Search NASA⌕ Search

SEARCH · Search NASA

Results for “trucks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Comparison of the nonlinear dynamic characteristics of Barber S-2 and ASF ride control freight trucks

The results of an experimental and analytical program to define the load deflection characteristics of a Barber S-2 freight truck and to compare these characteristics to those of an ASF freight truck of the same load capacity are presented. The comparison of the two trucks is made on a parameter basis and on the basis of the wheel/rail loads induced by track misalignment. The results indicate there is very little difference in the parameters and the response of the two trucks. This is of course qualified by the assumptions required in the development of the mathematical models.

Abbott, P.↗
NASA NTRS1999

A Reassessment of Heavy-Duty Truck Aerodynamic Design Features and Priorities

Between 1973 and 1982, the NASA Dryden Flight Research Center conducted "coast-down" tests demonstrating means for reducing the drag of trucks, buses, and motor homes. Numerous configurations were evaluated using a box-shaped test van, a two-axle truck, and a tractor-semitrailer combination. Results from three configurations of the test van are of interest now in view of a trucking industry goal of a 0.25 drag coefficient for tractor-semitrailer combinations. Two test van configurations with blunt-base geometry, similar to present day trucks (one configuration has square front comers and the other has rounded front comers), quantify the base drag increase associated with reduced forebody drag. Hoemer's equations predict this trend; however, test van results, reinforced by large-scale air vehicle data, indicate that Hoemer's formula greatly underestimates this dependence of base drag on forebody efficiency. The demonstrated increase in base drag associated with forebody refinement indicates that the goal of a 0.25 drag coefficient will not be achieved without also reducing afterbody drag. A third configuration of the test van had a truncated boattail to reduce afterbody drag and achieved a drag coefficient of 0.242. These results are included here and references are identified for other means of reducing afterbody drag.

Saltzman, Edwin J.↗
NASA NTRS1977

Log Truck-Weighing System

ELDEC Corp., Lynwood, Wash., built a weight-recording system for logging trucks based on electronic technology the company acquired as a subcontractor on space programs such as Apollo and the Saturn launch vehicle. ELDEC employed its space-derived expertise to develop a computerized weight-and-balance system for Lockheed's TriStar jetliner. ELDEC then adapted the airliner system to a similar product for logging trucks. Electronic equipment computes tractor weight, trailer weight and overall gross weight, and this information is presented to the driver by an instrument in the cab. The system costs $2,000 but it pays for itself in a single year. It allows operators to use a truck's hauling capacity more efficiently since the load can be maximized without exceeding legal weight limits for highway travel. Approximately 2,000 logging trucks now use the system.

Source record↗
NASA NTRS1974

Track-train dynamic analysis and test program, truck static test

A series of tests were conducted to define the characteristics of an ASF 11 Ride Truck Assembly including joint slop, friction and stiffness. Loading to the truck assembly included vertical load to simulate the car/pool loading combined with lateral or moment loading that resulted in desired truck deflections for the various phases of testing. All seven test conditions were successfully completed with load and deflection data being collected. No attempt is made to reduce the applicable data other than to provide computer plots.

Nemes, A. G.↗
NASA NTRS1984

Locomotive Truck Dynamics

Commonly-used locomotive trucks tested to study and improve ride safety. Federal Railroad Administration and National Aeronautics and Space Administration jointly initiated program to study locomotive truck dynamics to improve operation safety. Final report summarizes program and truck and component tests.

Berry, R. L.↗
NASA NTRS1985

Aerodynamic Rear Cone for Trucks

Wind-inflated cone reduces turbulence that ordinarily occurs in air just behind square-back truck traveling at high speed. Wind around truck would enter slits in folded cone and automatically deploy it. Energy lost to air turbulence greatly reduced, and fuel consumed by truck reduced accordingly. In addition, less air turbulence means less disturbance to nearby vehicles on highway.

Bullman, J.↗
NASA NTRS1969

Fifth-wheel fork truck adapter

Standard fifth wheel mounted on a rectangular steel structure adapted for use with a fork lift truck provides a fast, safe, and economical way of maneuvering semitrailers in close quarters at plants and warehouses. One operator can move and locate a semitrailer without dismounting from a fork lift truck.

Smith, P. L.↗
NASA NTRS1980

Satellite-aided mobile communications limited operational test in the trucking industry

An experiment with NASA's ATS-6 satellite, that demonstrates the practicality of satellite-aided land mobile communications is described. Satellite communications equipment for the experiment was designed so that it would be no more expensive, when mass produced, than conventional two-way mobile radio equipment. It embodied the operational features and convenience of present day mobile radios. Vehicle antennas 75 cm tall and 2 cm in diameter provided good commercial quality signals to and from trucks and jeeps. Operational applicability and usage data were gathered by installing the radio equipment in five long-haul tractor-trailer trucks and two Air Force search and rescue jeeps. Channel occupancy rates are reported. Air Force personnel found the satellite radio system extremely valuable in their search and rescue mission during maneuvers and actual rescue operations. Propagation data is subjectively analyzed and over 4 hours of random data is categorized and graded as to signal quality on a second by second basis. Trends in different topographic regions are reported. An overall communications reliability of 93% was observed despite low satellite elevation angles ranging from 9 to 24 degrees.

Anderson, R. E.↗
NASA NTRS1981

Design and evaluation of pick-up truck mounted boom for elevation of a multiband radiometer system

Three concepts were considered for the boom design: a one-piece boom with a trolley, a folding boom, and a telescoping boom. The telescoping boom was selected over the other two concepts because of its easy manual operation. The boom is designed to mount on the bed of a pick-up truck and elevate the radiometer system 8 meters above the ground and 4 meters away from the truck. The selection of the boom components is discussed with justification of the final choice. Results of performance tests and one season's operation of the completed boom are reported.

Bauer, M. E.↗
NASA NTRS1991

CETA truck and EVA restraint system

The Crew Equipment Translation Aid (CETA) experiment is an extravehicular activity (EVA) Space Transportation System (STS) based flight experiment which will explore various modes of transporting astronauts and light equipment for Space Station Freedom (SSF). The basic elements of CETA are: (1) two 25 foot long sections of monorail, which will be EVA assembled in the STS cargo bay to become a single 50 ft. rail called the track; (2) a wheeled baseplate called the truck which rolls along the track and can accept three cart concepts; and (3) the three carts which are designated manual, electric, and mechanical. The three carts serve as the astronaut restraint and locomotive interfaces with the track. The manual cart is powered by the astronaut grasping the track's handrail and pulling himself along. The electric cart is operated by an astronaut turning a generator which powers the electric motor and drives the cart. The mechanical cart is driven by a Bendix type transmission and is similar in concept to a man-propelled railroad cart. During launch and landing, the truck is attached to the deployable track by means of EVA removable restraint bolts and held in position by a system of retractable shims. These shims are positioned on the exterior of the rail for launch and landing and rotate out of the way for the duration of the experiment. The shims are held in position by strips of Velcro nap, which rub against the sides of the shim and exert a tailored force. The amount of force required to rotate the shims was a major EVA concern, along with operational repeatability and extreme temperature effects. The restraint system was tested in a thermal-vac and vibration environment and was shown to meet all of the initial design requirements. Using design inputs from the astronauts who will perform the EVA, CETA evolved through an iterative design process and represented a cooperative effort.

Beals, David C.↗
NASA NTRS1991

Fuzzy expert systems vs. neural networks - Truck backer-upper control revisited

It is pointed out that by merging the advantages of fuzzy expert systems and neural networks one can arrive at a more powerful yet more flexible system for inferencing and learning. The advantages of fuzzy expert systems are their ability to provide nonlinear mapping through the membership functions and fuzzy rules, and the ability to deal with fuzzy information and incomplete and/or imprecise data. The merger of these two concepts is explained using the truck backer-upper control problem. Novel network architectures obtained by merging these two concepts and simulation results for the truck backer-upper problem using the architecture are shown.

Ramamoorthy, P. A.↗
NASA NTRS1993

Controlling a truck with an adaptive critic temporal difference CMAC design

In this study, CMAC (Cerebellar Model Articulated Controller) neural architectures are shown to be viable for the purposes of real-time learning and control. An adaptive critic temporal difference neurocontrol design has been implemented that learns in real-time how to back up a trailer truck along a fixed straight line trajectory. The truck backer-upper experiment is a standard performance measure in the neural network literature, but previously the training of the controllers was done off-line. With the CMAC neural architectures, it was possible to train the neurocontrollers on-line in real-time on a MS-DOS PC 386.

Shelton, Robert O.↗
NASA NTRS2008

Aerodynamics Research Revolutionizes Truck Design

During the 1970s and 1980s, researchers at Dryden Flight Research Center conducted numerous tests to refine the shape of trucks to reduce aerodynamic drag and improved efficiency. During the 1980s and 1990s, a team based at Langley Research Center explored controlling drag and the flow of air around a moving body. Aeroserve Technologies Ltd., of Ottawa, Canada, with its subsidiary, Airtab LLC, in Loveland, Colorado, applied the research from Dryden and Langley to the development of the Airtab vortex generator. Airtabs create two counter-rotating vortices to reduce wind resistance and aerodynamic drag of trucks, trailers, recreational vehicles, and many other vehicles.

Source record↗
NASA NTRS1977

Preliminary evaluation of fiber composite reinforcement of truck frame rails

The use of graphite fiber/resin matrix composite to effectively reinforce a standard steel truck frame rail is studied. A preliminary design was made and it was determined that the reinforcement weight could be reduced by a factor of 10 when compared to a steel reinforcement. A section of a 1/3 scale reinforced rail was fabricated to demonstrate low cost manufacturing techniques. The scale rail section was then tested and increased stiffness was confirmed. No evidence of composite fatigue was found after 500,000 cycles to a fiber stress of 34,000 psi. The test specimen failed in bending in a static test at a load 50 percent greater than that predicted for a non-reinforced rail.

Faddoul, J. R.↗
NASA NTRS1978

Aerodynamic design lowers truck fuel consumption

Energy-saving concepts in truck design are emerging from developing new shapes with improved aerodynamic flow properties that can reduce air-drag coefficient of conventional tractor-trailers without requiring severe design changes or compromising load-carrying capability. Improvements are expected to decrease somewhat with increased wind velocities and would be affected by factors such as terrain, driving techniques, and mechanical condition.

Steers, L.↗
NASA NTRS1978

Drag reduction obtained by modifying a standard truck

A standard two-axle truck with a box-shaped cargo compartment was tested to determine whether significant reductions in aerodynamic drag could be obtained by modifying the front of the cargo compartment. The coastdown method was used to determine the total drag of the baseline vehicle, which had a square-cornered cargo box, and of several modified configurations. Test velocities ranged from 56.3 to 94.6 kilometers per hour (35 to 60 miles per hour). At 88.5 kilometers per hour (55 miles per hour), the aerodynamic drag reductions obtained with the modified configurations ranged from 8 to 30 percent.

Sheridan, A. E.↗
NASA NTRS1978

Utilization of waste heat in trucks for increased fuel economy

Improvements in fuel economy for a broad spectrum of truck engines and waste heat utilization concepts are evaluated and compared. The engines considered are the diesel, spark ignition, gas turbine, and Stirling. The waste heat utilization concepts include preheating, regeneration, turbocharging, turbocompounding, and Rankine engine compounding. Predictions were based on fuel-air cycle analyses, computer simulation, and engine test data. The results reveal that diesel driving cycle performance can be increased by 20% through increased turbocharging, turbocompounding, and Rankine engine compounding. The Rankine engine compounding provides about three times as much improvement as turbocompounding but also costs about three times as much. Performance for either is approximately doubled if applied to an adiabatic diesel.

Leising, C. J.↗
NASA NTRS1980

Remote sensing of snow properties by passive microwave radiometry: GSFC truck experiment

Recent results indicate that microwave radiometry has the potential for inferring the snow depth and water equivalent information from snowpacks. In order to assess this potential for determining the water equivalent of a snowpack, it is necessary to understand the microwave emission and scattering behavior of the snow at various wavelengths under carefully controlled conditions. Truck-mounted microwave instrumentation was used to study the microwave characteristics of the snowpack in the Colorado Rocky Mountain region during the winters of 1977 to 78 and 7978 to 79. The spectral signatures of C, X, K sub u, and K sub a band radiometers with dual polarization were used, together with measurements of snowpack density, temperature an ram profiles, liquid water content, and rough characterization of the crystal sizes. These data compared favorably with calculated results based on recent microscopic scattering models.

Chang, A. T. C.↗