SEARCH · Search NASA

Results for “wall-normal vortex”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

6 records

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Particle removal from a flat surface using a translating bounded vortex flow

A bounded vortex flow is a hydrodynamic approach for removal of particles from a surface without scattering the particles onto nearby surfaces. The bounded vortex flow field is generated by a nozzle that combines azimuthally tilted jets arranged in a circular pattern and a central suction port. When the nozzle face is directed toward an ‘impingement surface’, the flow develops a wall-normal intake vortex below the suction outlet, which causes high shear stress on the impingement surface. When particles are present on the impingement surface, the high shear stress causes particles to roll along the surface and to be lifted off the surface and transported up the core of the wall-normal vortex into the suction outlet. In typical applications, the nozzle would be translated along the impingement surface to clean particles from the surface. The current paper reports on an experimental study of the effect of nozzle translation on the effectiveness of the bounded vortex flow field for particle mitigation. The effectiveness of particle mitigation was examined as a function of flow rate through the nozzle, particle size, and nozzle translation velocity relative to the impingement surface. As a result, numerical computations are used to relate the flow rate to the maximum shear stress on the impingement surface, which is then used to theoretically predict onset of particle motion.

42 ENGINEERING↗

DOE OSTI2020

Some observations concerning "laminarization" in heated vertical tubes

For low "turbulent" Reynolds numbers in strongly-heated vertical gas flow, fundamental results of existing direct numerical simulation (DNS) databases have been examined to deduce differences between cases which "revert" to turbulent and those that yield integral parameters which correspond to laminar flow (henceforth laminarizing or laminarized). The objectives of this paper are (1) to examine the streamwise evolution of near-wall flow structures and (2) to determine which, if any, proposed laminarization parameters could be used to discriminate between turbulent and laminarizing flows resulting. Views of streamlines in r-θ cross sections showed evidence of a ring of irregular-shaped streamwise vortices near the wall at all locations. The transverse advection of these vortices is hypothesized to provide a path of least resistance to the transport of streamwise momentum in the wall-normal direction. It is demonstrated that a steady streamwise laminar vortex can provide apparent turbulent momentum transport (as a consequence of the Reynolds decomposition) such that a reasonable mean velocity profile is predicted near the wall. For the present cases, the values of the non-dimensional radius (y c,w + = Re τ,w ) and of the modified wall Reynolds number did discriminate whether turbulent or laminarizing flow resulted.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2025

Effect of nozzle translation on a bounded vortex flow

A bounded vortex flow is generated by a nozzle that combines azimuthally tilted downward jets in a circular array and a central suction port. When the nozzle is directed toward a bottom surface (called the impingement surface), the flow develops a strong intake vortex spanning from the impingement surface to the suction port, which acts to generate strong shear stress on the impingement surface. This strong shear stress can aid in removing particles attached to the impingement surface or in enhancement of heat or mass transfer, where in typical applications, the nozzle would be translated along the impingement surface. This paper reports on a computational study of the effect of nozzle translation on the bounded vortex flow field. The nozzle translation induces a bending of the bounded vortex in the downstream flow direction, which becomes larger with increase in the nozzle translation speed. We identify an interesting oscillatory phenomenon by which the bounded vortex can resist the bending induced by the translational flow and rotate about a mean position downstream of the suction port. At sufficiently high translation speeds, the oscillatory process can no longer resist the downwash effect from nozzle translation and the vortex eventually detaches from the impingement surface, limiting the effectiveness of this flow device.

42 ENGINEERING↗

DOE OSTI2023

Mesh and model requirements for capturing deep-stall aerodynamics in low-Mach-number flows

Here, this work presents a comprehensive computational fluid dynamics investigation of the effects of grid resolution and turbulence-model choice for capturing the unsteady three-dimensional aerodynamic performance of NACA 0012 and 0021 airfoils, with specific focus on the deep-stall regime. At high angles of attack (α), wind turbine blades routinely experience vortex-induced vibrations, which can cause significant structural damages. Accurate predictions of post-stall aerodynamics can identify the frequencies at which such vibrations maybe triggered. In this context, the NACA 0012 airfoil simulations are conducted at a chord-based Reynolds number, Re c =2×10 6 , with the k-ω Shear-Stress Transport Reynolds-Averaged Navier-Stokes (RANS) and Improved Delayed Detached Eddy Simulation (IDDES) hybrid RANS-Large Eddy Simulation turbulence models. The effect of mesh resolution both in the wall-normal and spanwise directions is investigated. Only the IDDES model with a minimum spanwise resolution of 24 cells per chord length correctly predicts the aerodynamic forces. Spectral analysis shows the peak primary shedding frequency at α=30°, which signifies the end of the stall region. In the post-stall regime, both lift and drag frequencies drop asymptotically with increasing α. The Strouhal number, based on normalised chord length, remains nearly constant in this region. Based on this study, NACA 0021 airfoil runs are performed with IDDES for Re c =2.7×10 5 and 2.0×10 6 on the finest wall-normal mesh and three spanwise grids. Simulations conducted on the finer spanwise grids demonstrate grid independence and show good agreement with experiments. The effect of varying Rec on the airfoil frequency statistics is investigated. Additionally, comparison studies are presented to investigate the impact of airfoil thickness on the frequency content at Re c =2.0×10 6 . The results from the study provide guidance on the choice of mesh resolution with the IDDES model to accurately capture aerodynamic quantities for complex industrial applications.

17 WIND ENERGY↗

DOE OSTI2021

Life cycle of streaks in the buffer layer of wall-bounded turbulence

In this work, streaks in the buffer layer of wall-bounded turbulence are tracked in time to study their life cycle. Spatially and temporally resolved direct numerical simulation data are used to analyze the strong wall-parallel movements conditioned to low-speed streamwise flow. The analysis of the streaks shows that there is a clear distinction between wall-attached and detached streaks, and that the wall-attached streaks can be further categorized into streaks that are contained in the buffer layer and the ones that reach the outer region. The results reveal that streaks are born in the buffer layer, coalescing with each other to create larger streaks that are still attached to the wall. Once the streak becomes large enough, it starts to meander due to the large streamwise-to-wall-normal aspect ratio, and consequently the elongation in the streamwise direction, which makes it more difficult for the streak to be oriented strictly in the streamwise direction. While the continuous interaction of the streaks allows the superstructure to span extremely long temporal and length scales, individual streak components are relatively small and short-lived. Tall-attached streaks eventually split into wall-attached and wall-detached components. These wall-detached streaks have a strong wall-normal velocity away from the wall, similar to ejections or bursts observed in the literature. Conditionally averaging the flow fields to these split events show that the detached streak has not only a larger wall-normal velocity compared to the wall-attached counterpart, it also has a larger (less negative) streamwise velocity, similar to the velocity field at the tip of a vortex cluster.

42 ENGINEERING↗

DOE OSTI2023

Numerical Investigation of Wall-Cooling Effect on Aero-Optical Distortions for Hypersonic Boundary Layer

Compressible wall-modeled large-eddy simulations of Mach 8 turbulent boundary-layer flows over a flat plate were carried out for the conditions of the hypersonic wind tunnel at Sandia National Laboratories. The simulations provide new insight into the effect of wall cooling on the aero-optical path distortions for hypersonic turbulent boundary-layer flows. Four different wall-to-recovery temperature ratios, 0.3, 0.48, 0.71, and 0.89, are considered. Despite the much lower grid resolution, the mean velocity, temperature, and resolved Reynolds stress profiles from the simulation for a temperature ratio of 0.48 are in good agreement with those from a reference direct numerical simulation. The normalized root-mean-square optical path difference obtained from the present simulations is compared with that from reference direct numerical simulations, Sandia experiments, as well as predictions obtained with a semi-analytical model by Notre Dame University. Here the present analysis focuses on the effect of wall cooling on the wall-normal density correlations, on key underlying assumptions of the aforementioned model such as the strong Reynolds analogy, and on the elevation angle effect on the optical path difference. Wall cooling is found to increase the velocity fluctuations and decrease the density fluctuations, resulting in an overall reduction of the normalized optical path distortion. Compared to the simulations, the basic strong Reynolds analogy overpredicts the temperature fluctuations for cooled walls. Also different from the strong Reynolds analogy, the velocity and temperature fluctuations are not perfectly anticorrelated. Finally, as the wall temperature is raised, the density correlation length, away from the wall but inside the boundary layer, increases significantly for beam paths tilted in the downstream direction.

42 ENGINEERING↗