Pore-scale Modeling on Wettability Heterogeneity of Rocks
Numerical simulations of multiphase transport in porous media using a geometric domain from computed tomography scanning.
Guo, Ruichang↗
SEARCH · Search NASA
Results for “wettability models”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Techno-Economic Analysis of Gas-Liquid Contactors for Tritium Extraction from Lead-Lithium
To enable a sustainable fuel cycle, any deuterium-tritium fusion reactor must breed its tritium fuel onsite. Lead-lithium (PbLi), a eutectic metal, is a leading liquid breeder material for tritium generation. One challenge with PbLi blanket technology is the extraction of tritium from the molten eutectic. Three technologies are the focus of worldwide research: the vacuum permeator, the vacuum sieve tray, and the gas-liquid contactor (GLC). The present work offers a methodology for designing, sizing, optimizing, and costing a trickle-bed GLC. Here, we analyzed tritium extraction from PbLi using MELODIE experimental data by applying traditional packed bed mass transfer efficiency models along with supplementary models, like film theory. Our analysis revealed that traditional packed bed mass transfer efficiency models do not fit the MELODIE loop experimental data. Moreover, uncertainty in PbLi solubility resulted in a 325-fold increase in required gas flow rates when comparing identical packing heights. The film theory liquid mass transfer coefficient, Delt-Olujic wettability model, and Reiter tritium solubility values fit the MELODIE data best and were used both in the design and to conduct the economic analysis. Techno-economic analysis of the GLC was performed to evaluate three design sizes, all achieving a minimum extraction efficiency of 90 [%] for a total tritium extraction of 31 [kg/yr].
Fusion Fuel Cycle↗
Implementation of tritium transport in a gas-liquid contactor CFD simulation of tritium extraction from lead-lithium in ANSYS fluent
Modifications to the Computational Fluid Dynamic (CFD) software ANSYS Fluent were done to quantify and characterize tritium transport in Gas-Liquid Contactors (GLCs). A double-slit, Ergun-like equation was employed for the porous media model, with Ergun coefficients validated with Sulzer’s Sulcol software. Tritium transport from PbLi within the GLC was verified against analytical models. The geometry of the CFD model was based on the MELODIE GLC experiment. The hydrodynamic CFD pressure drop results align well with SulCol estimations and fall between the predictions of the analytical Delft-Olujic and Billet & Schultes models. In terms of mass transfer efficiency, traditional mass transfer models showed a significant deviation from experimental results when using varying values of H solubility in PbLi. A saturation phenomenon occurred when utilizing high solubility values for hydrogen in PbLi. In conclusion, a modified film theory mass transfer coefficient, incorporating either the Delft-Olujic or Billet & Schultes wettability model, yielded CFD-predicted extraction efficiencies that closely matched experimental measurements.
70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Wettability Effects on Falling Film Flow and Heat Transfer Over Horizontal Tubes in Jet Flow Mode
The performance of a falling-film heat exchanger is strongly linked to the surface characteristics and the heat transfer processes that take place over the tubes. The primary aim of this numerical study is to characterize the influence of surface wettability on the film flow behavior and its associated surface heat transfer in the jet-flow mode. Volume of fluid (VOF) based simulations are carried out for horizontal tubes with different surface wettabilities. The wettability of the tube surfaces is represented using the Kistler's dynamic contact angle model. Surface wettability effects ranging from superhydrophilic to superhydrophobic are studied by varying the equilibrium contact angle from 2 deg to 175 deg. Two different liquid mass flow rates of 0.06 and 0.18 kg/m-s corresponding to the inline and staggered jet flow modes are studied. Results are presented in terms of the liquid film thickness, the contact areas between the different phases (solid–liquid and liquid–air), and the heat transfer coefficient or Nusselt number. The resistance imposed by the increasing contact angles inhibits the extent of the liquid spreading over the tube surface, and this, in turn, influences the liquid film thickness, and the wetted area of the tube surface. A significant decrement in the heat transfer rate from the tube surfaces was observed as the equilibrium contact angle increased from 2 deg to 175 deg. The local distributions of the Nusselt number over the tube surface are strongly influenced by the flow recirculation in the liquid bulk.
Engineering↗
The role of the spatial heterogeneity and correlation length of surface wettability on two-phase flow in a CO 2 -water-rock system
This study characterized and modeled heterogeneous surface wettability in sandstone and investigated the role of spatial heterogeneity and correlation length of surface wettability on relative permeability in a supercritical CO 2 (scCO 2 )-brine-rock system. Understanding the role of wettability heterogeneity on relative permeability is essential to geological CO 2 sequestration, oil and gas recovery, and contaminated groundwater remediation. Although numerous studies have attempted to understand the influences of surface wettability, capillary number (Ca), and viscosity ratio, the role of the spatial variation and correlation length of surface wettability on two-phase flow in three-dimensional (3D) porous media has not been unraveled due to the challenges in the measurement and representation of realistic rock surface wettability. In this work, we conducted in-situ measurements of surface contact angle (CA) in a Bentheimer sandstone after CO 2 flooding using micro-computed tomography (micro-CT), and found that the pore-scale CA distribution on rock surfaces followed a log-normal distribution associated with a spatial correlation length. Based on the statistical information from CT scanning, a Gaussian random field was used to model CA distributions that had desired standard deviations and spatial correlation lengths, which were then adjusted within a certain range of values for sensitivity analyses to study their combined effects on the two-phase flow in the porous medium using the lattice Boltzmann (LB) method. The LB two-phase flow simulation was accelerated using hybrid, multicore parallel computing to overcome the challenges in simulating multiphase flow in a large 3D domain having 800 × 800 × 600 nodes. The simulation results showed that the surface wettability heterogeneity (i.e., standard deviation of CA) had a lesser effect on the relative permeability of the wetting fluid (water) but a more significant impact on the relative permeability of the non-wetting fluid (scCO 2 ). The Corey model was used to fit the LB-simulated relative permeability curves of water and scCO 2 and showed that the variations in the relative permeability curves for both water and scCO 2 increased as the standard deviation and spatial correlation length of CA increased. This study illustrated that the assumption of homogeneous surface wettability may cause errors in multiphase flow simulations. Furthermore, the impacts of both the standard deviation and spatial correlation length of CAs should be accounted for. This is the first study that explored the spatial correlation lengths associated with CA distributions on sandstone surfaces and comprehensively investigated the roles of both spatial variation and correlation length of CA on two-phase flow properties in 3D porous media. The optimized LB multiphase flow model was proved a powerful tool to study the interplays and combined effects of these statistical parameters, which had critical applications in numerous natural and engineering processes that involved multiphase flow in porous media.
58 GEOSCIENCES↗
Quantifying the Effect of Pore‐Size Dependent Wettability on Relative Permeability Using Capillary Bundle Model
Abstract Relative permeability is a key parameter for characterizing the multiphase flow dynamics in porous media at macroscopic scale while it can be significantly impacted by wettability. Recently, it has been reported in microfluidic experiments that wettability is dependent on the pore size (Van Rooijen et al., 2022). To investigate the effect of pore‐size‐dependent wettability on relative permeability, we propose a theoretical framework informed by digital core samples to quantify the deviation of relative permeability curves due to wettability change. We find that the significance of impact is highly dependent on two factors: (i) the function between contact angle and pore size (ii) overall pore size distribution. Under linear function, this impact can be significant for tight porous media with a maximum deviation of 1,000%.
Yu, Siqin↗
Predictive numerical modeling of plasma-induced surface roughness and wettability evolution in LM-PAEK/CF tape
Plasma surface modification effectively enhances adhesion in thermoplastic composites, yet its impacts on high-performance polymers like low-melting polyaryletherketone (LM-PAEK) remain inadequately quantified. Here, this study integrates experimental analysis and numerical modeling to characterize surface roughness and wettability changes in LM-PAEK/carbon fiber composites treated with atmospheric plasma. Atomic Force Microscopy quantified surface topography (n = 10 per condition for contact angles), while static contact-angle assessments measured wettability. Roughness rapidly increased from ∼0.2 nm to 1.6 nm, and contact angle reduced from ∼90° to 24°, both stabilizing after 25–30 s of exposure. A semi-empirical, physics-informed framework was calibrated to these data, coupling surface chemistry via the Owens–Wendt decomposition with topography via the Wenzel roughness factor, and evaluated using out-of-sample (cross-validated) tests, while static contact angle assessments measured wettability. Numerical predictions matched experimental results closely (RMSE <5%, R 2 > 0.95). Incorporating material-specific parameters, the calibrated model supports plasma-treatment optimization and provides quantitative guidance for improving interfacial adhesion in thermoplastic composite manufacturing.
Atomic Force Microscopy↗
Experiments on the Motion of Drops on a Horizontal Solid Surface due to a Wettability Gradient
Results from experiments performed on the motion of drops of tetraethylene glycol in a wettability gradient present on a silicon surface are reported and compared with predictions from a recently developed theoretical model. The gradient in wettability was formed by exposing strips cut from a silicon wafer to decyltrichlorosiland vapors. Video images of the drops captured during the experiments were subsequently analyzed for drop size and velocity as functions of position along the gradient. In separate experiments on the same strips, the static contact angle formed by small drops was measured and used to obtain the local wettability gradient to which a drop is subjected. The velocity of the drops was found to be a strong function of position along the gradient. A quasi-steady theoretical model that balances the local hydrodynamic resistance with the local driving force generally describes the observations; possible reasons for the remaining discrepancies are discussed. It is shown that a model in which the driving force is reduced to accomodate the hysteresis effect inferred from the data is able to remove most of the discrepancy between the observed and predicted velocities.
Moumen, Nadjoua↗
Modeling Ni redistribution in the hydrogen electrode of solid oxide cells through Ni(OH) 2 diffusion and Ni-YSZ wettability change
Ni redistribution in the hydrogen electrodes of solid oxide cells is an important degradation mechanism. Its driving force is still under debate. This work focuses on the interplay between Ni(OH) 2 diffusion and Ni-YSZ wettability change. With a Ni(OH) 2 diffusion model developed in our previous work, we further employ three models for the Ni-YSZ contact angle to quantify the Ni-YSZ wettability change. The microstructure evolutions in a reconstructed Ni-YSZ electrode are simulated under selected experimental operating conditions. It is shown that the phenomenological model can capture the driving force of Ni spreading/detachment on YSZ surface and the Ni migration reported in experiments can be qualitatively reproduced through the competition between Ni(OH) 2 diffusion and Ni-YSZ wettability change. It is also found that the initial microstructure of the active layer and the microstructure characteristics in the support layer can strongly affect the distribution of steam partial pressure and overpotential, hence the Ni redistribution, in the active layer, which may explain the inconsistencies in experiments. Further, our results show that there are two missing pieces in current theory of Ni redistribution: a mechanism of fast Ni diffusion under humid atmosphere and the physical reason behind the Ni spreading/detachment.
25 ENERGY STORAGE↗
Fluid – Fluid Interfacial Area and Its Impact on Relative Permeability - A Pore Network Modeling Study
Abstract Relative permeability (kr) is commonly modeled as an empirical function of phase saturation. Although current empirical models can provide a good match of one or two measured relative permeabilities using saturation alone, they are unable to predict relative permeabilities well when there is hysteresis or when physical properties such as wettability change. Further, current models often result in relative permeability discontinuities that can cause convergence and accuracy problems in simulation. To overcome these problems, recent research has modeled relative permeability as a state function of both saturation (S) and phase connectivity (X). Pore network modeling (PNM) data, however, shows small differences in relative permeability for the same S-X value when approached from a different flow direction. This paper examines the impact of one additional Minkowski parameter (Mecke and Arns, 2005), the fluid-fluid interfacial area, on relative permeability to identify if that satisfactorily explains this discrepancy. We calculate the total fluid-fluid interfacial areas (IA) during two-phase (oil/water) flow in porous media using pore network modeling. The area is calculated from PNM simulations using the areas associated with corners and throats in pore elements of different shapes. The pore network is modeled after a Bentheimer sandstone, using square, triangular, and circular pore shapes. Simulations were conducted for numerous primary drainage and imbibition cycles at a constant contact angle of 0° for the wetting phase. Simultaneous measurements of capillary pressure, relative permeability, saturation, and phase connectivity are made for each displacement. Fluid-fluid interfacial area is calculated from the PNM capillary pressure, the fluid location in the pore elements, and the pore element dimensional data. The results show that differences in the relative permeability at the same (S,X) point is explained well by differences in the fluid-fluid interfacial area (IA). That is, for a larger change in IA at these intersection points, the permeability difference is greater. That difference in relative permeability approaches zero as the difference in IA approaches zero. This confirms that relative permeability can be modeled better as a unique function of S, X, and IA. The results also show that an increase in IA restricts flow decreasing the nonwetting (oil) phase permeability. This decrease is caused by an increase in the throat area fraction compared to the corner area as the total area IA increases. The wetting phase relative permeability, however, shows the inverse trend, in that its relative permeability is greater when IA becomes larger owing to a greater fraction of the total area associated with the corners. The area IA, however, impacts the nonwetting phase relative permeability more than the wetting phase relative permeability. Corner flow improves the wetting phase relative permeability because the wetting phase is continuous there. Finally, a sensitivity analysis shows that relative permeability a is more sensitive to change in S than they are for IA for the case studied implying that if only two parameters are used to model relative permeability it is better to choose S and X.
Engineering↗
Motion of Drops on Surfaces with Wettability Gradients
A liquid drop present on a solid surface can move because of a gradient in wettability along the surface, as manifested by a gradient in the contact angle. The contact angle at a given point on the contact line between a solid and a liquid in a gaseous medium is the angle between the tangent planes to the liquid and the solid surfaces at that point and is measured within the liquid side, by convention. The motion of the drop occurs in the direction of increasing wettability. The cause of the motion is the net force exerted on the drop by the solid surface because of the variation of the contact angle around the periphery. This force causes acceleration of an initially stationary drop, and leads to its motion in the direction of decreasing contact angle. The nature of the motion is determined by the balance between the motivating force and the resisting hydrodynamic force from the solid surface and the surrounding gaseous medium. A wettability gradient can be chemically induced as shown by Chaudhury and Whitesides who provided unambiguous experimental evidence that drops can move in such gradients. The phenomenon can be important in heat transfer applications in low gravity, such as when condensation occurs on a surface. Daniel et al have demonstrated that the velocity of a drop on a surface due to a wettability gradient in the presence of condensation can be more than two orders of magnitude larger than that observed in the absence of condensation. In the present research program, we have begun to study the motion of a drop in a wettability gradient systematically using a model system. Our initial efforts will be restricted to a system in which no condensation occurs. The experiments are performed as follows. First, a rectangular strip of approximate dimensions 10 x 20 mm is cut out of a silicon wafer. The strip is cleaned thoroughly and its surface is exposed to the vapor from an alkylchlorosilane for a period lasting between one and two minutes inside a desiccator. This is done using an approximate line source of the vapor in the form of a string soaked in the alkylchlorosilane. Ordinarily, many fluids, including water, wet the surface of silicon quite well. This means that the contact angle is small. But the silanized surface resists wetting, with contact angles that are as large as 100 degs. Therefore, a gradient of wettability is formed on the silicon surface. The region near the string is highly hydrophobic, and the contact angle decreases gradually toward a small value at the hydrophilic end away from this region. The change in wettability occurs over a distance of several mm. The strip is placed on a platform within a Plexiglas cell. Drops of a suitable liquid are introduced on top of the strip near the hydrophobic end. An optical system attached to a video camera is trained on the drop so that images of the moving drop can be captured on videotape for subsequent analysis. We have performed preliminary experiments with water as well as ethylene glycol drops. Results from these experiments will be presented in the poster. Future plans include the refinement of the experimental system so as to permit images to be recorded from the side as well as the top, and the conduct of a systematic study in which the drop size is varied over a good range. Experiments will be conducted with different fluids so as to obtain the largest possible range of suitably defined Reynolds and Capillary numbers. Also, an effort will be initiated on theoretical modeling of this motion. The challenges in the development of the theoretical description lie in the proper analysis of the region in the vicinity of the contact line, as well as in the free boundary nature of the problem. It is known that continuum models assuming the no slip condition all the way to the contact line fail by predicting that the stress on the solid surface becomes singular as the contact line is approached. One approach for dealing with this issue has been to relax the no-slip boundary condition using the Navier model. Molecular dynamics simulations of the contact line region show that for a non-polar liquid on a solid surface, the no-slip boundary condition is in fact incorrect near the contact line. Furthermore, the same simulations also show that the usual relationship between stress and the rate of deformation breaks down in the vicinity of the contact line. In developing continuum theoretical models of the system, we shall accommodate this knowledge to the extent possible.
Subramanian, R. Shankar↗
Impact of Rock Wettability and Mineralization on CO 2 Storage Efficiency in Basalt Reservoirs
Basalt formations have emerged as highly promising targets for geological CO 2 storage due to their abundance of reactive silicate minerals that can rapidly convert dissolved CO 2 into stable carbonate minerals. The efficiency of CO 2 trapping in basalts, however, depends not only on their geochemical reactivity but also on reservoir wettability, which governs how CO 2 partitions among structural, residual, solubility, and mineral trapping mechanisms. However, wettability and mineral kinetics have largely been examined separately, wettability for plume migration and kinetics in terms of mineralization, leaving their coupled impact unquantified. Here, we systematically integrate th ese processes in a reservoir-scale reactive transport model to quantify the impact of three distinct wettability conditions (water-wet, mixed-wet, and CO 2 -wet) on plume migration, mineral precipitation, pore-scale blockage, and long-term immobilization. Results show that under ideal conditions (no mineralization), water-wet systems exhibited plume aspect ratios up to 28% higher than CO 2 -wet systems and promoted at least 60% greater residual trapping. When mineralization was incorporated, mineral trapping accounted for 57%, 53%, and 46% of the total immobilized CO 2 in water-wet, mixed-wet, and CO 2 -wet systems, respectively. Dissolved CO 2 contributed 43-46%, while residual trapping remained below 5%, and mobile CO 2 was substantially reduced due to mineralization, demonstrating that as the system becomes more water-wet, CO 2 is more effectively converted into stable carbonate minerals, although extensive mineral precipitation may lead to pore clogging. A global Sobol-Morris sensitivity analysis further reveals that the kinetic parameters of reactive minerals are the most influential factor, followed by wettability, while salinity has only a minor influence. Furthermore, these findings highlight that wettability is not merely a flow property but a fundamental control on CO 2 mineralization in basalts, with direct implications for site selection for storage projects.
Basalts↗
Effects of various parameters of different porous transport layers in proton exchange membrane water electrolysis
Porous transport layers (PTLs) play an important role in proton exchange membrane water electrolysis (PEMWE) cells. The PTL facilitates water and gas transport, as well as thermal and electrical conduction, and is required to sustain good contact with adjacent components. It is expected that using PTLs with variations in material properties such as structure, composition, thickness and wettability results in performance changes of the PEMWE. Here, a general mathematical PEMWE model is developed that separates and analyzes the contributions of ohmic, activation, diffusion and Nernst potentials. For model validation, three inherently different anode PTL structures (carbon paper, sintered titanium particles, and titanium felt) are operated over a range of conditions. Additionally, the effects of PTL wettability were used to verify the model using Polytetrafluoroethylene (PTFE) treated Toray papers with PTFE loading ranging from 0% to 20%. The modeling results of both PTFE treated and untreated materials show good agreement with the experimental data. Mass transport or diffusion loss is the primary reason for performance differences between PTFE treated and untreated PTLs. Sintered titanium PTLs with thicknesses above 1 mm suffer from up to 33% increased ohmic losses without indicating any obvious changes in activation and diffusion losses when compared to untreated PTLs. The losses of the cell increase when using PTFE treated Toray paper. Individual contributions are quantified and assigned to increased ohmic, activation, and diffusion losses. In conclusion, the proposed model offers insights into the overpotential contributions of a PEMWE. It is a useful tool for predicting performance of various PTL materials and can be applied for PTL development and optimization efforts.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Toward Lithium Recovery Using Modular (and Membraneless) Phase Separation and Extraction (MPSE) Technology with Ionic Liquid (IL) Solvents: Effect of Coatings
In this work, a single-channel slope-plate Modular and Membrane-less Phase Separation and Extraction (MPSE) device was fabricated using 3D printing. The slope-plate was designed with an insertable glass slide to enable surface modification with coatings. Self-assembled monolayers (SAMs) and perfluoropolyether (Zdol) coatings were applied to tailor surface wettability and enhance phase separation. Using a model biphasic system of water and hexadecane, both coatings significantly improved the separation efficiency compared to the uncoated device by promoting selective wetting. Building on these results, lithium extraction from a simulated saline solution was investigated using 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][NTf₂]) as the ionic liquid (IL) extractant. The IL effectively extracted Li⁺ from the aqueous phase in bulk extraction, demonstrating its potential for lithium recovery. However, the low interfacial tension between the IL and aqueous phases posed challenges for phase separation. The application of SAM and Zdol coatings effectively mitigated this issue. Overall, integrating tailored surface chemistry with the slope-plate MPSE design shows great promise as an efficient and scalable platform for studying liquid–liquid separation and optimizing ionic liquid–based extraction processes for lithium recovery from saline sources.
3D printing↗
Influence of Clay Wettability Alteration on Relative Permeability
Abstract Understanding the wettability of porous materials is important to model fluid flow in the subsurface. One of the critical factors that influences wetting in real reservoirs is the composition of geologic materials. The wetting properties for clay minerals can have a particularly strong impact on flow and transport. In this work, we analyze the chemical composition of a Mt. Simon sandstone core to resolve the microscopic structure of clay regions and assess how alterations to the local wetting properties influence multiphase transport based on core flooding experiments and relative permeability simulations. We show that whichever fluid has greater affinity toward clay minerals will tend to accumulate within these high surface area regions, leading to dramatic shifts in the relative permeability. This work establishes the essential importance of the mineral composition and associated wetting properties in the modeling of flow and transport in reservoir‐scale systems.
Fan, Ming↗
3D Printed Parahydrophobic Surfaces as Multireaction Platforms
We report Parahydrophobic surfaces (PHSs) composed of arrays of cubic μ-pillars with a double scale of roughness and variable wettability were systematically obtained in one step and a widely accessible stereolithographic Formlabs 3D printer. The wettability control was achieved by combining the geometrical parameters (H = height and P = pitch) and the surface modification with fluoroalkyl silane compounds. Homogeneous distribution of F and Si atoms onto the pillars was observed by XPS and SEM-EDAX. A nano-roughness on the heads of the pillars was achieved without any post-treatment. The smallest P values lead to surfaces with static contact angles (CAs) >150° regardless of the H utilized. Interestingly, the relationship 0.6 ≤ H/P ≤ 2.6 obtained here was in good agreement with the H/P values reported for nano- and submicron pillars. Furthermore, experimental CAs, advancing and receding CAs, were consistent with the theoretical prediction from the Cassie–Baxter model. Structures covered with perfluorodecyltriethoxysilane with high H and short P lead to PHSs. Conversely, structures covered with perfluorodecyltrimethoxysilane exhibited a superhydrophobic behavior. Finally, several aqueous reactions, such as precipitation, coordination complex, and nanoparticle synthesis, were carried out by placing the reactive agents as microdroplets on the parahydrophobic pillars, demonstrating the potential application as chemical multi-reaction array platforms for a large variety of relevant fields in microdroplet manipulation, microfluidics systems, and health monitoring, among others.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Acid droplet generation in SRM exhaust clouds
A free energy analysis is applied to the co-condensation/evaporation of H2O and HCl vapors on wettable particles in open air in order to model droplet nucleation in solid rocket motor (SRM) exhaust clouds. Formulations are defined for the free energy change, the drop radius, the saturation ratio, the total number of molecules, and the mean molecular radius in solution, as well as the molecular volume and the concentration range. The free energy release in the phase transition for the AL2O3 nuclei in the SRM exhaust is examined as a function of the HCl molefraction and nucleating particle radius, based on Titan III launch exhaust cloud conditions 90 sec after ignition. The most efficient droplet growth is determined to occur at an HCl molefraction of 0.082 and a particle radius of 0.0000013 cm, i.e. a molality of 5.355.
Dingle, A. N.↗
Capillary-Driven Flow in Liquid Filaments Connecting Orthogonal Channels
Capillary phenomena plays an important role in the management of product water in PEM fuel cells because of the length scales associated with the porous layers and the gas flow channels. The distribution of liquid water within the network of gas flow channels can be dramatically altered by capillary flow. We experimentally demonstrate the rapid movement of significant volumes of liquid via capillarity through thin liquid films which connect orthogonal channels. The microfluidic experiments discussed provide a good benchmark against which the proper modeling of capillarity by computational models may be tested. The effect of surface wettability, as expressed through the contact angle, on capillary flow will also be discussed.
Allen, Jeffrey S.↗