Search NASA⌕ Search

SEARCH · Search NASA

Results for “variable data rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

A high performance, continuously variable data rate, digitally implemented BPSK modem for deep space network

This paper describes a high performance, digital, BPSK modem designed to improve the telemetry data handling capability of NASA's Deep Space Network. The data rate is continuously variable from 0.5 Mbps to 30 Mbps. It uses newly designed, high speed digital alogrithms for receive filtering, carrier tracking, bit timing and AGC. The carrier and bit time tracking loops have been designed to provide fast acquisition and low tracking phase jitter at E sub b/N sub 0 as low as -4 dB and bit transition density as low as 10%. The performance of the modem is within 0.65 dB below 10 Mbps, 1.0 dB from 10 Mbps to 20 Mbps, and 1.5 dB above 20 Mbps of theoretical coherent BPSK at a BER of 0.0004.

Paik, W. H.↗
NASA NTRSDate not supplied

Application of Variable Data Rate (VDR) Towards Channel Optimization

Recognizing the vagaries of channel impediments, one way to optimize aggregate channel information throughput is to maintain a constant symbol rate but vary the modulation scheme and/or the codec rate. The CCSDS VCM and ACM standards promulgation relies upon this kind of an approach. We offer a considerably simpler alternative for spacecraft that are not parked in geo-stationary orbit, one that can rely upon conventional spacecraft housekeeping schedules to change spacecraft and ground operations and will minimize the possibility of requiring any spacecraft hardware accommodations to incorporate. We suggest the use of varying the physical symbol rate within the channel to both initiate acquisition earlier in a pass and retain the link longer as the pass tends toward loss of signal. There is nothing new in what we propose, just a recognition of what has been successful in the past and employed in multiple missions. Integrating over the periodicity of orbit repetition, we shall show that any link that is dependent primarily on a varying range from spacecraft to ground only requires a maximum of five symbol rate transitions in order to optimize total information throughput. By applying these symbol rate transitions using almost rigid rules, we anticipate doubling the information throughput for conventional LEO sun-synchronous orbits. We provide other examples as well.

variable data rate↗
NASA NTRSDate not supplied

Application of Variable Data Rate (VDR) Towards Channel Optimization

Recognizing the vagaries of channel impediments, one way to optimize aggregate channel information throughput is to maintain a constant symbol rate but vary the modulation scheme and/or the codec rate. The CCSDS VCM and ACM standards promulgation relies upon this kind of an approach. We offer a considerably simpler alternative for spacecraft that are not parked in geo-stationary orbit, one that can rely upon conventional spacecraft housekeeping schedules to change spacecraft and ground operations and will minimize the possibility of requiring any spacecraft hardware accommodations to incorporate. We suggest the use of varying the physical symbol rate within the channel to both initiate acquisition earlier in a pass and retain the link longer as the pass tends toward loss of signal. There is nothing new in what we propose, just a recognition of what has been successful in the past and employed in multiple missions. Integrating over the periodicity of orbit repetition, we shall show that any link that is dependent primarily on a varying range from spacecraft to ground only requires a maximum of five symbol rate transitions in order to optimize total information throughput. By applying these symbol rate transitions using almost rigid rules, we anticipate doubling the information throughput for conventional LEO sun-synchronous orbits. We provide other examples as well.

Variable Data Rate↗
NASA NTRS1973

A variable-data-rate, multimode quadriphase modem.

This paper describes the design and performance of a highly versatile modulator and demodulator recently developed to facilitate the evaluation of various digital communications links. The modem is capable of either PSK or QPSK operation and can accommodate a very wide range of continuously tunable data rates (1 kbps to 30 Mbps in each of two channels). In the QPSK mode, operation is possible using either a single serial data stream (single channel operation) or using two mutually independent, unrelated, and asynchronous data streams (dual-channel operation). Integrate and dump detectors are used at the demodulator for regeneration of the data stream(s). Measurements indicate that the performance of the overall system (including the bit detectors) is within 2 dB of the theoretically optimum performance of either PSK or QPSK at any rate within the range of rates provided by the modem, and is within 1 dB of theoretical over most of the range of rates.

Allen, R. W.↗
NASA NTRS1995

Adaptive data rate SSMA system for personal and mobile satellite communications

An adaptive data rate SSMA (spread spectrum multiple access) system is proposed for mobile and personal multimedia satellite communications without the aid of system control earth stations. This system has a constant occupied bandwidth and has variable data rates and processing gains to mitigate communication link impairments such as fading, rain attenuation and interference as well as to handle variable data rate on demand. Proof of concept hardware for 6MHz bandwidth transponder is developed, that uses offset-QPSK (quadrature phase shift keying) and MSK (minimum shift keying) for direct sequence spread spectrum modulation and handle data rates of 4k to 64kbps. The RS422 data interface, low rate voice and H.261 video codecs are installed. The receiver is designed with coherent matched filter technique to achieve fast code acquisition, AFC (automatic frequency control) and coherent detection with minimum hardware losses in a single matched filter circuit. This receiver structure facilitates variable data rate on demand during a call. This paper shows the outline of the proposed system and the performance of the prototype equipment.

Ikegami, Tetsushi↗
NASA NTRS2016

New Approaches for Direct Current (DC) Balanced SpaceWire

Direct Current (DC) line balanced SpaceWire is attractive for a number of reasons. Firstly, a DC line balanced interface provides the ability to isolate the physical layer with either a transformer or capacitor to achieve higher common mode voltage rejection and or the complete galvanic isolation in the case of a transformer. And secondly, it provides the possibility to reduce the number of conductors and transceivers in the classical SpaceWire interface by half by eliminating the Strobe line. Depending on the modulator scheme the clock data recovery frequency requirements may be only twice that of the transmit clock, or even match the transmit clock: depending on the Field Programmable Gate Array (FPGA) decoder design. In this paper, several different implementation scenarios will be discussed. Two of these scenarios are backward compatible with the existing SpaceWire hardware standards except for changes at the character level. Three other scenarios, while decreasing by half the standard SpaceWire hardware components, will require changes at both the character and signal levels and work with fixed rates. Other scenarios with variable data rates will require an additional SpaceWire interface handshake initialization sequence.

Line encoding↗
NASA NTRS2016

New Approaches for DC Balanced SpaceWire

Direct Current (DC) line balanced SpaceWire is attractive for a number of reasons. Firstly, a DC line balanced interface provides the ability to isolate the physical layer with either a transformer or capacitor to achieve higher common mode voltage rejection and/or the complete galvanic isolation in the case of a transformer. Secondly, it provides the possibility to reduce the number of conductors and transceivers in the classical SpaceWire interface by half by eliminating the Strobe line. Depending on the modulator scheme - the clock data recovery frequency requirements may be only twice that of the transmit clock, or even match the transmit clock: depending on the Field Programmable Gate Array (FPGA) decoder design. In this paper, several different implementation scenarios will be discussed. Two of these scenarios are backward compatible with the existing SpaceWire hardware standards except for changes at the character level. Three other scenarios, while decreasing by half the standard SpaceWire hardware components, will require changes at both the character and signal levels and work with fixed rates. Other scenarios with variable data rates will require an additional SpaceWire interface handshake initialization sequence.

SpaceWire↗
NASA NTRS1984

Modular approach for satellite communication ground terminals

The trend in satellite communications is toward completely digital, time division multiple access (TDMA) systems with uplink and downlink data rates dictated by the type of service offered. Trunking terminals will operate in the 550 MBPS (megabit per second) region uplink and downlink, whereas customer premise service (CPS) terminals will operate in the 25 to 10 MBPS region uplink and in the 200 MBPS region downlink. Additional criteria for the ground terminals will be to maintain clock sychronization with the system and burst time integrity to within a matter of nanoseconds, to process required order-fire information, to provide adaptive data scrambing, and to compensate for variations in the user input output data rates, and for changes in range in the satellite communications links resulting from satellite perturbations in orbit. To achieve the required adaptability of a ground terminal to the above mentioned variables, programmable building blocks can be developed that will meet all of these requirements. To maintain system synchronization, i.e., all bursted data arriving at the satellite within assigned TDMA windows, ground terminal transmit data rates and burst timing must be maintained within tight tolerances. With a programmable synchronizer as the heart of the terminal timing generation, variable data rates and burst timing tolerances are achievable. In essence, the unit inputs microprocessor generated timing words and outputs discrete timing pulses.

Gould, G. R.↗
NASA NTRS2012

Psychophysiological Assessment of Fatigue in Commercial Aviation Operations

The overall goal of this study is to improve our understanding of crew work hours, workload, sleep, fatigue, and performance, and the relationships between these variables on actual flight deck performance. Specifically, this study will provide objective measures of physiology and performance, which may benefit investigators in identifying fatigue levels of operators in commercial aviation and provide a way to better design strategies to limit crew fatigue. This research was supported by an agreement between NASA Ames Research Center and easyJet Airline Company, Ltd., Luton, UK. Twenty commercial pilots volunteered to participant in the study that included 15 flight duty days. Participants wore a Zephyr Bioharness ambulatory physiological monitor each flight day, which measured their heart rate, respiration rate, skin temperature, activity and posture. In addition, pilots completed sleep log diaries, self-report scales of mood, sleepiness and workload, and a Performance Vigilance Task (PVT). All data were sent to NASA researchers for processing and analyses. Heart rate variability data of several subjects were subjected to a spectral analysis to examine power in specific frequency bands. Increased power in low frequency band was associated with reports of higher subjective sleepinesss in some subjects. Analyses of other participants data are currently underway.

Hernandez, Norma↗
NASA NTRS1990

A burst compression and expansion technique for variable-rate users in satellite-switched TDMA networks

A burst compression and expansion technique is described for asynchronously interconnecting variable-data-rate users with cost-efficient ground terminals in a satellite-switched, time-division-multiple-access (SS/TDMA) network. Compression and expansion buffers in each ground terminal convert between lower rate, asynchronous, continuous-user data streams and higher-rate TDMA bursts synchronized with the satellite-switched timing. The technique described uses a first-in, first-out (FIFO) memory approach which enables the use of inexpensive clock sources by both the users and the ground terminals and obviates the need for elaborate user clock synchronization processes. A continous range of data rates from kilobits per second to that approaching the modulator burst rate (hundreds of megabits per second) can be accommodated. The technique was developed for use in the NASA Lewis Research Center System Integration, Test, and Evaluation (SITE) facility. Some key features of the technique have also been implemented in the gound terminals developed at NASA Lewis for use in on-orbit evaluation of the Advanced Communications Technology Satellite (ACTS) high burst rate (HBR) system.

Budinger, James M.↗
NASA NTRS1990

A burst compression and expansion technique for variable-rate users in satellite-switched TDMA networks

A burst compression and expansion technique is described for asynchronously interconnecting variable-data-rate users with cost-efficient ground terminals in a satellite-switched, time-division-multiple-access (SS/TDMA) network. Compression and expansion buffers in each ground terminal convert between lower rate, asynchronous, continuous-user data streams and higher-rate TDMA bursts synchronized with the satellite-switched timing. The technique described uses a first-in, first-out (FIFO) memory approach which enables the use of inexpensive clock sources by both the users and the ground terminals and obviates the need for elaborate user clock synchronization processes. A continuous range of data rates from kilobits per second to that approaching the modulator burst rate (hundreds of megabits per second) can be accommodated. The technique was developed for use in the NASA Lewis Research Center System Integration, Test, and Evaluation (SITE) facility. Some key features of the technique have also been implemented in the ground terminals developed at NASA Lewis for use in on-orbit evaluation of the Advanced Communications Technology Satellite (ACTS) high burst rate (HBR) system.

Budinger, James M.↗
NASA NTRS1992

Real-time demonstration hardware for enhanced DPCM video compression algorithm

The lack of available wideband digital links as well as the complexity of implementation of bandwidth efficient digital video CODECs (encoder/decoder) has worked to keep the cost of digital television transmission too high to compete with analog methods. Terrestrial and satellite video service providers, however, are now recognizing the potential gains that digital video compression offers and are proposing to incorporate compression systems to increase the number of available program channels. NASA is similarly recognizing the benefits of and trend toward digital video compression techniques for transmission of high quality video from space and therefore, has developed a digital television bandwidth compression algorithm to process standard National Television Systems Committee (NTSC) composite color television signals. The algorithm is based on differential pulse code modulation (DPCM), but additionally utilizes a non-adaptive predictor, non-uniform quantizer and multilevel Huffman coder to reduce the data rate substantially below that achievable with straight DPCM. The non-adaptive predictor and multilevel Huffman coder combine to set this technique apart from other DPCM encoding algorithms. All processing is done on a intra-field basis to prevent motion degradation and minimize hardware complexity. Computer simulations have shown the algorithm will produce broadcast quality reconstructed video at an average transmission rate of 1.8 bits/pixel. Hardware implementation of the DPCM circuit, non-adaptive predictor and non-uniform quantizer has been completed, providing realtime demonstration of the image quality at full video rates. Video sampling/reconstruction circuits have also been constructed to accomplish the analog video processing necessary for the real-time demonstration. Performance results for the completed hardware compare favorably with simulation results. Hardware implementation of the multilevel Huffman encoder/decoder is currently under development along with implementation of a buffer control algorithm to accommodate the variable data rate output of the multilevel Huffman encoder. A video CODEC of this type could be used to compress NTSC color television signals where high quality reconstruction is desirable (e.g., Space Station video transmission, transmission direct-to-the-home via direct broadcast satellite systems or cable television distribution to system headends and direct-to-the-home).

Bizon, Thomas P.↗
NASA NTRS1997

Detection of "noisy" chaos in a time series

Time series from biological system often displays fluctuations in the measured variables. Much effort has been directed at determining whether this variability reflects deterministic chaos, or whether it is merely "noise". The output from most biological systems is probably the result of both the internal dynamics of the systems, and the input to the system from the surroundings. This implies that the system should be viewed as a mixed system with both stochastic and deterministic components. We present a method that appears to be useful in deciding whether determinism is present in a time series, and if this determinism has chaotic attributes. The method relies on fitting a nonlinear autoregressive model to the time series followed by an estimation of the characteristic exponents of the model over the observed probability distribution of states for the system. The method is tested by computer simulations, and applied to heart rate variability data.

Non-NASA Center↗
NASA NTRS1997

Detection of chaotic determinism in time series from randomly forced maps

Time series from biological system often display fluctuations in the measured variables. Much effort has been directed at determining whether this variability reflects deterministic chaos, or whether it is merely "noise". Despite this effort, it has been difficult to establish the presence of chaos in time series from biological sytems. The output from a biological system is probably the result of both its internal dynamics, and the input to the system from the surroundings. This implies that the system should be viewed as a mixed system with both stochastic and deterministic components. We present a method that appears to be useful in deciding whether determinism is present in a time series, and if this determinism has chaotic attributes, i.e., a positive characteristic exponent that leads to sensitivity to initial conditions. The method relies on fitting a nonlinear autoregressive model to the time series followed by an estimation of the characteristic exponents of the model over the observed probability distribution of states for the system. The method is tested by computer simulations, and applied to heart rate variability data.

Non-NASA Center↗
NASA NTRS1985

FIFO Buffer for Asynchronous Data Streams

Variable-rate, asynchronous data signals from up to four measuring instruments or other sources combined in first-in/first-out (FIFO) buffer for transmission on single channel. Constructed in complementary metal-oxide-semiconductor (CMOS) logic, buffer consumes low power (only 125 mW at 5V) and conforms to aerospace standards of reliability and maintainability.

Bascle, K. P.↗
NASA NTRS1993

Real-time transmission of digital video using variable-length coding

Huffman coding is a variable-length lossless compression technique where data with a high probability of occurrence is represented with short codewords, while 'not-so-likely' data is assigned longer codewords. Compression is achieved when the high-probability levels occur so frequently that their benefit outweighs any penalty paid when a less likely input occurs. One instance where Huffman coding is extremely effective occurs when data is highly predictable and differential coding can be applied (as with a digital video signal). For that reason, it is desirable to apply this compression technique to digital video transmission; however, special care must be taken in order to implement a communication protocol utilizing Huffman coding. This paper addresses several of the issues relating to the real-time transmission of Huffman-coded digital video over a constant-rate serial channel. Topics discussed include data rate conversion (from variable to a fixed rate), efficient data buffering, channel coding, recovery from communication errors, decoder synchronization, and decoder architectures. A description of the hardware developed to execute Huffman coding and serial transmission is also included. Although this paper focuses on matters relating to Huffman-coded digital video, the techniques discussed can easily be generalized for a variety of applications which require transmission of variable-length data.

Bizon, Thomas P.↗