Search NASA⌕ Search

SEARCH · Search NASA

Results for “x-ray photoelectron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Local Structural Coherence and Interfacial Charge Transfer in Cu 2 ⁢S/Mo⁢S 2 Heterostructure

Precise control over electronic coupling at nanoscale interfaces is critical for designing materials with tunable charge-transfer behavior and catalytic function. Heterostructures with locally coherent interfaces provide a platform for interrogating interfacial charge redistribution in coupled material systems. Here, we report Cu 2 ⁢S/Mo⁢S 2 heterostructures exhibiting nanoscale crystallographic alignment, which are synthesized through a rapid thermal transformation pathway. We employed electrochemical reduction reactions to probe interfacial charge transfer, revealing shifts in product distribution attributable to modified interfacial energetics, even in the absence of optimized catalytic performance. The observed formate Faradaic efficiency suggests that interfacial electronic modulation in the heterostructure shifts product selectivity towards formate, highlighting how interface-driven electronic modulation can direct reaction pathways and influence product selectivity. Optimizing catalyst loading, architecture, and reactor configuration will be critical for future improvement. Structural and compositional integrity were confirmed through powder x-ray diffraction, x-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. Electron transfer between Cu 2 ⁢S and Mo⁢S 2 domains was further evaluated by electrochemical impedance spectroscopy, while selected-area electron diffraction revealed local crystallographic alignment consistent with a local epitaxial relationship at the Cu 2 S/Mo⁢S 2 heterointerface. To illustrate the broader applicability of this approach, a Zn⁢S/Mo⁢S 2 heterostructure was also synthesized using the same microwave strategy, confirming the generalizability of interfacial engineering principles across metal sulfide-Mo⁢S 2 systems. Collectively, these findings demonstrate that controlled local epitaxial alignment serves as an effective design principle for tuning interfacial energetics and catalytic reactivity in complex heterostructure materials.

carbon capture & utilization↗
DOE OSTI2026

Nitrogenated Graphene Quantum Dot-Derived Copper Single-Atom Catalyst for Oxygen Reduction Reaction

Despite the promise of fuel cells as sustainable energy conversion technologies, their widespread adoption is hindered by the high cost of platinum group metal (PGM) catalysts, particularly for catalyzing the oxygen reduction reaction (ORR) at the cathode. Here, we report copper-based single-atom catalysts (Cu-SACs) as cost-effective non-PGM alternatives for ORR. The catalysts were synthesized via simple pyrolysis of pyrene-derived amine-terminated graphene quantum dots (GQDs) in the presence of nitrogen and metal precursors. The abundant nitrogen functionality in GQDs effectively stabilized isolated Cu atoms during their conversion to porous carbon. A subsequent acid-washing step yielded a high density of atomically dispersed Cu active sites. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and high-resolution scanning transmission electron microscopy (HR-STEM) confirmed the effective incorporation of isolated Cu atoms into the carbon matrix through copper–nitrogen (Cu-N) coordination. Electrochemical measurements revealed excellent ORR activity with a dominant four-electron pathway. This synthetic strategy provides a practical route to developing economically viable, non-precious metal catalysts.

catalysts↗
DOE OSTI2026

Identifying Decoherence Mechanisms in Superconducting Qubits through Advanced Materials Characterization

Although superconducting qubits have emerged as a leading technology platform for quantum computing through large improvements in device coherence times and gate fidelity in recent years, the presence of defects and impurities at the interfaces and surfaces in the constituent materials continue to limit performance and serve as a critical barrier in achieving scalable quantum systems. Understanding and eliminating these sources of quantum decoherence in superconducting qubit devices requires dedicated studies aimed at establishing robust structure-property relationships that will enable researchers to target and eliminate defects strategically. As part of the Superconducting Materials and Systems (SQMS) center, we have extensively employed state-of-the-art materials characterization techniques, including scanning/transmission electron microscopy, secondary ion mass spectrometry, atom probe tomography, x-ray diffraction, and x-ray photoelectron spectroscopy in conjunction with device measurements to elucidate such relationships. In this talk, I will discuss some of our recent findings, including linking atomic defects to microwave loss in surface oxides, linking impurities in the Josephson Junction to qubit parameters, and linking low temperature precipitates to device performance. By applying these insights, we have been able to strategically develop and implement mitigation strategies for reliable fabrication of high coherence superconducting qubits.

Murthy, A. [Fermilab] (ORCID:0000000176776866)↗
DOE OSTI2026

Identifying Decoherence Mechanisms in Superconducting Qubits through Advanced Materials Characterization

Although superconducting qubits have emerged as a leading technology platform for quantum computing through large improvements in device coherence times and gate fidelity in recent years, the presence of defects and impurities at the interfaces and surfaces in the constituent materials continue to limit performance and serve as a critical barrier in achieving scalable quantum systems. Understanding and eliminating these sources of quantum decoherence in superconducting qubit devices requires dedicated studies aimed at establishing robust structure-property relationships that will enable researchers to target and eliminate defects strategically. As part of the Superconducting Materials and Systems (SQMS) center, we have extensively employed state-of-the-art materials characterization techniques, including scanning/transmission electron microscopy, secondary ion mass spectrometry, atom probe tomography, x-ray diffraction, and x-ray photoelectron spectroscopy in conjunction with device measurements to elucidate such relationships. In this talk, I will discuss some of our recent findings, including linking atomic defects to microwave loss in surface oxides, linking impurities in the Josephson Junction to qubit parameters, and linking low temperature precipitates to device performance. By applying these insights, we have been able to strategically develop and implement mitigation strategies for reliable fabrication of high coherence superconducting qubits.

Murthy, A. [Fermilab] (ORCID:0000000176776866)↗
DOE OSTI2026

Complex spin structure in co-trimer-chain Li 2 Co 3 Se 4 O 12

Complex magnetic materials are extremely attractive for revealing unconventional spin states and novel magnetic excitations. Here, we report the structural, thermodynamic, and magnetic properties of a novel magnetic material Li 2 Co 3 Se 4 O 12 based on x-ray and neutron diffraction, specific heat, magnetization, and x-ray photoelectron spectroscopy measurements. X-ray and neutron diffraction refinements reveal two Co sites Co (1) and Co (2) even though both are in the octahedral environment. While they are not connected along the b and c directions, these octahedra are edge-shared forming the Co (2) – Co (1) – Co (2) trimer chain along the a direction. The magnetic susceptibility exhibits the Curie-Weiss (CW) temperature dependence at high temperatures (above ∼50 K) with the negative CW temperature, a dip centered at T ⁎ ∼ 8.0 K, and an antiferromagnetic transition at T N = 3.3 K. The specific heat confirms that there is a phase transition at T N and a hump at T ⁎ . The long-range magnetic transition at T N implies that, in addition to the intra-chain interaction, there is strong inter-chain interaction, which is likely due to polarized SeO 3 bridging between chains. Single crystal neutron diffraction refinement reveals a complex magnetic structure with the angle between Co (1) and Co (2) moments ∼105°. Within the Co (2) – Co (1) – Co (2) trimer, two Co (2) moments are parallelly aligned. Surprisingly, the Co (1) moment (1.92μB) is only half of the Co (2) moment (3.96μB). There is likely the spin-state change for Co (1) from the high-spin state at T > T ⁎ to the low-spin state at T < T ⁎ , causing a dip in the magnetic susceptibility and a hump in the specific heat. When the magnetic field is applied, multiple metamagnetic transitions are found in all directions, implying field-driven magnetic excitations. Our results demonstrate rich magnetic properties of Li 2 Co 3 Se 4 O 12 that are sensitive to the external stimuli such as the magnetic field.

Antiferromagnetism↗
DOE OSTI2026

2D in-Plane Ordered MXene Nanosheets Derived from (Mo 2/3 Er 1/3 ) 2 AlC Rare-Earth i-MAX for Energy Storage Applications

MXenes have become one of the most versatile families of two-dimensional (2D) materials due to their high conductivity, hydrophilicity, and remarkable electrochemical performance. This has stimulated intense efforts to design and synthesize MXenes, including structurally unique in-plane ordered 2D MXenes called i-MXenes. Here, we have synthesized the quaternary rare earth (RE)-based i-MAX phase (Mo 2/3 Er 1/3 ) 2 AlC using an arc melting method, and the corresponding 2D i-MXene was then obtained through a LiF/HCl soft etching process. Literature studies have shown that Al and the RE element are etched out during the etching process, leading to the formation of pure vacancy-ordered Mo1.33C 2D i-MXene. However, our investigation reveals that upon exposure to a fluorine solution, the i-MAX phase forms RE fluoride impurities, which are challenging to remove through HCl−DI water washing and persist in the final product, resulting in impure Mo 1.33 C@Er i-MXene. These results were confirmed by various characterizations such as X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and scanning transmission electron microscopy. Although the Mo 1.33 C@Er electrode showed a 24-fold increase in specific capacitance compared to its parent i-MAX phase, it still exhibited a high charge-transfer resistance arising from the insulating nature of RE fluoride byproducts, which adversely influence the overall capacitance behavior of the synthesized 2D Mo 1.33 C@Er i-MXenes. This study contributes to identifying pathways for the preparation of pure 2D i-MXenes from RE-based i-MAX phases and developing improved synthesis methods. With additional process optimization, the 2D i-MXene holds a strong potential for electrochemical energy storage applications. Additionally, the electronic structures of Mo 1.33 C were theoretically studied using first-principles density functional theory calculations, which revealed that pristine Mo 1.33 C is metallic, and this metallic nature is preserved even with −O, −F, and mixed functionalization.

chemical structure↗
DOE OSTI2025

Oxygen Reduction on Platinum-Nickel and Platinum-Cobalt Alloy Based Catalysts for High Temperature Proton Exchange Membrane Fuel Cells

Catalyst layers, with commercial PtNi/TKK (TECNiE52; platinum 46.5 wt%), PtCo/TKK (TEC36E52; platinum 45.8 wt%) catalysts, and an in-house catalyst PtNi-NC (platinum 38.4 wt%), synthesised using acoustic mixer and a tube furnace, are prepared using three different ionomers: 20 wt% Nafion®, 60 wt% polytetrafluoroethylene (PTFE), and an in-house 5 wt% ionomer (‘Ionomer X’). These inks are bar-coated onto carbon paper gas diffusion layers (GDLs), which are cut into 3 cm × 5 cm pieces. The coated layers are tested for oxygen reduction in a commercial gas diffusion electrode (GDE) test cell, FlexCell® (Gaskatel GmbH, Germany), using 85 wt% phosphoric acid at both room temperature and at 155°C. This study evaluates the polynorbornene (PNB)-based in-house ionomer performance as binder and in-house catalyst oxygen reduction reaction (ORR) activity in comparison to commercial products. The catalyst layers are characterised using X-ray diffraction (XRD) analysis, X-ray photoelectron spectroscopy (XPS), and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Among the catalyst layers prepared with PTFE ionomer and tested at 155°C, the in-house catalyst demonstrates the highest ORR activity. Ionomer X proves to be a good candidate to be used as a per- and polyfluoroalkyl-free binder for high-temperature (HT) proton exchange membrane fuel cell (PEMFC) applications.

85 wt% phosphoric acid↗
DOE OSTI2026

Influence of thermal treatment on structure and catalytic performance of ceria-zirconia supported copper oxide (CuO x /Ce y Zr 1-y O 2 ) catalysts for CO oxidation

Copper oxide (CuO x ) supported on ceria-zirconia (Ce y Zr 1-y O 2 , y = 1.0, 0.5, 0.0) catalysts were investigated to elucidate the effects of thermal treatment on their physicochemical properties and catalytic performance in carbon monoxide (CO) oxidation. Here, the catalysts were synthesized via a one-pot chemical vapor deposition (OP-CVD) method at 700˚C and 900˚C with controlled Cu loading. Characterization techniques, including synchrotron X-ray diffraction (S-XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), inductively coupled plasma spectroscopy (ICP), and N 2 adsorption-desorption, were implemented to probe the crystalline structure, molecular and electronic structure, oxygen vacancies, specific surface area (SSA) and metal loading. CO oxidation was chosen as a model reaction to explore the structure-catalytic performance relationship. A ∼100% CO conversion was achieved at < 150˚C, particularly with the CuO x /CeO 2 catalyst calcined at 700˚C. In contrast, calcination at 900˚C caused a ∼90% decrease in SSA and a ∼24% increase in T 50 . Activity tests revealed that increasing ZrO 2 content lowered CO oxidation activity despite generating more defect sites. In-situ measurement of the 700 °C calcined samples revealed the presence of stable and unstable defects in CuO x /Ce 0.5 Zr 0.5 O 2 and CeO 2 respectively, which play a key role in the activity of the catalysts. The results highlight that catalytic performance is closely related to the SSA. Furthermore, an optimum calcination temperature favor significant oxygen vacancy formation with required CuO x -support interactions, enhancing redox properties and catalytic performance.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Diethylenetriamine-functionalized graphene oxide: Insights into ion adsorption and applications in rare earth element separation

The growing demand for critical minerals and materials requires atom- and energy-efficient, selective separations to overcome the challenges posed by the similar chemical and physical properties of the rare earth elements (REEs) and their low concentrations in unconventional domestic feedstocks. Here, in this study, we developed diethylenetriamine-functionalized graphene oxide (DETA-GO) as a membrane material for REE adsorption and separation. Synthesis conditions were optimized to maximize nitrogen incorporation while also preserving GO dispersibility for facile membrane fabrication. We investigated the mechanism of amine functionalization, the nitrogen-bonding configurations, the organization of the interlayer transport channels, and the resulting effects on ion and water transport for REE separations. Neat-GO and DETA-GO multilayer laminate membranes were fabricated by vacuum filtration onto polymer supports. To investigate the effects of amine functionalization, the membranes were characterized using scanning electron microscopy, Raman, Fourier transform infrared, and X-ray photoelectron spectroscopy, as well as grazing-incidence X-ray diffraction measurements. Ion permeation experiments with representative lanthanum (La 3+ ) and ytterbium (Yb 3+ ) solutions revealed enhanced ion adsorption and water transport through DETA-GO membranes compared to neat-GO. The strong affinity of the membranes for multivalent REEs was also validated with conductivity and inductively coupled plasma mass spectrometry measurements. Atomistic insight into the role of amine functionalization in modulating nanochannel architecture and long-term stability, optimizing adsorption sites, and regulating REE and water transport was obtained using classical molecular dynamics simulations. Collectively, our joint experimental and theoretical study demonstrates the potential of DETA-GO membranes for selective REE separations, offering insights into ion-binding mechanisms, water-transport properties, and nanochannel optimization for the recovery of critical materials from aqueous feedstocks.

Adsorbent↗
DOE OSTI2026

Temperature-dependent dielectric function of tantalum nitride formed by atomic layer deposition for tunnel barriers in Josephson junctions

Here, we report the dielectric functions of insulating tantalum nitride (TaN) films deposited by atomic layer deposition (ALD) on 300 mm Si/SiO 2 substrates to evaluate their suitability as tunnel barriers in tantalum-based Josephson junctions (JJs) for superconducting quantum circuits. Temperature-dependent ellipsometric angles were measured for ALD TaN films with nominal thicknesses of 13 and 25 nm at an incidence angle of 70°, over photon energy ranges of 0.03–0.7 eV (80–300 K) and 0.5–6.5 eV (80–600 K). These data were used to develop a dispersion model for insulating ALD TaN that incorporates a Tauc–Lorentz oscillator with an optical bandgap of 1.5–1.8 eV to describe interband transitions. The extracted dielectric function shows insulating behavior (mid-infrared transparency) at all temperatures and for both film thicknesses tested. In particular, ALD TaN does not exhibit infrared absorption due to free carriers, even at elevated temperatures, consistent with the insulating behavior required for a JJ tunnel barrier. Results from transmission electron microscopy (including selected area electron diffraction) and x-ray diffraction are also discussed. Sputter depth-profile x-ray photoelectron spectroscopy shows an N/Ta ratio of ∼1.2 throughout the film. The lower bandgap, low roughness, and thermal stability of ALD TaN compared to AlO x suggest the possibility of fabricating JJs with thicker barriers while achieving critical current densities required for qubits, enabling improved thickness and composition control, reduced topography, and resistance to aging.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of Preparation Conditions of Fe@SiO2 Catalyst on Its Structure Using High-Pressure Activity Studies in a 3D-Printed SS Microreactor

Fischer–Tropsch synthesis (FTS) in a 3D-printed stainless steel (SS) microchannel microreactor was investigated using Fe@SiO2 catalysts. The catalysts were prepared by two different techniques: one pot (OP) and autoclave (AC). The mesoporous structure of the two catalysts, Fe@SiO2 (OP) and Fe@SiO2 (AC), ensured a large contact area between the reactants and the catalyst. They were characterized by N2 physisorption, H2 temperature-programmed reduction (H2-TPR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron microscopy (XPS), and thermogravimetric analysis–differential scanning calorimetry (TGA-DSC) techniques. The AC catalyst had a clear core–shell structure and showed a much greater surface area than that prepared by the OP method. The activities of the catalysts in terms of FTS were studied in the 200–350 °C temperature range at 20-bar pressure with a H2/CO molar ratio of 2:1. The Fe@SiO2 (AC) catalyst showed higher selectivity and higher CO conversion to olefins than Fe@SiO2 (OP). Stability studies of both catalysts were carried out for 30 h at 320 °C at 20 bar with a feed gas molar ratio of 2:1. The Fe@SiO2 (AC) catalyst showed higher stability and yielded consistent CO conversion compared to the Fe@SiO2 (OP) catalyst.

Biochemistry & Molecular Biology↗
DOE OSTI2026

Expanding the Zinc Precursor Toolbox: A Comparative Study of Precursors for Thermal ALD of ZnO Thin Films

Atomic layer deposition (ALD) of zinc oxide (ZnO) has been widely researched using diethyl zinc (DEZ)-based methods. The significant importance of thin films of ZnO as transparent conductive oxides (TCO) in optoelectronic devices and photovoltaics warrants examining alternative Zn precursors for ZnO ALD as potential replacements for the pyrophoric DEZ. In this study, we investigated three alternative Zn precursors: Zn(EEKI)2, Zn(DMP)2, ZnEt(HMDS), in the process development for high-quality ZnO thin films and compared them to DEZ. The ALD processes were studied using in situ spectroscopic ellipsometry. The properties of the ALD ZnO films were characterized using ex situ X-ray photoelectron spectroscopy (XPS), Rutherford backscattering spectrometry and nuclear reaction analysis (RBS/NRA), X-ray diffraction (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM), and ultraviolet-visible (UV/Vis) spectrophotometry. These measurements confirmed the formation of pure, stoichiometric, and polycrystalline ZnO films using all four Zn precursors. Although the selected precursors are chemically diverse Zn compounds, they all yielded saturating ALD processes and high-quality ZnO thin films at 200 °C. This study highlights the potential benefits of alternative zinc precursors in designing ALD processes for ZnO thin films.

Obenlüneschloß, Jorit↗
DOE OSTI2026

Plasma-Enhanced Atomic Layer Deposition Synthesis of Nanolayered Molybdenum Diselenide (MoSe 2 ) Thin Films for Nanoelectronics

Nanolayered molybdenum diselenide (MoSe 2 ) thin films were synthesized by plasma-enhanced atomic layer deposition (PE-ALD) using molybdenum pentachloride (MoCl 5 ) and diethyldiselenide (C 4 H 10 Se 2 ) precursors. Scanning and transmission electron microscopy revealed horizontally stacked nanolayers near the substrate and vertically oriented nanosheets at the surface of the film. X-ray diffraction confirmed the (002), (100), and (110) reflections of crystalline MoSe 2 , while X-ray photoelectron spectroscopy showed relative atomic concentrations of 33.5% Mo and 66.5% Se, consistent with stoichiometric MoSe 2 . Raman spectra exhibited characteristic E 1g , A 1g , and E$^1_{2g}$ vibrational modes. Field-effect transistors incorporating PE-ALD-grown MoSe 2 as the channel material displayed p-type behavior, demonstrating the potential of nanolayered MoSe 2 for nanoelectronic applications. This work demonstrates the feasibility of low-temperature, stoichiometric growth of nanolayered MoSe 2 by PE-ALD and its direct integration into transistor architectures.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Fe-single atom catalysts facilitate fast electron transfer with MoS 2 /SnS 2 cathodes in lithium–sulfur batteries

Lithium–sulfur batteries (LSBs) emerge as promising next-generation energy storage systems offering cost-effectiveness, environmental friendliness, and high theoretical energy density. The practical implementation of LSBs faces significant hindrances due to the shuttle effect and sluggish redox reactions. To address these challenges, single-atom catalyst (SAC) based combination materials from d-block elements can offer increased active catalytic sites, rapid charge transfer, accelerated electron migration, and fast sulfur redox conversion kinetics of lithium polysulfides (LiPSs). In this study, we fabricated three different LSB cathodes: pure S, S@MoS 2 /SnS 2 , and S@Fe–MoS 2 /SnS 2 . These cathodes were then used to explore the cycle life, capacity, rate capability, and redox kinetic reactions of LiPSs while assessing the influence of Fe-SACs on their performance. As a result, LSBs with S@Fe–MoS 2 /SnS 2 cathodes demonstrate an extended cycle life of 1000 cycles at a C-rate of 0.2C, maintaining a capacity close to 500 mA h g −1 , the highest initial discharge capacity of 1622 mA h g −1 and 1066 mA h g −1 at 0.05C and 0.2C, and excellent rate capabilities of 708 mA h g −1 and 558 mA h g −1 at 1C and 2C, respectively. The synergistic effect of the Fe-SAC-based combination cathode (S@Fe–MoS 2 /SnS 2 ) creates plentiful adsorptive and highly active catalytic sites, resulting in substantially enhanced capacity for adsorbing soluble long-chain LiPSs. This facilitates ultra-fast redox kinetics, surpassing the performance of the S@MoS 2 /SnS 2 and pure S cathodes. In the ex situ analysis, results from powder X-ray diffraction (XRD) to observe the new phase, soft X-ray absorption spectroscopy (XAS) to investigate the electronic structure, and hard X-ray photoelectron microscopy (HAXPES) with different energies (900 eV, 2000 eV, and 6000 eV) to track the chemical-state evolution of Fe-SACs in MoS 2 /SnS 2 cathodes displayed notable electrochemical reversibility involving S 8 ⇄ LiPSs ⇄ Li 2 S conversion even after 1000 cycles. Additionally, in situ, operando Raman analysis can unveil a novel catalytic mechanism of Fe-SACs in MoS 2 /SnS 2 “facilitating rapid electron transfer” during the discharge and charge processes of LSBs involving the conversion of S 8 ⇄ long-chain LiPSs ⇄ Li 2 S 2 /Li 2 S. This study elucidates the working mechanism of Fe-SAC cathodes, offering insights into overcoming the shuttle effect and facilitating sulfur redox kinetics to advance commercial LSBs.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Synthesis and composition control of epitaxial FeWO4 thin films using pulsed laser deposition

We report the growth of epitaxial FeWO4 thin films on c-plane sapphire via pulsed laser deposition using a Fe 2 O 3 /WO 3 target ablated in an O 2 atmosphere. At a constant O 2 pressure of 1 mTorr, x-ray diffraction (XRD) confirms FeWO 4 as the major crystalline phase for substrate temperatures from 500 to 800 °C. As temperature increases, x-ray fluorescence (XRF) shows the Fe/W ratio remains nearly constant at 0.90 ± 0.02, while x-ray photoelectron spectroscopy (XPS) shows Fe 3+ to Fe 2+ conversion increases from 20% to 35%. Morphological analysis reveals phase separation, likely of amorphous Fe 3+ oxide from crystalline FeWO 4 , increasing with Fe 3+ conversion. This is attributed to an O-rich laser ablated flux, where conversion is driven by the Arrhenius temperature dependence of Fe 3+ → Fe 2+ reduction on the film surface. At a constant substrate temperature of 750 °C, XRD confirms FeWO 4 formation for O 2 pressures from 0.5 to 10 mTorr. As pressure increases, XRF shows the Fe/W ratio decreases from 0.98 to 0.70, while XPS shows Fe 3+ conversion rises from 15% to 70%. Morphology shows phase separation decreasing with increasing Fe 3+ conversion. This is attributed to scattering, where higher O 2 pressure makes the laser ablated flux O-deficient relative to Fe and W, facilitating Fe 2+ formation. Films with Fe 3+ conversion above ∼30% and Fe/W ratios from 0.86 to 0.96 exhibit FeWO 4 optical and electronic properties suitable for photoanode applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Visualization of the surface distribution of photocatalytic activity at the anatase/rutile TiO2 interface using X-ray photoelectron emission microscopy

We applied X-ray photoelectron emission microscopy (XPEEM) to visualize the surface distribution of photocatalytic activity at the anatase/rutile (A/R) interface of titanium dioxide. Acetic acid was adsorbed on the surface, and its decomposition and desorption reactions under ultraviolet light irradiation were monitored by observing C 1s spectra, enabling direct observation of the spatial distribution of photocatalytic activity. Complementary crystal structure information was obtained using spatially resolved low-energy electron diffraction, low-energy electron microscopy, X-ray absorption spectroscopy, and micro-focused Raman spectroscopy. Comparison with these structural data allowed for the evaluation of the photocatalytic activity as a function of the distance from the A/R interface. The activity is enhanced in the vicinity of the interface and gradually decreases toward both the anatase and rutile regions. These results demonstrate that XPEEM is an effective technique for spatially resolved mapping of photocatalytic activity, which has\\r\\npreviously been inaccessible using conventional characterization techniques.

25 ENERGY STORAGE↗
DOE OSTI2026

Electron-Deficient Phenazines: Synthesis, Structures, Redox, and Optoelectronic Properties in the Gas Phase, in Solution, and in the Solid State

High-temperature gas-phase reactions of 1,4-C4F8I2 with phenazine (PHNZ) afforded new thermally- and air-stable derivatives with cyclo-C4F8 substituents, viz. 1,2-PHNZ(C4F8), 2,3-PHNZ(C4F8), 1,2:6,7-PHNZ(C4F8)2, 1,2:7,8-PHNZ(C4F8)2, and 1,2:8,9-PHNZ(C4F8)2. Reactions in the presence of Cu powder resulted in reductive-defluorination/aromatization of some of the cyclo-C4F8 substituents to produce 2,3-PHNZ(C4F4), 2,3-PHNZ(C4HF3), and 1,2:6,7-PHNZ(C4F8)(C4F4), which are formally tri- or tetrafluoro derivatives of benzo[a]phenazine. Single-crystal X-ray diffraction structures of these compounds demonstrate the planarity of 2,3-PHNZ(C4F4) and 2,3-PHNZ(C4HF3) and ordered p-stacking in 1,2-PHNZ(C4HF3), 1,2-PHNZ(C4F4), 1,2-PHNZ(C4F8), and 2,3-PHNZ(C4F8). Low-temperature gas-phase photoelectron spectra of the PHNZ(C4F8)1,2 compounds show that they are strong electron acceptors, with the three PHNZ(C4F8)2 isomers having electron affinities exceeding that of C60. Cyclic voltammetry in acetonitrile show that the five PHNZ(C4F8)1,2 compounds exhibit reversible one-electron reductions with large positive shifts in their reduction potentials relative to unsubstituted PHNZ. Spectroelectrochemical absorption and EPR spectra of PHNZ(C4F8)1,2- • anion radicals and extensive DFT calculations revealed the significant role that the different substitution patterns have on determining the optoelectronic properties of the PHNZ(C4F8)1,2 derivatives and PHNZ(C4F8)1,2- • anion radicals. Time-resolved microwave conductivity measurements and photoluminescence spectra of blends of the PHNZ(C4F8)1,2 derivatives with the donor poly(3-hexylthiophene) (P3HT) were recorded to assess the possible use of the new compounds in optoelectronic devices.

Balser, Sebastian↗
DOE OSTI2026

Ammonolysis with N 2 -diluted NH 3 suppresses Ta( IV ) defects in BaTaO 2 N and enhances photocatalytic water oxidation

BaTaO 2 N stands out among oxynitride photocatalysts because of its ability to capture visible light and to drive the photoelectrochemical water oxidation reaction. However, its solar energy conversion performance is limited by electron–hole recombination at Ta( IV ) defects in the material. These defects are formed by overreduction of the Ta(v) oxide precursor by excess ammonia under the high temperature conditions during ammonolysis. Here we show for the first time that Ta( IV ) defect concentrations can be lowered by conducting the ammonolysis reaction in mixed NH 3 /N 2 gas. The obtained BaTaO 2 N samples crystallize in the cubic CaTiO 3 structure type and form 200–300 nm faceted nanocrystals, based on X-ray diffraction, scanning electron microscopy, and HRTEM. Electron paramagnetic resonance spectra observe the Ta( IV ) defects at g = 1.999 and confirm an 11-fold reduction for the product synthesized in mixed (0.13 : 1.0 vol) NH 3 /N 2 gas, equivalent to 1.14 × 10 16 cm −3 Ta( IV ) ions. This optimized BaTaO 2 N has nearly twice the photocatalytic oxygen evolution activity (AQE of 6.78% at 400 nm) of a reference material made with 1.0 atm ammonia and 78% higher photoelectrochemical water oxidation photocurrent (0.9 mA cm −2 at 1.23 V vs. RHE) under simulated sunlight. According to X-ray photoelectron spectroscopy, remaining Ta( IV ) defects are concentrated in the surface region of the BaTaO 2 N particles, where >50% of all Ta ions are found in the +4 oxidation state. This surface Ta( IV ) population can be directly observed in Vibrating Kelvin Probe Surface Photovoltage Spectra (VK-SPV) via its 1.2–1.4 eV photovoltage onset. Here, it suggests that the surface Ta( IV ) ions contribute empty d-states 0.5–0.7 eV below the BaTaO 2 N conduction band edge. These findings highlight how the energetics and concentrations of Ta( IV ) defects influence the photoelectrochemical water oxidation ability of BaTaO 2 N. Additionally, the work establishes ammonolysis with diluted NH 3 as a new tool to minimize defects in BaTaO 2 N and to raise its solar energy conversion efficiency toward its theoretical limit. Because of its simplicity, the reduced ammonia pressure strategy will likely be applicable to other oxynitrides, which generally suffer from overreduction problems during ammonolysis.

Salmanion, Mahya [University of California, Davis,↗