Search NASA⌕ Search

Engineering topics

Appel, Aaron M.

Publications and source records attributed to Appel, Aaron M..

14 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Oxidation of Ammonia Catalyzed by a Molecular Iron Complex: Translating Chemical Catalysis to Mediated Electrocatalysis

Abstract Ammonia is a promising candidate in the quest for sustainable, clean energy. With its capacity to serve as an energy carrier, the oxidation of ammonia opens avenues for carbon‐neutral approaches to address worldwide growing energy needs. We report the catalytic chemical oxidation of ammonia by an Earth‐abundant transition metal complex, trans ‐ [LFe II (MeCN) 2 ][PF 6 ] 2 , where L is a macrocyclic ligand bearing four N ‐heterocyclic carbene (NHC) donors. Using triarylaminium radical cations in MeCN, up to 182 turnovers of N 2 per Fe were obtained from chemical catalysis with an extremely low loading of the Fe catalyst (0.043 mM, 0.004 mol % catalyst). This chemical catalysis was successfully transitioned to mediated electrocatalysis for the oxidation of ammonia. Molecular electrocatalysis by the Fe catalyst and the mediator ( p ‐MeOC 6 H 4 ) 3 N exhibited a catalytic half‐wave potential ( E cat/2 ) of 0.18 V vs [Cp 2 Fe] +/0 in MeCN, and achieved 9.3 turnovers of N 2 at an applied potential of 0.20 V vs [Cp 2 Fe] +/0 at −20 °C in controlled‐potential electrolysis, with a Faradaic efficiency of 75 %. Based on computational results, the catalyst undergoes sequential oxidation and deprotonation steps to form [LFe IV (NH 2 ) 2 ] 2+ , and thereafter bimetallic coupling to form an N−N bond.

Liu, Liang↗
DOE OSTI2024

Oxidation of Ammonia Catalyzed by a Molecular Iron Complex: Translating Chemical Catalysis to Mediated Electrocatalysis

Abstract Ammonia is a promising candidate in the quest for sustainable, clean energy. With its capacity to serve as an energy carrier, the oxidation of ammonia opens avenues for carbon‐neutral approaches to address worldwide growing energy needs. We report the catalytic chemical oxidation of ammonia by an Earth‐abundant transition metal complex, trans ‐ [LFe II (MeCN) 2 ][PF 6 ] 2 , where L is a macrocyclic ligand bearing four N ‐heterocyclic carbene (NHC) donors. Using triarylaminium radical cations in MeCN, up to 182 turnovers of N 2 per Fe were obtained from chemical catalysis with an extremely low loading of the Fe catalyst (0.043 mM, 0.004 mol % catalyst). This chemical catalysis was successfully transitioned to mediated electrocatalysis for the oxidation of ammonia. Molecular electrocatalysis by the Fe catalyst and the mediator ( p ‐MeOC 6 H 4 ) 3 N exhibited a catalytic half‐wave potential ( E cat/2 ) of 0.18 V vs [Cp 2 Fe] +/0 in MeCN, and achieved 9.3 turnovers of N 2 at an applied potential of 0.20 V vs [Cp 2 Fe] +/0 at −20 °C in controlled‐potential electrolysis, with a Faradaic efficiency of 75 %. Based on computational results, the catalyst undergoes sequential oxidation and deprotonation steps to form [LFe IV (NH 2 ) 2 ] 2+ , and thereafter bimetallic coupling to form an N−N bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Maximum and Comparative Efficiency Calculations for Integrated Capture and Electrochemical Conversion of CO 2

CO 2 as a C1 feedstock is receiving increasing attention, but it typically exists in dilute or impure streams. The capture and conversion of CO 2 to fuels or chemicals using carbon-neutral energy mitigates carbon emissions when CO 2 is captured from point sources and results in net or negative carbon emissions when CO 2 is obtained by direct air capture. Additionally, CO 2 capture and conversion steps are typically viewed as separate processes that optimize either capture and concentration or catalytic conversions of pure streams of CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Operando Mechanistic Studies of CO 2 Hydrogenation by Ruthenium Complexes Using High-Pressure NMR Spectroscopy

As a result of increased energy demands, the ability to both reduce carbon dioxide with dihydrogen to formate and conduct the reverse reaction with the same catalyst is of interest as a method for potential fuel generation and use. Ruthenium bis(diphosphine) complexes with and without pendant amines were reacted with mixtures of CO 2 /H 2 gases in the presence of added base to catalytically yield formate; when the base was triethylamine, the reaction was found to be reversible. The reactions were monitored using high-pressure operando 1 H and 31 P{ 1 H} NMR spectroscopy at 18 °C in THF under 40 atm of a 1:1 mixture of H 2 and CO 2 . The rate of production of formate was correlated with the observation of specific organometallic species by NMR spectroscopy under catalytic conditions, including a hydrido–dihydrogen complex. From this operando study, a mechanism is proposed with two competing catalytic cycles for which the predominant cycle is dependent on which base and catalyst are used. Finally, the role of the base is shown to be vital for both catalytic rate and reversibility of the chemical transformation, indicating base selection should be carefully considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Molecular Catalysts with Diphosphine Ligands Containing Pendant Amines

Pendant amines play an invaluable role in chemical reactivity, especially for molecular catalysts based on Earth-abundant metals. As inspired by [FeFe]-hydrogenases, which contain a pendant amine positioned for cooperative bifunctionality, synthetic catalysts have been developed to emulate this multifunctionality through incorporation of a pendant amine in the second coordination sphere. Cyclic diphosphine ligands containing two amines serve as the basis for a class of catalysts that have been extensively studied and used to demonstrate the impact of a pendant base. These 1,5-diaza-3,7-diphosphacyclooctanes, now often referred to as “P 2 N 2 ” ligands, have profound effects on the reactivity of many catalysts. The resulting [Ni(P R 2 N R ´ 2 ) 2 ] 2+ complexes are electrocatalysts for both the oxidation and production of H 2 . Achieving the optimal benefit of the pendant amine requires that it has suitable basicity and is properly positioned relative to the metal center. In addition to the catalytic efficacy demonstrated with [Ni(P R 2 N R ´ 2 )2] 2+ complexes for the oxidation and production of H2, catalysts with diphosphine ligands containing pendant amines have also be demonstrated for a variety of metals for many different reactions, both in solution and immobilized on surfaces. Here, the impact of pendant amines in catalyst design has been demonstrated and continues to expand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Role of High-Spin Species and Pendant Amines in Electrocatalytic Alcohol Oxidation by a Nickel Phosphine Complex

We report the development of active and efficient electrocatalysts for oxidation of alcohols using earth-abundant metals will aid the progress towards a renewable energy economy. Here we present a detailed mechanistic study of electrocatalytic benzyl alcohol oxidation by a molecular nickel complex containing pendant amines using a combination of kinetic studies, NMR spectroscopy, and density functional theory. The catalyst preferentially binds alcohol in high-spin octahedral geometry, but this complex is not readily deprotonated by exogeneous base and inhibits catalysis. Dissociation of one or more solvent ligands returns the complex to a low-spin state that can be deprotonated. Kinetic modeling indicates the off-cycle high-spin intermediate lowers the catalytic turnover frequency by a factor of eight, suggesting that substantial gains in activity can be attained by improvements to the catalyst coordination geometry. In a second finding, we demonstrate the pendant amine of the catalyst only functions as a proton relay for the potential-determining step, oxidation of a nickel hydride intermediate, but does not have a substantial impact on the overall rate for oxidation of benzyl alcohol to benzaldehyde. This result contradicts the common expectation for pendant amines to participate in rate-limiting proton transfer reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Computational Study of Triphosphine-Ligated Cu(I) Catalysts for Hydrogenation of CO 2 to Formate

The catalyzed hydrogenation of CO 2 to formate via a triphosphine-ligated Cu(I) was studied computationally. Two bases, DBU and TBD, were studied in the context of two proposed mechanisms in MeCN solvent. Of the four functionals benchmarked, M06 was generally in the best agreement with the experimentally estimated values. Activation of H 2 was explored by using LCu(DBU) + to form LCuH. Dissociation of a ligand arm results in higher barriers to form the key hydride complex, LCuH. There is no significant difference between the choice of base, DBU or TBD with respect to the proposed mechanisms. We propose that the experimentally observed differences between DBU and TBD reactivity for this mechanism are due to off-pathway changes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrocatalytic Oxidation of Alcohol with Cobalt Triphosphine Complexes

Coordination of the tridentate ligand bis(2-diphenylphosphinoethyl)phenylphosphine (P3) to cobalt forms [(CH3CN)2CoIIP3](BF4)2 (CoIIP3). In the presence of the Brönsted base iPr2EtN, CoIIP3 electrocatalytically oxidizes benzyl alcohol (BnOH) to benzaldehyde at an applied potential of -630 mV vs Fc+/0 with a TON of 19.9. In a noncatalytic reaction with excess BnOH and iPr2EtN, CoIIP3 is reduced by one electron to [(CH3CN)2CoIP3]BF4 (CoIP3) with concomitant formation of half an equivalent of benzaldehyde. This stoichiometric oxidation of BnOH suggests electron transfer occurs between intermediate cobalt species and starting CoIIP3. Kinetics and computational studies support an unfavorable alcohol binding preequilibrium step followed by favorable deprotonation of bound alcohol.

Electrocatalysis, Alcohol oxidation, Electrooxidat↗
DOE OSTI2021

Thermodynamic Trends for Reduction of CO by Molecular Complexes

Selective reduction of CO 2 into fuels and chemical feedstocks is highly desirable to reduce our dependence on fossil fuels. Most molecular catalysts afford 2e – reduction products, such as CO or HCO 2 – , as opposed to more reduced products. Here we present an analysis of the thermodynamic limitations for reduction of the CO ligand in the form of a series of isostructural group 6 carbonyl complexes, Cp*M(CO) 3 (P(OMe) 3 ) + (M = Cr, Mo, and W). Additionally, the free energy for stepwise transfer of a hydride (H – ) and a proton (H + ) to the CO ligand, resulting in a hydroxycarbene (CHOH) complex, was measured by equilibration with H – /H + donors and acceptors with known hydricity or acidity. Together, these two reaction steps are equivalent to a net addition of H 2 across the CO ligand. A large and unfavorable free energy for H 2 addition (Δ G ° H2 ) was measured for all three complexes and decreases in the order Cr > Mo > W. The trend for these complexes is opposite to the trend previously reported for group 7 carbonyl complexes, for which Δ G ° H2 decreases moving up the group, Re > Mn. Computational analysis indicates the trends can be described in terms of electrostatic effects, where a low Δ G ° H2 is obtained in complexes that balance the atomic charges of the M–C≡O fragment of the complex. These findings can be used to design metal carbonyl complexes with a more energetically accessible H 2 addition, which will facilitate the development of molecular catalysts for reduction of CO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Oxidation of Ammonia with Molecular Complexes

Oxidation of ammonia by molecular complexes is a burgeoning area of research. Several scientific challenges underpin these efforts, requiring a fundamental understanding of individual reactions steps, particularly for cleavage of N-H bonds and formation of N-N bonds. Overall, this perspective evaluates the challenges of designing molecular catalysts for oxidation of ammonia, and highlights recent key contributions to realizing the goals of viable energy storage and retrieval based on the N-H bonds of ammonia in a carbon-free energy cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Controlling P–C/C–H Bond Cleavage in Nickel Bis(diphosphine) Complexes: Reactivity Scope, Mechanism, and Computations

The synthesis of heteroleptic [Ni(P 2 N 2 )(diphosphine)][BF 4 ] 2 complexes and the cleavage of P–C and C–H bonds of the P 2 N 2 ligand in those complexes are reported here. The products are five-coordinate complexes in which Ni–C and P–H bonds have formed to give a cyclic moiety containing Ni–CH$=$NR 2 . The reactivity of [Ni(P 2 N 2 )(diphosphine)][BF 4 ] 2 complexes is influenced by the rigidity of the diphosphine, the steric effect of the substituents, and length of the carbon linker of the diphosphine ligands. Diphosphine ligands bearing a rigid backbone (e.g., dmpbz, 1,2-bis(dimethylphosphino)benzene) or aromatic substituents (e.g., dppe, 1,2-bis(diphenylphosphino)ethane) react with [Ni(P t Bu 2 N Bn 2 )(CH 3 CN) 2 ][BF 4 ] 2 to give P–C/C–H bond cleavage products. Both [Ni(P t Bu 2 N Bn 2 )(dmpe)(MeCN)][BF 4 ] 2 and [Ni(P t Bu 2 N Bn 2 )(dmpm)(MeCN)][BF 4 ] 2 (dmpm = 1,2-bis(dimethylylphosphino)methane) were prepared by the reaction of [Ni(P t Bu 2 N Bn 2 )(CH 3 CN) 2 ][BF 4 ] 2 with the corresponding diphosphine ligands. [Ni(P t Bu 2 N Bn 2 )(dmpe)(MeCN)][BF 4 ] 2 readily undergoes P–C/C–H bond cleavage in nitromethane. In sharp contrast, [Ni(P t Bu 2 N Bn 2 )(dmpm)][BF 4 ] 2 is stabilized by dmpm, a diphosphine with small bite angle, and does not show P–C/C–H bond cleavage reactivity. Computational results show that for complexes bearing less bulky diphosphine ligands, such as dmpm, the barriers for the rate-determining transition states are in some examples higher than 30 kcal/mol with the M06 functional, higher than those for complexes bearing more rigid or more bulky ligands, consistent with experimental studies. The calculated barriers for the first transition state correlated with increased values of the dihedral angle formed by the two NiP 2 planes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The H•/H– Redox Couple and Absolute Hydration Energy of H–

A supermolecule-continuum approach with water clusters up to n = 16 H2O molecules has been used to predict the absolute hydration free energies at 298 K ($\Delta$G hyd ) of both hydrogen (H•) and hydride (H - ) to be 4.6 and -78 ± 2 kcal/mol, respectively. These values are combined with a high accuracy prediction of the gas phase electron affinity ($\Delta$G gas,298K = -16.9 kcal/mol) to determine the aqueous electron affinity of H• of 99.5 ± 2 kcal/mol, which yields a reduction potential for H• vs SHE of -0.03 ± 0.15 V. This value is in agreement within 0.2 V with most estimates obtained using a wide variety of approaches. The results of this study can be used to improve the absolute hydricity scale in water which provides additional insights into how a putative hydride interacts with solvent, but do not change the ability to predict the relative reactivity of two species using relative hydricity scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗