Search NASA⌕ Search

Engineering topics

Antonov, Stoichko

Publications and source records attributed to Antonov, Stoichko.

20 records · Page 2

Nucleation and growth of α phase in a metastable β-Titanium Ti-5Al-5Mo-5V-3Cr alloy: Influence from the nano-scale, ordered-orthorhombic O" phase and α compositional evolution

We investigated the nucleation and growth of α precipitates in the presence of nano-scale, titanium-rich, ordered-orthorhombic O" precipitates formed during heating at 5 °C/min to 400 °C in a metastable β-Ti alloy, Ti-5Al-5Mo-5V-3Cr. The O" precipitates are found to assist α nucleation by serving as preferential nucleation sites. In the very initial stages of its precipitation, the α phase is found to have formed via a coupled diffusional-displacive mode as titanium-rich plates. At this stage, aluminum partitions equally between the β matrix and the growing α precipitates, but slowly diffuses up-hill into the α phase during isothermal aging at 400 °C for 15 h. The interplay between such pre-formed metastable phases and α can be exploited to tailor the microstructure, by refining the α distribution, and consequently improve the mechanical properties of β-Ti alloys. Finally, our work paves the way for exploiting this cascade of metastable phases for further microstructural engineering of β-Ti alloys.

36 MATERIALS SCIENCE↗

Surface Integrity and Oxidation of a Powder Metallurgy Ni-Based Superalloy Treated by Laser Shock Peening

Laser shock peening is a mechanical surface treatment which can induce large compressive residual stresses and microstructural changes in the material by using repetitive shocks from laser pulses. In this work, the surface integrity (surface microstructure, topography, hardness and residual stress) of a laser shock peening treated powder metallurgy Ni-based superalloy was investigated. Laser shock peening treatment introduces large plastic deformation especially at a depth of about 100 μm from the surface, which increases the local hardness. The residual stress from the surface to the interior of the sample was investigated by synchrotron X-ray diffraction. The maximum compressive stress reaches 400 MPa at the surface, while the depth of the compressive stress is about 0.7 mm. Lastly, the oxidation behavior of the treated and untreated samples was evaluated by thermal exposure at 700°C for 312 h. The LSP treatment decreased the thickness of oxide layer, thereby showing improved oxidation resistance.

36 MATERIALS SCIENCE↗