Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind resource characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Validation of Reanalysis-Based Offshore Wind Resource Characterization Using Lidar Buoy Observations

The offshore wind industry in the U.S. is gaining strong momentum to achieve sustainable energy goals, and the need for observations to provide resource characterization and model validation is greater than ever. Pacific Northwest National Laboratory (PNNL) operates two lidar buoys for the U.S. Department of Energy (DOE) in order to collect hub height wind data and associated meteorological and oceanographic information near the surface in areas of interest for offshore wind development. This work evaluates the performance of commonly used reanalysis products and spatial approximation techniques using lidar buoy observations off the coast of New Jersey and Virginia, USA. Reanalysis products are essential tools in order to set performance expectations and quantify the wind resource variability at a given site. Long-term accurate observations at typical wind turbine hub-heights have been lacking at offshore locations. Using wind speed observations from both lidar buoy deployments, biases and degrees of correspondence for the Modern Era Retrospective Analysis for Research and Applications-2 (MERRA-2), the North American Regional Reanalysis (NARR), and the analysis system of the Rapid Refresh (RAP) are examined both at hub height and near surface. Results provide insights on the performance and uncertainty of using reanalysis products for long-term wind resource characterization.

lidar buoy, model validation, offshore wind energy↗
DOE OSTI2019

Contributing to Long-term Wind Resource Characterization through Buoy-based Observations of Meteorological and Oceanographic Conditions

The U.S. Department of Energy (DOE) supports development of renewable power generation within the U.S. with increasing emphasis on offshore wind energy. This development is currently impeded by a lack of long-term wind observations above the ocean surface at wind turbine rotor plane heights. Pacific Northwest National Laboratory (PNNL) procured two AXYS WindSentinelTM buoys on behalf of DOE to support offshore wind resource assessment. The buoys are available for loan to qualified users according to agency priorities. The Lidar Buoy Loan Program represents an opportunity for organizations with an interest in offshore wind energy to work together with DOE to provide valuable meteorological and oceanographic data to the offshore community that is needed for offshore wind resource characterization. The buoys have already begun to fill observational gaps in offshore winds during long-term deployments off the coasts of Virginia and New Jersey and are scheduled for deployment off the coast of California in 2020. This paper provides an overview of the Lidar Buoy Loan Program, along with highlights of previous deployments, a summary of the upgrades to the lidar systems, and a discussion of the planned activities related to the buoys and the Lidar Buoy Loan Program.

floating lidar, offshore wind energy, wind resourc↗
DOE OSTI2020

Advancing Offshore Wind Resource Characterization Using Buoy-based Observations

As countries continue to implement sustainable and renewable energy goals, the need for affordable low-carbon technologies, including those related to offshore wind energy, is accelerating. The U.S. federal government recognizes the environmental and economic benefits of offshore wind development and is taking the necessary steps to overcome critical challenges facing the industry to realize these benefits. The U.S. Department of Energy (DOE) is investing in buoy-mounted lidar systems to facilitate offshore measurement campaigns that will advance our understanding of the offshore environment and provide the observational data needed for model validation, particularly at hub height where offshore observations are particularly lacking. On behalf of the DOE, Pacific Northwest National Laboratory manages a Lidar Buoy Program that facilitates meteorological and oceanographic data collection using validated methods to support the U.S. offshore wind industry. Since being acquired in 2014, two DOE lidar buoys have been deployed on the U.S. east and west coasts; and their data represent the first publicly available multi-seasonal hub height data to be collected in U.S. waters. In addition, the buoys have undergone performance testing, significant upgrades, and a lidar validation campaign to ensure the accuracy and reliability of the lidar data needed to support wind resource characterization and model validation. The Lidar Buoy Program is providing valuable offshore data to the wind energy community, while focusing data collection on areas of acknowledged high priority.

offshore wind energy, lidar buoy, wind resource ch↗
DOE OSTI2022

Scientific challenges to characterizing the wind resource in the marine atmospheric boundary layer

Abstract. With the increasing level of offshore wind energy investment, it is correspondingly important to be able to accurately characterize the wind resource in terms of energy potential as well as operating conditions affecting wind plant performance, maintenance, and lifespan. Accurate resource assessment at a particular site supports investment decisions. Following construction, accurate wind forecasts are needed to support efficient power markets and integration of wind power with the electrical grid. To optimize the design of wind turbines, it is necessary to accurately describe the environmental characteristics, such as precipitation and waves, that erode turbine surfaces and generate structural loads as a complicated response to the combined impact of shear, atmospheric turbulence, and wave stresses. Despite recent considerable progress both in improvements to numerical weather prediction models and in coupling these models to turbulent flows within wind plants, major challenges remain, especially in the offshore environment. Accurately simulating the interactions among winds, waves, wakes, and their structural interactions with offshore wind turbines requires accounting for spatial (and associated temporal) scales from O(1 m) to O(100 km). Computing capabilities for the foreseeable future will not be able to resolve all of these scales simultaneously, necessitating continuing improvement in subgrid-scale parameterizations within highly nonlinear models. In addition, observations to constrain and validate these models, especially in the rotor-swept area of turbines over the ocean, remains largely absent. Thus, gaining sufficient understanding of the physics of atmospheric flow within and around wind plants remains one of the grand challenges of wind energy, particularly in the offshore environment. This paper provides a review of prominent scientific challenges to characterizing the offshore wind resource using as examples phenomena that occur in the rapidly developing wind energy areas off the United States. Such phenomena include horizontal temperature gradients that lead to strong vertical stratification; consequent features such as low-level jets and internal boundary layers; highly nonstationary conditions, which occur with both extratropical storms (e.g., nor'easters) and tropical storms; air–sea interaction, including deformation of conventional wind profiles by the wave boundary layer; and precipitation with its contributions to leading-edge erosion of wind turbine blades. The paper also describes the current state of modeling and observations in the marine atmospheric boundary layer and provides specific recommendations for filling key current knowledge gaps.

17 WIND ENERGY↗
DOE OSTI2022

Offshore reanalysis wind speed assessment across the wind turbine rotor layer off the United States Pacific coast

Abstract. The California Pacific coast is characterized by considerable wind resource and areas of dense population, propelling interest in offshore wind energy as the United States moves toward a sustainable and decarbonized energy future. Reanalysis models continue to serve the wind energy community in a multitude of ways, and the need for validation in locations where observations have been historically limited, such as offshore environments, is strong. The U.S. Department of Energy (DOE) owns two lidar buoys that collect wind speed observations across the wind turbine rotor layer along with meteorological and oceanographic data near the surface to characterize the wind resource. Lidar buoy data collected from recent deployments off the northern California coast near Humboldt County and the central California coast near Morro Bay allow for validation of commonly used reanalysis products. In this article, wind speeds from the Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2), the Climate Forecast System version 2 (CFSv2), the North American Regional Reanalysis (NARR), the European Centre for Medium-Range Weather Forecasts Reanalysis version 5 (ERA5), and the analysis system of the Rapid Refresh (RAP) are validated at heights within the wind turbine rotor layer ranging from 50 to 100 m. The validation results offer guidance on the performance and uncertainty associated with utilizing reanalyses for offshore wind resource characterization, providing the offshore wind energy community with information on the conditions that lead to reanalysis error. At both California coast locations, the reanalyses tend to underestimate the observed rotor-level wind resource. Occasions of large reanalysis error occur in conjunction with stable atmospheric conditions, wind speeds associated with peak turbine power production (> 10 m s−1), and mischaracterization of the diurnal wind speed cycle in summer months.

17 WIND ENERGY↗
DOE OSTI2026

Performance of reanalysis and mesoscale models off the coast of Hawai'i

The eastern Hawai'i coast in the United States is characterized by considerable wind resource fuelled by persistent trade winds, making it an important area for energy research. The need is strong for reanalyses and higher-resolution regional simulations where observations have been historically limited, such as Hawai'i's offshore environments. However, studies using offshore observations in other parts of the world have shown that significant errors can occur in reanalyses and wind datasets, which can lead to inaccurate estimates of wind energy generation, payback periods, and extreme weather risks at project locations. The degree of such errors is influenced by a number of factors, including spatial resolution and the handling of processes within the planetary boundary layer (PBL). In this work, we provide a wind resource characterization from year-long lidar buoy measurements off the eastern coast of O'ahu, Hawai'i, an environment previously unobserved at the rotor level, and use the characterization to evaluate the performance of two simulation datasets. The O'ahu deployment location is meteorologically unique and less complex than land-based wind resource characterizations, being strongly characterized by trade winds with minimal land–atmosphere interaction influences. Despite the unique and fairly consistent meteorological conditions, we hypothesize that distinct simulation datasets will exhibit diverse ranges of errors similar to those that have been seen for other offshore locations. We find the European Centre for Medium-Range Weather Forecasts (ECMWF) Reanalysis version 5 (ERA5) to strongly underestimate observed wind speeds at the O'ahu location (bias = −1.54 m s −1 at a height of 140 m above sea level), while a regional Weather Research and Forecasting Model (WRF) simulation produced by the University of Hawai'i (UH-WRF) provides a significantly smaller wind speed bias (−0.25 m s −1 ), highlighting the value of running regional, higher-resolution simulations. The large bias noted for ERA5 is driven by significant underestimation of fast wind speeds (>9 m s −1 ), which the study site is largely characterized by, along with discontinuities in the ERA5 diurnal cycle. We also speculate that the relative sparsity of observations for data assimilation in this remote part of the world could influence the performance of ERA5 and that challenges with characterizing island effects could impact the performance of both datasets.

17 WIND ENERGY↗
DOE OSTI2024

Assessing Impacts of Waves on Hub-Height Winds off the U.S. West Coast Using Lidar Buoys and Coupled Modeling Approaches

Given the importance of offshore wind energy development to the U.S. clean energy targets, it is vital to be able to characterize the wind resource in that environment accurately. Toward that end, two Bureau of Ocean Energy Management buoys equipped with Doppler lidar are being maintained by Pacific Northwest National Laboratory on behalf of the Department of Energy and deployed to regions of potential offshore wind development. In addition to standard meteorological and oceanographic measurements, the buoys document the wind profile between about 40 m and 250 m above the sea surface through Doppler lidar retrievals. After a multiyear deployment of two buoys along the U.S. East Coast, the buoys were redeployed to the U.S. West coast from 2020 – 2022 to locations near the Humboldt and Morro Bay lease areas. The buoys provide nearly continuous, multiyear datasets that can be used to evaluate predictions of hub-height (~100 m) wind speed for standard atmospheric models in the region. In the absence of measurements at the study site, offshore wind developers rely on model-based data to assess site conditions. Potential sources of model error in this environment include under-resolution or misrepresentation of coastal topographically forced flows, marine boundary layer dynamics and the evolution of their associated cloud and turbulence fields, the role of upwelling and other currents on surface heat fluxes into the boundary layer, and the impact of wave fields on surface momentum fluxes and thus the wind speed profile. In particular, most predictive models of wind speed do not predict wave fields at all, relying on parameterizations to represent their effects. In thus study, we focus on evaluating the role of wind / wave interactions on modeled hub-height wind speed and error by using the Coupled Ocean–Atmosphere–Wave–Sediment–Transport Modeling System to capture two-way interactions between an atmospheric model (Weather Research and Forecasting (WRF)) and a wave model (WAVEWATCHIII (WW3)) and compare to both stand-alone WRF and one-way coupled WRF / WW3 configurations. Our approach is similar to that used in Gaudet et al. (2022) to evaluate wind / wave coupling over the U.S. East Coast, but applied to the very different environment of the U.S. West Coast. We show examples for two cases, a cold-season frontal case and a warm-season low-level jet case. We find that wind / wave coupling makes little impact on model error for these cases at the location of the lidar buoys, for which other misrepresentations of model physics seems to be responsible for model-observation discrepancies. However, domain-wide evaluations, which also make use of the National Buoy Data Center network, show that a two-way coupling approach is less prone to systematic errors in the hub-height wind field than the one-way coupled approach. WRF resolution of kilometer-scale or less is needed to properly capture the sharp wind speed gradients that can be found along the coastline, and WW3 simulations driven by the downscaled WRF produce better bulk and spectral wave fields when compared to observations. Implications of the results for wind resource characterization are then discussed.

17 WIND ENERGY↗
DOE OSTI2021

A Twenty-Year Analysis of Winds in California for Offshore Wind Energy Production Using WRF v4.1.2

Offshore wind resource characterization in the United States relies heavily on simulated winds from numerical weather prediction (NWP) models, given the lack of hub-height observations offshore. One such NWP data set used extensively by U.S. stakeholders is the Wind Integration National Dataset (WIND) Toolkit, a 7-year time-series data set produced in 2013 by the National Renewable Energy Laboratory. In this study, we present an update to that data set for offshore California that leverages recent advancements in NWP modeling capabilities and extends the period of record to a full 20 years. The data set predicts a significantly larger wind resource (0.25–1.75 m s-1 stronger), including in three Call Areas that the Bureau of Ocean Energy Management is considering for commercial activity. We conduct a set of yearlong simulations to study factors that contribute to this increase in the modeled wind resource. The largest impact arises from a change in the planetary boundary layer parameterization from the Yonsei University scheme to the Mellor-Yamada-Nakanishi-Niino scheme and their diverging wind profiles under stable stratification. Additionally, we conduct a refined wind resource assessment at the three Call Areas, characterizing distributions of wind speed, shear, veer, stability, frequency of wind droughts, and power production. We find that, depending on the attribute, the new data set can show substantial disagreement with the WIND Toolkit, thereby driving important changes in predicted power.

49 EE - Wind and Water Power Program - Wind (EE-4W↗
DOE OSTI2022

Use of a Compliant Tether to Decouple Observation Buoy Motion for Auxiliary Wave Power

With the growth of the Blue Economy, the volume of data collection within the ocean environment has been rapidly increasing. Larger numbers of oceanographic, meteorological, and floating Light Detection And Ranging (LiDAR) buoys have been collecting high fidelity measurements while pushing against power budget limits. Power limitations lead to infrequent transmission of reduced data sets or recording data to local storage that must be physically collected when the buoy is serviced. Triton Systems, Inc. and its partners are developing a retrofittable wave energy converter (WEC) to provide auxiliary power to these observation buoys to increase mission duration and power budget, improve reliability, and reduce the need for service trips. One of the greatest challenges has been developing a method to interface Triton's WEC with these buoys without impacting measurement fidelity. This is especially critical for inertial wave and LiDAR wind measurements collected with sensors that could be adversely affected by additional buoy dynamics introduced by an integrated WEC. To address this, Triton and EOM Offshore developed a compliant tether to pair an observation buoy with a floating WEC while decoupling relative motion. Based on EOM's proven stretch hose technology, this compliant tether transmits power and data between the buoy-WEC system. In conclusion, modeling shows that the system has the potential to minimally adversely affect oceanographic, meteorological, wind resource characterization, and other measurements, with future testing scheduled to validate modeling efforts.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Sodar - Brady, TX - Processed Data

This dataset was produced from the raw sodar .txt files from the Brady, TX site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location.

17 WIND ENERGY↗
DOE OSTI2021

Sodar - Jayton, TX - Processed Data

This dataset was produced from the raw sodar .txt files from the Jayton, TX site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location.

17 WIND ENERGY↗
DOE OSTI2021

Sodar - Reagan, TX - Processed Data

This dataset was produced from the raw sodar .dat files from the Reagan, TX site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location.

17 WIND ENERGY↗
DOE OSTI2021

Sodar - Colorado City, TX - Processed Data

This dataset was produced from the raw sodar .txt files from the Colorado City, TX site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location.

17 WIND ENERGY↗
DOE OSTI2021

Sodar - Lubbock, TX - Processed Data

This dataset was produced from the raw sodar .mnd files from the Lubbock, TX site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location.

17 WIND ENERGY↗
DOE OSTI2021

Sodar - Cleburne, TX - Processed Data

This dataset was produced from the raw sodar .dat files from the Cleburne, TX site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location.

17 WIND ENERGY↗
DOE OSTI2021

Sodar - Ozona, TX - Processed Data

This dataset was produced from the raw sodar .dat files from the Ozona, TX site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location.

17 WIND ENERGY↗
DOE OSTI2021

Sodar - St. James, MN - Processed Data

This dataset was produced from the raw sodar .wtb files from the St. James, MN site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location.

17 WIND ENERGY↗
DOE OSTI2020

Tools Assessing Performance

For the distributed wind industry, it can be challenging to accurately predict the performance and annual energy production of projects prior to their installation. The U.S. Department of Energy’s Tools Assessing Performance (TAP) project aims to improve wind resource characterization, thereby reducing the uncertainty of project performance and financing costs, increasing consumer confidence, and lowering the levelized cost of distributed wind energy. A collaborative effort among DOE National Laboratories, TAP will create a computational framework that provides the distributed wind community with access to newly developed wind resource data and modeling capabilities. These capabilities will allow users to perform timely and accurate performance assessments for distributed wind projects at locations across the United States.

wind, distributed, tools, performance↗