Search NASA⌕ Search

SEARCH · Search NASA

Results for “yeast lipids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Lipid accumulation in nitrogen and phosphorus-limited yeast is caused by less growth-related dilution

Oleaginous yeasts are used commercially to produce oleochemicals and hold potential also for biodiesel production. In response to nitrogen or phosphorous limitation, oleaginous yeasts accumulate lipids in the form of triacylglycerols. Previous work has investigated potential mechanisms by which nutrient limitation induces lipid biosynthesis without verifying whether lipid biosynthesis flux is actually enhanced. Here, in this work, we show, using 13C-glucose tracing, that in nitrogen or phosphorous limitation, lipid accumulation occurs without consistent increases in biosynthetic flux. Instead, the main driver of increased lipid pools is decreased growth-related dilution. This conclusion holds across two divergent oleaginous yeasts: Rhodotorula toruloides and Yarrowia lipolytica . Quantitative proteomics shows a substantial proteome reallocation in response to nitrogen and phosphorous limitation, with ribosomal proteins strongly downregulated, while lipid enzymes are preserved but not consistently upregulated in absolute quantity. Thus, nutrient limitation, rather than triggering greatly enhanced lipid synthesis, results in roughly sustained lipid enzyme levels and biosynthetic flux. Due to slower lipid dilution by cell division, this suffices to drive marked lipid accumulation.

09 BIOMASS FUELS↗

Hydrothermal conditioning of oleaginous yeast cells to enable recovery of lipids as potential drop-in fuel precursors

Abstract Background Lipids produced using oleaginous yeast cells are an emerging feedstock to manufacture commercially valuable oleochemicals ranging from pharmaceuticals to lipid-derived biofuels. Production of biofuels using oleaginous yeast is a multistep procedure that requires yeast cultivation and harvesting, lipid recovery, and conversion of the lipids to biofuels. The quantitative recovery of the total intracellular lipid from the yeast cells is a critical step during the development of a bioprocess. Their rigid cell walls often make them resistant to lysis. The existing methods include mechanical, chemical, biological and thermochemical lysis of yeast cell walls followed by solvent extraction. In this study, an aqueous thermal pretreatment was explored as a method for lysing the cell wall of the oleaginous yeast Rhodotorula toruloides for lipid recovery. Results Hydrothermal pretreatment for 60 min at 121 °C with a dry cell weight of 7% (w/v) in the yeast slurry led to a recovery of 84.6 ± 3.2% (w/w) of the total lipids when extracted with organic solvents. The conventional sonication and acid-assisted thermal cell lysis led to a lipid recovery yield of 99.8 ± 0.03% (w/w) and 109.5 ± 1.9% (w/w), respectively. The fatty acid profiles of the hydrothermally pretreated cells and freeze-dried control were similar, suggesting that the thermal lysis of the cells did not degrade the lipids. Conclusion This work demonstrates that hydrothermal pretreatment of yeast cell slurry at 121 °C for 60 min is a robust and sustainable method for cell conditioning to extract intracellular microbial lipids for biofuel production and provides a baseline for further scale-up and process integration. Graphical abstract

09 BIOMASS FUELS↗

Data for Hydrothermal Conditioning of Oleaginous Yeast Cells to Enable Recovery of Lipids as Potential Drop-in Fuel Precursors

Lipids produced using oleaginous yeast cells are an emerging feedstock to manufacture commercially valuable oleochemicals ranging from pharmaceuticals to lipid-derived biofuels. Production of biofuels using oleaginous yeast is a multistep procedure that requires yeast cultivation and harvesting, lipid recovery, and conversion of the lipids to biofuels. The quantitative recovery of the total intracellular lipid from the yeast cells is a critical step during the development of a bioprocess. Their rigid cell walls often make them resistant to lysis. The existing methods include mechanical, chemical, biological and thermochemical lysis of yeast cell walls followed by solvent extraction. In this study, an aqueous thermal pretreatment was explored as a method for lysing the cell wall of the oleaginous yeast Rhodotorula toruloides for lipid recovery. Hydrothermal pretreatment for 60 min at 121 °C with a dry cell weight of 7% (w/v) in the yeast slurry led to a recovery of 84.6 ± 3.2% (w/w) of the total lipids when extracted with organic solvents. The conventional sonication and acid-assisted thermal cell lysis led to a lipid recovery yield of 99.8 ± 0.03% (w/w) and 109.5 ± 1.9% (w/w), respectively. The fatty acid profiles of the hydrothermally pretreated cells and freeze-dried control were similar, suggesting that the thermal lysis of the cells did not degrade the lipids. This work demonstrates that hydrothermal pretreatment of yeast cell slurry at 121 °C for 60 min is a robust and sustainable method for cell conditioning to extract intracellular microbial lipids for biofuel production and provides a baseline for further scale-up and process integration.

Conversion↗

Economic and environmental bottlenecks in the industrial‐scale production of lipid‐derived biofuels from oleaginous yeasts: A review of the current trends and future prospects

Abstract Concerns about climate change and the reliance on fossil fuel reserves have motivated researchers to identify new renewable sources of energy. Biomass holds the potential to replace fossil‐derived products with biofuels and bio‐based chemicals. Plant‐derived lipids are promising sources of biofuels; however, the production of plant oil often leads to the release of massive amounts of carbon dioxide due to deforestation and land‐use change. The production of biofuels via plant oils (such as soybean) also competes with food production and in turn, impacts biodiversity. To mitigate these issues, the production of lipids from oleaginous yeasts could be an excellent alternative by incorporating these microbes into biorefineries utilizing agricultural or forest residues. Eventually, these microbial lipids could be potential sources for producing lipid‐derived biofuels. However, the current conventional methods for the production and recovery of lipids from oleaginous microbes suffer from economic and ecological challenges that affect its industrial‐scale expansion. This review highlights the major economic and environmental bottlenecks for the production of lipid‐derived biofuels from oleaginous yeasts. It also provides perspectives on the strategies that could be adapted on economic and ecological fronts to assist the expansion of the production of microbial lipid‐derived biofuels at an industrial scale.

Agriculture↗

Lipids from High-Protein Algae Biomass

Biofuels from renewable and sustainable sources will be a critical component of reducing greenhouse gasses. To this end, in achieving maximum biomass productivity in outdoor ponds at a reasonable cost, algae must be grown at a maximal rate. This current algae cultivation strategy results in high-protein biomass because there is insufficient time for deplete-hold steps that increase lipids but also cost. Thus methods to convert high-protein (>50%) need to be developed for biofuels. The Consolidated Algae Processing (CAP) strategy has previously shown utility on high-carbohydrate algae biomass and has now been expanded to include methods aimed at converting the protein fraction to lipids. After acid-pretreatment, hydrolysate liquor is oxidatively treated to deaminate and convert soluble proteins and amino acids into four main carboxylate acids; formic, acetic, succinic, and propionic. These acids are readily and completely fermented into intracellular lipids using oleaginous yeast. Using a fed-batch fermentation strategy and no added nutrients, we achieved nearly 30% intracellular lipids and 1.3 g/L lipids demonstrating the potential of our expanded CAP process to generate additional lipids for conversion to biofuels as part of an algae-focused biorefinery.

AAD↗

Data for Tolerance of Engineered Rhodosporidium toruloides to Sorghum Hydrolysates During Batch and Fed-Batch Lipid Production

Oleaginous yeasts are a promising candidate for the sustainable conversion of lignocellulosic feedstocks into fuels and chemicals, but their growth on these substrates can be inhibited as a result of upstream pretreatment and enzymatic hydrolysis conditions. Previous studies indicate a high citrate buffer concentration during hydrolysis inhibits downstream cell growth and ethanol fermentation in Saccharomyces cerevisiae . In this study, an engineered Rhodosporidium toruloides strain with enhanced lipid accumulation was grown on sorghum hydrolysate with high and low citrate buffer concentrations. Both hydrolysis conditions resulted in similar sugar recovery rates and concentrations. No significant differences in cell growth, sugar utilization rates, or lipid production rates were observed between the two citrate buffer conditions during batch fermentation of R. toruloides . Under fed-batch growth on low-citrate hydrolysate a lipid titer of 16.7 g/L was obtained. Citrate buffer was not found to inhibit growth or lipid production in this engineered R. toruloides strain, nor did reducing the citrate buffer concentration negatively affect sugar yields in the hydrolysate. As this process is scaled-up, $131 per ton of hydrothermally pretreated biomass can be saved by use of the lower citrate buffer concentration during enzymatic hydrolysis.

Conversion↗

Lipids accumulation in nitrogen and phosphorus-limited yeast is caused by less growth-related dilution

Oleaginous yeasts are used commercially to produce oleochemicals and hold potential also for biodiesel production. In response to nitrogen or phosphorous limitation, oleaginous yeast accumulate triacylglycerol. Previous work has investigated potential mechanisms by which nutrient limitation induces lipid biosynthesis without verifying whether lipid biosynthesis flux is actually enhanced. Here we show, using 13C-glucose tracing, that in nitrogen or phosphorous limitation, lipid accumulation occurs without consistent increases in biosynthetic flux. Instead, the main driver of increased lipid pools is decreased growth-related dilution. This conclusion holds across two divergent oleaginous yeasts: Rhodotorula toruloides and Yarrowia lipolytica. Quantitative proteomics shows a substantial proteome reallocation in response to nitrogen and phosphorous limitation, with ribosomal proteins strongly down regulated, while lipid biosynthetic enzymes are preserved but not consistently upregulated in absolute quantity. Thus, nutrient limitation, rather than triggering greatly enhanced lipid synthesis, results in roughly sustained lipid enzyme levels and biosynthetic flux. Due to slower lipid dilution by cell division, this suffices to drive marked lipid accumulation.

Keber, Felix [Lewis Sigler Institute for Integrati↗

A deep learning-guided automated workflow in LipidOz for detailed characterization of fungal fatty acid unsaturation by ozonolysis

Understanding fungal lipid biology and metabolism is critical for antifungal target discovery as lipids play central roles in cellular processes. Nuances in lipid structural differences can significantly impact their functions, making it necessary to characterize lipids in detail to enable and understanding of their roles in these complex systems. In particular, lipid double bond (DB) locations are an important component of lipid structure that can only be determined using a few specialized analytical techniques. Ozone-induced dissociation mass spectrometry (OzID-MS) is one such technique that uses ozone to break lipid DBs, producing pairs of characteristic fragments that allow the determination of DB positions. In this work we apply OzID-MS and LipidOz software to analyze the complex lipids of Saccharomyces cerevisiae yeast strains transfected with different fatty acid desaturases from Histoplasma capsulatum to determine the specific unsaturated lipids produce. The automated data analysis in LipidOz made the determination of DB positions from this large dataset more practical, but manual verification for all targets was still time-consuming. The DL model reduces manual involvement in data analysis, but since it was trained using mammalian lipid extracts, the prediction accuracy on yeast-derived data was reduced. We addressed both shortcomings by retraining the DL model to act as a pre-filter to prioritize targets for automated analysis, providing confident manually verified results but requiring less computational time and manual effort. Our workflow resulted in the determination of novel DB positions and enzymatic specificity.

mass spectrometry, deep learning, Lipidomics, doub↗

Tolerance of engineered Rhodosporidium toruloides to sorghum hydrolysates during batch and fed-batch lipid production

Abstract Background Oleaginous yeasts are a promising candidate for the sustainable conversion of lignocellulosic feedstocks into fuels and chemicals, but their growth on these substrates can be inhibited as a result of upstream pretreatment and enzymatic hydrolysis conditions. Previous studies indicate a high citrate buffer concentration during hydrolysis inhibits downstream cell growth and ethanol fermentation in Saccharomyces cerevisiae . In this study, an engineered Rhodosporidium toruloides strain with enhanced lipid accumulation was grown on sorghum hydrolysate with high and low citrate buffer concentrations. Results Both hydrolysis conditions resulted in similar sugar recovery rates and concentrations. No significant differences in cell growth, sugar utilization rates, or lipid production rates were observed between the two citrate buffer conditions during batch fermentation of R. toruloides . Under fed-batch growth on low-citrate hydrolysate a lipid titer of 16.7 g/L was obtained. Conclusions Citrate buffer was not found to inhibit growth or lipid production in this engineered R. toruloides strain, nor did reducing the citrate buffer concentration negatively affect sugar yields in the hydrolysate. As this process is scaled-up, $131 per ton of hydrothermally pretreated biomass can be saved by use of the lower citrate buffer concentration during enzymatic hydrolysis. Graphical Abstract

09 BIOMASS FUELS↗

Leveraging 13C-Labeling to Assign Molecular Formulas to Unknown Yeast Metabolites

Mass spectrometry analyses have identified tens of thousands of unknown small molecule-associated peaks in different biological specimens. Notably, even the simplest and best studied organisms like Escherichia coli and Saccharomyces cerevisiae yield thousands of unknown peaks. A key question is how many of these reflect actual novel endogenous metabolites. To explore this, Mahieu and Patti used complete 13 C -labeling in E. coli to credential peaks as biological. This reduced the number of unknowns by more than 90%. Here, we carry out similar uniform 13 C-labeling in the Baker’s yeast S. cerevisiae and two less-studied bioenergy-relevant yeasts Rhodotorula toruloides (lipid producer) and Issatchenkia orientalis (organic acid producer). Identification of unknown metabolite peaks and their molecular formulas is facilitated through software tailored for 13 C labeling data and resulting knowledge of carbon atom count. A classification model evaluates the plausibility of each candidate formula, with peaks lacking plausible candidate formulas unlikely to reflect metabolite molecular ions. This approach prioritizes about one hundred candidate abundant unknown metabolites with logical molecular formulas. Most of these are species-specific rather than conserved across yeasts, and more are found in the nonmodel yeasts than S. cerevisiae. Thus, 13 C-labeling data on unknown metabolites highlights the potential for discovering new metabolites and pathways in nonmodel yeasts.

Carbon↗

Genome-scale model development and genomic sequencing of the oleaginous clade Lipomyces

The Lipomyces clade contains oleaginous yeast species with advantageous metabolic features for biochemical and biofuel production. Limited knowledge about the metabolic networks of the species and limited tools for genetic engineering have led to a relatively small amount of research on the microbes. Here, a genome-scale metabolic model (GSM) of Lipomyces starkeyi NRRL Y-11557 was built using orthologous protein mappings to model yeast species. Phenotypic growth assays were used to validate the GSM (66% accuracy) and indicated that NRRL Y-11557 utilized diverse carbohydrates but had more limited catabolism of organic acids. The final GSM contained 2,193 reactions, 1,909 metabolites, and 996 genes and was thus named iLst996. The model contained 96 of the annotated carbohydrate-active enzymes. iLst996 predicted a flux distribution in line with oleaginous yeast measurements and was utilized to predict theoretical lipid yields. Twenty-five other yeasts in the Lipomyces clade were then genome sequenced and annotated. Sixteen of the Lipomyces species had orthologs for more than 97% of the iLst996 genes, demonstrating the usefulness of iLst996 as a broad GSM for Lipomyces metabolism. Pathways that diverged from iLst996 mainly revolved around alternate carbon metabolism, with ortholog groups excluding NRRL Y-11557 annotated to be involved in transport, glycerolipid, and starch metabolism, among others. Overall, this study provides a useful modeling tool and data for analyzing and understanding Lipomyces species metabolism and will assist further engineering efforts in Lipomyces .

59 BASIC BIOLOGICAL SCIENCES↗

Nitrogen starvation causes lipid remodeling in Rhodotorula toruloides

Abstract Background The oleaginous yeast Rhodotorula toruloides is a promising chassis organism for the biomanufacturing of value-added bioproducts. It can accumulate lipids at a high fraction of biomass. However, metabolic engineering efforts in this organism have progressed at a slower pace than those in more extensively studied yeasts. Few studies have investigated the lipid accumulation phenotype exhibited by R. toruloides under nitrogen limitation conditions. Consequently, there have been only a few studies exploiting the lipid metabolism for higher product titers. Results We performed a multi-omic investigation of the lipid accumulation phenotype under nitrogen limitation. Specifically, we performed comparative transcriptomic and lipidomic analysis of the oleaginous yeast under nitrogen-sufficient and nitrogen deficient conditions. Clustering analysis of transcriptomic data was used to identify the growth phase where nitrogen-deficient cultures diverged from the baseline conditions. Independently, lipidomic data was used to identify that lipid fractions shifted from mostly phospholipids to mostly storage lipids under the nitrogen-deficient phenotype. Through an integrative lens of transcriptomic and lipidomic analysis, we discovered that R. toruloides undergoes lipid remodeling during nitrogen limitation, wherein the pool of phospholipids gets remodeled to mostly storage lipids. We identify specific mRNAs and pathways that are strongly correlated with an increase in lipid levels, thus identifying putative targets for engineering greater lipid accumulation in R. toruloides . One surprising pathway identified was related to inositol phosphate metabolism, suggesting further inquiry into its role in lipid accumulation. Conclusions Integrative analysis identified the specific biosynthetic pathways that are differentially regulated during lipid remodeling. This insight into the mechanisms of lipid accumulation can lead to the success of future metabolic engineering strategies for overproduction of oleochemicals.

59 BASIC BIOLOGICAL SCIENCES↗

Protoplast fusion as a strategy to increase ploidy in Rhodotorula toruloides for strain development

Rhodotorula toruloides is a red oleaginous yeast with growing commercial interest because of its hardiness and exceptional lipid production capacity. Because it is a basidiomycete yeast with a complex life cycle, many of the classical breeding methods used with ascomycetes are unavailable for strain improvement. However, we have been able to construct polyploid yeast by fusing protoplasts of parents with the same mating type. Fusing of Y-6985 (A2) and Y-48190 (A2), which had been transformed with complementary antibiotic markers, led to the recovery of two diploids and one triploid. The stability of the fusion yeasts was tested by plating them on non-selective medium after several growth cycles under antibiotics and then testing five colonies per strain for nuclear DNA contents using flow cytometry and standard cell cycle analysis: the triploid and one diploid were stable. Fusants inherited their mitochondria from a single parent, which was demonstrated using restriction fragment length polymorphism (RFLP) of mitochondrial DNA. The phenotypic properties of the parents and fusants were compared in glucose fed-batch bioreactor studies and cellulosic sugar batch cultures. The final lipid titers for the fed-batch cultures were 24.9–39.7 g/L with Y-6985 and the diploid and triploid performing the best and worst, respectively. The fusants demonstrated intermediate hardiness for growth on hydrolysate prepared with dilute-acid pretreated switchgrass and were outperformed by Y-48190. Unlike one of the haploid parents, the fusants grew in 70% v/v concentrated hydrolysate. Furthermore, they did not grow as fast as the other haploid. In this study, a modernized protoplast fusion method is resurrected a useful tool for strain development in this yeast, which is complementary with other available methods.

Lignocellulose↗

Data for Protoplast Fusion as a Strategy to Increase Ploidy in Rhodotorula toruloides for Strain Development

Rhodotorula toruloides is a red oleaginous yeast with growing commercial interest because of its hardiness and exceptional lipid production capacity. Because it is a basidiomycete yeast with a complex life cycle, many of the classical breeding methods used with ascomycetes are unavailable for strain improvement. However, we have been able to construct polyploid yeast by fusing protoplasts of parents with the same mating type. Fusing of Y-6985 (A2) and Y-48190 (A2), which had been transformed with complementary antibiotic markers, led to the recovery of two diploids and one triploid. The stability of the fusion yeasts was tested by plating them on non-selective medium after several growth cycles under antibiotics and then testing five colonies per strain for nuclear DNA contents using flow cytometry and standard cell cycle analysis: the triploid and one diploid were stable. Fusants inherited their mitochondria from a single parent, which was demonstrated using restriction fragment length polymorphism (RFLP) of mitochondrial DNA. The phenotypic properties of the parents and fusants were compared in glucose fed-batch bioreactor studies and cellulosic sugar batch cultures. The final lipid titers for the fed-batch cultures were 24.9–39.7 g/L with Y-6985 and the diploid and triploid performing the best and worst, respectively. The fusants demonstrated intermediate hardiness for growth on hydrolysate prepared with dilute-acid pretreated switchgrass and were outperformed by Y-48190. Unlike one of the haploid parents, the fusants grew in 70% v/v concentrated hydrolysate. However, they did not grow as fast as the other haploid. In this study, a modernized protoplast fusion method is resurrected a useful tool for strain development in this yeast, which is complementary with other available methods.

FOS: Biological sciences↗

Proteomic insights into the physiology and metabolism of oleaginous yeasts and filamentous fungi

Fungi are vital to the bioeconomy, serving as key producers of food, beverages, biofuels, and medicines, while also acting as essential resource recyclers in ecosystem management. For nearly a century, oleaginous yeast and filamentous fungi have been explored for their proficiency in oleochemicals production and carbon storage. Lipogenesis is one of the most well-studied fungal processes, with substantial progress having been made through reductionist biochemical approaches; however, the physiology and metabolism of fungal systems operating under different conditions arise from the functions of thousands of proteins, for which very little is known outside of model yeast. In this review, we discuss how proteomics provides a valuable analytical approach to contextualize lipogenesis within a complex biological system, where lipid accumulation is fundamentally governed by changes in proteins of multiple pathways. In the past two decades, proteomics has been applied to study stress response to nutrient limitations, metabolism of various carbon and nitrogen sources, the lipid droplet hub of carbon storage, protein post-translational modifications and signaling pathways, as well as oleochemical biosynthesis, thereby advancing our understanding of the oleaginous phenotype. Over 40 studies are reviewed herein to evaluate the impact, critically assess the utility, and propose future applications of proteomics. In the coming years, large systems-level proteomics studies will lay a foundation for marrying modeling and metabolic engineering strategies to optimize oleochemicals production in oleaginous fungi.

Lipid production↗

Selective designer hydrolysates from Miscanthus bioenergy crop for sustainable utilization

Designer enzymatic hydrolysates deliver targeted, optimized fermentable sugars while reducing the formation of inhibitory by-products. Herein, five distinct enzymatic hydrolysates (EH) were generated from Miscanthus biomass using alkaline-ethanol fractionation and hydrothermal-mechanical refining (HMR) pretreatment approaches. Noticeably, alkali-ethanol fractionated hemicellulose A (HMA) and hemicellulose B (HMB) hydrolysis resulted in xylose-rich enzymatic hydrolysates with 104.8 ± 5.6 g L −1 and 173.4 ± 4.6 g L −1 xylose, respectively. All five hydrolysates encompassing varied carbon to nitrogen ratios were evaluated for lipid production using an engineered oleaginous yeast, R. toruloides 880-ADS. Microbial fermentation of xylose-rich hydrolysates, viz. HMR-EH2, HMA-EH, and HMB-EH, resulted in lipid yields ranging from 0.05 to 0.12 g g −1 sugar. Compositional and 2D NMR analyses revealed that HMA-EH residues are highly lignin-enriched while preserving the non-condensed structure conducive to valorization. Overall, the findings highlighted a novel, selective trade-off approach for maximizing lipid titers from designer hydrolysates, corroborating complete resource recovery for establishing integrated biorefineries.

Singh, Shuchi [University of Illinois at Urbana-Ch↗

Data for Engineering and Evolution of Yarrowia lipolytica for Producing Lipids from Lignocellulosic Hydrolysates

Yarrowia lipolytica , an oleaginous yeast, shows promise for industrial fermentation due to its robust acetyl-CoA flux and well-developed genetic engineering tools. However, its lack of an active xylose metabolism restricts the conversion of cellulosic sugars to valuable products. To address this, metabolic engineering, and adaptive laboratory evolution (ALE) were applied to the Y. lipolytica PO1f strain, resulting in an efficient xylose-assimilating strain (XEV). Whole-genome sequencing (WGS) of the XEV followed by reverse engineering revealed that the amplification of the heterologous oxidoreductase pathway and a mutation in the GTPase-activating protein gene (YALI0B12100g) might be the primary reasons for improved xylose assimilation in the XEV strain. When a sorghum hydrolysate was used, the XEV strain showed superior xylose consumption and lipid production compared to its parental strain (X123). This study advances our understanding of xylose metabolism in Y. lipolytica and proposes effective metabolic engineering strategies for optimizing lignocellulosic hydrolysates.

Hydrolysate↗

Electron microscopy evidence of gadolinium toxicity being mediated through cytoplasmic membrane dysregulation

Past functional toxicogenomic studies have indicated that genes relevant to membrane lipid synthesis are important for tolerance to the lanthanides. Moreover, previously reported imaging of patient's brains following administration of gadolinium-based contrast agents shows gadolinium lining the vessels of the brain. Taken together, these findings suggest the disruption of cytoplasmic membrane integrity as a mechanism by which lanthanides induce cytotoxicity. In the presented work we used scanning transmission electron microscopy and spatially resolved elemental spectroscopy to image the morphology and composition of gadolinium, europium, and samarium precipitates that formed on the outside of yeast cell membranes. In no sample did we find that the lanthanide contaminant had crossed the cell membrane, even in experiments using yeast mutants with disrupted genes for sphingolipid synthesis—the primary lipids found in yeast cytoplasmic membranes. Rather, we have evidence that lanthanides are co-located with phosphorus outside the yeast cells. Finally, these results lead us to hypothesize that the lanthanides scavenge or otherwise form complexes with phosphorus from the sphingophospholipid head groups in the cellular membrane, thereby compromising the structure or function of the membrane, and gaining the ability to disrupt membrane function without entering the cell.

59 BASIC BIOLOGICAL SCIENCES↗