Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind field campaign”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Intercomparison of Ground and Aerial Systems for Urban Advanced Air Mobility Wind Field Campaigns

The need for accurate wind measurement data in urban areas is a rising concern for advanced air mobility such as uncrewed aircraft systems (UAS) and urban air mobility. The lack of quality observations of wind fields and other parameters presents a challenge for operability. Urban areas provide additional difficulty because of the complex terrain and varying building geometry and their associated flow fields. This has led to an extensive knowledge gap when it comes to real-time urban measurements. This paper focuses on comparison of available systems and the types of measurements for urban wind field campaigns. LiDARs and SoDARs are two of many ground instruments capable of gathering the necessary wind field information. UAS is also a viable technique of obtaining aerial wind measurements. Each of these all have specific strengths that make their measurements more suitable than others. Ground based and airborne systems are evaluated and compared to provide a thorough look into which system or instrument might provide the most accurate and definitive results for urban wind field campaigns.

Tyler L Willhite↗
NASA NTRS1992

Tropospheric and stratospheric wind profiling with a direct detection Doppler lidar

The Space Physics Research Laboratory at the University of Michigan has been operating a direct detection, high resolution Doppler Lidar (HRDL) to measure winds in the boundary layer, free troposphere and lower stratosphere. A direct detection Doppler lidar measures the Doppler shift of the aerosol or Rayleigh backscattered signal, from which the wind velocity vector can be retrieved (Benedetti-Michelangeli et al, 1972, 1974; Chanin et al., 1989; Abreu et al., 1992). The system components are shown. The transmitting system is a Continuum NY-60 Nd:YAG laser frequency doubled to a wavelength of 532 nm. The laser is injection seeded for single line mode operation yielding a linewidth of 0.0045 cm(exp -1) (135 MHz) with excellent shot-to-shot frequency stability. The laser produces 60 mJ pulses and operates at a 50 Hz repetition rate for an effective output power of 3.0 W. A description of the University of Michigan's Doppler lidar is given with examples of wind profiles for the boundary layer, free troposphere, and for the lower stratosphere. The system provides a reliable method of remotely measuring the wind. The wind error is smallest in regions of high aerosols. The system also produces aerosol extinction profiles versus altitude which can be determined by the shape of the spectra. The system has been installed in a trailor so that measurements can be made for field campaigns. Winds and aerosol data are available immediately at the site for use in forecasting.

Abreu, Vincent J.↗
NASA NTRS2023

Wind Profiling With the Airborne Doppler Aerosol Wind Lidar During the 2022 Convective Processes Experiment

The 2017 Decadal Survey for Earth Science and Applications from Space (ESAS 2017) identifies a critical need for improving our understanding of Planetary Boundary Layer (PBL) processes and air-surface fluxes as well as why clouds, convection, and heavy precipitation occur when and where they do. Lidars are uniquely capable of collecting high precision and high spatio-temporal observations that have been used for atmospheric process studies from the ground, aircraft, and space. The wind lidar team at the NASA Langley Research Center (LaRC) started the development of Doppler wind lidar more than a decade ago to demonstrate technologies required for an Earth-orbiting system to globally measure wind profiles. Since then, an airborne Doppler Aerosol WiNd (DAWN) lidar system has been developed and participated in a series of field campaigns. The Doppler Aerosol WiNd (DAWN) lidar uses atmospheric aerosol motion to derive vertical profiles of horizontal wind speed and direction beneath the aircraft. In September 2022, DAWN, along with a suite of other instruments, was flown on a NASA DC-8 as part of The Convective Processes EXperiment – Cabo Verde (CPEX-CV) field campaign. A main objective of CPEX was to obtain a comprehensive set of temperature, humidity and, particularly, wind observations over tropical waters in undisturbed conditions, Saharan dust outbreaks, and in the vicinity of scattered through organized deep convection in all phases of the convective life cycle. DAWN collected data for approximately 90 hours across 13 CPEX-CV science flights. Airborne Vertical Atmospheric Profiling System (AVAPS) dropsondes were dropped throughout the flight for profiling the atmosphere and validating the DAWN instrument. DAWN had co-located data with 347 AVAPS NRD41 dropsondes, providing 32,117 vertical levels for a comprehensive validation of DAWN wind retrievals. DAWN showed very good agreement with dropsondes of ~0.2 m/s bias and ~1.8 m/s RMS. Given this agreement, DAWN is considered to be a worthy reference dataset, and its retrievals have been compared to winds derived from GOES Atmospheric Motion Vectors (AMVs), Advanced Scatterometer winds (ASCAT), and model data from GFS, GEOS, and MERRA-2 to better understand the quality of our current models and satellite wind observations. The proposed presentation will provide a brief description of the DAWN instrument, discuss the synergistic observations collected across a wide range of atmospheric conditions sampled during the CPEX-CV flights, and a summary of comparisons between DAWN, GOES AMV, ASCAT, and model analyses/predictions, with an emphasis on the PBL.

DAWN↗
NASA NTRS2002

Sounding-Diagnosed Convective Environments and Preliminary Energy Budgets Diagnosed during the TRMM Field Campaigns

An overview of mean convective thermodynamic and wind profiles for the Tropical Rainfall Measuring Mission (TRMM) Large Scale Biosphere-Atmosphere Experiment (LBA) and Kwajalein Experiment (KWAJEX) field campaigns will be presented, highlighting the diverse continental and marine tropical environments in which rain clouds and mesoscale convective systems evolved. An assessment of ongoing sounding quality control procedures will be shown. Additionally, we will present preliminary budgets of sensible heat source (Q1) and apparent moisture sink (Q2), which have been diagnosed from the various sounding networks.

Halverson, Jeffrey B.↗
NASA NTRS2001

The Bi-Modal Pattern of the Summer Circulation Over South America

Submonthly variations in warm-season (January-February) precipitation over South America, in special over the Amazon basin, central southwest Brazil, north Argentina, and Paraguay are shown to be strongly linked to variations in the moisture entering the continent from the Atlantic ocean. Two distinct regimes of lower tropospheric winds (westerlies and easterlies) were observed in Rondonia during the Wet Season Atmospheric Mesoscale Campaign (WETAMC) component of the Large Scale Atmosphere-Biosphere Experiment in Amazonia (LBA) and the Tropical Rainfall Measuring Mission (TRMM) field campaign. The westerly (easterly) winds were associated with the strong (weak) convective activity over the South Atlantic Convergence Zone (SACZ). The whole period of this study (January-February) was divided into SACZ and NSACZ (No SACZ) events. The vertically integrated moisture fluxes over the Amazon and Prata basin from the National Aeronautics and Space Administration/Goddard Data Assimilation Office (NASA/DAO) assimilation show that during SACZ (NSACZ) event strong (weak) convergence occurred over the Amazon basin with divergence (convergence) over the Prata basin. Submonthly variations in the SACZ also can be linked to extreme climate anomalies such as droughts or flooding conditions over the Amazon and Prata basin.

Herdies, Dirceu Luis↗
NASA NTRS1990

Mean state densities, temperatures and winds during the MAC/SINE and MAC/EPSILON campaigns

Two field campaigns were conducted, primarily in northern Norway, in the summer and late autumn of 1987; these yielded a total of 41 in situ temperature profiles and 67 in situ wind profiles. Simultaneously, ground-based measurements were conducted of OH temperatures and sodium lidar temperatures for 85 and 104 hours, respectively. The summer campaign's mean temperature profile exhibited major deviations from the CIRA (1986) reference atmosphere; the differences between this model and the observations are less pronounced in the autumn. Both the summer and autumn mean wind profiles were in general agreement with the CIRA model.

Luebken, F.-J.↗
NASA NTRS2000

Double-Edge Molecular Measurement of Lidar Wind Profiles in the VALID Campaign

We have developed a transportable container based direct detection Doppler lidar based on the double-edge molecular technique. The pulsed solid state system was built at the University of Geneva. It was used to make range resolved measurements of the atmospheric wind field as part of the VALID campaign at the Observatoire de Haute Provence in Provence, France in July 1999. Comparison of our lidar wind measurements, which were analyzed without knowledge of the results of rawinsonde measurements made under the supervision of ESA, show good agreement with these rawinsondes. These are the first Doppler lidar field measurements made with an eyesafe direct detection molecular-based system at 355 nm and serve as a demonstrator for future spaceborne direct detection wind systems such as the Atmospheric Dynamics mission. Winds are an important contributor to sea surface temperature measurements made with the Tropical Rainfall Measuring Mission (TRMM) and also affect the TRMM rainfall estimates.

Korb, C. Laurence↗
NASA NTRS2015

A High-Resolution Merged Wind Dataset for DYNAMO: Progress and Future Plans

In order to support research on optimal data assimilation methods for the Cyclone Global Navigation Satellite System (CYGNSS), launching in 2016, work has been ongoing to produce a high‐resolution merged wind dataset for the Dynamics of the Madden Julian Oscillation (DYNAMO) field campaign, which took place during late 2011/early 2012. The winds are produced by assimilating DYNAMO observations into the Weather Research and Forecasting (WRF) three‐dimensional variational (3DVAR) system. Data sources from the DYNAMO campaign include the upper‐air sounding network, radial velocities from the radar network, vector winds from the Advanced Scatterometer (ASCAT) and Oceansat‐2 Scatterometer (OSCAT) satellite instruments, the NOAA High Resolution Doppler Lidar (HRDL), and several others. In order the prep them for 3DVAR, significant additional quality control work is being done for the currently available TOGA and SMART‐R radar datasets, including automatically dealiasing radial velocities and correcting for intermittent TOGA antenna azimuth angle errors. The assimilated winds are being made available as model output fields from WRF on two separate grids with different horizontal resolutions ‐ a 3‐km grid focusing on the main DYNAMO quadrilateral (i.e., Gan Island, the R/V Revelle, the R/V Mirai, and Diego Garcia), and a 1‐km grid focusing on the Revelle. The wind dataset is focused on three separate approximately 2‐week periods during the Madden Julian Oscillation (MJO) onsets that occurred in October, November, and December 2011. Work is ongoing to convert the 10‐m surface winds from these model fields to simulated CYGNSS observations using the CYGNSS End‐To‐End Simulator (E2ES), and these simulated satellite observations are being compared to radar observations of DYNAMO precipitation systems to document the anticipated ability of CYGNSS to provide information on the relationships between surface winds and oceanic precipitation at the mesoscale level. This research will improve our understanding of the future utility of CYGNSS for documenting key MJO processes.

Lang, Timothy J.↗
NASA NTRS2022

An Evaluation of the Liquid Cloud Droplet Effective Radius Derived from MODIS, Airborne Remote Sensing, and in Situ Measurements from CAMP2Ex

The cloud drop effective radius (Re) of the drop size distribution derived from passive satellite sensors is a key variable used in climate research. Validation of these satellite products has often taken place under stratiform cloud conditions that favor the assumption of cloud horizontal homogeneity used by the retrieval techniques. However, many studies have noted concerns with respect to significant biases in retrieved Re arising from cloud heterogeneity, for example, in cumulus cloud fields. Here, we examine data collected during the 2019 “Cloud, Aerosol and Monsoon Processes Philippines Experiment” (CAMP2Ex), which, in part, targeted the objective of providing the first detailed evaluation of Re retrieved across multiple platforms and techniques in a cumulus and congestus cloud region. Our evaluation consists of cross-comparisons of Re between the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard the Terra satellite, the Research Scanning Polarimeter (RSP) onboard the NASA P-3 aircraft, and in situ measurements from both the NASA P-3 and Learjet aircraft that are all taken in close spatiotemporal proximity to the same cloud fields. A particular advantage of our approach lies in the capability of the RSP to retrieve Re using a bi-spectral MODIS approach and a polarimetric approach, which allows for the evaluation of bi-spectral and polarimetric Re retrievals from an airborne perspective using the same samples. Averaged over all P-3 flight segments examined here for warm clouds, the RSP polarimetric method, the in situ method, and the bias-adjusted MODIS method of Fu et al. (2019) show a comparable median (mean ± standard deviation) for the Re samples of 9.6 (10.2 ± 4.0) µm, 11.0 (13.6 ± 11.3) µm, and 10.4 (10.8 ± 3.8) µm, respectively. These values are far lower than the values of 15.1 (16.2 ± 5.5) µm and 17.2 (17.7 ± 5.7) µm from the bi-spectral retrievals of RSP and MODIS, respectively. Similar results are observed when Re is segregated by cloud-top height and in detailed case studies. The clouds sampled during CAMP2Ex consist of mostly small (mean transect length ∼ 1.4 km) and low clouds (mean cloud-top height ∼ 1 km), which had more numerous small clouds than the trade wind cumuli sampled in past field campaigns such as Rain in Shallow Cumulus over the Ocean (RICO) and the Indian Ocean Experiment (INDOEX). The overestimates of Re from the RSP bi-spectral technique compared with the polarimetric technique increased as cloud size and cloud optical depth decreased. Drizzle, cloud-top bumpiness, and solar zenith angle, however, are not closely correlated with the overestimate of bi-spectral Re. For shallow clouds that dominated the liquid cloud cover for the CAMP2Ex region and period, we show that 3-D radiative transfer and cloud heterogeneity, particularly for the optically thin and small clouds, appear to be the leading cause of the large positive biases in bi-spectral retrievals. Because this bias varies with the underlying structure of the cloud field, caution continues to be warranted in studies that use bi-spectral Re retrievals in cumulus cloud fields.

Cloud microphysics↗
NASA NTRS2003

HARLIE Aerosol and Cloud Structure and Wind Observations during HARGLO and IHOP

The Holographic Airborne Rotating Lidar Instrument Experiment (HARLIE) is a conical-scanning, 1-micron wavelength lidar that has been adapted for ground-based applications and used to infer horizontal wind information by tracking the motions of aerosol and cloud scattering structures. In addition, HARLIE's rapid continuous scanning enables boundary layer statistics and a new cloud lidar data product that gives cloud coverage as a function of altitude with high temporal resolution. HARLIE has been used in several field campaigns while developing the techniques for wind, boundary layer (BL), and cloud data products. These campaigns involved a variety of wind measuring instruments including rawindsondes, cloud-tracked winds from video imagery, Doppler lidars and Doppler radars. HARGLO-2 was one of these campaigns and was dedicated to wind profile intercomparisons over a 1-week period in November of 2001. The most recent of these campaigns was the International H20 Project (IHOP) located in the Southern Great Plains of the US during May and June of 2002.

Schwemmer, Geary K.↗
NASA NTRS1999

Coherent Doppler Wind Lidar Technology for Space Based Wind Measurements Including SPARCLE

It has been over 30 years since coherent lidar systems first measured wind velocity, and over 20 years since the "ultimate application" of measuring Earth's winds from space was conceived. Coherent or heterodyne optical detection involves the combination (or mixing) of the returned optical field with a local oscillator (LO) laser's optical field on the optical detector. This detection technique yields the benefits of dramatically improved signal-to-noise ratios; insensitivity to detector noise, background light and multiply scattered light; reduction of the returned signal's dynamic range; and preservation of the optical signal spectrum for electronic and computer processing. (Note that lidar systems are also referred to as optical radar, laser radar, and LADAR systems.) Many individuals, agencies, and countries have pursued the goal of space-based wind measurements through technology development, experiments, field campaigns and studies.

Kavaya, Michael J.↗
NASA NTRS2014

Exploring the Utility of the Planned CYGNSS Mission for Investigating the Initiation and Development of the Madden-Julian Oscillation

CYGNSS is a planned constellation consisting of multiple micro-satellites that leverage the Global Positioning System (GPS) to provide rapidly updated, high resolution (approx. 15-50 km, approx. 4 h) surface wind speeds (via bi-static scatterometry) over the tropical oceans in any weather condition, including heavy rainfall. The approach of the work to be presented at this conference is to utilize a limited-domain, cloud-system resolving model (Weather Research and Forecasting or WRF) and its attendant data assimilation scheme (Three-Dimensional Variational Assimilation or 3DVAR) to investigate the utility of the CYGNSS mission for helping characterize key convectiveto- mesoscale processes - such as surface evaporation, moisture advection and convergence, and upscale development of precipitation systems - that help drive the initiation and development of the Madden-Julian Oscillation (MJO) in the equatorial Indian Ocean. The proposed work will focus on three scientific objectives. Objective 1 is to produce a high-resolution surface wind dataset resolution (approx. 0.5 h, approx. 1-4 km) for multiple MJO onsets using WRF-assimilated winds and other data from the DYNAmics of the MJO (DYNAMO) field campaign, which took place during October 2011 - March 2012. Objective 2 is to study the variability of surface winds during MJO onsets at temporal and spatial scales of finer resolution than future CYGNSS data. The goal is to understand how sub-CYGNSS-resolution processes will shape the observations made by the satellite constellation. Objective 3 is to ingest simulated CYGNSS data into the WRF model in order to perform observing system simulation experiments (OSSEs). These will be used to test and quantify the potential beneficial effects provided by CYGNSS, particularly for characterizing the physical processes driving convective organization and upscale development during the initiation and development of the MJO. The proposed research is ideal for answering important questions about the CYGNSS mission, such as the representativeness of surface wind retrievals in the context of the complex airflow processes that occur during heavy precipitation, as well as the tradeoffs in retrieval accuracy that result from finer spatial resolution of the CYGNSS winds versus increased errors/noisiness in those data. Research plans and initial progress toward these objectives will be presented.

Lang, Timothy↗
NASA NTRS1998

Airborne/Space-Based Doppler Lidar Wind Sounders Sampling the PBL and Other Regions of Significant Beta and U Inhomogeneities

This final report covers the period from April 1994 through March 1998. The proposed research was organized under four main tasks. Those tasks were: (1) Investigate the vertical and horizontal velocity structures within and adjacent to thin and subvisual cirrus; (2) Investigate the lowest 1 km of the PBL and develop algorithms for processing pulsed Doppler lidar data obtained from single shots into regions of significant inhomogeneities in Beta and U; (3) Participate in OSSEs including those designed to establish shot density requirements for meso-gamma scale phenomena with quasi-persistent locations (e.g., jets, leewaves, tropical storms); and (4) Participate in the planning and execution of an airborne mission to measure winds with a pulsed CO2 Doppler lidar. Over the four year period of this research contract, work on all four tasks has yielded significant results which have led to 38 professional presentations (conferences and publications) and have been folded into the science justification for an approved NASA space mission, SPARCLE (SPAce Readiness Coherent Lidar Experiment), in 2001. Also this research has, through Task 4, led to a funded proposal to work directly on a NASA field campaign, CAMEX III, in which an airborne Doppler wind lidar will be used to investigate the cloud-free circulations near tropical storms. Monthly progress reports required under this contract are on file. This final report will highlight major accomplishments, including some that were not foreseen in the original proposal. The presentation of this final report includes this written document as well as material that is better presented via the internet (web pages). There is heavy reference to appended papers and documents. Thus, the main body of the report will serve to summarize the key efforts and findings.

Emmitt, Dave↗
NASA NTRS2016

Surface Stress in Tropical Cyclone Observed by Scatterometer

Ocean surface wind (U) is air in motion and stress (τ) is the turbulent transport of momentum between the ocean and the atmosphere. While the strong wind of a tropical cyclone (TC) causes destruction at landfall, it is the surface stress that drags down the TC. There was almost no stress measurement except in dedicated field campaigns and the stress we used was almost entirely derived from wind through a drag coefficient (C(sub D)), as defined by C(sub D) = τ / ( ρ U(exp 2)). In TC, there is difficulty in measuring strong wind and large uncertainty in the drag coefficient.

Liu, W. Timothy↗
NASA NTRS2013

The Hurricane Imaging Radiometer: Present and Future

The Hurricane Imaging Radiometer (HIRAD) is an airborne passive microwave radiometer designed to provide high resolution, wide swath imagery of surface wind speed in tropical cyclones from a low profile planar antenna with no mechanical scanning. Wind speed and rain rate images from HIRAD's first field campaign (GRIP, 2010) are presented here followed, by a discussion on the performance of the newly installed thermal control system during the 2012 HS3 campaign. The paper ends with a discussion on the next generation dual polarization HIRAD antenna (already designed) for a future system capable of measuring wind direction as well as wind speed.

Miller, Timothy L.↗
NASA NTRS2001

TRMM Observations of Convective Regimes in the Amazon

This study utilizes TRMM satellite precipitation radar, lightning imaging sensor, and passive microwave imager data together with ground-based lightning data to investigate the vertical structure, lightning, and rainfall characteristics of Amazonian and central South American convection for three separate wet-seasons. These characteristics are partitioned as a function of 850 mb zonal wind direction, motivated by observations collected during the six-week TRMM-LBA field campaign. The TRMM-LBA field campaign observations suggest that systematic variations in Amazonian convective vertical structure, lightning, and rainfall are all linked to bimodal variations in the low-level zonal wind (e.g., easterly and westerly regimes). The more spatially and temporally comprehensive TRMM dataset used in this study extends the TRMM-LBA observations by examining regime variability in Amazonian and South American convective structure over a continental scale domain. On a continental-scale, patterns of east and west regime 850 mb winds combined with LIS lightning flash densities suggest the presence of synoptic-scale controls (e.g., intrusion of extratropical frontal systems and interaction with the SACZ) on regional-scale variability in convective vertical structure. TRMM PR, TMI and ground-based lightning data suggest that regional variability in wet-season convective structure is most evident over the southern Amazon, Mato Grosso, Altiplano, southern Brazil, and eastern coastal regions of central and southern South America. Convective vertical structure, rain fall rates, and lightning activity are all more pronounced during easterly (westerly) regimes over the southern Amazon and Mato Grosso (Altiplano, and southern Brazil). Importantly, when considered with case-study results from TRMM-LBA, the systematic differences in convective structure that occur as a function of regime suggest that associated regime-differences may exist in the vertical distribution of diabatic heating. Hence the discrimination of convective vertical structure "regimes" over parts of the Amazon and vicinity based on a resolved variable such as the 850 mb zonal wind direction, while far from being perfect, may have important applications to the problems of cumulus parameterization, rainfall estimation and retrievals of latent heating over the Amazon.

Petersen, W. A.↗