Hardware Design and Testing of SUPERball, A Modular Tensegrity Robot

Sabelhaus, Andrew P.; Bruce, Jonathan; Caluwaerts, Ken; Chen, Yangxin; Lu, Dizhou; Liu, Yuejia; Agogino, Adrian K.; SunSpiral, Vytas; Agogino, Alice M.

NASA NTRS · 20140011157

Hardware Design and Testing of SUPERball, A Modular Tensegrity Robot

Sabelhaus, Andrew P.·Bruce, Jonathan·Caluwaerts, Ken·Chen, Yangxin·Lu, Dizhou·Liu, Yuejia·Agogino, Adrian K.·SunSpiral, Vytas·Agogino, Alice M.

View original source ↗Export metadata ↓

Abstract

We are developing a system of modular, autonomous "tensegrity end-caps" to enable the rapid exploration of untethered tensegrity robot morphologies and functions. By adopting a self-contained modular approach, different end-caps with various capabilities (such as peak torques, or motor speeds), can be easily combined into new tensegrity robots composed of rods, cables, and actuators of different scale (such as in length, mass, peak loads, etc). As a first step in developing this concept, we are in the process of designing and testing the end-caps for SUPERball (Spherical Underactuated Planetary Exploration Robot), a project at the Dynamic Tensegrity Robotics Lab (DTRL) within NASA Ames's Intelligent Robotics Group. This work discusses the evolving design concepts and test results that have gone into the structural, mechanical, and sensing aspects of SUPERball. This representative tensegrity end-cap design supports robust and repeatable untethered mobility tests of the SUPERball, while providing high force, high displacement actuation, with a low-friction, compliant cabling system.

Explore related subjects

Tensegrity Modular Robotics

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Sabelhaus, Andrew P., Bruce, Jonathan, Caluwaerts, Ken, Chen, Yangxin, Lu, Dizhou, Liu, Yuejia, Agogino, Adrian K., SunSpiral, Vytas, Agogino, Alice M.. 2014-07-15. Hardware Design and Testing of SUPERball, A Modular Tensegrity Robot. https://ntrs.nasa.gov/citations/20140011157

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

NASA NTRS2022

Design, Control, and Simulation of Tensegrity Based Kites

Due to lowering price and increased functionality, the future could bring in a huge number of UAVs flying in urban areas. In order to safely accommodate them, they should be fundamentally safe to fly. Unfortunately, current rigid designs could cause significant damage in case of a crash. To mitigate this problem, this report proposes constructing soft UAVs using tensegrity structures in order to mitigate the impact of collisions, effectively improving the safety of the vehicles and increasing public confidence in the use of UAVs. In this paradigm, the frame of the vehicle is designed using a tensegrity structure, a geometric structure composed of suspended elements of pure compression and pure tension, which during a collision can better absorb high stresses through elastic deformation. As a feasibility study we test this concept on an actuated tensegrity kite in a custom physics simulator, designed to simulate tensegrity structures with non-rigid rods, along with basic simulations of lift. Results show that this concept is feasible and that the kite can change orientation by actively changing the shape of the tensegrity structure.

Tensegrity↗

NASA NTRS2021

Scalability and Design of Six Rod Tensegrity Soft Robotic Structure

Robots based on tensegrity structures (interconnected rods and cables) offer many advantages such as low weight, small volume when packed, and have high impact resistance. Unfortunately tensegrity robots can be difficult to make and scale due a fundamental design trade-off: they need to have enough tension in the structure to maintain its integrity, while not having so much tension that it is difficult to actuate,change shape and move. This paper addresses this issue with three approaches:1) Traction based pulley actuation that is less sensitive to the tensioning of the structure, 2) A mix of elastic and inelastic cables allowing for a better balance between tensioning and actuation and 3) Using flexible rods allowing for actuation with inelastic cables. We test configurations and show that these approaches can indeed increase the scalability and usefulness of tensegrity robots.

Tensegrity↗

NASA NTRS2015

Super Ball Bot - Structures for Planetary Landing and Exploration, NIAC Phase 2 Final Report

Small, light-weight and low-cost missions will become increasingly important to NASA's exploration goals. Ideally teams of small, collapsible, light weight robots, will be conveniently packed during launch and would reliably separate and unpack at their destination. Such robots will allow rapid, reliable in-situ exploration of hazardous destination such as Titan, where imprecise terrain knowledge and unstable precipitation cycles make single-robot exploration problematic. Unfortunately landing lightweight conventional robots is difficult with current technology. Current robot designs are delicate, requiring a complex combination of devices such as parachutes, retrorockets and impact balloons to minimize impact forces and to place a robot in a proper orientation. Instead we are developing a radically different robot based on a "tensegrity" structure and built purely with tensile and compression elements. Such robots can be both a landing and a mobility platform allowing for dramatically simpler mission profile and reduced costs. These multi-purpose robots can be light-weight, compactly stored and deployed, absorb strong impacts, are redundant against single-point failures, can recover from different landing orientations and can provide surface mobility. These properties allow for unique mission profiles that can be carried out with low cost and high reliability and which minimizes the inefficient dependance on "use once and discard" mass associated with traditional landing systems. We believe tensegrity robot technology can play a critical role in future planetary exploration.

Tensegrity↗