Engineering topics

Agogino, Alice M.

Publications and source records attributed to Agogino, Alice M..

7 records

NASA NTRS2015

System Design and Locomotion of Superball, an Untethered Tensegrity Robot

The Spherical Underactuated Planetary Exploration Robot ball (SUPERball) is an ongoing project within NASA Ames Research Center's Intelligent Robotics Group and the Dynamic Tensegrity Robotics Lab (DTRL). The current SUPERball is the first full prototype of this tensegrity robot platform, eventually destined for space exploration missions. This work, building on prior published discussions of individual components, presents the fully-constructed robot. Various design improvements are discussed, as well as testing results of the sensors and actuators that illustrate system performance. Basic low-level motor position controls are implemented and validated against sensor data, which show SUPERball to be uniquely suited for highly dynamic state trajectory tracking. Finally, SUPERball is shown in a simple example of locomotion. This implementation of a basic motion primitive shows SUPERball in untethered control.

Tensegrity↗

NASA NTRS2014

Hardware Design and Testing of SUPERball, A Modular Tensegrity Robot

We are developing a system of modular, autonomous "tensegrity end-caps" to enable the rapid exploration of untethered tensegrity robot morphologies and functions. By adopting a self-contained modular approach, different end-caps with various capabilities (such as peak torques, or motor speeds), can be easily combined into new tensegrity robots composed of rods, cables, and actuators of different scale (such as in length, mass, peak loads, etc). As a first step in developing this concept, we are in the process of designing and testing the end-caps for SUPERball (Spherical Underactuated Planetary Exploration Robot), a project at the Dynamic Tensegrity Robotics Lab (DTRL) within NASA Ames's Intelligent Robotics Group. This work discusses the evolving design concepts and test results that have gone into the structural, mechanical, and sensing aspects of SUPERball. This representative tensegrity end-cap design supports robust and repeatable untethered mobility tests of the SUPERball, while providing high force, high displacement actuation, with a low-friction, compliant cabling system.

Tensegrity↗

NASA NTRS2014

SUPERball: Exploring Tensegrities for Planetary Probes

The Dynamic Tensegrity Robotics Lab (DTRL) at NASA Ames Research Center is developing a compliant and distributed tensegrity robotic platform for planetary exploration. Working in collaboration with Ghent University, the DTRL built an untethered prototype robot, the SUPERball. In this work, multiple issues with the current SUPERball design are addressed, when considering an example mission to Titan. Specifically, engineering requirements for the mission are empirically validated, and the current design is extended under these requirements to meet expanded goals.Survival of impact forces under entry, descent, and landing are verified with a physical experiment performed in collaboration with the University of Idaho. Then, concepts for a fully-actuated redesign of SUPERball are generated, compared, and validated against current engineering requirements. This exploratory work moves the SUPERball project toward an eventual flight-ready design.\

Tensegrity↗

NASA NTRS2006

Event Detection in Aerospace Systems using Centralized Sensor Networks: A Comparative Study of Several Methodologies

Recent advances in micro electromechanical systems technology, digital electronics, and wireless communications have enabled development of low-cost, low-power, multifunctional miniature smart sensors. These sensors can be deployed throughout a region in an aerospace vehicle to build a network for measurement, detection and surveillance applications. Event detection using such centralized sensor networks is often regarded as one of the most promising health management technologies in aerospace applications where timely detection of local anomalies has a great impact on the safety of the mission. In this paper, we propose to conduct a qualitative comparison of several local event detection algorithms for centralized redundant sensor networks. The algorithms are compared with respect to their ability to locate and evaluate an event in the presence of noise and sensor failures for various node geometries and densities.

Mehr, Ali Farhang↗

NASA NTRS1990

Research on conceptual/innovative design for the life cycle

The goal of this research is developing and integrating qualitative and quantitative methods for life cycle design. The definition of the problem includes formal computer-based methods limited to final detailing stages of design; CAD data bases do not capture design intent or design history; and life cycle issues were ignored during early stages of design. Viewgraphs outline research in conceptual design; the SYMON (SYmbolic MONotonicity analyzer) algorithm; multistart vector quantization optimization algorithm; intelligent manufacturing: IDES - Influence Diagram Architecture; and 1st PRINCE (FIRST PRINciple Computational Evaluator).

Cagan, Jonathan↗

NASA NTRS1990

AI/OR computational model for integrating qualitative and quantitative design methods

A theoretical framework for integrating qualitative and numerical computational methods for optimally-directed design is described. The theory is presented as a computational model and features of implementations are summarized where appropriate. To demonstrate the versatility of the methodology we focus on four seemingly disparate aspects of the design process and their interaction: (1) conceptual design, (2) qualitative optimal design, (3) design innovation, and (4) numerical global optimization.

Agogino, Alice M.↗

NASA NTRS1990

Inducing optimally directed non-routine designs

Non-routine designs are characterized by the creation of new variables and thus an expansion of the design space. These differ from routine designs in that the latter are restricted to a fixed set of variables and thus a pre-defined design space. In previous papers, the 1stPRINCE non-routine design methodology that expands the design space in such a way that optimal trends dictate the direction and form of this expansion is described. How inductive techniques can determine these optimal trends are examined. The induction techniques in 1stPRINCE utilize constraint information from monotonicity analysis to determine how to mutate the design space. The process observes the constraint information of mutated designs and induces trends from those constraints. Application of 1stPRINCE to a beam under flexural load leads to an optimally directed tapered beam. An interesting application of 1stPRINCE to determine the optimally directed shape of a spinning square block such that resistance to spinning is minimized leads to the discovery of a circular wheel.

Cagan, Jonathan↗