Search NASA⌕ Search

SEARCH · Search NASA

Results for “visible emission”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

First measurement of S/XB values of Re I visible emission lines

A spectroscopic parameter, so called S/XB (the number of ionization events per photon or inverse photon efficiency), is experimentally determined for Re I visible emission lines (488.9, 527.1, and 527.6 nm) at an electron temperature range of ~2–8 eV in the PISCES-B linear plasma device. Our standard mass loss method was applied, where a pure Re sample was sputtered by Ar plasma. In addition, a new alloy method was developed, where a W-3.3 at% Re alloy sample was used. In the new method, the sputtered flux ratio of Re and W atoms is assumed to be the same as the elemental composition because of the very similar sputtering yields. In this work, good agreement in measured Re I S/XB values is obtained between the standard mass loss and new alloy methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Visible emission spectra of thermographic phosphors under x-ray excitation

Thermographic phosphors have been employed for temperature sensing in challenging environments, such as on surfaces or within solid samples exposed to dynamic heating, because of the high temporal and spatial resolution that can be achieved using this approach. Typically, UV light sources are employed to induce temperature-sensitive spectral responses from the phosphors. However, it would be beneficial to explore x-rays as an alternate excitation source to facilitate simultaneous x-ray imaging of material deformation and temperature of heated samples and to reduce UV absorption within solid samples being investigated. Here, the phosphors BaMgAl 10 O 17 :Eu (BAM), Y 2 SiO 5 :Ce, YAG:Dy, La 2 O 2 S:Eu, ZnGa 2 O 4 :Mn, Mg 3 F 2 GeO 4 :Mn, Gd 2 O 2 S:Tb, and ZnO were excited using incident synchrotron x-ray radiation. These materials were chosen to include conventional thermographic phosphors as well as x-ray scintillators (with crossover between these two categories). X-ray-induced thermographic behavior was explored through the measurement of visible spectral response with varying temperature. The incident x-rays were observed to excite the same electronic energy level transitions in these phosphors as UV excitation. Similar shifts in the spectral response of BAM, Y 2 SiO 5 :Ce, YAG:Dy, La 2 O 2 S:Eu, ZnGa 2 O 4 :Mn, Mg 3 F 2 GeO 4 :Mn, and Gd 2 O 2 S:Tb were observed when compared to their response to UV excitation found in literature. Some phosphors were observed to thermally quench in the temperature ranges tested here, while the response from others did not rise above background noise levels. This may be attributed to the increased probability of non-radiative energy release from these phosphors due to the high energy of the incident x-rays. These results indicate that x-rays can serve as a viable excitation source for phosphor thermometry.

42 ENGINEERING↗
DOE OSTI2022

High-resolution fiber imaging for pulsed power experiments

This work presents a novel approach for imaging the visible emissions from plasmas in pulsed power experiments using high-resolution plastic optical fibers. The diagnostic consists of a 2 mm diameter core commercial cable constructed of 13 000 individual acrylic fibers. The fibers are fused together to create a single high-resolution bundle. Different designs were investigated to cover a wide range of resolutions and fields of view (3–700 µm and 0.05–45 mm, respectively). The system was tested on the 1-MA Mykonos accelerator at Sandia National Laboratories and successfully imaged visible emission from a hybrid x-pinch target. Diagnostic development and preliminary results are presented.

Fulford, K. W. (ORCID:0000000309691832)↗
DOE OSTI2021

Polarized imaging of visible synchrotron emission from runaway electron plateaus in DIII-D

A new approach to estimate the pitch angle of highly energetic postdisruption runaway electrons is presented by imaging the polarized runaway electron synchrotron emission. The vertical to horizontal polarization ratio is found to range between 3 and 14 in image-average studies looking at repeated shots as well as the polarization in a single discharge. Numerical studies with guiding center and full orbit simulations performed with the SOFT and KORC codes are given and compared to the experiment. The pitch angle evolution analyzed using a 1D impurity diffusion model in combination with kinetic simulations is also presented. Furthermore, these studies find agreement in the magnitude of the pitch angle, but not in the temporal rate of change of pitch angle. The measured pitch angle evolution timescale of order 50 ms falls between a modeled timescale of 20 ms in an equilibrium model and >>100 ms in a nonequilibrium model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Large reductions in Permian Basin methane intensity shown in multi-year comparison of aerially-visible methane emissions

Spanning the US states of Texas and New Mexico, the Permian Basin has been a hotspot of methane emissions from oil and natural gas activity 1–4, although studies disagree over the magnitude of these emissions. The most comprehensive measurement campaigns published were conducted in 2019 1–5 .There have been large changes in the energy industry since then, including in the prices of oil and gas, both state and federal regulatory environments, investor and activist pressure over methane emissions, and the adoption of new technologies and policies by energy operators. Understanding how any or all of these might influence methane emissions is important for policy makers, oil and gas operators, and other stakeholders. We characterize the time evolution of Permian Basin methane emissions using a series of comprehensive aerial surveys conducted every year from 2020-2023 and compare them to the 2019 results cited above. To maintain comparability, all the data sets are from surveys using Insight M point source methane sensing technology. The scope of these surveys expanded over time: from 33-46% of wells, oil production, and gas production in 2020 to 60-65% in 2021, to 84% of wells and over 90% of both oil and gas production in 2023. These surveys by Insight M also include hundreds of gas processing plants and compressor stations as well as 1000s of km of gathering and transmission pipelines. Considering only the aerially detected portion of emissions (typically the majority of the total in such surveys 4), we find reductions of more than 70% in methane emissions intensity compared to the 2019 New Mexico-only Insight M survey, with variation depending on the year 3,4. Notably, although sources below 100 kg/hr contributed less than 10% of aerially measured emissions the 2019 New Mexico survey 3, these smaller sources constitute a larger proportion of total aerially measured emissions (although not the majority) in 2020-2023. Production facilities and gathering pipelines are responsible for the larges shares of total emissions, followed by compressor stations and gas processing plants. Permian methane emissions were also measured in a comprehensive 2019 Permian-wide survey by the Carbon Mapper team 2. That analysis led to a lower total emissions estimate at the time 4. These new Insight M-based emission rates are still roughly 30-70% lower than the aerially measured portion of the 2019 Carbon Mapper-based estimates 4. Further work is needed to harmonize these surveys in space and time to create the most intercomparable numbers possible 5. Additional analysis is needed to compare our findings to the more spatially constrained 2020, 2021, and 2023 Carbon Mapper surveys in the Permian 4,6. The evidence is strong from these two survey teams that emissions intensity has declined significantly since 2019. Reasons for this trend are currently unclear but point to possible success of emissions control programs. Future work investigating frequency, source, and operator-specific intensities could provide insights into the causes of this promising trend.

methane, oil and gas, data science, remote sensing↗
DOE OSTI2025

Visible Arc Emission Spectrometry During Pulsed-Current GMAW [Slides]

GBE Shielding Gas Disturbance Metric (GBESGDM) is sensitive to shielding gas disturbances caused by: (1) lack of shielding due to decreasing gas flow rate; (2) change in shielding gas composition; (3) dirty/contaminated base plate; and (4) changes in welding parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Capped co-doped core/shell nanocrystals for visible light emission

In various embodiments the present disclosure provides a core/shell nanocrystal comprising a core and a shell formed on the core, wherein the core/shell nanocrystal is co-doped with at least one metal dopant and at least one trivalent cation. In some embodiments, the trivalent cation is a Group 13 element. Methods of making and using the core/shell nanocrystal are also described.

Zhang, Jin Z.↗
DOE OSTI2024

Radiatively cooled magnetic reconnection experiments driven by pulsed power

We present evidence for strong radiative cooling in a pulsed-power-driven magnetic reconnection experiment. Two aluminum exploding wire arrays, driven by a 20 MA peak current, 300 ns rise time pulse from the Z machine (Sandia National Laboratories), generate strongly driven plasma flows (MA≈7) with anti-parallel magnetic fields, which form a reconnection layer (SL≈120) at the mid-plane. The net cooling rate far exceeds the Alfvénic transit rate (τcool−1/τA−1≫1), leading to strong cooling of the reconnection layer. We determine the advected magnetic field and flow velocity using inductive probes positioned in the inflow to the layer, and inflow ion density and temperature from analysis of visible emission spectroscopy. A sharp decrease in x-ray emission from the reconnection layer, measured using filtered diodes and time-gated x-ray imaging, provides evidence for strong cooling of the reconnection layer after its initial formation. X-ray images also show localized hotspots, regions of strong x-ray emission, with velocities comparable to the expected outflow velocity from the reconnection layer. These hotspots are consistent with plasmoids observed in 3D radiative resistive magnetohydrodynamic simulations of the experiment. X-ray spectroscopy further indicates that the hotspots have a temperature (170 eV) much higher than the bulk layer (≤75 eV) and inflow temperatures (about 2 eV) and that these hotspots generate the majority of the high-energy (>1 keV) emission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Liquid crystalline behavior and photoluminescence of lanthanide decanoate nanoparticles synthesized by microwave radiation

Luminescent lanthanide decanoate nanoparticles (LnC 10 NPs; Ln = Pr, Nd, Sm, Eu, Gd, Er) with spherical morphology (<100 nm) have been synthesized via a facile microwave (MWV) method using Ln(NO 3 ) 3 ·xH 2 O, ethanol/water, and decanoic acid. These hybrid nanomaterials adopt a lamellar structure consisting of inorganic Ln 3+ layers separated by a decanoate anion bilayer and exhibit liquid crystalline (LC) phases during melting. The particle size, crystalline structure, and LC behavior were characterized using transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and powder X-ray diffraction (ambient and heated). Thermal analysis indicated the formation of Smectic A LC phases by LnC 10 nanoparticles, with the smaller lanthanides (Ln = Sm, Gd, Er) displaying additional solid intermediate and Smectic C phases. The formation of LC phases by the smaller Ln 3+ suggests that these nanoscale materials have vastly different thermal properties than their bulk counterparts, which do not exhibit LC behavior. In this work, photoluminescence spectroscopy revealed the LnC 10 NPs to be highly optically active, producing strong visible emissions that corresponded to expected electronic transitions by the various Ln 3+ ions. Under long-wave UV irradiation (λ = 365 nm), bright visible luminescence was observed for colloidal suspensions of Nd, Sm, Eu, Gd, and ErC 10 NPs. To the best of the authors’ knowledge, this is the first reported synthesis of nanoscale metal alkanoates, the first report of liquid crystalline behavior by any decanoate of lanthanides smaller than Nd, and the first observation of strong visible luminescence by non-vitrified lanthanide alkanoates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Excitation Wavelength-Dependent Emission from Americium(III) in Mineral Acid Solutions

The photoluminescence behavior of trivalent americium, Am(III), in mineral acid solutions is reported under direct-metal excitation at seven high-energy wavelengths in the ultraviolet and visible regions (378-512 nm). This study revealed a dependence of the Am(III)-based visible emission profile on the chosen excitation wavelength. For example, excitation at the more common wavelength of 504 nm produces the two expected emission bands: one at approximately 600 nm (5D1' to 7F0') and another at 690 nm (5D1' to 7F1'). When the excitation wavelength is shifted to 398 nm (targeting the 5D3', 5H7' from 7F0' transitions), the emission occurs almost exclusively at 600 nm. This behavior is unexpected and potentially highlights fundamental knowledge gaps in the current understanding of the intraconfigurational 5f-5f electronic transitions that give rise to Am(III) photoluminescence. Although a full interpretation of these results is limited by the incomplete understanding of Am(III) speciation in mineral acid systems, this study explores several potential explanations for the observed behavior and challenges the widely held assumption of a single emissive Am(III) species.

Americium↗
DOE OSTI2024

Realization of a gas puff imaging system on the Wendelstein 7-X stellarator

A system for studying the spatiotemporal dynamics of fluctuations in the boundary of the W7-X plasma using the “Gas-Puff Imaging” (GPI) technique has been designed, constructed, installed, and operated. This GPI system addresses a number of challenges specific to long-pulse superconducting devices, such as W7-X, including the long distance between the plasma and the vacuum vessel wall, the long distance between the plasma and diagnostic ports, the range of last closed flux surface (LCFS) locations for different magnetic configurations in W7-X, and management of heat loads on the system’s plasma-facing components. The system features a pair of “converging–diverging” nozzles for partially collimating the gas puffed locally ≈135 mm radially outboard of the plasma boundary, a pop-up turning mirror for viewing the gas puff emission from the side (which also acts as a shutter for the re-entrant vacuum window), and a high-throughput optical system that collects visible emission resulting from the interaction between the puffed gas and the plasma and directs it along a water-cooled re-entrant tube directly onto the 8 × 16 pixel detector array of the fast camera. The DEGAS 2 neutral code was used to simulate the Hα (656 nm) and HeI (587 nm) line emission expected from well-characterized gas-puffs of H2 and He and excited within typical edge plasma profiles in W7-X, thereby predicting line brightnesses used to reduce the risks associated with system sensitivity and placement of the field of view. Operation of GPI on W7-X shows excellent signal-to-noise ratios (>100 at 2 Mframes/s) over the field of view for minimally perturbing gas puffs. The GPI system provides detailed measurements of the two-dimensional (radial and poloidal) dynamics of plasma fluctuations in the W7-X edge and scrape-off layer and in and around the magnetic islands outside the LCFS that make up the island divertor configuration employed on W7-X.

Instruments & Instrumentation↗
DOE OSTI2024

Photoluminescence and Raman spectroscopy of wide bandgap semiconductors damaged by deep-UV laser irradiation

The effects of a pulsed, focused, deep-UV (4.66 eV) laser on wide and ultra-wide bandgap semiconductors were investigated with photoluminescence (PL) and Raman spectroscopy. Three semiconductor single crystals were studied: silicon carbide (6H-SiC), gallium nitride (GaN), and gallium oxide (β-Ga 2 O 3 ). Atomic emission lines from neutral Ga or Si were observed during the laser-damage process. For all three semiconductors, PL mapping (3.49 eV laser excitation) of the damaged material revealed visible emission bands in the 2.6–2.8 eV range, attributed to point defects. Raman spectra (2.33 eV excitation) showed a reduction in the Raman peak intensities in the damaged region, along with weak PL bands around 1.9–2.1 eV.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Toward white light emission from plasmonic-luminescent hybrid nanostructures

We study the light emission of plasmonic-luminescent hybrid nanostructures consisting of Ag nanoparticles (NPs) embedded in europium oxide (EuO X ). The Ag NPs present a bidimensional organization in the nanostructures and they optically behave as oblate spheroids. The photoluminescence (PL) spectral response of the nanostructures evolves from a narrow red emission characteristic of Eu 3+ ions in absence of Ag NPs to a broad blue-green emission band associated with Eu 2+ ions when the layer of Ag NPs is present. This behavior is not related to a change in the Eu 2+ /Eu 3+ ratio, which is verified by compositional analysis. Instead, a detailed investigation of the PL emission of the nanostructures suggests that the coupling of the Ag NPs to the Eu 2+ ions present in the EuO X layer, which manifests itself in an efficient sensitization of these ions, enhances their broad visible emission. In particular, the longitudinal mode of the Ag NPs surface plasmon is considered to be responsible for the efficient energy transfer for the non-normal incidence excitation PL configuration used. Finally, the use of a capping amorphous Al 2 O 3 layer allows improving the robustness of hybrid nanostructures and further enhances their PL emission. These findings provide a new path to actively control the selective excitation of Eu 2+ and Eu 3+ ions via a controlled coupling with the surface plasmon resonance modes of the Ag NPs and points to these nanostructures as promising building blocks for the development of integrable white light sources.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Melting temperature, emissivity, and thermal conductivity of rare-earth silicates for thermal and environmental barrier coatings

In recent years, rare-earth silicates have become the industry standard for coating state-of-the-art SiC ceramic matrix composite (CMC) gas turbine engine components, due to their low volatility, high melting point, and thermal shock resistance. Current research is focused on designing rare-earth silicate based thermal-environmental barrier coatings (T/EBCs) with improved resistance to CMAS (CaO-MgO-Al 2 O 3 -SiO 2 ), steam, and crack formation, while maintaining high temperature performance and stability. Here, in this work we compare the high temperature performance of a variety of single and multi-component rare-earth mono- and disilicates (MS, DS) and rare earth apatites by measuring their melting points and spectrally averaged visible emissivities using laser heating and radiation pyrometry. We also report room temperature thermal conductivity measured by time-domain thermoreflectance (TDTR).

Environmental barrier coatings↗
DOE OSTI2020

Engineering of Lead Selenide Quantum Dot Based Devices and Core/Shell Heterostructures

Near infrared (NIR) emitting colloidal quantum dots (QDs) such as PbSe are interesting materials for implementation in various optoelectronic devices such as solar cells, photodetectors, and radiation detectors. Material properties like size tunable emission wavelengths, facile solution processability, the possibility of carrier multiplication and Auger assisted up-conversion, and high Z number provide PbSe QDs with unique advantages over many currently available commercial materials used in these devices. In this dissertation, after an introduction to QDs in general, we first focus on synthesis of PbSe-based heterostructured QDs for study via optical spectroscopy. PbSe/CdSe QDs synthesized via cation exchange reaction were used as seeds to study the proper conditions for further CdSe or CdS shell growth. Optical spectroscopy studies show that growth of thicker CdSe shells leads to tunable visible emission, while growth of thick CdS shells can greatly increase the photoluminescence quantum yield (PLQY) observed from the intermediate CdSe shell. NIR PL lifetimes can be greatly enhanced by the growth of CdS shells, due to strong delocalization of the hole wavefunction within the PbSe core, while the electron is delocalized throughout the QD including in the CdS shell, resulting in radiative lifetimes in the tens of microseconds. Two pulse delay measurements show that Auger assisted up conversion is also taking place in these engineered QD dot heterostructures. In the sections that follow, we look at QD devices, first with a focus on novel devices fabricated from PbSe QDs, using an amine synthesis method that allows for facile in-solution ligand exchange. QD film mobilities are measured for PbSe QDs capped with various short ionic ligands. Carrier densities in PbSe QD films are calculated from C-V measurements, showing for the first time that carrier densities can be modulated by simply changing the capping ligand. vii Radiation detectors utilizing PbSe QDs capped with KI and NH4I ligands show tangible response to incident alpha radiation. Current output response to alpha radiation is dependent on strength of radiation source and amount of bias voltage applied. In the final section a critical review of hybrid layered 2D-QD photodetectors is presented. In a typical example, PbSe and PbS QDs act as the absorbing layer in phototransistor devices which utilize layered 2D materials such as graphene and transition metal dichalcogenides as transport layers. Resulting devices display high gains and improved directivities compared to QD only and 2D only devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Size- and concentration-dependent Eu 2+ /Eu 3+ mixed luminescent characteristics of rare-earth-doped CaF 2 nanoparticles and their monolithic epoxy nanocomposites

CaF 2 is a promising luminescent host material for a wide range of applications, due to its high transparency, non-hygroscopy, low refractive index, low density, low backscattering efficiency, and abundance in nature. Here we report the photoluminescence (PL) and cathodoluminescence (CL) characteristics of rare-earth-doped CaF 2 nanoparticles and their composite monoliths with epoxy with visible emissions. The CaF 2 nanoparticles of ca. 36, 108 and 305 nm were prepared by a facile solution-mixing process and subsequent hydrothermal treatment. As the particle size decreases, the luminescence intensity increases for single-doped particles, while oppositely decreases for codoped particles because of energy transfer. Further, Eu 2+ - and Tb 3+ -codoped CaF 2 nanoparticles exhibit red emission, providing an efficient path for red emission through an energy transfer by Tb 3+ bridging without direct Eu 3+ doping. The effects of size and concentration are found to be pronounced in CL than PL, as the charge transfer between Eu 2+ and Eu 3+ reduces the concentration quenching in CL. The luminescence emission characteristics of epoxy/CaF 2 monoliths are different from those of particles due to the interactions with the epoxy molecules, and thus the energy transfer is hindered in PL while not in CL, enabling them for high-energy irradiation applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Covert MOF-Based Photoluminescent Tags via Tunable Linker Energetics

We report that the optical anticounterfeiting tags utilize the photoluminescent properties of materials to encode unique patterns, enabling identification and validation of important items and assets. These tags must combine optical complexity with ease of production and authentication to both prevent counterfeiting and to remain practical for widespread use. Metal–organic frameworks (MOFs) based on polynuclear, rare earth clusters are ideal materials platforms for this purpose, combining fine control over structure and composition, with tunable, complex energy transfer mechanisms via both linker and metal components. Here we report the design and synthesis of a set of heterometallic MOFs based on combinations of Eu, Nd, and Yb with the tetratopic linker 1,3,6,8-tetrakis(4-carboxyphenyl)pyrene. The energetics of this linker facilitate the intentional concealment of the visible emissions from Eu while retaining the infrared emissions of Nd and Yb, creating an optical tag with multiple covert elements. Unique to the materials system reported herein, we document the occurrence of a previously not observed 11-metal cluster correlated with the presence of Yb in the MOFs, coexisting with a commonly encountered 9-metal cluster. We demonstrate the utility of these materials as intricate optical tags with both rapid and in-depth screening techniques, utilizing orthogonal identifiers across composition, emission spectra, and emission decay dynamics. This work highlights the important effect of linker selection in controlling the resulting photoluminescent properties in MOFs and opens an avenue for the targeted design of highly complex, multifunctional optical tags.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗