Search NASA⌕ Search

Engineering topics

Avramova, Maria

Publications and source records attributed to Avramova, Maria.

At least 37 records · Page 2

Three-dimensional fuel pin model validation by prediction of hydrogen distribution in cladding and comparison with experiment

To correctly describe and predict this hydrogen distribution there is a need for multi-physics coupling to provide accurate three-dimensional azimuthal, radial, and axial temperature distributions in the cladding. Coupled high-fidelity reactor-physics codes with a sub-channel code as well as with a computational fluid dynamics (CFD) tool have been used to calculate detailed temperature distributions. These high-fidelity coupled neutronics/thermal-hydraulics code systems are coupled further with the fuel-performance BISON code with a kernel (module) for hydrogen. Both hydrogen migration and precipitation/dissolution are included in the model. Results from this multi-physics analysis is validated utilizing calculations of hydrogen distribution using models informed by data from hydrogen experiments and PIE data.

36 MATERIALS SCIENCE↗

High-to-Low Activities across VVI, AMA and PHI

This milestone report documents work performed in CASL that was broadly focused on the use of validated high-fidelity simulation codes to inform, improve and calibrate low-fidelity codes to facilitate multiphysics coupling, design, performance analysis, and risk assessment. This high-to-low (Hi2Lo) initiative has the following objectives: employ physics encapsulated in high-fidelity codes to improve the functionality of low-fidelity codes, quantify biases in low-fidelity codes, develop and calibrate physical models and closure relations so that low-fidelity codes more accurately incorporate requisite physics, and develop low-fidelity codes that can be effectively coupled to simulate multiphysics behavior. In combination, these efforts are designed to impact both CIPS and DNB. For example, the development and experimental design-based Bayesian calibration of dynamic gas conductance models in CTFFuel will provide the capability to better model crud-induced power shifts. Whereas the present emphasis has focused on the high-fidelity codes STAR-CCM+ and BISON and low-fidelity codes CTF and CTFFuel, future emphasis will be expanded to include MAMBA. During the reporting period, Hi2Lo efforts focused on two broad components: demonstration of the experimental design-based Bayesian calibration framework to calibrate CTF using both STAR-generated synthetic data and experimental data, and the use of STAR to inform and improve the turbulence modeling and grid heat transfer modeling capabilities in CTF. A complementary milestone focused on the implementation and verification of fuel models in CTFFuel, for which we demonstrated initial calibration results. Future Hi2Lo work will focus on the use of the experimental design-based Bayesian calibration framework, demonstrated this year for STAR and CTF, to calibrate parameters in the fuel swelling, fuel irradiation-induced densification, and fuel relocation models in CTFFuel using both experimental and BISON-generated data. A second component will focus on the continued use of STAR to improve grid modeling capabilities in CTF.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development and Assessment of CTFFuel

This milestone report documents an approach that seeks to develop a standalone fuel solver to simulate steady-state and transient thermo-mechanical responses of light-water reactor fuel rods and assess its temperature predictions against analytical solutions, and a well-known and validated fuel performance code. This manuscript focuses on five major topics: (1) development of the CTFFuel, (2) discussion of the newly implemented fuel deformation models in dynamic gap conductance model of CTFFuel, (3) enabling the dynamic gap conductance model in VERA-CS, (4) verification of the solid conduction solution and comparison of the CTFFuel with respect to the workhorse code, CTF, and (5) benchmark of the thermal conductivity degradation using the burnup dependent fuel thermal conductivity models and benchmark of the fuel centerline temperature using the dynamic gap conductance model with Halden measurements and FRAPCON-4.0 simulation results. CTFFuel temperature predictions are compared to predictions from FRAPCON-4.0 for UO 2 , UO 2 +Gd 2 O 3 and MOX fuels through reactor’s life. The main motivation is to understand discrepancies between CTFFuel and FRAPCON-4.0’s temperature predictions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Review of CTF’s Fuel Rod Modeling Using FRAPCON-4.0’s Centerline Temperature Predictions

Coolant Boiling in Rod Arrays–Two Fluid (COBRA-TF), or CTF1 [1], is a nuclear thermal hydraulic subchannel code used throughout academia and industry. CTF’s fuel rod modeling is originally developed for VIPRE code [2]. Its methodology is based on GAPCON [3] and FRAP [4] fuel performance codes, and material properties are included from MATPRO handbook [5]. This work focuses on review of CTF’s fuel rod modeling to address shortcomings in CTF’s temperaturepredictions. CTF is compared to FRAPCON which is U.S. NRC’s steady-state fuel performance code for light-water reactor fuel rods. FRAPCON calculates the changes in fuel rod variables and temperatures including the eects of cladding hoop strain, cladding oxidation, hydriding, fuel irradiation swelling, densification, fission gas release and rod internal gas pressure. It uses fuel, clad and gap material properties from MATPRO. Additionally, it has its own models for fission gas release, cladding corrosion and cladding hydrogen pickup. It allows finite dierence or finite element approaches for its mechanical model.In this study, FRAPCON-4.0 [6] is used as a reference fuel performance code. In comparison, Halden Reactor Data for IFA432 Rod 1 and Rod 3. CTF simulations are performed in two ways; informing CTF with gap conductance value from FRAPCON, and using CTF’s dynamic gap conductance model.First case is chosen to show temperature is predicted correctly with CTF’s models for thermal and cladding conductivities once gap conductance is provided. Latter is to review CTF’s dynamic gap conductance model. These Halden test cases are selected to be representative of cases with and without any physical contact between fuel-pellet and clad while reviewing functionality of CTF’s dynamic gap conductance model. Improving the CTF’s dynamic gap conductance model will allowprediction of fuel and cladding thermo-mechanical behavior under irradiation, and better temperature feedbacks from CTF in transient calculations.

Toptan, Aysenur↗

VERA 3.6 - CTF User's Manual

This document describes how to make a CTF input deck. A CTF input deck is organized into Card Groups and Cards. A Card Group is a collection of Cards. A Card is de ned as a line of input. Each Card may contain multiple data. A Card is terminated by making a new line. This document has been organized so that each Card Group is discussed in its own dedicated chapter. Each card is discused in its own dedicated section. Each data in the card is discussed in its own block. The block gives information about the data, including the number of the input, the title, a description of the meaning of the data, units, data type, and so on. An example block is shown below to discuss the meaning of each entry in the block.

97 MATHEMATICS AND COMPUTING↗

Development and Implementation of CFD-Informed Models for the Advanced Subchannel Code CTF

The research described in this PhD thesis contributes to the development of efficient methods for utilization of high-fidelity models and codes to inform low-fidelity models and codes in the area of nuclear reactor core thermal-hydraulics. The objective is to increase the accuracy of predictions of quantities of interests using high-fidelity CFD models while preserving the efficiency of low-fidelity subchannel core calculations. An original methodology named Physics- based Approach for High-to-Low Model Information has been further developed and tested. The overall physical phenomena and corresponding localized effects, which are introduced by the presence of spacer grids in light water reactor (LWR) cores, are dissected in corresponding four building basic processes, and corresponding models are informed using high-fidelity CFD codes. These models are a spacer grid-directed cross-flow model, a grid-enhanced turbulent mixing model, a heat transfer enhancement model, and a spacer grid pressure loss model. The localized CFD-models are developed and tested using the CFD code STAR-CCM+, and the corresponding global model development and testing in sub-channel formulation is performed in the thermal- hydraulic subchannel code CTF. The improved CTF simulations utilize data-files derived from CFD STAR-CCM+ simulation results covering the spacer grid design desired for inclusion in the CTF calculation. The current implementation of these models is examined and possibilities for improvement and further development are suggested. The validation experimental database is extended by including the OECD/NRC PSBT benchmark data. The outcome is an enhanced accuracy of CTF predictions while preserving the computational efficiency of a low-fidelity subchannel code.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development and Assessment of CTF for Pin-resolved BWR Modeling

CTF is the modernized and improved version of the subchannel code, COBRA-TF. It has been adopted by the Consortium for Advanced Simulation for Light Water Reactors (CASL) for subchannel analysis applications and thermal hydraulic feedback calculations in the Virtual Environment for Reactor Applications Core Simulator (VERA-CS). CTF is now jointly developed by Oak Ridge National Laboratory and North Carolina State University. Until now, CTF has been used for pressurized water reactor modeling and simulation in CASL, but in the future it will be extended to boiling water reactor designs. This required development activities to integrate the code into the VERA-CS workflow and to make it more ecient for full-core, pin resolved simulations. Additionally, there is a significant emphasis on producing high quality tools that follow a regimented software quality assurance plan in CASL. Part of this plan involves performing validation and verification assessments on the code that are easily repeatable and tied to specific code versions. This work has resulted in the CTF validation and verification matrix being expanded to include several two-phase flow experiments, including the General Electric 3 3 facility and the BWR Full-Size Fine Mesh Bundle Tests (BFBT). Comparisons with both experimental databases is reasonable, but the BFBT analysis reveals a tendency of CTF to overpredict void, especially in the slug flow regime. The execution of these tests is fully automated, analysis is documented in the CTF Validation and Verification manual, and the tests have become part of CASL continuous regression testing system. This paper will summarize these recent developments and some of the two-phase assessments that have been performed on CTF.

Salko, Robert K↗

CFD-Informed Spacer Grid Models in CTF: Heat Transfer Enhancement and Form Pressure Losses

This report presents the current status of the pressure loss coefficient and heat transfer enhancement models derived for CTF from computational fluid dynamics (CFD) data. This is an effort to improve the modeling capabilities of CTF using results from a higher-fidelity code such as STAR-CCM+. The following four phenomena are the current scope of CFD-informed spacer grid models for CTF: (1) grid directed lateral cross-flow effects; (2) grid-induced turbulent-mixing effects; (3) grid-induced heat transfer enhancement downstream of the grid; and (4) the detailed pressure-loss effects caused by the spacer grid. This document covers phenomena (3) and (4) and how they are captured using CFD data. Please refer to CASL-U-2015-0020-000 for a discussion on phenomena (1) and (2).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

CTF User's Manual

This document describes how to make a CTF input deck. A CTF input deck is organized into Card Groups and Cards. A Card Group is a collection of Cards. A Card is defined as a line of input. Each Card may contain multiple data. A Card is terminated by making a new line.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Improvement of Wall Drag Modeling Capabilities of CTF

Coolant Boiling in Rod Arrays-Two Fluid (COBRA-TF), or CTF, is a nuclear thermal hydraulic subchannel code used throughout academia and industry. It solves discretized forms of nine coupled equations for the mass, momentum, and energy equations for the liquid and vapor fields; the mass and momentum equation for the droplet field; and the energy equation for solid structures. This work focuses on improving the wall drag modeling capabilities of CTF by adding new friction models that account for surface roughness. Prior to this work, CTF used simple correlations that assumed that surfaces were smooth. In reality, different materials in the reactor have varying degrees of roughness that act to increase drag and frictional pressure drop. The frictional pressure drop is important, as it partly defines the driving head necessary for achieving certain flow conditions. This is particularly important in passively cooled systems that rely on natural circulation. Therefore, the effects of surface roughness cannot be neglected, as it affects flow rate and distribution, heat transfer and turbulence. (authors)

42 ENGINEERING↗

Advances in Fuel Rod Modeling in Subchannel Thermal-Hydraulic Codes

Coolant Boiling in Rod Arrays-Two Fluid (COBRA-TF), or CTF, is a nuclear thermal hydraulic subchannel code used throughout academia and industry. It solves discretized forms of nine coupled equations for the mass, momentum, and energy equations for the liquid and vapor fields; the mass and momentum equation for the droplet field; and the energy equation for solid structures. This work focuses on improving the temperature predictions of CTF by adding new fuel thermal conductivity models that account for burnup, gadolinia content in addition to temperature. Prior to this work, CTF used a temperature dependent fuel thermal conductivity model. In reality, the fuel thermal conductivity is affected by fission product buildup and radiation damage under irradiation. This results in fuel thermal conductivity degradation, and correspondingly an increase in fuel centerline temperature. Accounting of the irradiation effects is particularly important for correct prediction of fuel temperature profile for the Doppler feedback calculation. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uncertainty Analysis of CTF for the Uncertainty Analysis in Modeling Benchmark

This work describes the results of a quantitative sensitivity and uncertainty analysis of the thermal hydraulic subchannel code, Coolant Boiling in Rod Arrays - Three Field (COBRA-TF). Four steady state cases from Phase II, Exercise 3 of the Organisation for Economic Co-operation and Development/Nuclear Energy Agency Uncertainty Analysis in Modeling (OECD/NEA UAM) Benchmark are analyzed using the statistical analysis tool, Design Analysis Kit for Optimization and Tera-scale Applications (Dakota). This study supports the larger goal of the UAM Benchmark, which is to assess the uncertainty inherent in nuclear codes in a straightforward framework. The benchmark first focuses on assessing the uncertainty in stand-alone codes and then uses these results to propagate those uncertainties to coupled calculations. The work presented here adds to the existing results for this benchmark. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

CFD-Informed Spacer Grid Models in the Subchannel Code CTF

Data from computational fluid dynamics (CFD) simulations can be utilized to improve the predictive capabilities of the subchannel code CTF. Past work incorporating CFD results into CTF has included accounting for directed crossflow and turbulent mixing between adjacent subchannels. Spacer grids impact fluid flow in various ways, and this work focuses on four spacer grid effects, namely: 1. Directed crossflow; 2. Turbulent mixing; 3. Enhanced downstream heat transfer; 4. Pressure drop correlation. Heat transfer augmentation occurs partially due to the disturbances in the developed flow and from the additional turbulence generated by the presence of obstructions in the fluid flow's path. The boundary layer disruption is caused in part by the newly-directed flow just downstream of the spacer grid vanes. This effect lessens as the distance from the grid increases and the flow returns to its developed state, closer to what would be expected in a bare subchannel. Current plans of this work are to develop a method for incorporating the effects of spacer grids on the heat transfer calculation within CTF. Proposed techniques include the addition of an enhancement factor to the local heat transfer coefficient. The inclusion of CFD data from properly-designed simulations will allow CTF to better predict parameters such as fluid temperatures near spacer grids. Improved pressure loss coefficients for each grid can also be generated using CFD simulations. The heat transfer modification has been studied, with other authors noting correlations which are dependent on grid properties such as the blockage ratio. Parameters considered in this study are the turbulent kinetic energy (TKE) and vorticity. There are currently no models to calculate or store either of these parameters within CTF. When accounting for spacer grid effects in CTF, it is important to not double-count the effects towards two different CTF models. This requires carefully designing CFD simulations around capturing specific phenomena from the grids and being able to apply these CFD results to all appropriate flow conditions. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Critical Heat Flux Model Improvement in CTF for Natural Circulation Type Reactors

The objective of this study was to enhance the departure from nucleate boiling (DNB) modeling capabilities of the subchannel analysis code CTF. The intent was to include consideration for PWR-type reactors which are characterized by relatively low subchannel mass flux and high inlet subcooling during normal operation. Identifying a CHF model appropriate for these type of conditions is required for an accurate thermal-hydraulics performance analysis. Several CHF models that are available in open literature, including those already implemented in CTF, were studied for their applicability. This includes the CHF models by Westinghouse (W-3), Electric Power Research Institute (EPRI-1), Biasi, Bowring, and Groeneveld. Since the models were developed within a certain validity range of operating conditions (mass flux, equilibrium quality, pressure, hydraulic diameter, and others), these ranges were used as a measure of acceptability. It was found in these considerations that the Groeneveld and Bowring models were the most appropriate. Therefore, the models by Bowring and Groeneveld were selected for implementation in CTF. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

CTF Preprocessor User's Manual

This document describes how a user should go about using the CTF pre- processor tool to create an input deck for modeling rod-bundle geometry in CTF. The tool was designed to generate input decks in a quick and less error-prone manner for CTF. The pre-processor is a completely independent utility, written in Fortran, that takes a reduced amount of input from the user. The information that the user must supply is basic information on bundle geometry, such as rod pitch, clad thickness, and axial location of spacer grids--the pre-processor takes this basic information and determines channel placement and connection information to be written to the input deck, which is the most time-consuming and error-prone segment of creating a deck. Creation of the model is also more intuitive, as the user can specify assembly and water-tube placement using visual maps instead of having to place them by determining channel/channel and rod/channel connections. As an example of the benefit of the pre-processor, a quarter-core model that contains 500,000 scalar-mesh cells was read into CTF from an input deck containing 200,000 lines of data. This 200,000 line input deck was produced automatically from a set of pre-processor decks that contained only 300 lines of data.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

CTF Validation and Verification Manual

Coolant-Boiling in Rod Arrays- Two Fluids (COBRA-TF) is a Thermal/Hydraulic (T/H) simulation code designed for Light Water Reactor (LWR) analysis. It uses a two-fluid, three-field (i.e. fluid film, fluid drops, and vapor) modeling approach. Both sub-channel and 3D Cartesian forms of nine conservation equations are available for LWR modeling. The code was originally developed by Pacific Northwest Laboratory in 1980 and has been used and modified by several institutions over the last several decades. COBRA-TF is also used at the Pennsylvania State University (PSU) by the Reactor Dynamics and Fuel Management Group (RDFMG), and has been improved, updated, and subsequently became the PSU RDFMG version of COBRA-TF (CTF). One part of the improvement process includes validating the methods in CTF. This document seeks to provide a certain level of certainty and confidence in the predictive capabilities of the code for the scenarios it was designed to model--rod bundle geometries with operating conditions that are representative of prototypical Pressurized Water Reactor (PWR)s and Boiling Water Reactor (BWR)s in both normal and accident conditions. This is done by modeling a variety of experiments that simulate these scenarios and then presenting a qualitative and quantitative analysis of the results that demonstrates the accuracy to which CTF is capable of capturing specific quantities of interest.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development and Testing of CTF to Support Modeling of BWR Operating Conditions

This milestone supports developing and assessing COBRA-TF (CTF) for the modeling of boiling water reactors (BWRs). This is achieved in three stages. First, a new preprocessor utility that is capable of handling BWR-specic design elements (e.g., channel boxes and large water rods) is developed. A previous milestone (L3:PHI.CTF.P12.01) led to the development of this preprocessor capability for single assembly models. This current milestone expands this utility so that it is applicable to multi-assembly BWR models that can be modeled in either serial or parallel. The second stage involves making necessary modications to CTF so that it can execute these new models. Specically, this means implementing an outer-iteration loop, specic to BWR models, that equalizes the pressure loss over all assemblies in the core (which are not connected due to the channel boxes) by adjusting inlet mass ow rate. A third stage involves assessing the standard convergence metrics that are used by CTF to determine when a simulation is steady-state. The nal stage has resulted in the implementation of new metrics in the code that give a better indication of how steady the solution is at convergence. This report summarizes these eorts and provides a demonstration of CTF's BWR-modeling capabilities. CASL-U-2016-1030-000

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗