of sustainable and low carbon energy and resource recovery. Advancing a calibrated understanding of these fluid-silicate interactions is essential for developing scalable processes. One of the challenges in developing predictive controls over these interactions is the compositional and morphological heterogeneity of naturally occurring, heterogeneous magnesium silicate minerals. To address this challenge, the synthesis of architected mesoporous crystalline magnesium silicate (Mg 2 SiO 4 ) is proposed. While synthesis routes for producing amorphous mesoporous magnesium silicates have been developed via sol-gel methods, approaches to synthesize crystalline magnesium silicates with well-controlled pore size distributions have not been explored. The conventional approaches of converting matter that is amorphous to crystalline states at elevated temperatures results in a heterogeneous pore size distribution. To develop controls on pore size distribution, amorphous mesoporous magnesium silicates are coated with carbon. This approach preserves the pore size distributions during the amorphous to crystalline transformations of Mg-silicates at elevated temperatures. The carbon coating is removed on heating. Magnesium silicate particles produced using this approach have highly ordered pores around 2.58 nm and a specific surface area of 124.25 m 2 /g. In this study, we report the chemical compositions, morphologies, phase transitions, and pore structures of the intermediate materials produced during the synthesis of crystalline mesoporous magnesium silicates. The transitions, and pore structures of the intermediate materials produced during the synthesis of crystalline mesoporous magnesium silicates. Furthermore, the synthesis routes discussed in this study can be applied translationally to produce metal silicates with ordered mesoporous structures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Towards new zero-thermal-expansion materials: Li-free quartz solid solutions stuffed with transition metal cations

Stuffed aluminosilicate quartz solid solutions (Qss) represent the main functional component of state-of-the-art zero-thermal-expansion glass-ceramics. For the first time, we present the synthesis of Li-, Mg- and Zn-free Qss solely stuffed with transition metal cations (Fe 2+ , Ni 2+ , Co 2+ ); partial Li + co-doping enables also significant Mn 2+ incorporation. Further, they were obtained by glass powder crystallization; Qss crystals exhibit compositionally tunable coefficients of thermal expansion (CTEs), from - 2 × 10 -6 K -1 to ~10 × 10 -6 K -1 in the range 30–300 °C. Co 2+ -bearing crystals exhibit the closest-to-zero CTE value (0.2 ×10 -6 K -1 ) and the most isotropic behavior in the whole Qss family, opening up new perspectives for the development of Li-free low-expansion materials. From a structural point of view, we identified the unit cell volume (and not the pseudo-hexagonality of the aluminosilicate framework) as the key structural parameter leading to low or negative CTEs in Qss, with a linear correlation extending to non-stuffed non-silicate quartz-like phases.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Synthesis and Stability of an Eight‐Coordinated Fe 3 O 4 High‐Pressure Phase: Implications for the Mantle Structure of Super‐Earths

Abstract Super‐Earths ranging up to 10 Earth masses (M E ) with Earth‐like density are common among the observed exoplanets thus far, but their measured masses and radii do not uniquely elucidate their internal structure. Exploring the phase transitions in the Mg‐silicates that define the mantle‐structure of super‐Earths is critical to characterizing their interiors, yet the relevant terapascal conditions are experimentally challenging for direct structural analysis. Here we investigated the crystal chemistry of Fe 3 O 4 as a low‐pressure analog to Mg 2 SiO 4 between 45–115 GPa and up to 3000 K using powder and single crystal X‐ray diffraction in the laser‐heated diamond anvil cell. Between 60–115 GPa and above 2000 K, Fe 3 O 4 adopts an 8‐fold coordinated Th 3 P 4 ‐type structure ( I ‐43d, Z = 4) with disordered Fe 2+ and Fe 3+ into one metal site. This Fe‐oxide phase is isostructural with that predicted for Mg 2 SiO 4 above 500 GPa in super‐Earth mantles and suggests that Mg 2 SiO 4 can incorporate both ferric and ferrous iron at these conditions. The pressure‐volume behavior observed in this 8‐fold coordinated Fe 3 O 4 indicates a maximum 4% density increase across the 6‐ to 8‐fold coordination transition in the analog Mg‐silicate. Reassessment of the FeO—Fe 3 O 4 fugacity buffer considering the Fe 3 O 4 phase relationships identified in this study reveals that increasing pressure and temperature to 120 GPa and 3000 K in Earth and planetary mantles drives iron toward oxidation.

Zurkowski, C. C.↗
DOE OSTI2025

Building wet planets through high-pressure magma–hydrogen reactions

Close-in transiting sub-Neptunes are abundant in our Galaxy. Planetary interior models based on their observed radius–mass relationship suggest that sub-Neptunes contain a discernible amount of either hydrogen (dry planets) or water (wet planets) blanketing a core composed of rocks and metal. Water-rich sub-Neptunes have been believed to form farther from the star and then migrate inwards to their present orbits. Here we report experimental evidence of reactions between warm, dense hydrogen fluid and silicate melt that release silicon from the magma to form alloys and hydrides at high pressures. We found that oxygen liberated from the silicate melt reacts with hydrogen, producing an appreciable amount of water up to a few tens of weight per cent, which is much greater than previously predicted based on low-pressure ideal gas extrapolation. Consequently, these reactions can generate a spectrum of water contents in hydrogen-rich planets, with the potential to reach water-rich compositions for some sub-Neptunes, implying an evolutionary relationship between hydrogen-rich and water-rich planets. Therefore, detection of a large amount of water in exoplanet atmospheres may not be the optimal evidence for planet migration in the protoplanetary disk, calling into question the assumed link between composition and planet formation location.

Horn, H. W. [Arizona State University, Tempe, AZ (↗
DOE OSTI2020

Linking low and high temperature NO oxidation mechanisms over Brønsted acidic chabazite to dynamic changes of the active site

The oxidation of NO over Brønsted acid sites in chabazite (CHA) zeolites shows an atypical temperature dependence; at low temperature the apparent activation energy is negative, but it becomes positive as the temperature exceeds a transition temperature. To explain this behavior we used density functional theory and statistical mechanics to investigate high and low temperature mechanisms for this reaction and propose a dynamic active site change in response to temperature variation. Our simulations show that the apparent activation barrier in the low temperature regime is more negative over Brønsted acidic CHA as compared to the siliceous zeolite framework. This effect is attributed to further enthalpic stabilization of the transition states by physical interaction with the H-CHA Brønsted acid sites. At elevated temperature, our calculations support both the existence and the significant catalytic role of NO+ in providing a modified active site. The temperature dependent transformation of the active site from H-CHA to NO-CHA sites may occur via two plausible ion-exchange mechanisms that define a transition temperature for the reaction. This transition temperature can be tuned by incorporating different trivalent metal atoms (B, Al, Ga or In) within the CHA framework. We found the lowest transition temperature for H-[In] CHA and H-[Ga]CHA. Here, the ability to control the dynamic response of the active site and the associated switch between low and high temperature mechanism with negative and positive apparent activation energy, respectively, is of fundamental interest for the design of zeolite catalysts operating in the presence of NO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

PRODUCTION OF GLASS-TO-METAL SEALS USING ADDITIVE MANUFACTURING TECHNIQUES

Glass-to-metal (GtM) seals are hermetic barriers between glass and metal components, often used in the electronic and vacuum industries. Creating the seals traditionally requires heating all the components to the glass melting temperature, where the glass will flow and bond to the metal. Due to the manufacturing constraints of the individual components and sealing conditions there are geometric and material restrictions. Additive manufacturing techniques were used to make GtM seals to reduce these restrictions. Hermetic, single pin seals were produced using printed metal shells, by selective laser melting (SLM), and digital light processing (DLP) printed glass preforms. Glass preforms were printed with photosensitive resin mixed with a silicate sealing glass powder in a 1:2 weight ratio. Thermal analysis, TGA/DSC, and screening experiments were used to determine an organic removal schedule. Video techniques determined a sintering schedule by producing a densification curve at different isothermal holds which were fit with a viscous sintering model. Single pin seals were also produced use a laser assisted manufacturing (LAM) process as an alternative to the conventional furnace sealing process. A Nd:YAG laser was focused on a solid glass preform, heating the glass to form the glass-metal bond. The sealing glass was doped with a transition metal oxide, Fe2O3 or CuO, to increase absorption of the laser wavelength. The interface of hermetic LAM seals were analyzed using electron microscopy, compared to conventional prepared seals, finding a reduction of interfacial morphologies.

Read, Aaron Reece↗
DOE OSTI2021

The TESS-Keck Survey. II. An Ultra-short-period Rocky Planet and Its Siblings Transiting the Galactic Thick-disk Star TOI-561

We report the discovery of TOI-561, a multiplanet system in the galactic thick disk that contains a rocky, ultra-short-period planet. This bright (V = 10.2) star hosts three small transiting planets identified in photometry from the NASA TESS mission: TOI-561 b (TOI-561.02, P = 0.44 days, R {sub p} = 1.45 ± 0.11 R {sub ⊕}), c (TOI-561.01, P = 10.8 days, R {sub p} = 2.90 ± 0.13 R {sub ⊕}), and d (TOI-561.03, P = 16.3 days, R {sub p} = 2.32 ± 0.16 R {sub ⊕}). The star is chemically ([Fe/H] = −0.41 ± 0.05, [α/Fe] = +0.23 ± 0.05) and kinematically consistent with the galactic thick-disk population, making TOI-561 one of the oldest (10 ± 3 Gyr) and most metal-poor planetary systems discovered yet. We dynamically confirm planets b and c with radial velocities from the W. M. Keck Observatory High Resolution Echelle Spectrometer. Planet b has a mass and density of 3.2 ± 0.8 M {sub ⊕} and 5.5{sub −1.6}{sup +2.0} g cm{sup −3}, consistent with a rocky composition. Its lower-than-average density is consistent with an iron-poor composition, although an Earth-like iron-to-silicates ratio is not ruled out. Planet c is 7.0 ± 2.3 M {sub ⊕} and 1.6 ± 0.6 g cm{sup −3}, consistent with an interior rocky core overlaid with a low-mass volatile envelope. Several attributes of the photometry for planet d (which we did not detect dynamically) complicate the analysis, but we vet the planet with high-contrast imaging, ground-based photometric follow-up, and radial velocities. TOI-561 b is the first rocky world around a galactic thick-disk star confirmed with radial velocities and one of the best rocky planets for thermal emission studies.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Advances in catalytic production processes of biomass-derived vinyl monomers

Plastic industries currently source the majority of monomers from crude oil substances. Although we have witnessed a significant interest of companies in the utilization of sustainable feedstock materials for bio-based compound synthesis in the past decade, the transition to photosynthetic or chemosynthetic plant-based production in a circular carbon economy is largely slow due to complex biomass processing, costs and related reaction factors. The upgrade of the separated platform chemicals with a deeper supporting understanding of processes, models and a root–cause analysis about the underlying distribution challenges of engineered transformation mechanisms, catalyzed conversion pathways and selectivity would be beneficial to advance applied scientific development, bio-refining and manufacturing output amount. This review provides a summary, assessment and perspective for three important polymer-forming vinyl molecules, i.e. acrylic acid, methacrylic acid and styrene. These provide a backbone to produce acrylates, polystyrene, resins, rubbers, protective surface coatings, adhesives, textiles and other obtained copolymers. A succinct analytical overview on the thermo-catalytic intermediate routes for property-wise drop-in alternatives is presented. Sugars, acrolein, allyl alcohol, ethylbenzene, glycerol, 3-hydroxypropionic acid, isobutene, itaconic acid and lactic acid are considered as the main starting reactants. Catalysts span mixed metal oxides, silicates, native or impregnated zeolite frameworks (HBEA, HZSM, and MFI) and hetero-poly acids as well as homogeneous base hydroxides or platinum group metals, supported on carbon, alumina and sulfates. Finally, the article concludes with a brief state sum-up of the results, topics and opportunities for systematic future research or scaling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Equations of state, phase relations, and oxygen fugacity of the Ru-RuO 2 buffer at high pressures and temperatures

Experimental studies and measurements of inclusions in diamonds show that ferric iron components are increasingly stabilized with depth in the mantle. To determine the thermodynamic stability of such components, their concentration needs to be measured at known oxygen fugacities. The metal-oxide pair Ru and RuO 2 are ideal as an internal oxygen fugacity buffer in high-pressure experiments. Both phases remain solid to high temperatures and react minimally with silicates, only exchanging oxygen. To calculate oxygen fugacities at high pressure and temperature, however, requires information on the phase relations and equation of state properties of the solid phases. We have made in situ synchrotron X-ray diffraction measurements in a multi-anvil press on mixtures of Ru and RuO 2 to 19.4 GPa and 1473 K with which we have determined phase relations of the RuO 2 phases and derived thermal equations of state (EoS) parameters for both Ru and RuO 2 . Rutile-structured RuO 2 was found to undergo two phase transformations, first at ~7 GPa to an orthorhombic structure and then above 12 GPa to a cubic structure. The phase boundary of the cubic phase was constrained for the first time at high pressure and temperature. We have derived a continuous Gibbs free energy expression for the tetragonal and orthorhombic phases of RuO 2 by fitting the second-order phase transition boundary and P-V-T data for both phases, using a model based on Landau theory. The transition between the orthorhombic and cubic phases was then used along with EoS terms derived for both phases to determine a Gibbs free energy expression for the cubic phase. We have used these data to calculate the oxygen fugacity of the Ru + O 2 = RuO 2 equilibrium, which we have parameterized as a single polynomial across the stability fields of all three phases of RuO 2 . The expression is log 10 f O 2 (Ru – RuO 2 ) = (7.782 – 0.00996P + 0.001932P 2 – 3.76 × 10 –5 P 3 ) + (–13 763 + 592P – 3.955P 2 )/T + (–1.05 × 10 6 – 4622P)/T 2 , which should be valid from room pressure up to 25 GPa and 773–2500 K, with an estimated uncertainty of 0.2 log units. Our calculated fO 2 is shown to be up to 1 log unit lower than estimates that use previous expressions or ignore EoS terms.

Armstrong, Katherine↗
DOE OSTI2025

Linking Manganese Fractions and Organic Carbon in Soils of Contrasting Land Use Systems

Manganese (Mn) is an essential micronutrient that influences carbon (C) cycling by binding or oxidizing soil organic matter. Mn fractions in soil and their plant availability depend largely on soil pH, which is commonly altered by agricultural practices. Fractions of Mn in soils range from readily available (e.g., bioavailable Mn, exchangeable Mn) to stabilized (e.g., Mn-oxide minerals, Mn contained in silicates). Furthermore, the distribution of soil Mn with depth was assessed in contrasting land use systems (organic agriculture, conventional agriculture, and unmanaged forest) using a sequential extraction method that targets Mn fractions ranging in bioavailability. Both agricultural sites had similar amounts of total Mn but had available Mn (1–7% of total Mn) lower than that of the unmanaged forested site (15% of total Mn). Manganese and organic C were generally positively correlated, but this relationship depended on soil depth, Mn fractions, and concentrations, while land management change had little influence.

Crops↗