Search NASA⌕ Search

SEARCH · Search NASA

Results for “vapor phase dehydrogenation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Technoeconomic analysis of hydrogen storage using 1,4-butanediol (BDO)/γ-butyrolactone (GBL) as a stationary backup power system

Liquid organic hydrogen carriers (LOHCs) are compounds that store and release hydrogen in stable forms at high density. While one-way carriers such as methanol and ammonia have gained attention, their economic advantages are often realized from their use as an export product and direct use as a fuel. Liquid carrier materials that can instead be cycled for energy storage have promise for stationary power applications. In particular, the reversible LOHC system 1,4-butanediol (BDO, H 2 -rich) and gamma-butyrolactone (GBL, H 2 -lean) has a lower enthalpy of dehydrogenation compared to conventional cyclic hydrocarbons and can utilize non-precious metal copper-based catalysts. Here, in this study, BDO/GBL system capital and operating expenses are characterized for vapor phase versus liquid phase hydrogenation and dehydrogenation in a 10 MW backup power application corresponding to sizing of Tier 2 datacenters as well as other critical infrastructure such as hospitals. Costs are benchmarked against two incumbent technologies: a well-established methylcyclohexane/toluene carrier system and compressed gas storage. BDO/GBL storage costs are found to differ substantially between operating modes, with liquid phase hydrogenation coupled with liquid phase dehydrogenation leading to the lowest LCOS of $\$$4.58/kg H 2 in the absence of byproduct formation. In this bounding case, LCOS for the BDO/GBL system is lower than for MCH/TOL ($\$$6.97/kg H 2 ) and compressed gas ($\$$8.48/kg H 2 at 170 bara and $\$$12.05/kg H 2 at 350 bara). However, escalating costs of carrier replacement due to byproduct formation (ranging from an added $\$$6–11/kg H 2 ) illustrate the need for highly selective catalysts to ensure BDO/GBL carrier viability.

BDO/GBL↗
DOE OSTI2023

A Coverage Self-Consistent Microkinetic Model for Vapor-Phase Formic Acid Decomposition over Pd/C Catalysts

An iterative approach utilizing density functional theory (DFT, PW91-GGA)-informed mean-field microkinetic models and reaction kinetics experiments is used to determine the reaction mechanism and the active site for formic acid (HCOOH, FA) decomposition over a Pd/C catalyst. Models parametrized using DFT energetics on clean Pd(100) and Pd(111) required large corrections to the DFT energetics for capturing our experimental data. Further, both Pd(111) and Pd(100) models predicted a high coverage of adsorbed CO (CO*), inconsistent with the assumption of a clean surface at which the rate parameters for these models were calculated. To better represent the active site under reaction conditions and explicitly account for the presence of CO*, subsequent microkinetic models were formulated using DFT energetics that were calculated on partially (5/9 ML) CO*-covered Pd (111) and (100) facets. Upon parameter adjustment, the resultant 5/9 ML CO*-covered Pd(100) model, although consistent in terms of CO* coverage, was unable to capture the dehydration path measured in the experiments and was, therefore, deemed not to offer an accurate representation of the active site for FA decomposition over Pd/C. In contrast, a partially CO*-covered Pd(111) model was better at representing the catalytic active site, as in addition to being consistent in terms of CO* coverages, it required small adjustments of the DFT parameters to accurately capture the experimental data set (both dehydrogenation and dehydration). Our results suggest that the reaction occurs via the spectroscopically elusive carboxyl (COOH*) intermediate and that spectator CO*-assisted decomposition pathways play an important role under typical experimental conditions. In addition, our study highlights the importance of striving for coverage self-consistent microkinetic models and for including spectator-assisted mechanisms in order to develop an improved picture of the active site under reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Aqueous-phase effects on ethanol decomposition over Ru-based catalysts

The effects of an aqueous phase on ethanol decomposition for hydrogen production over a Ru(0001) catalyst surface model have been investigated from first principles. Solvent effects on the reaction mechanism and kinetic parameters have been quantified with the help of a microkinetic reactor model, density functional theory, and an implicit solvation scheme (iSMS). Our calculations indicate that in both vapor- and aqueous-phase reaction environments, the ethanol decomposition starts with acetaldehyde formation on the surface, some of which further dehydrogenates to ketenyl species (CHCO), where the C–C bond cleaves to form methylidyne (CH) and CO. In the vapor phase, adsorbed CH gets hydrogenated to methane, and CO desorbs or undergoes methanation reducing the amount of hydrogen produced. In contrast, under aqueous phase reaction conditions, the methanation is inhibited, and the water–gas shift (WGS) reaction is accelerated, leading to complete conversion of CO to CO 2 and H 2 . Furthermore, calculations indicate that the observed reaction behavior under aqueous phase reforming conditions originates primarily from the higher water chemical potential, and implicit solvent models predict only a small solvation effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Atomic Layer Deposition for Materials-Based H2 Storage: Mg(BH4)2 as a Case Study

To meet the requirements for vehicular solid-state hydrogen (H2) storage, novel materials such as metal borohydrides have increasingly been investigated, in particular, magnesium borohydride (Mg(BH4)2). While these materials have a high H2 capacity (> 14 wt%), poor hydrogenation-dehydrogenation cyclability and material degradation, (e.g., loss of boron), need to be overcome. Prior research has indicated that nano-encapsulation and chemical additives can address these challenges. Therefore, we pursued these two strategies simultaneously with atomic layer deposition (ALD) on Mg(BH4)2. We investigated the use of metal-oxides (e.g., Al2O3, TiO2, CeO2), Pt- group metals (e.g., Pd, Ru) as well as pulsing only one precursor molecule (e.g., Al(CH3)3, BBr3, TiCl4), and assessed these modified Mg(BH4)2 in terms of their H2 storage properties. This presentation will also present the benefits and limitations of using vapor-phase techniques to modify the properties of Mg(BH4)2.

atomic layer deposition↗
DOE OSTI2022

Methanol Decomposition on Copper Surfaces under Ambient Conditions: Mechanism, Surface Kinetics, and Structure Sensitivity

Here, we study the adsorption of methanol vapor under ambient pressure and temperature conditions on low-index Cu surfaces using surface-sensitive infrared (IR) and X-ray spectroscopy techniques. The first step of methanol decomposition, i.e. , breaking of the O—H bond to form surface-bound methoxy, readily occurs under ambient conditions. Time-lapse IR spectra clearly indicate a gradually decreasing methoxy coverage, which does not obey well established kinetic models. We rationalize the initial temperature-independent, high, nonequilibrium coverage of methoxy by a H-bonded methanol assembly in the precursor state. A temperature-dependent equilibrium coverage is achieved as the excess methoxy is eliminated gradually via further dehydrogenation to CO that desorbs to the gas phase. The kinetics of this process displays a significant structure sensitivity with considerably faster kinetics on the Cu(110) surface compared to Cu(111) and Cu(100) surfaces.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Converting polyisoprene rubbers into bio-jet fuels via a cascade hydropyrolysis and vapor-phase hydrogenation process

Producing alternative drop-in bio-jet fuels from biomass provides a promising approach to achieve carbon neutrality. Here, to upcycle biomass-based polyisoprene rubbers into jet-fuel range C 10 cycloalkane, we proposed a cascade hydropyrolysis and vapor-phase hydrogenation process in a flow-through two-stage pressurized fixed-bed reactor. The hydropyrolysis temperature in the first stage is of vital importance for the formation of primary limonene intermediate in the non-catalytic degradation of polyisoprene rubbers, and a reaction temperature of 460 °C maximized limonene yield to 588.6 mg/g for natural rubber and 546.2 mg/g for Eucommia rubber. Over a Pt/C catalyst loaded in the second stage, the limonene intermediate produced from the first-stage reactor can be completely hydrogenated, giving a 642.7 mg/g yield of jet-fuel range C 10 cycloalkane with 83.6% selectivity. The depolymerization mechanism of polyisoprene rubbers was thoroughly studied, and a competitive reaction between limonene hydrogenation and limonene dehydrogenation was observed. This is the first report on producing C 10 cycloalkane from natural rubbers via a cascade hydropyrolysis and hydrogenation process, providing a promising strategy to upcycle polyisoprene rubbers into bio-jet fuels.

30 DIRECT ENERGY CONVERSION↗