Search NASA⌕ Search

SEARCH · Search NASA

Results for “two-dimension”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Calculation of fully three-dimensional separated flow with an unsteady viscous-inviscid interaction method

Three previous papers have shown that the viscous inviscid numerical methods were capable of calculating separated turbulent flows. The 'Semi-inverse method' and the models of the first author allow the computation of massive separations, stalled flows, and shock wave-boundary layer interactions, in two-dimensional or quasi-three-dimensional conditions, from low speeds to supersonic speeds. The 'Semi-implicit' method for time-consistent coupling allows for the computation of time-accurate transonic separated flow and buffer computations in two-dimensions. The present paper shows that the viscous-inviscid interaction approach is also able to compute the fully three-dimensional flow separation phenomena. The method is based on a thin-layer approximation of the theory of 'Defect-Formulation' that provides the viscous-inviscid splitting of the Navier-Stokes equations. A parametric analytical modelling of the 3D-turbulent velocity profiles is involved. Numerically, the 3D-velocity profiles are discretized in the normal z-direction and driven by parametric integral 3D-equations in direct or inverse modes in the x-direction. The viscous-inviscid coupling is fully 3D and solved the time-consistency problem with an extension of the 'Semi-implicit' method previously suggested in two-dimensions. A 3D inviscid subroutine with TSP approximation is used. Results are obtained for transonic steady flows over wings with shock-induced transonic separation. The method provides results for highly three-dimensional flow separations, such as induced by a three-dimensional through at the wall of a flat plate. The 3D viscous-inviscid coupling and the 3D model of the velocity field provide three-dimensional instantaneous skin-friction lines whose patterns exhibit the same complex topology as Navier-Stokes solvers, with foci, nodes, and saddle-points.

Leballeur, J. C.↗
NASA NTRS1972

SIT-5 system development.

A 5-cm structurally integrated ion thruster (SIT-5) has been developed for attitude control and stationkeeping of synchronous satellites. With two-dimension thrust-vectoring grids, a first generation unit has demonstrated a thrust of 0.56 mlb at a beam voltage of 1200 V, total mass efficiency of 64%, and electrical efficiency of 46.8%. Structural integrity is demonstrated with a dielectric-coated grid for shock (30 G), sinusoidal (9 G), and random (19.9 G rms) accelerations. System envelope is 31.8 cm long by 13.9 cm flange bolt circle, with a mass of 8.5 kg, including 6.2 kg mercury propellant. Characteristics of a second-generation unit indicate significant performance gains.

Hyman, J., Jr.↗
NASA NTRS1982

Radar images of the earth from space

The operational principles and imagery available from microwave SAR radars for earth observations from aircraft, the Shuttle, and Seasat are explored. Using microwave frequencies is noted to offer imagery access in day or night, all-weather conditions. SAR radar functions by obtaining a series of reflected signals over a single path, with data processing combining the echoes into an image corresponding to what may be obtained with a large antenna. A stable, reference signal is added to the incoming signals in order to establish the phase and amplitude of echoes. Because the wavelengths of the images can be precisely controlled, Doppler shifts can be detected, thus allowing point by point scattering analysis in two-dimensions. The Shuttle SIR-A and the Seasat radar feature a ground resolution of 25 m. Applications of the satellite systems to terrain, ice mapping, and for a Venus radar mapper mission are described.

Elachi, C.↗
NASA NTRS1984

Two-dimensional computer simulation of EMVJ and grating solar cells under AMO illumination

A computer program, SCAP2D (Solar Cell Analysis Program in 2-Dimensions), is used to evaluate the Etched Multiple Vertical Junction (EMVJ) and grating solar cells. The aim is to demonstrate how SCAP2D can be used to evaluate cell designs. The cell designs studied are by no means optimal designs. The SCAP2D program solves the three coupled, nonlinear partial differential equations, Poisson's Equation and the hole and electron continuity equations, simultaneously in two-dimensions using finite differences to discretize the equations and Newton's Method to linearize them. The variables solved for are the electrostatic potential and the hole and electron concentrations. Each linear system of equations is solved directly by Gaussian Elimination. Convergence of the Newton Iteration is assumed when the largest correction to the electrostatic potential or hole or electron quasi-potential is less than some predetermined error. A typical problem involves 2000 nodes with a Jacobi matrix of order 6000 and a bandwidth of 243.

Gray, J. L.↗
NASA NTRS1984

Implicit treatment of the unsteady full potential equation in conservation form

An implicit, conservative treatment for the unsteady full potential equation in two-dimensions is presented. The method employs a local time linearization for density, and introduces flux biasing concepts based on sonic conditions for the generation of artificial viscosity to capture shocks without any overshoots. The boundary condition is treated implicitly using a splitting procedure consistent with the approximate factorization scheme. This allows for extremely large Courant numbers, even for nonorthogonal grid at the body. The method has application not only to unsteady problems, but also to generate the starting blunt body solution for a supersonic full potential marching code. Results are presented for flows over cylinders, spheres and airfoils. Comparisons are made with available Euler and full potential results, and are in excellent agreement.

Shankar, V.↗
NASA NTRS1982

Random element method for numerical modeling of diffusional processes

The random element method is a generalization of the random vortex method that was developed for the numerical modeling of momentum transport processes as expressed in terms of the Navier-Stokes equations. The method is based on the concept that random walk, as exemplified by Brownian motion, is the stochastic manifestation of diffusional processes. The algorithm based on this method is grid-free and does not require the diffusion equation to be discritized over a mesh, it is thus devoid of numerical diffusion associated with finite difference methods. Moreover, the algorithm is self-adaptive in space and explicit in time, resulting in an improved numerical resolution of gradients as well as a simple and efficient computational procedure. The method is applied here to an assortment of problems of diffusion of momentum and energy in one-dimension as well as heat conduction in two-dimensions in order to assess its validity and accuracy. The numerical solutions obtained are found to be in good agreement with exact solution except for a statistical error introduced by using a finite number of elements, the error can be reduced by increasing the number of elements or by using ensemble averaging over a number of solutions.

Ghoniem, A. F.↗
NASA NTRS1985

Current evolution in a numerical emerging-magnetic-flux model

The resistive-MHD equations are numerically solved in two-dimensions for an initial-boundary-value problem which models the emergence of magnetic flux from the photosphere into the corona. As the emergence begins a current sheet forms around the emerging region which separates the emerging region from the overlying coronal magnetic field. This current sheet is the source of the free-magnetic energy in the system, and in the limit of zero resistivity it is a simple tangential discontinuity. However, when the resistivity is finite, reconnection between the magnetic field in the emerging region and the overlying coronal magnetic field ensures, and the subsequent evolution of the enveloping current sheet becomes complex. The overall time history of the current evolution is suggestive of the expected current evolution for the pre-flare, impulsive, and main phases of flares.

Forbes, T.↗
NASA NTRS1985

An efficient iteration strategy for the solution of the Euler equations

A line Gauss-Seidel (LGS) relaxation algorithm in conjunction with a one-parameter family of upwind discretizations of the Euler equations in two-dimensions is described. The basic algorithm has the property that convergence to the steady-state is quadratic for fully supersonic flows and linear otherwise. This is in contrast to the block ADI methods (either central or upwind differenced) and the upwind biased relaxation schemes, all of which converge linearly, independent of the flow regime. Moreover, the algorithm presented here is easily enhanced to detect regions of subsonic flow embedded in supersonic flow. This allows marching by lines in the supersonic regions, converging each line quadratically, and iterating in the subsonic regions, thus yielding a very efficient iteration strategy. Numerical results are presented for two-dimensional supersonic and transonic flows containing both oblique and normal shock waves which confirm the efficiency of the iteration strategy.

Walters, R. W.↗
NASA NTRS1986

A feasibility study on the numerical modeling of interior noise fields

New developments in electronics and computer control have made active methods of noise suppression feasible. To date, however, active methods of noise control have been applied principally in geometrically uniform spaces with localized sound sources. The purpose of this paper is to demonstrate how finite element techniques may be used to model sound fields and active control inside geometrically complex spaces with non-uniform acoustic boundaries and multiple spatially separated sources. A closed-form solution is derived for the case of a one-dimensional tube with a vibrating piston at each end. Results are compared with finite element solutions and the problem is then generalized to two-dimensions with non-uniform geometry and non-uniform acoustic boundaries.

Abrahamson, A. L.↗
NASA NTRS1987

Time dependent boundary conditions for hyperbolic systems

Nonreflecting boundary conditions are defined for multidimensional fluid dynamics problems where waves enter and leave the interior of a domain modeled by hyperbolic equations. Separate equations are defined for each type of incoming and outgoing wave. Temporally varying problems are considered in terms of a nonreflecting boundary condition which permit the amplitude of incoming waves to remain constant over time. Conservative expressions are presented that include dissipative terms. Applications of the computational techniques are illustrated with sample results for a traveling shock wave, a shock tube, a spherical explosion and expansion problems on one- and two-dimensions.

Thompson, Kevin W.↗
NASA NTRS1988

The use of direct solvers for compressible flow computations

The feasibility of using a vectorized direct solver for the compressible Euler and Navier-Stokes equations is examined for both single-grid and multi-grid strategies. A procedure is developed for comparing the computational effort required for the direct method with that of the vertical line Gauss-Seidel iteration scheme in order to provide a criteria for choosing between the two techniques. The direct method is shown to have a relatively wide range of application on a vector processor with large memory. Results for both inviscid and viscous test problems in two-dimensions are examined.

Riggins, David↗
NASA NTRS1989

Multi-blade Navier-Stokes simulations of rotor-stator interaction in a turbine stage

Turbulent flow fields of multiblade rotor/stator configurations in a turbine stage for the high pressure fuel side turbopump of the space shuttle main engine are obtained using a computer program that can simulate flows in a stage with an unequal number of rotor and stator blades. The calculations are performed on a system of multiple patched and overlaid grids using the unsteady, thin-layer Navier-Stokes equations in two-dimension. Aerodynamic performance of two rotor/stator configurations are studied and compared in the form of pressure contours, Mach number contours, time averaged surface pressure, and unsteady pressure amplitude. Spatial and temporal accuracy of flow calculations along with computation cost are evaluated for the purpose of engineering design applications.

Lin, S. J.↗
NASA NTRS1989

An iterative method for systems of nonlinear hyperbolic equations

An iterative algorithm for the efficient solution of systems of nonlinear hyperbolic equations is presented. Parallelism is evident at several levels. In the formation of the iteration, the equations are decoupled, thereby providing large grain parallelism. Parallelism may also be exploited within the solves for each equation. Convergence of the interation is established via a bounding function argument. Experimental results in two-dimensions are presented.

Scroggs, Jeffrey S.↗
NASA NTRS1990

Algebraic grid generation with boundary orthogonality control

This paper presents a new approach in applying the blending function method to the generation of structured finite-difference meshes. It is shown that the surface equation developed by Coons (1967) can be easily adapted to generate two-dimensional meshes, and its extension to hyperspace allows the construction of three-dimensional meshes. The robust method in its basic form blends among the boundary curves/surfaces conforming to their intrinsic slopes. When parameter-controlled boundary-slope corrections are introduced, it is possible to establish varying degrees of orthogonality along the boundaries. Additional controls are made possible by moving points in the parameter space, which affects the movement of points in the physical space. The combination of these controls provides a simple and yet powerful means for exploiting the blending-function method to satisfy the needs of practical CFD applications. Results from a validation program for two-dimensions are shown for a variety of geometries.

Luh, Raymond Ching-Chung↗
NASA NTRS1990

Computation of turbine flowfields with a Navier-Stokes code

A new technique has been developed for the solution of the incompressible Navier-Stokes equations. The numerical technique, derived from a pressure substitution method (PSM), overcomes many of the deficiencies of the pressure crrection method. This technique allows for the direct solution of the actual pressure in the form of a Poisson equation which is derived from the pressure weighted substitution of the full momentum equations into the continuity equation. In two-dimensions a turbine flowfield, including heat transfer, has been computed with this method and the prediction of the cascade performance is presented. The extension of the pressure correction method for the solution of three-dimensional flows is also presented for laminar flow in an S-shaped duct and turbulent flow in the end-wall region of a turbine cascade.

Hobson, G. V.↗
NASA NTRS1990

A parallel algorithm for nonlinear convection-diffusion equations

A parallel algorithm for the efficient solution of nonlinear time-dependent convection-diffusion equations with small parameter on the diffusion term is presented. The method is based on a physically motivated domain decomposition that is dictated by singular perturbation analysis. The analysis is used to determine regions where certain reduced equations may be solved in place of the full equation. The method is suitable for the solution of problems arising in the simulation of fluid dynamics. Experimental results for a nonlinear equation in two-dimensions are presented.

Scroggs, Jeffrey S.↗
NASA NTRS1990

Automated domain decomposition for computational fluid dynamics

Automation of flow-field zoning in two-dimensions is an important step towards easing the three-dimensional grid generation bottleneck in computational fluid dynamics. A knowledge-based approach works well, but several aspects of flow-field zoning make the use of such an approach challenging. A proposed model and language to describe the process of zoning a flow field are presented, followed by a discussion of the implementation of EZGrid, a knowledge-based two-dimensional (2-D) flow-field zoner. Results are shown for representative two-dimensional aerodynamic configurations. Finally, an approach to the evaluation of flow-field zonings is described and used to compare the performance of EZGrid with that of a human expert.

Vogel, Alison Andrews↗
NASA NTRS1990

Three-dimensional potential flows from functions of a 3D complex variable

Potential, or ideal, flow velocities can be found from the gradient of an harmonic function. An ordinary complex valued analytic function can be written as the sum of two real valued functions, both of which are harmonic. Thus, 2D complex valued functions serve as a source of functions that describe two-dimensional potential flows. However, this use of complex variables has been limited to two-dimensions. Recently, a new system of three-dimensional complex variables has been developed at the NASA Ames Research Center. As a step toward application of this theory to the analysis of 3D potential flow, several functions of a three-dimensional complex variable have been investigated. The results for two such functions, the 3D exponential and 3D logarithm, are presented in this paper. Potential flows found from these functions are investigated. Important characteristics of these flows fields are noted.

Kelly, Patrick↗