Search NASA⌕ Search

SEARCH · Search NASA

Results for “undulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Undulation and anomaly estimation using Geos-3 altimeter data without precise satellite orbits

Geos-3 altimeter data was used to obtain an approximate geoid undulation which was contaminated by long wavelength errors caused primarily by altimeter bias and orbit error. This error was reduced by fitting, with a low degree polynomial, the raw undulation data to the undulations implied by the GEM 7 potential coefficients in an adjustment process that included conditions on tracks that cross. These adjusted undulations were used to construct a geoid map in the Geos-3 calibration area using a least squares filter to remove the remaining noise in the undulations.

Rummel, R.↗

The indirect effects on the computation of geoid undulations

The indirect effects on the geoid computation due to the second method of Helmert's condensation were studied. when Helmert's anomalies are used in Stokes's equation, there are three types of corrections to the free air geoid. The first correction, the indirect effect on geoid undulation due to the potential change in Helmert's reduction, had a maximum value of 0.51 meters in the test area covering the United States. The second correction, the attraction change effect on geoid undulation, had a maximum value of 9.50 meters when the 10 deg cap was used in Stokes' equation. The last correction, the secondary indirect effect on geoid undulatin, was found negligible in the test area. The corrections were applied to uncorrected free air geoid undulations at 65 Doppler stations in the test area and compared with the Doppler undulations. Based on the assumption that the Doppler coordinate system has a z shift of 4 meters with respect to the geocenter, these comparisons showed that the corrections presented in this study yielded improved values of gravimetric undulations.

Wichiencharoen, C.↗

Spontaneous radiation from relativistic electrons in a tapered undulator

The spectrum, angular distribution, polarization, and coherence properties of the radiation emitted by relativistic electrons undulating through a quasiperiodic tapered magnetic field are studied. Tapering the wavelength and/or field strength along the undulator's axis has the effect of spreading the spectral line to higher frequencies; interference over this broader spectral range results in a more complex line shape. The angular dependence, on the other hand, is not affected by the amount of taper. The polarization of the radiation in the forward direction is determined by the transverse polarization of the undulator, but the polarization changes off axis. The radiation patterns predicted here are distinct from those of untapered undulators and their detection is now feasible. They will provide useful diagnostics of electron trajectories and threshold behavior in free-electron-laser oscillators using tapered undulators.

Bosco, P.↗

The precise computation of geoid undulation differences with comparison to results obtained from the global positioning system

Ellipsoidal height differences have been determined for 13 station pairs in the central Ohio region using measurements made with the Global Positioning System. This information was used to compute geoid undulation differences based on known orthometric heights. These differences were compared to gravimetrically-computed undulations (using a Stokes integration procedure, and least squares collocation having an internal r.m.s. agreement of plus or minus 1 cm in undulation differences). The two sets of undulation differences have an r.m.s. discrepancy of plus or minus 5 cm while the average station separation is of the order of 14 km. This good agreement suggests that gravimetric data can be used to compute accurate geoid undulation differences that can be used to convert ellipsoidal height differences obtained from GPS to orthometric height differences.

Engelis, T.↗

Geoid undulation computations at laser tracking stations

Geoid undulation computations were performed at 29 laser stations distributed around the world using a combination of terrestrial gravity data within a cap of radius 2 deg and a potential coefficient set up to 180 deg. The traditional methods of Stokes' and Meissl's modification together with the Molodenskii method and the modified Sjoberg method were applied. Performing numerical tests based on global error assumptions regarding the terrestrial data and the geopotential set it was concluded that the modified Sjoberg method is the most accurate and promising technique for geoid undulation computations. The numerical computations for the geoid undulations using all the four methods resulted in agreement with the ellipsoidal minus orthometric value of the undulations on the order of 60 cm or better for most of the laser stations in the eastern United States, Australia, Japan, Bermuda, and Europe. A systematic discrepancy of about 2 meters for most of the western United States stations was detected and verified by using two relatively independent data sets. For oceanic laser stations in the western Atlantic and Pacific oceans that have no terrestrial data available, the adjusted GEOS-3 and SEASAT altimeter data were used for the computation of the geoid undulation in a collocation method.

Despotakis, Vasilios K.↗

Power spectra of geoid undulations

Data from spacecraft altimeters are expected to contribute to an improved determination of the marine geoid. To better define altimeter system design requirements for geoid recovery, amplitudes of geoid undulations at short wavelengths were examined. Models of detailed geoids in selected areas around the earth, developed from a combination of satellite derived spherical harmonics and 1 deg-by-1 deg area mean free-air gravity anomalies, were subjected to a spectral analysis. The resulting undulation power spectra were compared to existing estimates for the magnitude of geoid undulations at short wavelengths. The undulation spectra were found to be consistent with Kaula's rule of thumb, following an inverse third power relationship with spatial frequency for wavelengths at least as small as 300 km. The requirements imposed by this relationship on altimeter accuracy, data rate, and horizontal resolution to meet the goal of a detailed geoid description are discussed.

Brown, R. D.↗

A comparison of satellite Doppler and gravimetric geoid undulations considering terrain-corrected gravity data

Geoid undulations derived from Doppler satellite positioning are compared with corresponding values derived from terrestrial and satellite information using three different procedures. Doppler undulations are compared with uncorrected gravimetric undulations, and systematic differences of 1.6 m and 0.4 m are found for western and eastern U.S. stations, respectively. The systematic difference of 1.6 m was reduced to 0.1 m when terrain-related corrections were applied. Undulations computed from a spherical harmonic expansion to degree 180 yielded standard deviations only slightly poorer than the combined data. A more systematic difference in the western than in the eastern stations remained.

Rapp, R. H.↗

Compressive behavior of undulations in filament-wound composites

The compressive performance of a filament-wound cylinder can be severely degraded by unavoidable fiber curvatures due to the presence of crossover bands. These crossover bands contain fiber undulations which influence the compressive strength, stiffness, and associated failure mechanisms of a filament-wound structure. The primary objectives of this study were to identify failure mechanisms and measure the compressive strength and stiffness of test specimens which model the microundulations. Compressive tests were conducted on flat-panel coupons which were developed to model the mechanics of large-scale fiber undulation regions in filament-wound composite cylinders. The primary effect of the undulation regions within a filament-wound structure is to initiate failure. Depending on the overall laminate configuration, the failure process includes various combinations of failure mechanisms, such as delaminations, matrix splitting and/or fiber fracture. These failure mechanisms are aggravated by the presence of large deformations caused by the reduction in local compressive stiffness and the introduction of complex material couplings due to the fiber undulation. Furthermore, the adjacent layers have been shown to strongly influence the compressive strength, stiffness, and associated failure mechanisms by weakening or reinforcing the laminate.

Jensen, David W.↗

Studies of classical radiation emission from plasma wave undulators

We examine the characteristics of the classical radiation emitted by a relativistic electron beam that propagates perpendicularly through a large amplitude relativistic plasma wave. Such a study is useful for evaluating the feasibility of using relativistic plasma waves as extremely short wavelength undulators for generating short wavelength radiation. The electron trajectories in a plasma wave undulator are obtained using perturbation techniques and are then compared to numerical simulation results. The frequency spectrum and angular distribution of the spontaneous radiation emitted by a single electron and the stimulated radiation gain are obtained analytically, and are then compared to 3-D numerical simulations. The characteristics of the plasma wave undulator are compared to the ac FEL undulator and the conventional FEL.

Williams, Ronald L.↗

A Comparison of Geoid Undulations for West Central Greenland

The accuracy of a new local gravity field model, GEOID94A, is examined at a site on the western Greenland ice sheet. The model, developed by the Danish National Survey and Cadastre, incorporates several new gravity data sets including an extensive amount of airborne gravity data. Model-derived geoid undulations were compared to independently determined undulations found by differencing the elevations from Global Positioning System controlled airborne laser altimetry and optical leveling surveys. Differences between the two sets of undulations were less than +/- 6 cm RMS. The comparison improved (+/- 5 cm RMS) when GEOID94A undulations were adjusted by local gravity observations also acquired at the site. Our comparisons demonstrate that GEOID94A adequately models the long to intermediate wavelengths of the gravity field. We conclude that GEOID94A constitutes a reliable reference model for studies of Greenland's gravity field.

Roman, Daniel R.↗

Interpretation of glory undulations in scattering cross sections Amplitudes

Information on the interaction potential contained in the undulations in the energy dependence of the total scattering cross section is deduced by measuring the undulation amplitude. The amplitude is interpreted with emphasis on features that are independent of any specific assumptions about the form of the interaction potential. It is shown that the previously measured spacings of the undulations describe the area of the potential well, whereas the amplitudes provide a measure of the force in the vicinity of the distance of closest approach. This information can be used to test proposed potential models and to suggest ways of improving inadequate models; if the predicted spacing is too large, then the area of the well of the model is too small, and if the predicted amplitude is too small, then the repulsive wall of the potential is too steep.

Greene, E. F.↗

Global accuracy estimates of point and mean undulation differences obtained from gravity disturbances, gravity anomalies and potential coefficients

Through the method of truncation functions, the oceanic geoid undulation is divided into two constituents: an inner zone contribution expressed as an integral of surface gravity disturbances over a spherical cap; and an outer zone contribution derived from a finite set of potential harmonic coefficients. Global, average error estimates are formulated for undulation differences, thereby providing accuracies for a relative geoid. The error analysis focuses on the outer zone contribution for which the potential coefficient errors are modeled. The method of computing undulations based on gravity disturbance data for the inner zone is compared to the similar, conventional method which presupposes gravity anomaly data within this zone.

Jekeli, C.↗

Modifying Stokes' function to reduce the error of geoid undulation computations

Errors in computations of the geoid undulation, which determines the position of the geoid with respect to a reference ellipsoid, introduced by various modifications of the Stokes' function in the Stokes integral formula for the undulation are examined in light of currently available harmonic coefficients. The variants considered include the conventional Molodenskii truncation theory, in which integration is limited to a spherical cap, and the variations suggested by Molodenskii (1958) and Meissl (1971). In computations of the undulation from gravity anomalies in a spherical cap and terrestrial and satellite harmonic potential coefficients (GEM 9 and GEM 10B), it is shown that either of the modifications to the conventional Molodenskii theory results in substantial reductions in truncation errors, with the simpler modification of Meissl even providing superior results in certain circumstances.

Jekeli, C.↗

Geoid undulation accuracy

The determination of the geoid and equipotential surface of the Earth's gravity field, has long been of interest to geodesists and oceanographers. The geoid provides a surface to which the actual ocean surface can be compared with the differences implying information on the circulation patterns of the oceans. For use in oceanographic applications the geoid is ideally needed to a high accuracy and to a high resolution. There are applications that require geoid undulation information to an accuracy of +/- 10 cm with a resolution of 50 km. We are far from this goal today but substantial improvement in geoid determination has been made. In 1979 the cumulative geoid undulation error to spherical harmonic degree 20 was +/- 1.4 m for the GEM10 potential coefficient model. Today the corresponding value has been reduced to +/- 25 cm for GEM-T3 or +/- 11 cm for the OSU91A model. Similar improvements are noted by harmonic degree (wave-length) and in resolution. Potential coefficient models now exist to degree 360 based on a combination of data types. This paper discusses the accuracy changes that have taken place in the past 12 years in the determination of geoid undulations.

Rapp, Richard H.↗

Influence of local fiber undulations on the global buckling behavior of filament-wound cylinders

The predicted compressive stiffness and buckling strength of filament-wound cylinders using classical lamination theory is significantly higher than those observed experimentally. This discrepancy is partially influenced by the variation of mechanical properties in the region of fiber undulations. These regions are localized geometric defects intrinsic to the filament-winding, weaving, and braiding processes. In the present work, the average mechanical properties of the fiber undulation region are quantified using modified models of woven-fabric composites to account for the 3-dimensional effects. The mechanical properties thus determined can be incorporated as local element properties into global finite-element models. Preliminary results from large-displacement analyses of filament-wound cylinders are relatively more accurate when fiber undulations are accounted for.

Jensen, D. W.↗

Physical interpretation of glory undulations in scattering cross sections.

The relation between glory undulations and the detailed nature of the potential energy of interaction of two molecules having a minimum containing one or more bound states is clarified, i.e., a physical interpretation is given to the undulations. Although the number, amplitude, and spacing of the oscillations all give information about the potential, the spacing is most often used because it can be most accurately measured. Results are given which show fairly explicitly just what information on the interaction potential is contained in the spacing of the glory oscillations. Glory oscillations put strong known constraints on any potential model.

Greene, E. F.↗

Global anomaly and undulation recovery using GEOS-3 altimeter data

The data were adjusted to remove orbit error and altimeter bias in a primary adjustment and four regional adjustments. The root mean square crossover discrepancy was about + or - 55 cm after the adjustment. The adjusted altimeter data, now considered to give geoid undulations, was used to predict values at 1 deg intersections from which an oceanic geoid map, with predicted accuracies, was prepared at a two meter contour interval. This geoid was compared to the Gemini 9 geoid over very long profiles to examine the long wavelength error in the altimeter geoid. At a wavelength of 13,010 km the root mean squares difference was 57 cm. The altimeter geoid was also compared to altimeter geoids fixed by precise orbits. A root mean square difference was found of about 1 m with a systematic difference that implied the equatorial radius of the earth was 6,378,137 meters. The adjusted altimeter data was also used to determine a total of 29,479 1 deg x 1 deg anomalies (and undulations).

Rapp, R. H.↗

Reducing the error of geoid undulation computations by modifying Stokes' function

The truncation theory as it pertains to the calculation of geoid undulations based on Stokes' integral, but from limited gravity data, is reexamined. Specifically, the improved procedures of Molodenskii et al. are shown through numerical investigations to yield substantially smaller errors than the conventional method that is often applied in practice. In this improved method, as well as in a simpler alternative to the conventional approach, the Stokes' kernel is suitably modified in order to accelerate the rate of convergence of the error series. These modified methods, however, effect a reduction in the error only if a set of low-degree potential harmonic coefficients is utilized in the computation. Consider, for example, the situation in which gravity anomalies are given in a cap of radius 10 deg and the GEM 9 (20,20) potential field is used. Then, typically, the error in the computed undulation (aside from the spherical approximation and errors in the gravity anomaly data) according to the conventional truncation theory is 1.09 m; with Meissl's modification it reduces to 0.41m, while Molodenskii's improved method gives 0.45 m. A further alteration of Molodenskii's method is developed and yields an RMS error of 0.33 m. These values reflect the effect of the truncation, as well as the errors in the GEM 9 harmonic coefficients. The considerable improvement, suggested by these results, of the modified methods over the conventional procedure is verified with actual gravity anomaly data in two oceanic regions, where the GEOS-3 altimeter geoid serves as the basis for comparison. The optimal method of truncation, investigated by Colombo, is extremely ill-conditioned. It is shown that with no corresponding regularization, this procedure is inapplicable.

Jekeli, C.↗