Search NASA⌕ Search

SEARCH · Search NASA

Results for “ultraviolet (UV) model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Leptonic scalars and collider signatures in a UV-complete model

We study the non-standard interactions of neutrinos with light leptonic scalars ( ϕ ) in a global ( B – L )-conserved ultraviolet (UV)-complete model. The model utilizes Type-II seesaw motivated neutrino interactions with an SU(2) L -triplet scalar, along with an additional singlet in the scalar sector. This UV-completion leads to an enriched spectrum and consequently new observable signatures. We examine the low-energy lepton flavor violation constraints, as well as the perturbativity and unitarity constraints on the model parameters. Then we lay out a search strategy for the unique signature of the model resulting from the leptonic scalars at the hadron colliders via the processes H ±± → W ± W ± ϕ and H ± → W ± ϕ for both small and large leptonic Yukawa coupling cases. We find that via these associated production processes at the HL-LHC, the prospects of doubly-charged scalar H ±± can reach up to 800 (500) GeV and 1.1 (0.8) TeV at the 2 σ (5 σ ) significance for small and large Yukawa couplings, respectively. A future 100 TeV hadron collider will further increase the mass reaches up to 3.8 (2.6) TeV and 4 (2.7) TeV, at the 2 σ (5 σ ) significance, respectively. We also demonstrate that the mass of ϕ can be determined at about 10% accuracy at the LHC for the large Yukawa coupling case even though it escapes as missing energy from the detectors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Do quasar X-ray and UV flux measurements provide a useful test of cosmological models?

ABSTRACT The recent compilation of quasar (QSO) X-ray and ultraviolet (UV) flux measurements include QSOs that appear to not be standardizable via the X-ray luminosity and UV luminosity (LX–LUV) relation and so should not be used to constrain cosmological model parameters. Here, we show that the largest of seven sub-samples in this compilation, the SDSS-4XMM QSOs that contribute about 2/3 of the total QSOs, have LX–LUV relations that depend on the cosmological model assumed and also on redshift, and is the main cause of the similar problem discovered earlier for the full QSO compilation. The second and third biggest sub-samples, the SDSS-Chandra and XXL QSOs that together contribute about 30 per cent of the total QSOs, appear standardizable, but provide only weak constraints on cosmological parameters that are not inconsistent with the standard spatially flat ΛCDM model or with constraints from better-established cosmological probes.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Quasi-periodic X-ray eruptions years after a nearby tidal disruption event

Abstract Quasi-periodic eruptions (QPEs) are luminous bursts of soft X-rays from the nuclei of galaxies, repeating on timescales of hours to weeks 1–5 . The mechanism behind these rare systems is uncertain, but most theories involve accretion disks around supermassive black holes (SMBHs) undergoing instabilities 6–8 or interacting with a stellar object in a close orbit 9–11 . It has been suggested that this disk could be created when the SMBH disrupts a passing star 8,11 , implying that many QPEs should be preceded by observable tidal disruption events (TDEs). Two known QPE sources show long-term decays in quiescent luminosity consistent with TDEs 4,12 and two observed TDEs have exhibited X-ray flares consistent with individual eruptions 13,14 . TDEs and QPEs also occur preferentially in similar galaxies 15 . However, no confirmed repeating QPEs have been associated with a spectroscopically confirmed TDE or an optical TDE observed at peak brightness. Here we report the detection of nine X-ray QPEs with a mean recurrence time of approximately 48 h from AT2019qiz, a nearby and extensively studied optically selected TDE 16 . We detect and model the X-ray, ultraviolet (UV) and optical emission from the accretion disk and show that an orbiting body colliding with this disk provides a plausible explanation for the QPEs.

Science & Technology - Other Topics↗
DOE OSTI2020

Pre-Ionization Controlled Laser Plasma Formation for Ignition Applications (Final Scientific/Technical Report)

This report consists of three grand funded papers. Abstracts for each follow. 1) In this work, we present experimental and modeling studies of air pre-ionization using ultraviolet (UV) laser pulses and its effect on laser breakdown of an overlapped near-infrared (NIR) pulse. Experimental studies are conducted with a 266 nm beam (fourth harmonic of Nd:YAG) for UV pre-ionization and an overlapped 1064 nm NIR beam (fundamental of Nd:YAG), both having pulse duration of 10 ns. Results show that the UV beam produces a pre-ionized volume which assists in breakdown of the NIR beam, leading to reduction in NIR breakdown threshold by factor of >2. Numerical modeling is performed to examine the ionization and breakdown of both beams. The modeled breakdown threshold of the NIR, including assist by pre-ionization, is in reasonable agreement with the experimental results. 2) The present contribution compares the energy absorption, optical emission, temperature, and fluid dynamics of ultraviolet (UV) λ = 266 nm and near infrared (NIR) λ = 1064 nm nanosecond laser induced plasmas in ambient air. For UV pulses at the conditions studied, energy absorption by the plasmas increases relatively gradually with laser pulse energy starting at delivered energy of E~8 mJ. Corresponding measurements of plasma luminosity show that the absorption of UV radiation does not necessarily result in visible plasma emission. For the NIR induced plasmas, the energy absorption profile is far more abrupt and begins at ~55 mJ. In contrast with UV, the absorption of NIR radiation is always accompanied by intense optical emission. The temperatures of both types of plasma have been measured with Rayleigh scattering thermometry (at times after the Thomson signal sufficiently diminishes). The UV plasmas can attain a wider range of temperatures, including lower temperatures, depending on the pulse energy (e.g., T ~400–2000K for E ~7–35 mJ at Δt = 10 μs after the pulse) while the NIR plasmas show only hotter temperatures (e.g., T ~ 12 000 K for E = 75 mJ at Δt = 10 μs after the pulse) as is consistent with the literature. Differences in the fluid dynamics for UV versus NIR pulses are shown with Schlieren imaging. In this work, the contrast in the UV and NIR plasma threshold behavior is attributed to differing roles of avalanche ionization and multiphoton ionization as is also illustrated by a simple numerical model. 3) The present contribution examines the impact of plasma dynamics and plasma-driven fluid dynamics on the flame growth of laser ignited mixtures and shows that a new dual-pulse scheme can be used to control the kernel formation process in ways that extend the lean ignition limit. We perform a comparative study between (conventional) single-pulse laser ignition (λ = 1064 nm) and a novel dual-pulse method based on combining an ultraviolet (UV) pre-ionization pulse (λ = 266 nm) with an overlapped near-infrared (NIR) energy addition pulse (λ = 1064 nm). We employ OH* chemiluminescence to visualize the evolution of the early flame kernel. For single-pulse laser ignition at lean conditions, the flame kernel separates through third lobe detachment, corresponding to high strain rates that extinguish the flame. In this work, we investigate the capabilities of the dual-pulse to control the plasma-driven fluid dynamics by adjusting the axial offset of the two focal points. In particular, we find there exists a beam waist offset whereby the resulting vorticity suppresses formation of the third lobe, consequently reducing flame stretch. With this approach, we demonstrate that the dual-pulse method enables reduced flame speeds (at early times), an extended lean limit, increased combustion efficiency, and decreased laser energy requirements.

Mechanical engineering↗
DOE OSTI2024

Modeling Dust Production, Growth, and Destruction in Reionization-era Galaxies with the CROC Simulations. II. Predicting the Dust Content of High-redshift Galaxies

Abstract We model the interstellar dust content of the reionization era with a suite of cosmological, fluid-dynamical simulations of galaxies with stellar masses ranging from ∼10 5 to 10 9 M ⊙ in the first 1.2 Gyr of the Universe. We use a post-processing method that accounts for dust creation and destruction processes, allowing us to systematically vary the parameters of these processes to test whether dust-dependent observable quantities of galaxies at these epochs could be useful for placing constraints on dust physics. We then forward model observable properties of these galaxies to compare to existing data. We find that we are unable to simultaneously match existing observational constraints with any one set of model parameters. Specifically, the models that predict the largest dust masses D / Z ≳ 0.1 at z = 5—because of high assumed production yields and/or efficient growth via accretion in the interstellar medium—are preferred by constraints on total dust mass and infrared (IR) luminosities, but these models produce far too much attenuation in the ultraviolet (UV), preventing them from matching observations of β UV . To investigate this discrepancy, we analyze the relative spatial distribution of stars and dust as probed by IR and UV emission, which appear to exhibit overly symmetric morphologies compared to existing data, likely due to the limitations of the stellar feedback model used in the simulations. Our results indicate that the observable properties of the dust distribution in high redshift galaxies are a particularly strong test of stellar feedback.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Machine Learning Models for Predicting Molecular UV–Vis Spectra with Quantum Mechanical Properties

Accurate understanding of Ultraviolet–visible (UV–Vis) spectra is critical for highthroughput design of compounds for drug discovery. Experimentally determining UV–Vis spectra can become expensive when dealing with a large quantity of novel molecules. This provides us an opportunity to drive computational advances in molecular property predictions using quantum mechanics and machine learning. In this work, we use both Quantum Mechanically (QM) predicted and measured UV–Vis spectra as input to modify four different machine learning architectures: UVvis-SchNet, UVvis- DTNN, UVvis-Transformer, and UVvis-MPNN. Here we find that the UVvis-MPNN model outperforms the other models when using optimized 3D coordinates and QM predicted spectra as input features. This model has the highest performance for predicting UVVisible spectra with a training RMSE of 0.06 and validation RMSE of 0.08.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Chapter 13: A Simple Estimation of UV Irradiance Under Clear-Sky Conditions

Accelerated aging tests are designed to estimate the useful life of products in their end-use environment. There is currently no simple way to answer the age-old question: “How long should I run my weathering test to reproduce 1 year of outdoor aging?” At the very least, there is need to (1) evaluate the acceleration rate associated with each stress factor and (2) estimate the intensity of the stress factors that the products under scrutiny are exposed to in natural aging. In this chapter, a model is introduced to calculate the ratio between ultraviolet (UV) irradiance and global horizontal irradiance (GHI). This method was empirically derived from measured or simulated irradiance data and validated against outdoor observations. This ratio provides a simple way to estimate the UV dose that samples are exposed to at any outdoor location.

ENERGY PLANNING, POLICY, AND ECONOMY,OTHER INSTRUM↗
DOE OSTI2020

IR dynamics from UV divergences: UV/IR mixing, NCFT, and the hierarchy problem

The persistence of the hierarchy problem points to a violation of effective field theory expectations. A compelling possibility is that this results from a physical breakdown of EFT, which may arise from correlations between ultraviolet (UV) and infrared (IR) physics. To this end, we study noncommutative field theory (NCFT) as a toy model of UV/IR mixing which generates an emergent infrared scale from ultraviolet dynamics. We explore the range of such theories where ultraviolet divergences are transmogrified into infrared scales, focusing particularly on the properties of Yukawa theory, where we identify a new infrared pole accessible in the s-channel of the Lorentzian theory. We further investigate the interplay between UV-finiteness and UV/IR mixing by studying properties of the softly-broken noncommutative Wess-Zumino model as soft terms are varied relative to the cutoff. While the Lorentz violation inherent to noncommutative theories may limit their direct application to the hierarchy problem, these toy models provide general lessons to guide the realization of UV/IR mixing in more realistic theories.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Phases of 2D massless QCD with qubit regularization

We investigate the possibility of reproducing the continuum physics of 2D S U ( N ) gauge theory coupled to a single flavor of massless Dirac fermion using qubit regularization. The continuum theory is described by N free fermions in the ultraviolet (UV) and a coset Wess-Zumino-Witten (WZW) model in the infrared (IR). In this work, we first explore how well these features can be reproduced using the Kogut-Susskind (KS) Hamiltonian with a finite-dimensional link Hilbert space and a generalized Hubbard coupling. We do this by analyzing the renormalization group (RG) flow diagram of the continuum theory and identifying important phases of the theory. Using strong coupling expansions, we show that our lattice model exhibits a gapped dimer phase and a spin-chain phase. Furthermore, for N = 2 , using tensor network methods, we show that there is a second-order phase transition between these two phases, which we identify as the critical surface of the continuum theory that connects the IR and UV fixed points. In the IR, we identify the critical theory at the transition as the expected S U ( 2 ) 1 WZW model. Lastly, we argue that modifications of our model may allow the study of the UV physics of free fermions. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Plutonium Speciation and Oxidation State Distributions in the Presence of Citrate

We explored the speciation and kinetics of the Pu(VI)-citrate and Pu(III)-citrate systems (pH m = 2.5–11.0, I = 0.1 M NaCl, T = 23 °C, O 2 (g) < 2 ppm) using ultraviolet–visible–near-infrared (UV–vis–NIR) spectrophotometry, solvent extraction, and PHREEQC modeling. Formation constants were determined for PuO 2 (HcitH)(aq) (log K° 1,1 = 1.09 ± 0.05) and PuO 2 (HcitH)(citH) 3– (log K° 1,2 = -0.20 ± 0.07), and evidence for (PuO 2 ) m (citH –k ) n (OH) x 2m(3+k)n–x was identified under alkaline conditions. Pu(VI) species were found to be less stable in the presence of citrate than in the absence of citrate (t ≤ 168 days); the rate of reduction increased with increasing pH. Further, the direct reduction of Pu(VI) to Pu(IV) was required to fit experimental data in the presence of citrate but did not improve the fit for Pu in the absence of citrate. We also observed increased Pu(III) stability in the presence of citrate (t ≤ 293 days), with higher concentrations of Pu(III) favored at lower pH. Finally, we provide evidence of a radiolysis-driven mechanism for the citrate-mediated reduction of plutonium that involves electron transfer from the oxidative breakdown of citrate. Our work highlights the need to investigate the redox effect of organic ligands on plutonium oxidation states under repository-relevant conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Constraining the Milky Way’s ultraviolet-to-infrared SED with Gaussian process regression

ABSTRACT Improving our knowledge of global Milky Way (MW) properties is critical for connecting the detailed measurements only possible from within our Galaxy to our understanding of the broader galaxy population. We here train Gaussian process regression (GPR) models on SDSS (Sloan Digital Sky Survey) galaxies to map from galaxy properties (stellar mass, apparent axial ratio, star formation rate, bulge-to-total ratio, disc scale length, and bar vote fraction) to ultraviolet (UV; GALEX FUV/NUV), optical (SDSS ugriz), and infrared (IR; 2MASS JHKs and WISE W1/W2/W3/W4) fluxes and uncertainties. With these models, we estimate the photometric properties of the MW, resulting in a full UV-to-IR spectral energy distribution (SED) as it would be measured externally, viewed face-on. We confirm that the MW lies in the green valley in optical diagnostic diagrams, but show for the first time that the MW is in the star-forming region in standard UV and IR diagnostics – characteristic of the population of red spiral galaxies. Although our GPR method predicts one band at a time, the resulting MW UV–IR SED is consistent with SEDs of local spirals with characteristics broadly similar to the MW, suggesting that these independent predictions can be combined reliably. Our UV–IR SED will be invaluable for reconstructing the MW’s star formation history using the same tools employed for external galaxies, allowing comparisons of results from in situ measurements to those from the methods used for extragalactic objects.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Star cluster classification using deep transfer learning with PHANGS- HST

Currently available star cluster catalogues from the Hubble Space Telescope (HST) imaging of nearby galaxies heavily rely on visual inspection and classification of candidate clusters. Here, the time-consuming nature of this process has limited the production of reliable catalogues and thus also post-observation analysis. To address this problem, deep transfer learning has recently been used to create neural network models that accurately classify star cluster morphologies at production scale for nearby spiral galaxies (D ≲ 20 Mpc). Here, we use HST ultraviolet (UV)–optical imaging of over 20 000 sources in 23 galaxies from the Physics at High Angular resolution in Nearby GalaxieS (PHANGS) survey to train and evaluate two new sets of models: (i) distance-dependent models, based on cluster candidates binned by galaxy distance (9–12, 14–18, and 18–24 Mpc), and (ii) distance-independent models, based on the combined sample of candidates from all galaxies. We find that the overall accuracy of both sets of models is comparable to previous automated star cluster classification studies (~60–80 per cent) and shows improvement by a factor of 2 in classifying asymmetric and multipeaked clusters from PHANGS-HST. Somewhat surprisingly, while we observe a weak negative correlation between model accuracy and galactic distance, we find that training separate models for the three distance bins does not significantly improve classification accuracy. We also evaluate model accuracy as a function of cluster properties such as brightness, colour, and spectral energy distribution (SED)-fit age. Based on the success of these experiments, our models will provide classifications for the full set of PHANGS-HST candidate clusters (N ~ 200 000) for public release.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Role Evaluation of Active Groups in Lignin on UV-Shielding Performance

The contribution of the active groups in lignin to ultraviolet (UV)-shielding performance still remains unclear. In this study, we employed 16 lignin model compounds and theoretical calculations to ascertain the contribution of different functional groups to UV-shielding performance. These results showed that the order of UV-shielding performance on functional groups was -C=C–CHO > -C=C–COOH > -C=C–CH 2 OH > --C=C > quinone > -COOH > -OCH 3 ≈ -OH. Moreover, the synergism between the para-substituted electron-donating group -OH and the electron-withdrawing group allyl on the aromatic ring played a major role in UV-shielding performance of lignin models, whereas the additive effect of meta/ortho-substituted -OCH 3 played a secondary role. Furthermore, we found that the hydrophile–lipophile balance (HLB) value of lignin models also greatly affected the sunscreen protection factor (SPF) of lignin model-based sunscreens. A closer HLB value of lignin to 8.89 corresponded with a higher SPF of the lignin model-based sunscreen. The commercial photoprotective ingredient ethylhexyl methoxycinnamate (EHMC) and lignin models had a synergistic effect on UV-shielding performance caused by the π–π stacking interaction between the parallel-displaced stacked aromatic rings of lignin models and EHMC. Additionally, the UV irradiation test showed that these sunscreens prepared using lignin models and EHMC exhibited good photostability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Multiphase Processing of the Water-Soluble and Insoluble Phases of Biomass Burning Organic Aerosol

Biomass burning is one of the most significant sources of organic aerosol in the atmosphere. Biomass burning organic aerosol (BBOA) has been observed to undergo liquid– liquid phase separation (LLPS) to give core–shell morphology with the hydrophobic phase encapsulating the hydrophilic phase, potentially impacting the evolution of light-absorbing components, i.e., brown carbon (BrC), through multiphase processes. Here, we demonstrate how multiphase processing differs between the watersoluble (i.e., hydrophilic) and insoluble (i.e., hydrophobic) phases of BBOA in terms of reactive uptake of ozone in a coated-wall flow tube. Effects of relative humidity (RH) and ultraviolet (UV) irradiation were investigated. Experimental timeseries were used to inform simulations using multilayer kinetic modeling. Among non-irradiated thin films, the uptake coefficient was greatest for the water-soluble phase at 75% RH (3 × 10 –5 , corresponding to a diffusion coefficient of BrC, D BrC , of 3 × 10 –9 cm 2 s –1 ) and least for the same phase at 0% RH (1 × 10 –5 , corresponding to D BrC of 1 × 10 –10 cm 2 s –1 ). The uptake coefficient for the water-insoluble phase fell between these two (about 1.5 × 10 –5 ), regardless of RH, and the corresponding D BrC increased only slightly (8 × 10 –10 cm 2 s –1 at 0% RH to 9 × 10 –10 cm 2 s –1 at 75% RH). The uptake coefficients of both phases at 0% RH decreased significantly after UV irradiation, consistent with a transition from viscous liquid to solid and supported by qualitative microscopy observations. Modeling multiphase ozone oxidation of primary BrC components in the atmosphere demonstrated, first, that LLPS may extend the lifetime of water-soluble BBOA encapsulated by water-insoluble species by a factor of 1.5 at moderate to high RH and, also, that UV irradiation may extend the lifetime of both phases by more than a factor of 2.5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Development of Additive Manufacturing for Ceramic Matrix Composite Vanes

This report discusses the development of additive manufacturing for polymer-derived ceramic materials to create novel cooled gas turbine airfoils made from ceramics. Gas turbine engines have extremely high temperatures in the hot section of the engine that exceed the melting point of nickel superalloy materials that the engine is made from. Advanced cooling technologies have been developed over decades for metallic parts. Ceramic materials have higher temperature capabilities than superalloys, but are difficult to shape in the complex designs used in modern turbines. Several thrusts were investigated during the project, including development of higher material strength resins, improvement of ultraviolet (UV) photopolymerization and post-processing techniques to increase survivability of ceramic parts, thermomechanical modeling of novel ceramic airfoil designs for higher cooling effectiveness, and experimental validation of the modeling and manufacturing in a turbine vane test facility at nondimensional conditions that are relevant to modern gas turbines. Some major findings of the work include a significant increase in ceramic survivability during pyrolysis (a high temperature process that converts the organic material to a ceramic) by adjusting the composition ratios of the resins, as well as a tolulene soak after printing to remove unreacted polymer material. Thermomechanical optimization of the internal cooling structure indicated that a high density pin fin array would enable an 80% increase in overall cooling effectiveness relative to a baseline geometry, which was later verified during experimental testing in a high speed linear cascade. Ceramic vanes were tested at Mach numbers of up to 0.9 which is relevant to modern gas turbines. High temperature capability of the ceramic vanes was not tested in this work.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ultraviolet running constraints on low mass dark sectors

We analyze the UV breakdown of Sub-GeV dark matter models that live in a new, dark U(1) sector. Many of these models include a scalar field, which is either the dark matter itself or a dark Higgs field that generates mass terms for the dark matter particle via spontaneous symmetry breaking. A quartic self coupling of this scalar field is generically allowed, and we show that its running is largely governed by the strength of the U(1) gauge field, α D . Furthermore, it consistently has a lower Landau pole than the gauge coupling. Link fields, which couple to both the dark sector and the Standard Model (SM), connect these Landau poles to constraints on SM charged particles. Current LHC constraints on link fields are compatible with α D ≲ 0.5 - 1 for most of the mass range in most models, while smaller values, α D ≲ 0.15, are favored for Majorana DM.

new light particles↗
DOE OSTI2022

Comparing and contrasting In-Vial and full-scale systems for sparging volatile analytes

Here, in-vial sparging was demonstrated as an effective, practical alternative to a full-scale sparging system for supporting the analysis of volatile constituents. Using elemental mercury (Hg 0 ) and toluene as representative purgeable analytes, the mass removal for various sparge configurations was measured and a reduced order model was developed and validated. In the primary experiments, Hg 0 in the sparge gas was trapped on activated carbon or gold, thermally desorbed, and quantified using atomic absorption or atomic fluorescence spectroscopy. Toluene experiments using the same in-vial sparge apparatus and sparge parameters were performed to demonstrate the applicability of the reduced order model to a broad range of compounds. Toluene removal was tracked by measuring the remaining toluene in sparged aliquots using Ultraviolet-visible (UV–Vis) spectroscopy. For the sparging, flow rates varied from 25 to 75 mL/min for periods from 0 to 30 min. Sparge performance, mass removal as a function of time, and sparge gas volume were measured for both in-vial and full-scale systems. A model based on dimensionless Henry's Law coefficient, normalized sparge gas volume, and fractional extent of equilibrium matched the experimental data for both compounds and provides a practical tool for future applications. For the conditions tested in this study, the calibrated model indicated that the sparge gas in the in-vial system reached approximately 33% of its equilibrium value before exiting the water surface, while a full-scale system reached approximately 100%. The tests validated the quality, reproducibility, and predictability of sparging performance for both full scale and in-vial sparge systems. Related factors such as waste generation, worker risk, and labor were also assessed. Full scale sparge systems provide the advantage of lower detection levels due to larger sample volume, while the in-vial sparge systems provide advantages for most other factors; including automatability, reducing secondary wastes, lessening the need to clean and check the sparge apparatus, and lowering labor and costs. The data and associated reduced order model support continued development and deployment of in-vial sparge platforms as a practical option for analysis of purgeable analytes such as volatile organic compounds and volatile metals/organometallics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗