Search NASA⌕ Search

SEARCH · Search NASA

Results for “volume fraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Low fractional volume superconductivity in single crystals of Pr{sub 4}Ni{sub 3}O{sub 10} under pressure

Magnetotransport measurements of P⁢r4⁢N⁢i3⁢O10 single crystals performed under externally applied pressures up to 73 GPa in diamond anvil cells with either KBr or Nujol oil as pressure media yield signatures of superconductivity with a maximum onset temperature of approximately 31 K. True zero resistance was not observed, consistent with a nonpercolating superconducting volume fraction. Magnetization measurements provided corroborating evidence of superconductivity, with a pressure-dependent diamagnetic signal occurring below the onset temperature, and an estimate from the absolute value of the susceptibility suggests a superconducting volume fraction on the order of 10%. We observe sample to sample variations in the magnitude and pressure dependence of 𝑇𝑐 as well as a dependence on the configuration of electrical contacts on a given sample. Possible causes of this behavior may be significant inhomogeneities in the pressure and/or damage to the samples induced by the pressure media as well as inhomogeneities in the crystals themselves. The results imply that our as-grown P⁢r4⁢N⁢i3⁢O10 single crystals are not bulk superconductors but that there is a minority structure present within the crystals that is indeed superconductin

Chen, Xinglong↗
DOE OSTI2024

Effect of the volume fraction gradient on the phase interaction force model for disperse two-phase flows

In this work, the effects of the particle volume fraction gradient on fluid-particle interactions are studied. The phase interaction force is decomposed into three terms. For the first term, namely the symmetrized force density, we present theoretical reasoning and numerical evidence to assume that it is independent of the particle volume fraction gradient. The second term is the particle volume fraction gradient times a newly introduced diffusion stress. The third term is the divergence of the particle-fluid-particle (PFP) stress. If this assumption of independence of the particle volume fraction gradient for the first term can be verified, to the first order of the ratio of the mean distance between particles to the macroscopic lengthscale, all three terms can be studied and modeled in flows with uniform particle distributions. Models thus obtained are applicable to statistically inhomogeneous flows, with the second and third terms accounting for statistical inhomogeneity. To verify this assumption, numerical simulations of flows passing fixed arrays of particles are performed. Both uniform and nonuniform particle volume fractions are studied and compared for disperse multiphase flows with the particle Reynolds numbers ranging from 1 to 100, and particle volume fraction ranging from 1% to 26% in statistically steady states. It is found that the symmetrized force (first) term can be well approximated by the drag force obtained from studies of uniform flows. The diffusion stress is positive along the flow direction and negative in the directions perpendicular to the flow. In the case of moving particles, this stress could potentially cause particle aggregation in the flow direction and dispersion in the directions perpendicular to the flow. Finally, the diffusion stress is only important when there is a volume fraction gradient, while the PFP stress can be important in inhomogeneous flows with either nonuniform particle concentrations or nonuniform average relative velocities between the phases.

42 ENGINEERING↗
DOE OSTI2025

An efficient second-order adaptive procedure for inserting CAD geometries into hexahedral meshes using volume fractions

Here, this paper is concerned with inserting three-dimensional computer-aided design (CAD) geometries into meshes composed of hexahedral elements using a volume fraction representation. An adaptive procedure for doing so is presented. The procedure consists of two steps. The first step performs spatial acceleration using a k-d tree. The second step involves subdividing individual hexahedra in an adaptive mesh refinement (AMR)-like fashion and approximating the CAD geometry linearly (as a plane) at the finest subdivision. The procedure requires only two geometric queries from a CAD kernel: determining whether or not a queried spatial coordinate is inside or outside the CAD geometry and determining the closest point on the CAD geometry’s surface from a given spatial coordinate. We prove that the procedure is second-order accurate for sufficiently smooth geometries and sufficiently refined background meshes. We demonstrate the expected order of accuracy is achieved with several verification tests and illustrate the procedure’s effectiveness for several exemplar CAD geometries.

Adaptive↗
DOE OSTI2025

Dimensionless Regime Mapping and Chaos Analysis of Solids Volume Fraction Data in a Circulating Fluidized Bed Riser

Presentation of experimental results of solids volume fraction data measurements in a 12-inch diameter cold flow circulating fluidized bed in relation to a dimensionless fluidization regime map. Statistical and chaotic system analysis results are shown to illustrate differences in hydrodynamic behavior at different operating conditions. Presentation was made at the ASTFE 10th Thermal and Fluids Engineering Conference, March 09-12, 2025.

chaos↗
DOE OSTI2025

Computing material volume fractions on a superimposed mesh as applied to Monte Carlo particle transport simulations

Here, we present a newly implemented ray tracing algorithm in OpenMC for efficiently computing material volume fractions on superimposed meshes in complex geometries. By firing rays along each coordinate direction through the geometry, the approach accumulates track-length data in each mesh element, thereby determining the fractional composition of each material. Scaling studies on three different models—a random tetrahedra configuration, the Frascati Neutron Generator ITER dose rate benchmark, and a stellarator design—show excellent parallel performance, with nearly linear speedup on modern multi-threaded and distributed-memory systems. An analysis of the residual error relative to high-resolution reference solutions demonstrated that under optimal conditions it decreases as 1/R, where R is the number of rays fired, making it straightforward to achieve user-prescribed accuracy. This new functionality enables practical, mesh-based approaches for detailed nuclear analyses in production Monte Carlo workflows without resorting to expensive, fully conformal or unstructured meshing.

Monte Carlo↗
DOE OSTI2025

The Role of Water Volume Fraction on Water Adsorption in Anion Exchange Membranes

Water absorption plays a key role in the performance of polymeric anion exchange membranes. It influences important properties such as ionic conductivity and mechanical strength and alters their performance as solid electrolytes in hydrogen electrochemical devices for energy conversion. However, computational approaches that address the relationship between the polymer design and the absorption process are scarce. In this work, we introduce a simple thermodynamic model to predict the water absorption isotherms of polyelectrolyte membranes in contact with a water vapor reservoir that incorporates the specific chemical design of the polymers. The model accurately predicts the water content and macrostructural properties of polynorbornene membranes as a function of the water activity and successfully captures the effect of various polymer design parameters. The energy of pairwise attractive interactions predicted by our model provides a means to interpret the absorption process at the molecular level. The model also reveals the most significant favorable and unfavorable contributions to the free energy and indicates that their balance is solely governed by the water volume fraction, regardless of the polymer design. This universal behavior leads to important implications in the search for better ion exchange membranes.

Zaldivar, Gervasio [New York University, Brooklyn,↗
DOE OSTI2025

Single and Dual-Solute Transport in Quaternary Ammonium-Functionalized Anion Exchange Membranes: Isolating the Impact of Water Volume Fraction

Membranes are essential components of photoelectrochemical CO 2 reduction cells (PEC-CRC), as they regulate solute transport and impact device efficiency. These cells are a promising approach for converting carbon dioxide into valuable chemicals. However, electrochemical reactions involve not just a single electrolyte; membrane transport typically includes multiple electrolytes. When a mixture of solutes is present, the presence of one solute in the membrane can impact the diffusion and sorption of other solutes. In complex systems where multiple solutes are diffusing simultaneously through a hydrated, dense polymer membrane, the resulting transport behavior is poorly understood. This study highlights the individual and two solute transport behavior of potassium formate, acetate, and bicarbonate ions in neutral membranes and quaternary ammonium-functionalized anion exchange membranes (AEMs) based on phenyl acrylate polymer backbones. By isolating the effect of water content, we emphasize how fixed charge density and solute-membrane interactions influence transport behavior. In neutral membranes, the diffusivity follows the order of potassium formate > potassium acetate > potassium bicarbonate. However, in AEMs, the order shifts due to changes in ion-membrane interactions, with potassium bicarbonate diffusivity surpassing that of potassium acetate. These results underscore the importance of ion exchange membranes and ion-membrane interaction in modulating transport properties, providing valuable insights for optimizing membranes in electrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Shape effects on the local dynamics of suspensions of spheroidal particles

The effect of shape on the dynamics of suspensions of non-spherical heavy particles is examined by fully resolved numerical simulations of oblate and prolate spheroids, as well as spheres, for a density ratio of ten, volume fractions ranging from 0.5% to 5%, and Reynolds numbers between 20 and 30. The dynamics is determined both by the interactions of the particles with the fluid as well as by collisions, with the number and importance of collisions increasing with volume fractions. A single isolated oblate or prolate spheroid falling under gravity generally falls broadside on, for the governing parameters examined here, and at low-volume fractions, the majority of particles in a suspension fall that way. At higher-volume fractions, the orientation is more random. The slip velocity decreases as the volume fraction increases for all shapes, as expected, but the effect of the shape is much less than seen for a single particle. Furthermore, this seems to be due to two effects. For all volume fractions, the most deformed particles cluster more than spheres and less deformed particles, which increases their slip velocity. As the concentration increases, the increased particle interactions also causes more particles to fall short side-on, which reduces the frontal area and the resulting drag, increasing the slip velocity. This second effect is, of course, absent for spherical particles.

42 ENGINEERING↗
DOE OSTI2025

A Geometric Volume of Fluid-Based Multiphase Flow Solver Extension to the Reacting Flow Solver, PeleLM

A new algorithm is presented to simulate multiphase flows with surface tension in a pathway for spray combustion simulation. The algorithm combines capabilities from two open-source packages, including the interface reconstruction library (IRL), a library of computational geometry routines to enable the volume of fluid (VOF) method, and PeleLM, a solver for the reacting Navier-Stokes equations. Additionally, surface tension is implemented using the continuum surface force (CSF) model with an improved height function technique in the volume fraction field. Spurious errors in volume fraction arising from our combined strategy are corrected through a topology-based method that improves both numerical stability and accuracy. Multiple validation simulations are conducted, including (i) translations and rotations of Zalesak's disk, (ii) a stationary circular droplet with surface tension, (iii) an oscillating elliptical droplet, and (iv) three-dimensional deformation of a spherical droplet. Results indicate that the combined scheme retains the favorable properties of each of the component algorithms.

42 ENGINEERING↗
DOE OSTI2025

Material extrusion with integrated compression molding of NdFeB/SmFeN nylon bonded magnets using small- and large-scale pellet-based 3D-printers

High-density bonded rare-earth magnets are manufactured using pellet-fed additive manufacturing (AM)/material extrusion and an integrated additive manufacturing-compression molding (AM-CM) process. Neodymium iron boron – samarium iron nitride in polyamide 12 (NdFeB-SmFeN/PA12) of 93 % weight fraction (65 % volume fraction) are used for the study. The mechanical properties (tensile strength and modulus), magnetic properties (maximum energy density, coercivity, remanence) are reported. Manufacturing parameters such as layer height, barrel temperatures, screw speed and gantry feed rate are optimized to obtain the highest possible density of the magnets using a small-scale desktop material extrusion printer. Large scale integrated additive manufacturing-compression molding (AM-CM) is then utilized to increase the density of the magnets by reducing porosity defects common in the material extrusion process. The density of as-printed magnets was 5.2 g/cm 3 with a BH max value of 124.14 kJ/m 3 , tensile strength of 20 MPa and a modulus of 2 GPa. AM-CM increased the density of the compound by 5.5 % (5.49 g/cm 3 ). The reduction in porosity was confirmed using X-ray tomography (XCT). Improvement in mechanical strength of the material was also observed, with an increase in tensile strength of 25 % (25.09 MPa) and increase in tensile modulus of 275 % (5.49 GPa). Scanning electron microscopy showed increased particle-matrix adhesion with the integrated AM-CM process.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Interface instabilities in hafnium hydride entrained iron metal matrix composites

The chemical interactions in Fe–HfH 2 metal matrix composites (MMCs) are studied across multiple length scales to elucidate the decomposition of the parent phases and corresponding reaction zone physics during direct current sintering. Fe–HfH 2 composites were synthesized with increasing as-mixed hydride contents of Fe–25% HfH 2 , Fe–40% HfH 2 , Fe–55% HfH 2 , and Fe–70% HfH 2 (all in vol. %) to demonstrate the ability to achieve sintered MMCs with target hydride contents. Samples were probed across multiple length scales through a multi-modal workflow employing x-ray diffraction, scanning electron microscopy and segmentation analysis, and synchrotron techniques including hard x-ray fluorescence mapping and nanoprobe x-ray absorption near-edge structure measurements. Under the selected sintering temperature and pressure conditions, hydrogen evolution is seen to evolve through parallel paths: thermal decomposition from during the transformation of HfH 2 to HfH x<2 and through subsequent reaction with the Fe matrix leading to intermetallic phase formation. Specifically, HfFe and HfFe 2 intermetallic formation accelerates the release of hydrogen with a subsequent HfO 2 phase forming at grain boundaries. For this MMC, the consumption or loss of hydrogen can be considerable in compacts with initial hydride loading of 25%–40% HfH 2 approaching 83% hydrogen loss for the lower volume fraction composites. Increasing the volume fraction of HfH 2 to 70% enhanced the retained hydrogen content to 53% and attributed to the reduced interfacial area intrinsic to the increased HfH 2 loading in this MMC.

36 MATERIALS SCIENCE↗
DOE OSTI2024

In situ study of microstructure evolution and α → ω phase transition in annealed and pre-deformed Zr under hydrostatic loading

The detailed study of the effect of the initial microstructure on its evolution under hydrostatic compression before, during, and after the irreversible α → ω phase transformation and during pressure release in Zr using in situ x-ray diffraction is presented. Two samples were studied: one is plastically pre-deformed Zr with saturated hardness and the other is annealed. Phase transformation α → ω initiates at lower pressure for a pre-deformed sample but for a volume fraction of ω Zr, c > 0.7, a larger volume fraction is observed for the annealed sample. This implies that the proportionality between the athermal resistance to the transformation and the yield strength in the continuum phase transformation theory is invalid; an advanced version of the theory is outlined. Phenomenological plasticity theory under hydrostatic loading is outlined in terms of microstructural parameters, and plastic strain is estimated. During transformation, the first rule is suggested, i.e., the average domain size, microstrain, and dislocation density in ω Zr for c < 0.8 are functions of the volume fraction, c of ω Zr only, which are independent of the plastic strain tensor prior to transformation and pressure. The microstructure is not inherited during phase transformation. Surprisingly, for the annealed sample, the final dislocation density and the average microstrain after pressure release in the ω phase are larger than for the severely pre-deformed sample. The results suggest that an extended experimental basis is required for the predictive models for the combined pressure-induced phase transformations and microstructure evolutions.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Compressive Response and Energy Absorption of Additively Manufactured Elastomers with Varied Simple Cubic Architectures

Additive manufacturing, and particularly the vat photopolymerization process, enables the fabrication of complex geometries at high resolution and small length scales, making it well-suited for fabricating cellular structures (e.g., foams and lattices). Among these, elastomeric cellular structures are of growing interest due to their tunable compliance and energy dissipation. However, comprehensive data on the compressive behavior of these structures remains limited, especially for investigating the structure-property effects from changing the density and distribution of material within the cellular structure. This study explores how the mechanical response of polyurethane-based simple cubic structures changes when varying volume fraction, unit cell length, and unit cell patterning, which have not been systematically investigated previously in additively manufactured elastomers. Increasing volume fraction from 10% to 50% yielded significant changes in compressive stress–strain performance (decreasing strain at 0.5 MPa by 41.6% and increasing energy absorption density by 3962.5%). Although changing the unit cell length between 2.5 and 7 mm in ~30 mm parts did not result in statistically different stress–strain responses, modifying the configuration of struts of different thicknesses across designs with 30% volume fraction altered the stress–strain behavior (differences of 12.5% in strain at 0.5 MPa and 109.4% for energy absorption density). Power law relationships were developed to understand the interactions between volume fraction, unit cell length, and elastic modulus, and experimental data showed strong fits (R 2 > 0.91). These findings enhance the understanding of how multiple structural design aspects influence the performance of elastomeric cellular materials, providing a foundation for informing strategic design of tailorable materials for diverse mechanical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of stress on Laves phase precipitation in creep ruptured Grade 92 ferritic martensitic steel characterized by a novel accessible method

At high temperature conditions relevant to fossil and nuclear energy plants, Laves phase (Fe 2 X, X=Mo, W) precipitation is observed in common ferritic martensitic (FM) structural steels, with various reported effects on creep behavior. Despite being valuable metrics to correlate with mechanical properties and other precipitate phases, the volume fraction and number density of Laves phase precipitates has been difficult to quantify accurately using common techniques such as transmission electron microscopy (TEM) due to the relatively large size (∼0.25 μm) and low number density (∼10 11 cm −3 ) of Laves precipitates. Here, to address this characterization challenge, we developed and demonstrated a high-throughput and widely accessible method to quantify the volume fraction and number density of the Laves phase based on scanning electron microscope (SEM) images with a backscattered electron signal and the information depth (ID) of backscattered electrons. We applied this new technique in creep ruptured Grade 92 FM steel to study the effect of Laves phase on creep properties and determine the influence of stress on Laves phase precipitation. The quantitative accuracy of the SEM-based volume fraction and number density values was verified using synchrotron high energy X-ray diffraction and serial sectioning tomography. Stress did not significantly affect the Laves phase size or volume fraction during creep testing at 550 – 650°C and stress levels of 90 – 260 MPa (vs. unstressed conditions). Conversely, a moderate but statistically significant stress-enhanced increase in Laves phase number density, corresponding to an increase in nucleation rate, occurred during creep exposure above 110 MPa.

Creep↗
DOE OSTI2025

Multi-material ALE remap with interface sharpening using high-order matrix-free finite element methods

The arbitrary Lagrangian-Eulerian (ALE) technique involves remapping field quantities from a Lagrangian mesh to an optimized mesh in a conservative, accurate and bounds-preserving manner. For methods based on arbitrary order finite elements, as described in a reference, material volume fractions are advected in pseudo-time using flux-corrected transport (FCT) without any form of interface reconstruction. In practice, this can lead to excessive propagation of small volume fractions throughout the domain. In addition, this method requires assembly of a global advection matrix to compute the bounds-preserving low-order FCT solution. In this work, we introduce a new approach for ALE remap using a high-order matrix-free technique which incorporates a flux modification to sharpen material interfaces in a conservative manner. Our approach begins with computing a bounds-preserving low-order solution to the ALE remap equations at the element level. We then compute a sharp interface solution (not guaranteed to be bounds-preserving) which comes from solving an augmented version of the ALE remap equations with a conservative flux modification which acts to sharpen material volume fractions based on their gradients and transport directions. Using the sharp interface solution, we make global corrections to the bounds-preserving solution while maintaining preservation of bounds. By blending with the sharpened solution at the global level we are able to globally conserve mass without hindering the remap pseudo-time step. This new interface-aware ALE remap method is based entirely on partial assembly techniques where globally assembled matrix operators are no longer needed, resulting in a globally matrix-free FCT method for multi-material, multi-field ALE remap with high performance on GPU architectures. We present results of our new remap method on 1D, 2D and 3D benchmarks and describe the algorithmic tailoring for GPU architectures that was developed.

Vargas, Arturo [Lawrence Livermore National Labora↗
DOE OSTI2026

Emergence of complex-regular eutectic patterns in Al–Ge: Observations from correlative nano-imaging

Eutectic solidification exemplifies nonequilibrium pattern formation, making it a well-studied moving boundary problem. Yet the mechanisms behind the formation of complex-regular microstructures – particularly in highly anisotropic systems with a significant volume fraction of a faceted phase – remain poorly understood. Our understanding of such systems is made complicated by the nonlinear interface kinetics and unique growth dynamics characteristic of faceted phases. To address these challenges, we investigate a model Al–Ge eutectic system, where the faceted Ge phase constitutes a substantial volume fraction (~0.35) and where the two solid phases arrange into so-called “fishbone” or “feather” complex-regular patterns. Using synchrotron-based x-ray nano-imaging and nanotomography with high spatial resolution (22 nm per pixel), we capture in real-time the evolution of the solid–liquid interfaces and the resulting three-dimensional microstructures in this faceted/non-faceted eutectic system. By integrating these observations with electron backscattered diffraction, we elucidate the crystallographic biases on the solidification process and the mechanisms driving the formation of such complex-regular microstructures. These findings inform a new growth model for irregular eutectics in (near-)symmetrical phase diagrams, offering insight on advanced microstructural design and processing strategies. More broadly, we demonstrate how interfacial curvature is generated in irregular eutectic alloys and how it depends on the volume fraction of the faceted phase.

36 MATERIALS SCIENCE↗