Search NASA⌕ Search

SEARCH · Search NASA

Results for “vinyl acetylene”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

8 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Characterization of the Minimum Energy Paths and Energetics for the Reaction of Vinylidene with Acetylene

The reaction of vinylidene (CH2C) with acetylene may be an initiating reaction in soot formation. We report minimum energy paths and accurate energetics for a pathway leading to vinyl-acetylene and for a number of isomers of C4H4. The calculations use complete active space self-consistent field (CASSCF) derivative methods to characterize the stationary points and internally contacted configuration interaction (ICCI) and/or coupled cluster singles and doubles with a perturbational estimate of triple excitations (CCSD(T)) to determine the energetics. We find an entrance channel barrier of about 5 kcal/mol for the addition of vinylidene to acetylene, but no barriers above reactants for the reaction pathway leading to vinyl-acetylene.

Walch, Stephen P.↗
NASA NTRS1994

Intermediates in the Formation of Aromatics in Hydrocarbon Combustion

The formation of the first benzene ring is believed to be the rate limiting step in soot formation. Two different mechanisms have been proposed for formation of cyclic C6 species. The first involves the reaction of two acetylenes to give CH2CHCCH (vinyl acetylene), the loss of a H to give CHCHCCH (n-C41-13) or CH2CCCH (iso-C4H3), and addition of another acetylene to n-C4H3, followed by ring closure to give phenyl radical. Miller and Melius argue that only n-C4H3 leads to phenyl radical and since iso-C4H3 is more stable than n-C4H3 this mechanism is unlikely. An alternative mechanism proposed by them is formation of benzene from the dimerization of two CH2CCH (propargyl) radicals (formed by the reaction of singlet methylene with C2H2). We report reaction pathways and accurate energetics (from CASSCF/internally contracted CI calculations) for the reactions of CH(pi-2) and CH2-1 with acetylene, the reaction of vinylidene with acetylene, and the reaction of n-C4H3 and iso-C4H3 with acetylene. These calculations identify two new reactive intermediates CHCHCH ( a A"-2 ground state in Cs symmetry; spin coupling is a doublet from three singly occupied orbitals) and CHCCH (B-3 ground state in C2 symmetry) from the reaction of CH with acetylene. These species dimerize with no barrier to form benzene and para-benzyne, respectively. CHCCH is proposed as a reactive intermediate which can add to benzene to give higher polynuclear aromatic hydrocarbons or fullerenes. The addition of a C3H2 unit releases two C-C bond energies and thus the resulting addition product contains sufficient energy to break several CH bonds leading to a reduction in the H to C ratio as the cluster size increases. It is found that iso-C4H3 adds to acetylene to initially give a fulvene radical but that this species rearranges to phenyl radical. Thus, the reaction of acetylene with iso-C4H3 does lead to phenyl radical and the cyclization pathway may also contribute to formation of the initial benzene ring.

Walch, Stephen P.↗
NASA NTRS1990

A laboratory investigation of the production and properties of molecular and radical species pertinent to planetary atmospheres

Vinylidene (H2C=C) is shown to be the largest photodecomposition channel in the direct photolysis of both C2H2 and C2H4. The chemistry of H2C=C as it relates to planetary atmospheres is discussed. The vinyl radical (C2H3), important in the acetylene chemistry cycle, has been directly observed spectroscopically and the kinetics of several key reactions of this species measured.

Fahr, Askar↗
DOE OSTI2024

Styrene Thermal Decomposition and Its Reaction with Acetylene under Shock Tube Pyrolysis Conditions: an Experimental and Kinetic Modeling Study

Styrene is an important compound for polymer production and a key intermediate in gas-phase kinetics of polycyclic aromatic hydrocarbons (PAHs). For the first time, the pyrolysis of styrene with and without the presence of acetylene is investigated in a single-pulse shock tube coupled to gas chromatography and mass spectrometry. For each reaction system, quantitative speciation profiles are probed within the temperature range of 1100-1730 K, nominal pressure of 20 bar, and reaction duration of similar to 4 ms. A kinetic model is built to simulate the results. The model explains how styrene is consumed under high-pressure pyrolytic conditions, how the secondary chemistry of intermediate products affect subsequent PAH formation, and how acetylene addition alters the reaction pathways. Throughout the temperature range, styrene breakdown is dominated by the bimolecular interaction between styrene and hydrogen atom, which produces benzene+vinyl or phenyl and ethylene through the stabilization of 2-phenylethyl and its subsequent dissociation. As a result, large amounts of phenyl accumulate, which react with styrene to form C14H12 species while simultaneously releasing H atoms through addition/elimination reactions. The reactivity of fuel consumption is preserved by the regeneration of H atoms as chain carriers. Several C14H10 compounds are formed as a result of the following breakdown of the C14H12 isomers, particularly stilbene, 1,1-diphenyl ethylene, and 9-methyl-9H-fluorene. The presence of acetylene as a co-reactant with styrene allows the Hydrogen-Abstraction-Acetylene-Addition (HACA) pathway to proceed from phenyl radical to enhance the production of phenylacetylene at very low temperatures and acenaphthylene. This hinders the formation of C14H12 isomers, exclusive products from pure styrene dissociation by competing with the styrene+phenyl routes.

Kinetic Modeling↗
NASA NTRS2007

Calculational and Experimental Investigations of the Pressure Effects on Radical - Radical Cross Combinations Reactions: C2H5 + C2H3

Pressure-dependent product yields have been experimentally determined for the cross-radical reaction C2H5 + C2H3. These results have been extended by calculations. It is shown that the chemically activated combination adduct, 1-C4H8*, is either stabilized by bimolecular collisions or subject to a variety of unimolecular reactions including cyclizations and decompositions. Therefore the "apparent" combination/disproportionation ratio exhibits a complex pressure dependence. The experimental studies were performed at 298 K and at selected pressures between about 4 Torr (0.5 kPa) and 760 Torr (101 kPa). Ethyl and vinyl radicals were simultaneously produced by 193 nm excimer laser photolysis of C2H5COC2H3 or photolysis of C2H3Br and C2H5COC2H5. Gas chromatograph/mass spectrometry/flame ionization detection (GC/MS/FID) were used to identify and quantify the final reaction products. The major combination reactions at pressures between 500 (66.5 kPa) and 760 Torr are (1c) C2H5 + C2H3 yields 1-butene, (2c) C2H5 + C2H5 yields n-butane, and (3c) C2H3 + C2H3 yields 1,3-butadiene. The major products of the disproportionation reactions are ethane, ethylene, and acetylene. At moderate and lower pressures, secondary products, including propene, propane, isobutene, 2-butene (cis and trans), 1-pentene, 1,4-pentadiene, and 1,5-hexadiene are also observed. Two isomers of C4H6, cyclobutene and/or 1,2-butadiene, were also among the likely products. The pressure-dependent yield of the cross-combination product, 1-butene, was compared to the yield of n-butane, the combination product of reaction (2c), which was found to be independent of pressure over the range of this study. The [ 1-C4H8]/[C4H10] ratio was reduced from approx.1.2 at 760 Torr (101 kPa) to approx.0.5 at 100 Torr (13.3 kPa) and approx.0.1 at pressures lower than about 5 Torr (approx.0.7 kPa). Electronic structure and RRKM calculations were used to simulate both unimolecular and bimolecular processes. The relative importance of C-C and C-H bond ruptures, cyclization, decyclization, and complex decompositions are discussed in terms of energetics and structural properties. The pressure dependence of the product yields were computed and dominant reaction paths in this chemically activated system were determined. Both modeling and experiment suggest that the observed pressure dependence of [1-C4H8]/[C4H10] is due to decomposition of the chemically activated combination adduct 1-C4H8* in which the weaker allylic C-C bond is broken: H2C=CHCH2CH3 yields C3H5 + CH3. This reaction occurs even at moderate pressures of approx.200 Torr (26 kPa) and becomes more significant at lower pressures. The additional products detected at lower pressures are formed from secondary radical-radical reactions involving allyl, methyl, ethyl, and vinyl radicals. The modeling studies have extended the predictions of product distributions to different temperatures (200-700 K) and a wider range of pressures (10(exp -3) - 10(exp 5) Torr). These calculations indicate that the high-pressure [1-C4H8]/[C4H10] yield ratio is 1.3 +/- 0.1.

Fahr, Askar↗
DOE OSTI2023

Acetylene Semi-Hydrogenation on a Perovskite Oxyhydride Surface: Insights from First Principles and Microkinetic Modeling

Although perovskite oxyhydrides (POHs) have shown promise as a support for selective hydrogenation, it is unknown if they themselves can catalyze alkyne semi-hydrogenation. Here, we use first-principles density functional theory, coupled with microkinetic modeling, to investigate acetylene semi-hydrogenation on a prototypical POH, cubic BaTiO 2.5 H 0.5 (BTOH). Two different mechanisms are examined on a representative surface of BTOH under the reaction conditions: both are based on the Horiuti–Polanyi mechanism, but the way of H 2 dissociation is different. In mechanism 1, a lattice hydride H atom and then a surface adsorbed H atom sequentially hydrogenate the adsorbed acetylene. In mechanism 2, two lattice hydride H atoms from the BTOH sequentially hydrogenate the adsorbed acetylene. In both mechanisms, the H atoms are replenished from gas phase H 2 dissociation. Using density functional theory (DFT), we have calculated pathways for these two mechanisms in hydrogenation of acetylene to ethylene, as well as further to ethane. Microkinetic modeling based on the DFT energetics indicates that at 523 K, hydrogenation to ethylene and ethane via mechanism 1 occurs at a rate up to two orders of magnitude faster than via mechanism 2. A selectivity analysis for the temperature range of 373–673 K shows that the product observed is essentially only ethylene within the more active mechanism 1. This is because at the steady state, there is a significant amount of surface anion vacancies that facilitate heterolytic H 2 dissociation and help stabilize a vinyl intermediate. In conclusion, the present findings suggest that POHs are capable of selective hydrogenation, thanks to their rich hydrogen surface-redox chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Measurements of Intermediate Species in Fuel-Rich Oxidation of Ethylene, Toluene, and n -Decane

Polycyclic aromatic hydrocarbons (PAHs) are important precursors to the formation of soot and are also pollutant emissions from combustion devices, including internal combustion engines. To understand the formation of PAHs, the low-molecular-weight hydrocarbon chemistry leading to their formation needs to be understood. Toward this goal, fuel-rich oxidation of three different hydrocarbons, i.e., ethylene, toluene, and n-decane, has been investigated in an atmospheric pressure flow reactor at varying temperatures (1000–1350 K), equivalence ratios (φ = 3.0–12.0), and residence times of 0.25–1.5 s. The major C 1 to C 7 intermediates, such as methane, acetylene, ethylene, allene, propyne, propylene, vinylacetylene, 1,3-butadiene, cyclopentadiene, benzene, and toluene, were quantified using a gas chromatograph equipped with a flame ionization detector. The experimental tendency of intermediate species formation, e.g., the dependence of temperature, equivalence ratio, and residence time, was similar in ethylene oxidation and n-decane oxidation. The concentrations of intermediate species up to C 4 were higher in ethylene/n-decane oxidation than toluene oxidation, while a nearly equal or larger amount of C5–C7 species was produced in toluene oxidation. The experimental data were compared with modeling results using a detailed chemical kinetic mechanism. The calculated data using the kinetic model were in agreement with the experimental results. Additionally, a comprehensive kinetic analysis on the reaction pathways of each species was conducted to assess the differences in the oxidation chemistry with the change in the structure of hydrocarbons. In particular, in-depth analysis of benzene formation was performed, elucidating that two benzene formation pathways were important in ethylene and n-decane oxidation: (1) H elimination of the 2,4-cyclohexadienyl radical produced from the isomerization of the 2,4-cyclopentadienylmethyl radical, and (2) dehydrogenation of cyclohexadiene produced from reactions of vinyl radical with 1,3-butadiene. In toluene oxidation, it was found that benzene was primarily produced from toluene through the replacement of the methyl group with hydrogen.

30 DIRECT ENERGY CONVERSION↗