Search NASA⌕ Search

SEARCH · Search NASA

Results for “wave model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Reynolds stress closure in jet flows using wave models

A wave model was developed for the two dimensional shear layer. This configuration is being used as a test case for the closure schemes. Numerical methods are under development to solve the nonseparable Rayleigh equation. A model problem is being used to assist in the algorithm development. An analytic solution of the Rayleigh equation for a basic elliptic flow was obtained. This will be used to verify the stability codes developed for arbitrary geometries. Other numerical methods for solving the Rayleigh equation based on the boundary element technique are being examined.

Morris, P. J.↗
NASA NTRS1979

A brief summary of verification results for the spectral ocean wave model /SOWM/ by means of wave height measurements obtained by Geos 3

Significant wave heights calculated using a computer-based spectral ocean wave model (Pierson et al., 1966; Salfi, 1974; Lazanoff and Stevenson, 1975) from meteorological data have been compared with significant wave heights measured by Geos 3 for 44 orbit segments obtained during 1975 and 1976. The model specifications were found to be biased too low. Discrepancies between calculated and measured wave heights are also attributable to the poor specifications of the winds over the northern hemisphere oceans.

Pierson, W. J.↗
NASA NTRS1978

Verification results for the Spectral Ocean Wave Model (SOWM) by means of significant wave height measurements made by the GEOS-3 spacecraft

Significant wave heights estimated from the shape of the return pulse wave form of the altimeter on GEOS-3 for forty-four orbit segments obtained during 1975 and 1976 are compared with the significant wave heights specified by the spectral ocean wave model (SOWM), which is the presently operational numerical wave forecasting model at the Fleet Numerical Weather Central. Except for a number of orbit segments with poor agreement and larger errors, the SOWM specifications tended to be biased from 0.5 to 1.0 meters too low and to have RMS errors of 1.0 to 1.4 meters. The much fewer larger errors can be attributed to poor wind data for some parts of the Northern Hemisphere oceans. The bias can be attributed to the somewhat too light winds used to generate the waves in the model. Other sources of error are identified in the equatorial and trade wind areas.

Pierson, W. J.↗
NASA NTRS2018

Implementation of the University of Miami Wave Model (UMWM) into the NASA/GMAO Goddard Earth Observing System Model (GEOS)

Wind generated waves are integral element in air-sea interactions and affect exchange of momentum, heat, water, gases and production of marine aerosol. Motivated by the need to resolve the air-sea interface we have implemented the University of Miami Wave model (UMWM) into the NASA/GMAO Goddard Earth Observing System Model (GEOS). The implementation of the wave model in GEOS aimed to facilitate coupling with the atmosphere and ocean model components with minimal changes to the existing system, while at the same time ensure correctness of the predicted wave energy spectrum and wave diagnostics. Here we describe the implementation of the GEOS/UMWM system and show results from model experiments and verifications. This work is a step toward development of a coupled atmosphere-wave-ocean GEOS system.

Darmenov, Anton↗
NASA NTRS1961

Concerning Certain Collisionless Plasma-Shock Wave Models

A shock-wave model proposed by both Kahn and Parker for the collision of two interstellar gas clouds or of the solar wind with the ionized gas around the earth is re-evaluated in the light of recent developments in plasma stability theory. It is shown that the instability which was supposed to arrest the counter-streaming of the ions and to transfer much of their kinetic energy to the electrons does not occur in many important examples. Specifically, it is absent if the initial ion thermal energy exceeds 4.2 x 10 (sup -4) times their translational energy. While other plausible shock structures are known which yield supra-thermal electrons, they depend on magnetic fields, leaving no satisfactory theory in the limit of zero magnetic field.

Noerdlinger, Peter D.↗
NASA NTRS1992

Validation and assimilation of Seasat altimeter wave heights using the WAM wave model

The third-generation wave model, WAM, is presently used to investigate the mutual consistency of the Seasat global data sets of scatterometer winds and altimeter wave heights for the complete Seasat period. While modeled and observed wave heights are in reasonable agreement on the global average, regional differences can be great and on occasion exceed 40 percent. These errors are primarily attributable to forcing wind field deficiencies; the friction velocities of the Goddard Laboratory for Atmospheres are found to be significantly underestimated in the high-wind belt of the Southern Hemisphere. A wave data assimilation scheme is presented in which the wave field is updated without change to the forcing wind field.

Bauer, Eva↗
NASA NTRS2009

Comparison of Transmission Line Methods for Surface Acoustic Wave Modeling

Surface Acoustic Wave (SAW) technology is low cost, rugged, lightweight, extremely low power and can be used to develop passive wireless sensors. For these reasons, NASA is investigating the use of SAW technology for Integrated Vehicle Health Monitoring (IVHM) of aerospace structures. To facilitate rapid prototyping of passive SAW sensors for aerospace applications, SAW models have been developed. This paper reports on the comparison of three methods of modeling SAWs. The three models are the Impulse Response Method (a first order model), and two second order matrix methods; the conventional matrix approach, and a modified matrix approach that is extended to include internal finger reflections. The second order models are based upon matrices that were originally developed for analyzing microwave circuits using transmission line theory. Results from the models are presented with measured data from devices. Keywords: Surface Acoustic Wave, SAW, transmission line models, Impulse Response Method.

Wilson, William↗
NASA NTRS1993

A solution scheme for the Euler equations based on a multi-dimensional wave model

A scheme for the solution of scalar advection on an unstructured mesh has been developed, tested, and extended to the Euler equations. The scheme preserves a linear function exactly, and yields nearly monotone results. The flux function associated with the Euler scheme is based on a discrete 'wave model' for the system of equations. The wave model decomposes the solution gradient at a location into shear waves, entropy waves and acoustic waves and calculates the speeds, strengths and directions associated with the waves. The approach differs from typical flux-difference splitting schemes in that the waves are not assumed to propagate normal to the faces of the control volumes; directions of propagation of the waves are instead computed from solution-gradient information. Results are shown for three test cases, and two different wave models. The results are compared to those from other approaches, including MUSCL and Galerkin least squares schemes.

Powell, Kenneth G.↗
NASA NTRS1990

Chromospheric extents predicted by time-dependent acoustic wave models

Theoretical models for chromospheric structures of late-type giant stars are computed, including the time-dependent propagation of acoustic waves. Models with short-period monochromatic shock waves as well as a spectrum of acoustic waves are discussed, and the method is applied to the stars Arcturus, Aldebaran, and Betelgeuse. Chromospheric extent, defined as the monotonic decrease with height of the time-averaged electron densities, are found to be 1.12, 1.13, and 1.22 stellar radii for the three stars, respectively; this corresponds to a time-averaged electron density of 10 to the 7th/cu cm. Predictions of the extended chromospheric obtained using a simple scaling law agree well with those obtained by the time-dependent wave models; thus, the chromospheres of all stars for which the scaling law is valid consist of the same number of pressure scale heights.

Cuntz, Manfred↗
NASA NTRS2017

CIMI Simulations with Newly Developed Multiparameter Chorus and Plasmaspheric Hiss Wave Models

Numerical simulation studies of the Earth's radiation belts are important to understand the acceleration and loss of energetic electrons. The Comprehensive Inner Magnetosphere-Ionosphere (CIMI) model considers the effects of the ring current and plasmasphere on the radiation belts to obtain plausible results. The CIMI model incorporates pitch angle, energy, and cross diffusion of electrons, due to chorus and plasmaspheric hiss waves. These parameters are calculated using statistical wave distribution models of chorus and plasmaspheric hiss amplitudes. However, currently, these wave distribution models are based only on a single-parameter, geomagnetic index (AE) and could potentially underestimate the wave amplitudes. Here we incorporate recently developed multiparameter chorus and plasmaspheric hiss wave models based on geomagnetic index and solar wind parameters. We then perform CIMI simulations for two geomagnetic storms and compare the flux enhancement of megavolt electrons with data from the Van Allen Probes and Akebono satellites. We show that the relativistic electron fluxes calculated with multiparameter wave models resemble the observations more accurately than the relativistic electron fluxes calculated with single-parameter wave models. This indicates that wave models based on a combination of geomagnetic index and solar wind parameters are more effective as inputs to radiation belt models.

Aryan, Homayon↗
NASA NTRS1980

Coupled wave model for large magnet coils

A wave coupled model based on field theory is evolved for analysis of fast electromagnetic transients on superconducting coils. It is expected to play a useful role in the design of protection methods against damage due to high voltages or any adverse effects that might arise from unintentional transients. The significant parameters of the coil are identified to be the turn to turn wave coupling coefficients and the travel time of an electromagnetic disturbance around a single turn. Unlike circuit theoretic inductor, the coil response evolves in discrete steps having durations equal to this travel time. It is during such intervals that high voltages are likely to occur. The model also bridges the gap between the low and high ends of the frequency spectrum.

Gabriel, G. J.↗
NASA NTRS1988

Folded resonance and seasonal vacillation in a thermally-forced baroclinic wave model

An eight-variable dynamical system is developed, representing a generalization of most previous low-order models of planetary wave behavior. As a special case a three component model, somewhat more general than a recent model of Lorenz and representing only thermal-monsoonal forcing (i.e., no mountains), is studied and shown to be capable of exhibiting a 'folded resonance' equilibrium portrait suggestive of that which seems to be required to account for the observed bimodality of the atmospheric long-wave amplitude. When forced by seasonal thermal variations the system can exhibit vacillatory fluctuation qualitatively similar to observations.

Saltzman, Barry↗
NASA NTRS2009

A Comparison of Surface Acoustic Wave Modeling Methods

Surface Acoustic Wave (SAW) technology is low cost, rugged, lightweight, extremely low power and can be used to develop passive wireless sensors. For these reasons, NASA is investigating the use of SAW technology for Integrated Vehicle Health Monitoring (IVHM) of aerospace structures. To facilitate rapid prototyping of passive SAW sensors for aerospace applications, SAW models have been developed. This paper reports on the comparison of three methods of modeling SAWs. The three models are the Impulse Response Method a first order model, and two second order matrix methods; the conventional matrix approach, and a modified matrix approach that is extended to include internal finger reflections. The second order models are based upon matrices that were originally developed for analyzing microwave circuits using transmission line theory. Results from the models are presented with measured data from devices.

Wilson, W. c.↗
NASA NTRS1994

Spectral properties of blast-wave models of gamma-ray burst sources

We calculate the spectrum of blast-wave models of gamma-ray burst sources, for various assumptions about the magnetic field density and the relativistic particle acceleration efficiency. For a range of physically plausible models we find that the radiation efficiency is high and leads to nonthermal spectra with breaks at various energies comparable to those observed in the gamma-ray range. Radiation is also predicted at other wavebands, in particular at X-ray, optical/UV, and GeV/TeV energies. We discuss the spectra as a function of duration for three basic types of models, and for cosmological, halo, and galactic disk distances. We also evaluate the gamma-ray fluences and the spectral characteristics for a range of external densities. Impulsive burst models at cosmological distances can satisfy the conventional X-ray paucity constraint S(sub x)/S(sub gamma)less than a few percent over a wide range of durations, but galactic models can do so only for bursts shorter than a few seconds, unless additional assumptions are made. The emissivity is generally larger for bursts in a denser external environment, with the efficiency increasing up to the point where all the energy input is radiated away.

Meszaros, P.↗
NASA NTRS1991

A planar oblique wave model for the Euler equations

A numerical method in which any transition between neighboring states in a multidimensional flowfield is reconstructed by a pattern of oblique waves. The wave pattern is obtained from a superposition of model waves which arise in a local linearization based on Rankine-Hugoniot averaging. The strengths and orientations of these waves are derived from a minimum path length rule applied in state space. Two test cases with comparisons to other methods in planar flow problems are presented to demonstrate the strengths of the method, and to point out its weaknesses.

Parpia, Ijaz H.↗
NASA NTRS1987

Reynolds stress closure in jet flows using wave models

Numerical methods were developed that will form the computational part of the turbulence closure scheme. A wave model was developed for the two-dimensional shear layer. This configuration is being used as a test case for the closure schemes. Various numerical schemes were examined to give efficient solutions of the Rayleigh equation for this geometry. These include both spectral and finite difference methods. Secondly, numerical methods are under development to solve the non-separable Rayleigh equation. This solution is required for the closure scheme in more complex geometries. A model problem was used to assist in the algorithm development. Two-dimensional spectral methods and a hybrid spectral/finite difference technique were developed. An analytic solution of the Rayleigh equation for a basic elliptic flow was obtained. This will be used to verify the stability codes developed for arbitrary geometries. Other numerical methods for solving the Rayleigh equation based on the boundary element technique were also examined. These solutions are forming the basis of a model for the shock structure in jets of arbitrary geometry.

Morris, P. J.↗