Search NASA⌕ Search

SEARCH · Search NASA

Results for “zone pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Investigation of the aerothermodynamics of hypervelocity reacting flows in the ram accelerator

New diagnostic techniques for measuring the high pressure flow fields associated with high velocity ram accelerator propulsive modes was experimentally investigated. Individual propulsive modes are distinguished by their operating Mach number range and the manner in which the combustion process is initiated and stabilized. Operation of the thermally choked ram accelerator mode begins by injecting the projectile into the accelerator tube at a prescribed entrance velocity by means of a conventional light gas gun. A specially designed obturator, which is used to seal the bore of the gun, plays a key role in the ignition of the propellant gases in the subsonic combustion mode of the ram accelerator. Once ignited, the combustion process travels with the projectile and releases enough heat to thermally choke the flow within several tube diameters behind it, thereby stabilizing a high pressure zone on the rear of the projectile. When the accelerating projectile approaches the Chapman-Jouguet detonation speed of the propellant mixture, the combustion region is observed to move up onto the afterbody of the projectile as the pressure field evolves to a distinctively different form that implies the presence of supersonic combustion processes. Eventually, a high enough Mach number is reached that the ram effect is sufficient to cause the combustion process to occur entirely on the body. Propulsive cycles utilizing on-body heat release can be established either by continuously accelerating the projectile in a single propellant mixture from low initial in-tube Mach numbers (M less than 4) or by injecting the projectile at a speed above the propellant's Chapman-Jouguet detonation speed. The results of experimental and theoretical explorations of ram accelerator gas dynamic phenomena and the effectiveness of the new diagnostic techniques are presented in this report.

Hertzberg, A.↗

Structural relations of charnockites of South India

The structural features of the Peninsular gneisses were discussed and compared with those in the charnockitic rocks. On this basis, three types of charnockite occurrences can be recognized: those involved in isoclinal folds that were later boudinaged and refolded, those affected by migmatization synkinematic with early isoclinal folding, and incipient charnockites formed in low-pressure zones of fold-hinges and boudin-necks (e.g., Kabbaldurga). It was concluded that at least two, if not three, stages of charnockite formation are required by these structural data.

Naha, K.↗

Model chromospheres of RS CVn stars - Balmer line profiles in Gamma Andromedae

Two models have been constructed for the chromosphere of the RS CVn star Gamma And, one with a low-pressure transition zone, and one with a high pressure transition zone. The high pressure model predicts an H alpha line profile which agrees fairly well with high resolution observations of Gamma And, without the need to include nonthermal line broadening. The low pressure model predicts an H alpha profile which agrees very well with the observations, after application of macroturbulent broadening with a gaussian velocity parameter of about 30 km/sec. Methods which could distinguish between the two alternatives are discussed, and it is suggested that if the low-pressure model is valid, the large macroturbulence may be associated with unstable magnetic flux loops in the atmosphere.

Mullan, D. J.↗

Black hole accretion disks with coronae

Observations suggest the existence of both hot and cold dark matter in the centers of active galactic nuclei. Recent spectral models require a major fraction of power to be dissipated in the hot matter. We study the case when the hot matter forms a corona around a standard cold alpha-disk. In particular, we investigate the case when a major fraction, f, of the power released when the cold matter accretes is transported to and dissipated in the corona. This has major effects on the cold disk, making it colder, more geometrically thin, denser, and having larger optical depths. One important consequence is the disappearance of the effectively optically thin zone as well as of the radiation pressure dominated zone for values of f sufficiently closed to unity. The disappearance of the radiation pressure dominated zone will result in a cold disk with only a gas pressure dominated zone that is stable against thermal and viscous instabilities. We also show that the pressure ( and the radiation) from the corona will only affect the surface layers of the cold disk. Our results disagree with those of other recent work on accretion disks with coronae. We find those works to be based on unphysical assumptions.

Svensson, Roland↗

The energy balance and pressure in the solar transition zone for network and active region features

The electron pressure and energy balance in the solar transition zone are determined for about 125 network and active region features on the basis of high spectral and spatial resolution extreme ultraviolet spectra. Si III line intensity ratios obtained from the Naval Research Laboratory high-resolution telescope and spectrograph during a rocket flight are used as diagnostics of electron density and pressure for solar features near 3.5 x 10 to the 4th K. Observed ratios are compared with the calculated dependence of the 1301 A/1312 A and 1301 A/1296 A line intensity ratios on electron density, temperature and pressure. Electron densities ranging from 2 x 10 to the 10th/cu cm to 10 to the 12th/cu cm and active region pressures from 3 x 10 to the 15th to 10 to the 16th/cu cm K are obtained. Energy balance calculations reveal the balance of the divergence of the conductive flux and turbulent energy dissipation by radiative energy losses in a plane-parallel homogeneous transition zone (fill factor of 1), and an energy source requirement for a cylindrical zone geometry (fill factor less than 0.04).

Nicolas, K. R.↗

Segregation behavior in a stationary vertical zone with converging interfaces - Pressure-induced segregation effects

Crystal growth and segregation were investigated in a confined vertical melt zone in which the upper solid-melt interface advanced under destabilizing and the lower interface under stabilizing thermal gradients. A technique reported by Kim et al. (1972) was used in the study. The experimental results are discussed, giving attention to interface morphology and growth rate and questions of dopant segregation. Dopant inhomogeneities formed simultaneously in both advancing interfaces can be explained on the basis of pressure induced segregation effects.

Kim, K. M.↗

Failure analysis of solid rocket apogee motors

The analysis followed five selected motors through initial design, development, test, qualification, manufacture, and final flight reports. An audit was conducted at the manufacturing plants to complement the literature search with firsthand observations of the current philosophies and practices that affect reliability of the motors. A second literature search emphasized acquisition of spacecraft and satellite data bearing on solid motor reliability. It was concluded that present practices at the plants yield highly reliable flight hardware. Reliability can be further improved by new developments of aft-end bonding and initiator/igniter nondestructive test methods, a safe/arm device, and an insulation formulation. Minimum diagnostic instrumentation is recommended for all motor flights. Surplus motors should be used in margin testing. Criteria should be established for pressure and zone curing. The motor contractor should be represented at launch. New design analyses should be made of stretched motors and spacecraft/motor pairs.

Martin, P. J.↗

Supersonic propeller noise in a uniform flow

The reported investigation is concerned with an extension of a theory presented by Hawkings and Lowson (1974). The extension considers also forward flight. Attention is given to the retarded potential solution of the convected wave equation, the Fourier components of acoustic pressure, the zones of relative silence and Doppler amplification, and the asymptotic evaluation of a noise field for a large wave number. The discussed analysis provides the Fourier coefficients of the acoustic signature of a supersonic rotor in a uniform flow. The results are represented by an integral over the blade planform which must be evaluated numerically. The fast Fourier transform can be employed for the Fourier inversion.

Jou, W.-H.↗

Steady, periodic, and aperiodic atmospheric flows

Atmospheric weather patterns usually occur on scales of a 1000 km or 5000 km and greater, and quasisteady situations can be caused by the appearance of high pressure, blocking zones. Attention is given to the wave-wave interactions and their effects on atmospheric flows on the large scale. The discussion is performed with the beta-plane model for a spherical geometry and a large number of degrees of freedom. The barotropic potential vorticity equation is defined, and discretization of the topography of the sphere results in a spectral truncation with 25 components. The solutions are generated as a function of a forcing and a dissipative parameter. The model yields steady, periodic, and aperiodic solutions, which are shown to be analogous to zonal and blocked atmospheric flows.

Legras, B.↗

Opening of an interface flaw in a layered elastic half-plane under compressive loading

A static analysis is given of the problem of an elastic layer perfectly bonded, except for a frictionless interface crack, to a dissimilar elastic half-plane. The free surface of the layer is loaded by a finite pressure distribution directly over the crack. The problem is formulated using the two dimensional linear elasticity equations. Using Fourier transforms, the governing equations are converted to a pair of coupled singular integral equations. The integral equations are reduced to a set of simultaneous algebraic equations by expanding the unknown functions in a series of Jacobi polynomials and then evaluating the singular Cauchy-type integrals. The resulting equations are found to be ill-conditioned and, consequently, are solved in the least-squares sense. Results from the analysis show that, under a normal pressure distribution on the free surface of the layer and depending on the combination of geometric and material parameters, the ends of the crack can open. The resulting stresses at the crack-tips are singular, implying that crack growth is possible. The extent of the opening and the crack-top stress intensity factors depend on the width of the pressure distribution zone, the layer thickness, and the relative material properties of the layer and half-plane.

Kennedy, J. M.↗

Jet production in super-Eddington accretion disks

A two-dimensional, radiation-coupled, Newtonian hydrodynamic simulation is reported for a super-Eddington, mass accretion rate, M = 4 M(E) disk accretion flow onto a 3-solar mass pseudoblack hole. Near the disk midplane, convection cells effectively block the accretion flow, even though viscous heating maximizes there. Accretion predominantly occurs in a supersonic inflow which follows streamlines of approximately constant angular momentum. The optically thick inflow traps radiation so that 80 percent of the luminosity is absorbed by the black hole; the emergent power is sub-Eddington. An axial jet self consistently forms just outside a conical photosphere which bounds the accretion zone; radiation pressure accelerates the jet to about 10 to the 10th cm/s. The jet's mass efflux is only 0.4 percent of the total mass accretion rate.

Eggum, G. E.↗

Climatology 2011: An MLS and Sonde Derived Ozone Climatology for Satellite Retrieval Algorithms

The ozone climatology used as the a priori for the version 8 Solar Backscatter Ultraviolet (SBUV) retrieval algorithms has been updated. The Microwave Limb Sounder (MLS) instrument on Aura has excellent latitude coverage and measures ozone daily from the upper troposphere to the lower mesosphere. The new climatology consists of monthly average ozone profiles for ten degree latitude zones covering pressure altitudes from 0 to 65 km. The climatology was formed by combining data from Aura MLS (2004-2010) with data from balloon sondes (1988-2010). Ozone below 8 km (below 12 km at high latitudes) is based on balloons sondes, while ozone above 16 km (21 km at high latitudes) is based on MLS measurements. Sonde and MLS data are blended in the transition region. Ozone accuracy in the upper troposphere is greatly improved because of the near uniform coverage by Aura MLS, while the addition of a large number of balloon sonde measurements improves the accuracy in the lower troposphere, in the tropics and southern hemisphere in particular. The addition of MLS data also improves the accuracy of climatology in the upper stratosphere and lower mesosphere. The revised climatology has been used for the latest reprocessing of SBUV and TOMS satellite ozone data.

McPeters, Richard D.↗

High-speed motion picture camera experiments of cavitation in dynamically loaded journal bearings

A high-speed camera was used to investigate cavitation in dynamically loaded journal bearings. The length-diameter ratio of the bearing, the speeds of the shaft and bearing, the surface material of the shaft, and the static and dynamic eccentricity of the bearing were varied. The results reveal not only the appearance of gas cavitation, but also the development of previously unsuspected vapor cavitation. It was found that gas cavitation increases with time until, after many hundreds of pressure cycles, there is a constant amount of gas kept in the cavitation zone of the bearing. The gas can have pressures of many times the atmospheric pressure. Vapor cavitation bubbles, on the other hand, collapse at pressures lower than the atmospheric pressure and cannot be transported through a high-pressure zone, nor does the amount of vapor cavitation in a bearing increase with time. Analysis is given to support the experimental findings for both gas and vapor cavitation.

Jacobson, B. O.↗

High-speed motion picture camera experiments of cavitation in dynamically loaded journal bearings

A high-speed camera was used to investigate cavitation in dynamically loaded journal bearings. The length-diameter ratio of the bearing, the speeds of the shaft and bearing, the surface material of the shaft, and the static and dynamic eccentricity of the bearing were varied. The results reveal not only the appearance of gas cavitation, but also the development of previously unsuspected vapor cavitation. It was found that gas cavitation increases with time until, after many hundreds of pressure cycles, there is a constant amount of gas kept in the cavitation zone of the bearing. The gas can have pressures of many times the atmospheric pressure. Vapor cavitation bubbles, on the other hand, collapse at pressures lower than the atmospheric pressure and cannot be transported through a high-pressure zone, nor does the amount of vapor cavitation in a bearing increase with time. Analysis is given to support the experimental findings for both gas and vapor cavitation. Previously announced in STAR as N82-20543

Hamrock, B. J.↗

A finite element computational method for high Reynolds number laminar flows

A velocity-pressure integrated, mixed interpolation, Galerkin finite element method for the Navier-Stokes equations is presented. In the method, the velocity variables are interpolated using complete quadratic shape functions, and the pressure is interpolated using linear shape functions which are defined on a triangular element for the two-dimensional case and on a tetrahedral element for the three-dimensional case. The triangular element and the tetrahedral element are contained inside the complete bi- and tri-quadratic elements for velocity variables for two and three dimensional cases, respectively, so that the pressure is discontinuous across the element boundaries. Example problems considered include: a cavity flow of Reynolds numbers 400 through 10,000; a laminar backward facing step flow; and a laminar flow in a square duct of strong curvature. The computational results compared favorably with the finite difference computational results and/or experimental data available. It was found that the present method can capture the delicate pressure driven recirculation zones, that the method did not yield any spurious pressure modes, and that the method requires fewer grid points than the finite difference methods to obtain comparable computational results.

Kim, Sang-Wook↗

The Gaseous Explosive Reaction : the Effect of Pressure on the Rate of Propagation of the Reaction Zone and upon the Rate of Molecular Transformation

This study of gaseous explosive reaction has brought out a number of important fundamental characteristics of the explosive reaction indicating that the basal processes of the transformation are much simpler and corresponds more closely to the general laws and principles of ordinary transformations than is usually supposed. The report calls attention to the point that the rate of molecular transformation within the zone was found in all cases to be proportional to pressure, that the transformation within the zone is the result of binary impacts. This result is of unusual interest in the case of the reaction of heavy hydrocarbon fuels and the reaction mechanism proposed by the recent kinetic theory of chain reactions.

Stevens, F W↗