SEARCH · Search NASA

Results for “triose phosphate use”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

10 records

All sources NASA NTRS DOE OSTI

DOE OSTI2022

The time course of acclimation to the stress of triose phosphate use limitation

Abstract Triose phosphate utilisation (TPU) limits the maximum rate at which plants can photosynthesise. However, TPU is almost never found to be limiting photosynthesis under ambient conditions for plants. This, along with previous results showing adaptability of TPU at low temperature, suggest that TPU capacity is regulated to be just above the photosynthetic rate achievable under the prevailing conditions. A set of experiments were performed to study the adaptability of TPU capacity when plants are acclimated to elevated CO 2 concentrations. Plants held at 1500 ppm CO 2 were initially TPU limited. After 30 h they no longer exhibited TPU limitations but they did not elevate their TPU capacity. Instead, the maximum rates of carboxylation and electron transport declined. A timecourse of regulatory responses was established. A step increase of CO 2 first caused PSI to be oxidised but after 40 s both PSI and PSII had excess electrons as a result of acceptor‐side limitations. Electron flow to PSI slowed and the proton motive force increased. Eventually, non‐photochemical quenching reduced electron flow sufficiently to balance the TPU limitation. Over several minutes rubisco deactivated contributing to regulation of metabolism to overcome the TPU limitation.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Multi‐hypothesis comparison of Farquhar and Collatz photosynthesis models reveals the unexpected influence of empirical assumptions at leaf and global scales

Abstract Mechanistic photosynthesis models are at the heart of terrestrial biosphere models (TBMs) simulating the daily, monthly, annual and decadal rhythms of carbon assimilation ( A ). These models are founded on robust mathematical hypotheses that describe how A responds to changes in light and atmospheric CO 2 concentration. Two predominant photosynthesis models are in common usage: Farquhar (FvCB) and Collatz (CBGB). However, a detailed quantitative comparison of these two models has never been undertaken. In this study, we unify the FvCB and CBGB models to a common parameter set and use novel multi‐hypothesis methods (that account for both hypothesis and parameter variability) for process‐level sensitivity analysis. These models represent three key biological processes: carboxylation, electron transport, triose phosphate use (TPU) and an additional model process: limiting‐rate selection. Each of the four processes comprises 1–3 alternative hypotheses giving 12 possible individual models with a total of 14 parameters. To broaden inference, TBM simulations were run and novel, high‐resolution photosynthesis measurements were made. We show that parameters associated with carboxylation are the most influential parameters but also reveal the surprising and marked dominance of the limiting‐rate selection process (accounting for 57% of the variation in A vs. 22% for carboxylation). The limiting‐rate selection assumption proposed by CBGB smooths the transition between limiting rates and always reduces A below the minimum of all potentially limiting rates, by up to 25%, effectively imposing a fourth limitation on A . Evaluation of the CBGB smoothing function in three TBMs demonstrated a reduction in global A by 4%–10%, equivalent to 50%–160% of current annual fossil fuel emissions. This analysis reveals a surprising and previously unquantified influence of a process that has been integral to many TBMs for decades, highlighting the value of multi‐hypothesis methods.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Triose phosphate utilization limitation: an unnecessary complexity in terrestrial biosphere model representation of photosynthesis

Triose phosphates are the principal product of photosynthesis. They are used within the chloroplast for starch synthesis, or translocated to the cytosol where they are used to fuel sucrose synthesis. Use of triose phosphate releases inorganic phosphate, and is under strict metabolic control that matches the supply of triose phosphate from the Calvin-Benson cycle to the demand for carbon by sinks (Heldt & Heldt, 2011; McClain & Sharkey, 2019). However, a low rate of triose phosphate utilization (TPU) can deplete the phosphate pool, restrict ATP synthesis and reduce the availability of ATP to power the Calvin-Benson cycle, thereby limiting photosynthesis (Sharkey, 1985).

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Controlled Enzyme Cargo Loading in Engineered Bacterial Microcompartment Shells

Bacterial microcompartments (BMCs) are nanometer-scale organelles with a protein-based shell that serve to colocalize and encapsulate metabolic enzymes. They may provide a range of benefits to improve pathway catalysis, including substrate channeling and selective permeability. Several groups are working toward using BMC shells as a platform for enhancing engineered metabolic pathways. The microcompartment shell of Haliangium ochraceum (HO) has emerged as a versatile and modular shell system that can be expressed and assembled outside its native host and with non-native cargo. Further, the HO shell has been modified to use the engineered protein conjugation system SpyCatcher–SpyTag for non-native cargo loading. Here, we used a model enzyme, triose phosphate isomerase (Tpi), to study non-native cargo loading into four HO shell variants and begin to understand maximal shell loading levels. We also measured activity of Tpi encapsulated in the HO shell variants and found that activity was determined by the amount of cargo loaded and was not strongly impacted by the predicted permeability of the shell variant to large molecules. All shell variants tested could be used to generate active, Tpi-loaded versions, but the simplest variants assembled most robustly. We propose that the simple variant is the most promising for continued development as a metabolic engineering platform.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Leaf gas exchange and fitted parameters, San Lorenzo, Panama, 2020

This data package contains photosynthetic CO2 response curves (ACi curves), light response curves (AQ curves), dark adapted dark respiration, conductance curves, and survey measurements for leaves measured at the San Lorenzo forest canopy crane site, Panama (PA-SLZ) from January to March 2020. Leaves were sampled from both the top of the canopy and multiple heights within the canopy from 10 vertical profiles and included around 50 species. In addition, six core species were also measured, from the top of the canopy. Fitted maximum carboxylation rate (Vcmax), maximum electron transport rate (Jmax), and triose phosphate utilization rate (TPU) were derived from measured data as well as the convexity, light use efficiency, apparent quantum yield, and Rdark. The measurements can also be used to derive the conductance parameters g0 and g1 of stomatal model. All the gas exchange data and metadata are presented in .csv files and complete instrument output are included in .zip folders. Data and metadata meet the ESS-DIVE leaf-level gas exchange reporting format requirements. The protocol details are provided as pdf documents. In addition to gas exchange data described here these samples were also used for measurement of leaf optical properties, carbon and nitrogen content, and leaf mass per unit leaf area (LMA) these data can be cross linked using the unique sample ID and are provided in separate related data packages. Sample information including canopy elevation and leaf area index (LAI) can be found in the related “Leaf and canopy traits” data package.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

The Dynamic Assimilation Technique measures photosynthetic CO 2 response curves with similar fidelity to steady-state approaches in half the time

The net CO 2 assimilation (A) response to intercellular CO 2 concentration (C i ) is a fundamental measurement in photosynthesis and plant physiology research. The conventional A/C i protocols rely on steady-state measurements and take 15–40 min per measurement, limiting data resolution or biological replication. Additionally, there are several CO 2 protocols employed across the literature, without clear consensus as to the optimal protocol or systematic biases in their estimations. We compared the non-steady-state Dynamic Assimilation Technique (DAT) protocol and the three most used CO 2 protocols in steady-state measurements, and tested whether different CO 2 protocols lead to systematic differences in estimations of the biochemical limitations to photosynthesis. The DAT protocol reduced the measurement time by almost half without compromising estimation accuracy or precision. The monotonic protocol was the fastest steady-state method. Estimations of biochemical limitations to photosynthesis were very consistent across all CO 2 protocols, with slight differences in Rubisco carboxylation limitation. The A/C i curves were not affected by the direction of the change of CO 2 concentration but rather the time spent under triose phosphate utilization (TPU)-limited conditions. Our results suggest that the maximum rate of Rubisco carboxylation (V cmax ), linear electron flow for NADPH supply (J), and TPU measured using different protocols within the literature are comparable, or at least not systematically different based on the measurement protocol used.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Establishing a versatile toolkit of flux enhanced strains and cell extracts for pathway prototyping

Building and optimizing biosynthetic pathways in engineered cells holds promise to address societal needs in energy, materials, and medicine, but it is often time-consuming. Cell-free synthetic biology has emerged as a powerful tool to accelerate design-build-test-learn cycles for pathway engineering with increased tolerance to toxic compounds. However, most cell-free pathway prototyping to date has been performed in extracts from wildtype cells which often do not have sufficient flux towards the pathways of interest, which can be enhanced by engineering. Here, in this study, to address this gap, we create a set of engineered Escherichia coli and Saccharomyces cerevisiae strains rewired via CRISPR-dCas9 to achieve high-flux toward key metabolic precursors; namely, acetyl-CoA, shikimate, triose-phosphate, oxaloacetate, α-ketoglutarate, and glucose-6-phosphate. Cell-free extracts generated from these strains are used for targeted enzyme screening in vitro. As model systems, we assess in vivo and in vitro production of triacetic acid lactone from acetyl-CoA and muconic acid from the shikimate pathway. The need for these platforms is exemplified by the fact that muconic acid cannot be detected in wildtype extracts provided with the same biosynthetic enzymes. We also perform metabolomic comparison to understand biochemical differences between the cellular and cell-free muconic acid synthesis systems (E. coli and S. cerevisiae cells and cell extracts with and without metabolic rewiring). While any given pathway has different interfaces with metabolism, we anticipate that this set of pre-optimized, flux enhanced cell extracts will enable prototyping efforts for new biosynthetic pathways and the discovery of biochemical functions of enzymes.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Rapid estimation of photosynthetic leaf traits of tropical plants in diverse environmental conditions using reflectance spectroscopy

Tropical forests are one of the main carbon sinks on Earth, but the magnitude of CO 2 absorbed by tropical vegetation remains uncertain. Terrestrial biosphere models (TBMs) are commonly used to estimate the CO 2 absorbed by forests, but their performance is highly sensitive to the parameterization of processes that control leaf-level CO 2 exchange. Direct measurements of leaf respiratory and photosynthetic traits that determine vegetation CO 2 fluxes are critical, but traditional approaches are time-consuming. Reflectance spectroscopy can be a viable alternative for the estimation of these traits and, because data collection is markedly quicker than traditional gas exchange, the approach can enable the rapid assembly of large datasets. However, the application of spectroscopy to estimate photosynthetic traits across a wide range of tropical species, leaf ages and light environments has not been extensively studied. Here, we used leaf reflectance spectroscopy together with partial least-squares regression (PLSR) modeling to estimate leaf respiration ( R dark25 ), the maximum rate of carboxylation by the enzyme Rubisco ( V cmax25 ), the maximum rate of electron transport ( J max25 ), and the triose phosphate utilization rate ( T p25 ), all normalized to 25°C. We collected data from three tropical forest sites and included leaves from fifty-three species sampled at different leaf phenological stages and different leaf light environments. Our resulting spectra-trait models validated on randomly sampled data showed good predictive performance for V cmax25 , J max25 , T p25 and R dark25 (RMSE of 13, 20, 1.5 and 0.3 μmol m -2 s -1 , and R 2 of 0.74, 0.73, 0.64 and 0.58, respectively). The models showed similar performance when applied to leaves of species not included in the training dataset, illustrating that the approach is robust for capturing the main axes of trait variation in tropical species. We discuss the utility of the spectra-trait and traditional gas exchange approaches for enhancing tropical plant trait studies and improving the parameterization of TBMs.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

The effects of photosynthetic rate on respiration in light, starch/sucrose partitioning, and other metabolic fluxes within photosynthesis

In the future, plants may encounter increased light and elevated CO 2 levels. How consequent alterations in photosynthetic rates will impact fluxes in photosynthetic carbon metabolism remains uncertain. Respiration in light ( R L ) is pivotal in plant carbon balance and a key parameter in photosynthesis models. Understanding the dynamics of photosynthetic metabolism and R L under varying environmental conditions is essential for optimizing plant growth and agricultural productivity. However, measuring R L under high light and high CO 2 (HLHC) conditions poses challenges using traditional gas exchange methods. In this study, we employed isotopically nonstationary metabolic flux analysis (INST-MFA) to estimate RL and investigate photosynthetic carbon flux, unveiling nuanced adjustments in Camelina sativa under HLHC. Despite numerous flux alterations in HLHC, RL remained stable. HLHC affects several factors influencing RL, such as starch and sucrose partitioning, v o /v c ratio, triose phosphate partitioning, and hexose kinase activity. Analysis of A/C i curve operational points reveals that HLHC’s major changes primarily stem from CO 2 suppressing photorespiration. Integration of these fluxes into a simplified model predicts changes in CBC labeling under HLHC. This study extends our prior discovery that incomplete CBC labeling is due to unlabeled carbon reimported during R L , offering insights into manipulating labeling through adjustments in photosynthetic rates.

Elevated CO2↗

DOE OSTI2024

The Dynamic Assimilation Technique measures photosynthetic CO2 response curves with similar fidelity as steady-state approaches in half the time

A/Ci response↗