Search NASA⌕ Search

SEARCH · Search NASA

Results for “type 5”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Compressional ULF waves in the outer magnetosphere. 2: A case study of Pc 5 type wave activity

In previously published work (Zhu and Kivelson, 1991) the spatial distribution of compressional magnetic pulsations of period 2 - 20 min in the outer magnetosphere was described. In this companion paper, we study some specific compressional events within our data set, seeking to determine the structure of the waves and identifying the wave generation mechanism. We use both the magnetic field and three-dimensional plasma data observed by the International Sun-Earth Explorer (ISEE) 1 and/or 2 spacecraft to characterize eight compressional ultra low frequency (ULF) wave events with frequencies below 8 mHz in the outer magnetosphere. High time resolution plasma data for the event of July 24, 1978, made possible a detailed analysis of the waves. Wave properties specific to the event of July 24, 1978, can be summarized as follows: (1) Partial plasma pressures in the different energy ranges responded to the magnetic field pressure differently. In the low-energy range they oscillated in phase with the magnetic pressure, while oscillations in higher-energy ranges were out-of-phase; (2) Perpendicular wavelengths for the event were determined to be 60,000 and 30,000 km in the radial and azimuthal directions, respectively. Wave properties common to all events can be summarized as follows: (1) Compressional Pc 5 wave activity is correlated with Beta, the ratio of the plasma pressure to the magnetic pressure; the absolute magnitude of the plasma pressure plays a minor role for the wave activity; (2) The magnetic equator is a node of the compressional perturbation of the magnetic field; (3) The criterion for the mirror mode instability is often satisfied near the equator in the outer magnetosphere when the compressional waves are present. We believe these waves are generated by internal magnetohydrodynamic (MHD) instabilities.

Zhu, Xiaoming↗
NASA NTRS2004

Structural Basis for the Catalytic Activity of Human Serine/Threonine Protein Phosphatase type 5 (PP5)

Serine/threonine protein phosphatase-5 (PP5) is a member of the PPP-gene family of protein phosphatases that is widely expressed in mammalian tissues and is highly conserved among eukaryotes. PP5 associates with several proteins that affect signal transduction networks, including the glucocorticoid receptor (GR)-heat shock protein-90 (Hsp90)-heterocomplex, the CDC16 and CDC27 subunits of the anaphase-promoting complex, elF2alpha kinase, the A subunit of PP2A, the G12-alpha / G13-alpha subunits of heterotrimeric G proteins and DNA-PK. The catalytic domain of PP5 (PP5c) shares 35-45% sequence identity with the catalytic domains of other PPP-phosphatases, including protein phosphatase-1 (PP1), -2A (PP2A), -2B / calcineurin (PP2B), -4 (PP4), -6 (PP6), and -7 (PP7). Like PP1, PP2A and PP4, PP5 is also sensitive to inhibition by okadaic acid, microcystin, cantharidin, tautomycin, and calyculin A. Here we report the crystal structure of the PP5 catalytic domain (PP5c) at a resolution of 1.6 angstroms. From this structure we propose a mechanism for PP5-mediated hydrolysis of phosphoprotein substrates, which requires the precise positioning of two metal ions within a conserved Asp(sup 271)-M(sub 1):M(sub 2)-W(sup 1)-His(sup 304)-Asp(sup 274) catalytic motif. The structure of PP5c provides a possible structural basis for explaining the exceptional catalytic proficiency of protein phosphatases, which are among the most powerful known catalysts. Resolution of the entire C-terminus revealed a novel subdomain, and the structure of the PP5c should also aid development of type-specific inhibitors.

Swingle, Mark R.↗
NASA NTRS1972

Oxygen isotope temperatures of 'equilibrated' ordinary chondrites.

Measurements have been made of O-18/O-16 ratios of coexisting minerals (plagioclase, pyroxene, olivine) from nine ordinary chondrites. The O-18 content of a given mineral increases systematically from H through L to LL group. Isotope fractionations for mineral pairs fall on a concordancy line, suggesting that these minerals were crystallized in oxygen isotope equilibrium. The isotopic temperature is estimated to be 950 (plus or minus 100) C for seven of the type 5 and type 6 chondrites.

Onuma, N.↗
NASA NTRS1972

Manufacture and quality control of interconnecting wire hardnesses, Volume 1

A standard is presented for manufacture, installation, and quality control of eight types of interconnecting wire harnesses. The processes, process controls, and inspection and test requirements reflected are based on acknowledgment of harness design requirements, acknowledgment of harness installation requirements, identification of the various parts, materials, etc., utilized in harness manufacture, and formulation of a typical manufacturing flow diagram for identification of each manufacturing and quality control process, operation, inspection, and test. The document covers interconnecting wire harnesses defined in the design standard, including type 1, enclosed in fluorocarbon elastomer convolute, tubing; type 2, enclosed in TFE convolute tubing lines with fiberglass braid; type 3, enclosed in TFE convolute tubing; and type 5, combination of types 3 and 4. Knowledge gained through experience on the Saturn 5 program coupled with recent advances in techniques, materials, and processes was incorporated.

Source record↗
NASA NTRS2001

Thermographic Data Analyses for Karst Watersheds

Aerial thermography is an emerging technology unsurpassed for locating groundwater discharges. Thermography can be used to locate submerged discharges that are extremely difficult to find by other means. In two large projects, thermography was used to identify almost every significant spring at sites underlain by karst aquifers. This technology effectively converts Brown's Type 5 topology to types 1 or 2 (all discharges known), which has a significant impact on dye tracing. At a north Alabama site, springs located by thermography quadrupled the known groundwater discharge in and around the site. For submerged discharges, thermographic temperatures can be measured down the center of the groundwater plume that rises to the surface in the winter. Using the Cornell Mixing (CORMIX) model, flow rate for one submerged spring was estimated. Once identified, estimates of spring recharge area were desired. The size of the area of recharge was estimated by hydrograph separation of flow data from nearby, unregulated surface streams. Monthly recharge estimates were also made and used to show that in north Alabama the mean annual recharge/discharge occurs during May and December. Spring flow measurements for the same county of north Alabama were averaged to obtain mean flows. Then measurements for May only, were averaged. The two averages usually agreed to within 20 percent. This provides evidence that hydrograph separation determinations of recharge are valid.

Campbell, C. Warren↗
NASA NTRS1993

Pyroxene equilibration temperatures in metamorphosed ordinary chondrites

Ordinary chondrites are divided into petrographic types based on observed mineralogical and textural properties consistent with progressive thermal metamorphism from low grade (type 3) to high (type 7). Regardless of the exact cause of the metamorphism, higher-type chondrites should retain information concerning peak temperatures reached and for what duration. Using the two-pyroxene geothermometer of Lindsley, we have calculated the equilibration temperatures for 26H, L and LL type 5 and 6 ordinary chondrites, to investigate the relative peak temperatures and equilibration-states reached by these various meteorite classes. The Lindsley thermometer relies on a detailed accounting of non-quadrilateral components in pyroxenes, whose recalculated compositions are then plotted onto an empirically-derived polythermal diagram from which temperatures can be interpolated. The reported uncertainty of this method is plus or minus 50 C; in addition, close spacing of isotherms on the graph (particularly for orthopyroxene compositions) increase this uncertainty. We have parameterized the Lindsley polythermal quadrilateral for 1 atm pressure (less than 2 bar), and interpreted recalculated coordinates directly in terms of 25 C temperature intervals. Meteorites selected for this study include both relatively shocked and unshoked specimens; heavily weathered or visibly brecciated specimens were avoided. Temperatures were calculated from orthopyroxene (opx) and clinopyroxene (cpx) analyses within one relative percent of ideal sums and stoichiometry. Histograms summarizing the calculated temperatures for type 5 and 6 ordinary chondrites are shown.

Harvey, R. P.↗
NASA NTRS1973

The position and size of radio sources associated with solar electron events

The positions and sizes of the sources of type 3 bursts which are associated with interplanetary electron events ( 45 keV) are observed by the 80-MHz Culgoora radioheliograph. The sizes of the responsible electron streams at 0.6 solar radius in the corona are much smaller than the cones of propagation of the electrons in interplanetary space. Many of the type 3 bursts are shown to be accompanied by a type 5 continuum, and it is argued that the observation of a type 3 to 5 radio burst implies an increased spreading of electrons at heights 0.6 solar radius, consistent with the extent of the propagation cone of the electrons in interplanetary space.

Palmer, I. D.↗
NASA NTRS1993

High temperature composite analyzer (HITCAN) user's manual, version 1.0

This manual describes 'how-to-use' the computer code, HITCAN (HIgh Temperature Composite ANalyzer). HITCAN is a general purpose computer program for predicting nonlinear global structural and local stress-strain response of arbitrarily oriented, multilayered high temperature metal matrix composite structures. This code combines composite mechanics and laminate theory with an internal data base for material properties of the constituents (matrix, fiber and interphase). The thermo-mechanical properties of the constituents are considered to be nonlinearly dependent on several parameters including temperature, stress and stress rate. The computation procedure for the analysis of the composite structures uses the finite element method. HITCAN is written in FORTRAN 77 computer language and at present has been configured and executed on the NASA Lewis Research Center CRAY XMP and YMP computers. This manual describes HlTCAN's capabilities and limitations followed by input/execution/output descriptions and example problems. The input is described in detail including (1) geometry modeling, (2) types of finite elements, (3) types of analysis, (4) material data, (5) types of loading, (6) boundary conditions, (7) output control, (8) program options, and (9) data bank.

Lackney, J. J.↗
NASA NTRS1971

CRT image recording evaluation

Performance capabilities and limitations of a fiber optic coupled line scan CRT image recording system were investigated. The test program evaluated the following components: (1). P31 phosphor CRT with EMA faceplate; (2). P31 phosphor CRT with clear clad faceplate; (3). Type 7743 semi-gloss dry process positive print paper; (4). Type 777 flat finish dry process positive print paper; (5). Type 7842 dry process positive film; and (6). Type 1971 semi-gloss wet process positive print paper. Detailed test procedures used in each test are provided along with a description of each test, the test data, and an analysis of the results.

Source record↗
NASA NTRS1991

Composition of chondrule silicates in LL3-5 chondrites and implications for their nebular history and parent body metamorphism

The composition of 75 type-IA and type-II porphyritic olivine chondrules from nine LL type 3 to type 5 chondrites was determined and was compared with that of chondrules from the Semarkona type 3.0 meteorite. Chemical data for silicates in the LL3.3-5 chondrites indicated that porphyritic olivine chondrules in these chondrites could be derived from chondrules similar to those from the Semarkona LL3.0, the least metamorphosed one of the known LL chondrites. It is shown that the chemical trends defined by the minerals of type-IA and type-II chondrules can be satisfactorily accounted for by the process of solid-state diffusive equilibration between minerals in chondrules and the opaque matrix rather than by changes in conditions during chondrule crystallization.

Mccoy, Timothy J.↗
NASA NTRS2006

Chromite-Plagioclase Assemblages as a New Shock Indicator; Implications for the Shock and Thermal Histories of Ordinary Chondrites

Chromite in ordinary chondrites (OC) can be used as a shock indicator. A survey of 76 equilibrated H, L and LL chondrites shows that unshocked chromite grains occur in equant, subhedral and rounded morphologies surrounded by silicate or intergrown with metallic Fe-Ni and/or troilite. Some unmelted chromite grains are fractured or crushed during whole-rock brecciation. Others are transected by opaque veins; the veins form when impacts cause localized heating of metal-troilite intergrowths above the Fe-FeS eutectic (988 C), mobilization of metal-troilite melts, and penetration of the melt into fractures in chromite grains. Chromite-plagioclase assemblages occur in nearly every shock-stage S3-S6 OC; the assemblages range in size from 20-300 microns and consist of 0.2-20-micron-size euhedral, subhedral, anhedral and rounded chromite grains surrounded by plagioclase or glass of plagioclase composition. Plagioclase has a low impedance to shock compression. Heat from shock-melted plagioclase caused adjacent chromite grains to melt; chromite grains crystallized from this melt. Those chromite grains in the assemblages that are completely surrounded by plagioclase are generally richer in Al2O3, than unmelted, matrix chromite grains in the same meteorite. Chromite veinlets (typically 0.5-2 microns thick and 10-300 microns long) occur typically in the vicinity of chromite-plagioclase assemblages. The veinlets formed from chromite-plagioclase melts that were injected into fractures in neighboring silicate grains; chromite crystallized in the fractures and the residual plagioclase-rich melt continued to flow, eventually pooling to form plagioclase-rich melt pockets. Chromite-rich chondrules (consisting mainly of olivine, plagioclase-normative mesostasis, and 5-15 vol.% chromite) occur in many shocked OC and OC regolith breccias but they are absent from primitive type-3 OC. They may have formed by impact melting chromite, plagioclase and adjacent mafic silicates during higher-energy shock events. The melt was jetted from the impact site and formed droplets due to surface tension. Crystallization of these droplets may have commenced in flight, prior to landing on the parent-body surface. Chromite-plagioclase assemblages and chromite veinlets occur in 25 out of 25 shock-stage S1 OC of petrologic type 5 and 6 that I examined. Although these rocks contain unstrained olivine with sharp optical extinction, most possess other shock indicators such as extensive silicate darkening, numerous occurrences of metallic Cu, polycrystalline troilite, and opaque veins. It seems likely that these rocks were shocked to levels at least as high as shock-stage S3 and then annealed by heat generated during the shock event. During annealing, the olivine crystal lattices healed but other shock indicators survived. Published Ar-Ar age data for some SI OC indicate that many shock and annealing events occurred very early in the history of the parent asteroids. The common occurrence of shocked and annealed OC is consistent with collisions being a major mechanism responsible for metamorphosing OC.

Rubin, Alan E.↗
NASA NTRS1984

Al-rich objects in ordinary chondrites - Related origin of carbonaceous and ordinary chondrites and their constituents

A description is given of 169 Al-rich objects (arbitrarily defined as having 10 wt pct or more of Al2O3) from 24 ordinary chondrites of types 3 and 4, five regolith breccias containing unequilibrated material, the unique meteorite Kakangari, and a few ordinary chondrites of types 5 and 6. On the basis of shape and texture, the Al-rich objects are divided into chondrules (round, with igneous textures), irregularly shaped inclusions (similar to type F and spinel-rich complex Ca-Al-rich inclusions), and fragments (probably fragments of Al-rich chondrules and inclusions). For descriptive purposes, the Al-rich chondrules are further subdivided into compositional subgroups, although they are entirely transitional.

Bischoff, A.↗
NASA NTRS1985

Boron cosmochemistry

The abundances of boron, silicon, sulfur, and sodium were determined in 50 pieces of 28 chondritic meteorites. Boron abundances are found to define compositionally distinct domains within type C2M carbonaceous chondrites and petrologic type 5 and 6 ordinary chondrites. These domains may manifest the redistribution of boron within meteorites in response to low-temperature hydrous processes in C2M chondrites and high-temperature metamorphic processes in high petrologic type ordinary chondrites. Assuming that the redistribution was limited to regions comparable in size to the mass of the available meteorites, the boron abundance in unaltered material is determined. The depletion factors for boron in chondritic subgroups correlate with those for sulfur in the same subgroups. This correlation indicates that boron, like sulfur, is a moderately volatile element with a condensation temperature between 400 and 900 K.

Curtis, D. B.↗
NASA NTRS2003

Objective Classification of Radar Profile Types, and Their Relationship to Lightning Occurrence

A cluster analysis technique is used to identify 16 "archetypal" vertical radar profile types from a large, globally representative sample of profiles from the TRMM Precipitation Radar. These include nine convective types (7 of these deep convective) and seven stratiform types (5 of these clearly glaciated). Radar profile classification provides an alternative to conventional deep convective storm metrics, such as 30 dBZ echo height, maximum reflectivity or VIL. As expected, the global frequency of occurrence of deep convective profile types matches satellite-observed total lightning production, including to very small scall local features. Each location's "mix" of profile types provides an objective description of the local convective spectrum, and in turn, is a first step in objectively classifying convective regimes. These classifiers are tested as inputs to a neural network which attempts to predict lightning occurrence based on radar-only storm observations, and performance is compared with networks using traditional radar metrics as inputs.

Boccippio, Dennis↗
NASA NTRS1972

The usefullness of ERTS-1 and supporting aircraft data for monitoring plant development in rangeland environments

The author has identified the following significant results. Preliminary analysis of ERTS-1 MSS imagery of annual and perennial rangeland in California yields the following observations: (1) Sufficient geomorphological detail can be resolved to differentiate upland and bottomland range sites in the foothill range areas. (2) Dry and green meadowland can be differentiated on MSS band 5. (3) Color composites prepared by NASA-Goddard were useful for locating perennial rangeland with varying amounts of herbaceous ground cover. (4) The ERTS-1 images received and interpreted cover nearly 50% of the state of California and show nearly two-thirds of the annual grassland type. (5) Satellite imagery obtained during the late summer season should be optimum for differentiating grassland from brushland and forested land. (6) The ERTS-1 imagery clearly shows areas which at one time were part of the annual grassland but which are now used for dry land farming (cropping of cereal grains). Similarly, the imagery show areas which have been converted from brushland to grassland.

Carneggie, D. M.↗
NASA NTRS1986

Incipient fault detection study for advanced spacecraft systems

A feasibility study to investigate the application of vibration monitoring to the rotating machinery of planned NASA advanced spacecraft components is described. Factors investigated include: (1) special problems associated with small, high RPM machines; (2) application across multiple component types; (3) microgravity; (4) multiple fault types; (5) eight different analysis techniques including signature analysis, high frequency demodulation, cepstrum, clustering, amplitude analysis, and pattern recognition are compared; and (6) small sample statistical analysis is used to compare performance by computation of probability of detection and false alarm for an ensemble of repeated baseline and faulted tests. Both detection and classification performance are quantified. Vibration monitoring is shown to be an effective means of detecting the most important problem types for small, high RPM fans and pumps typical of those planned for the advanced spacecraft. A preliminary monitoring system design and implementation plan is presented.

Milner, G. Martin↗
NASA NTRS1991

Coastal lithofacies and biofacies associated with syndepositional dolomitization and silicification (Draken Formation, Upper Riphean, Svalbard)

The Draken Formation (120-250 m) of northeast Spitsbergen (Svalbard) forms part of a thick Upper Proterozoic carbonate platform succession. It consists predominantly of intraformational dolomitic conglomerates, with excellent textural preservation. Six main lithofacies were recognized in the field: quartz sandstones, stromatolitic mats, conglomerates with silicified intraclasts, dolostone conglomerates with desiccated mudrocks, oolitic/pisolitic grainstones and fenestral dolostones. A series of five main gradational biofacies were recognized from silicified (and rare calcified) microfossils. Biofacies 1 represents low-energy subtidal benthos (erect filaments) and plankton (acritarchs and vase-shaped microfossils) whereas biofacies 2 to 5 are microbial mat assemblages (with filamentous mat-builders, and associated dwellers and washed-in plankton) ranging from basal intertidal to high intertidal/supratidal. Colour values (a measure of the lightness of the colour shade) of sawn rock samples were quantified using a Munsell chart, and exhibit a pronounced variation (means of major groups varying from 4.0 to 5.95) across the spectrum of subtidal to supratidal sediments as inferred from other criteria. The lightening in progressively more exposed sediments is related to lowering of organic carbon contents, probably mainly by oxidation. Six types of early cement have been recognized. Calcite microspar (type 1) is common as a subtidal cement in many Proterozoic formations, whereas types 2 (subtidal isopachous fringes), 3 (subtidal hardground dolomicrite) and 4 (intertidal meniscus dolomicrite) are very similar to Phanerozoic examples except for their dolomitic mineralogy. Types 5 and 6 are complex and variable dolomite growths associated with expansion and replacive phenomena. They characterize the fenestral lithofacies and compare with modern supratidal cements. Consideration of diagenetic fabrics and truncation textures of intraclasts indicates that leaching, dolomitization, silicification were all significant syndepositional processes altering the original metastable carbonates. The data set provides evidence for a spectrum of peritidal environments including ooid shoals, protected subtidal, tidal sandflats and protected carbonate mudflats. Different sections show a preponderance of particular facies. The coastal lithofacies continuum was completely dolomitized, unlike offshore to ooid shoal facies of adjacent formations. Dolomitization thus bears a relationship to depositional bathymetry. Although hydrodynamics clearly have a role, the potential importance of whiting precipitation in raising Mg/Ca in marginal marine environments is also stressed.

Non-NASA Center↗
NASA NTRS1981

Experimental study of the interaction between the wing of a subsonic aircraft and a nacelle of a high by-pass ratio engine

The oncoming of a new generation of subsonic transport aircraft (with supercritical wing and high by-pass ratio turbofans) led to an experimental study of wing nacelle jet pylon interference in transonic flow. To this end, a test set-up was developed at the ONERA S3Ch wind tunnel. The nacelle models represent a turbofan by means of two compressed air jets. The scale is 1/18.5. The nacelles are fixed on a thrust balance measuring afterbody thrust and discharge coefficients. The wing is located between the sidewalls of the test section. Pressures are measured through 456 holes located on 8 airfoils. Drag coefficient of the wing is obtained by wake survey. The following parameters can vary (1) wing/nacelle position; (2) upstream Mach number (from 0.3 to 0.8); (3) jet pressure ratio; (4) with/without pylon and (5) type of nacelle. Wing nacelle interference can be studied by means of total thrust drag analysis as a functon of the various parameters. The test set-up is described and examples of results are presented.

Levart, P.↗