Search NASA⌕ Search

Engineering topics

Bauschlicher, Charles W., Jr.

Publications and source records attributed to Bauschlicher, Charles W., Jr..

At least 127 records · Page 7

A comparison of the coupled cluster and internally contracted averaged coupled-pair functional levels of theory for the calculation of the MCH2(+) binding energies for M = Sc to Cu

The correlation contribution to the M-C binding energy for the MCH2(+) systems can exceed 100 kcal/mol. At the self-consistent field (SCF) level, these systems can be more than 50 kcal/mol above the fragment energies. In spite of the poor zeroth-order reference, the coupled cluster single and double excitation method with a perturbational estimate of triple excitations, CCSD(T), method is shown to provide an accurate description of these systems. The maximum difference between the CCSD(T) and internally contracted averaged coupled-pair functional binding energies is 1.5 kcal/mol for CrCH2(+), with the remaining systems agreeing to within 1.0 kcal/mol.

Bauschlicher, Charles W., Jr.↗

The 2Sigma(+)-2Pi separation in KO

The 2Sigma(+)-2Pi separation in KO is investigated using large basis sets and high levels of correlation treatment. Relativistic effects are included at the Dirac-Fock level and reduce the separation only slightly. The basis set superposition error is considered in detail. On the basis of these calculations, our best estimate places the 2Pi3/2 state about 200/cm above the ground 2Sigma(+) state, in agreement with our previous estimate.

Bauschlicher, Charles W., Jr.↗

Calculation of Mg(+)-ligand relative binding energies

The calculated relative binding energies of 16 organic molecules to Mg(+) are compared with experimental results where available. The geometries of the ligands and the Mg(+)-ligand complexes arc optimized at the self-consistent field level using a 6-31G* basis set. The Mg(+) binding energies are evaluated using second-order perturbation theory and basis sets of triple-sigma quality augmented with two sets of polarization functions. This level of theory is calibrated against higher levels of theory for selected systems. The computed binding energies are accurate to about 2 kcal/mol.

Partridge, Harry↗

Theoretical study of the 2A2-2B2 separation of the alkali superoxides

The computed 2A2-2B2 separations of the alkali superoxides are in good agreement with those deduced from electron-spin resonance spectra. The calculations definitively show that the ground state of CsO2 is 2A2. The larger than expected separation for CsO2, based on the trend from LiO2 to RbO2, is attributed primarily to the differential effects of core relaxation. The CsO2 dissociation energy is computed to be 42.7 kcal/mol, with an uncertainty conservatively estimated as +/- 4 kcal/mol.

Bauschlicher, Charles W., Jr.↗

Comparative study of the dissociation energies of Ni2 and Ni2(+)

Computations at the internally contracted averaged coupled-pair-functional level of theory yield a dissociation energy (Do) for Ni2(+) that is 0.17 eV larger than that of Ni2. This finding is consistent with the collision-induced dissociation experiments of Lian, Su, and Armentrout, but rules out the results from the resonant two-photon dissociation experiments of Lessen and Brucat, which predict that the Do value of Ni2(+) is about 1 eV larger than that of Ni2.

Bauschlicher, Charles W., Jr.↗

Theoretical determination of the alkali-metal superoxide bond energies

The bond dissociation energies for the alkali-metal superoxides have been computed using extensive Gaussian basis sets and treating electron correlation at the modified coupled-pair functional level. Our computed D0 values are 61.4, 37.2, 40.6, and 38.4 kcal/mol for LiO2, NaO2, KO2, and RbO2, respectively. These values, which are expected to be lower bounds and accurate to 2 kcal/mol, agree well with some of the older flame data, but rule out several recent experimental measurements.

Partridge, Harry↗

Theoretical study of the bond dissociation energies of propyne (C3H4)

The C-C and C-H bond dissociation energies (BDEs) of propyne have been computed using the modified coupled-pair functional method. Due to hyperconjugation, the C-C and methyl C-H single bonds are stronger and weaker, respectively than those in ethane. The acetylenic C-H and C triple bond C BDEs are larger and smaller, respectively, than in acetylene, also as a result of the hyperconjugation. Our best estimate of 92.5 +/- 2 kcal/mol for the methyl C-H BDE in propyne is slightly larger than the experimental value. For the acetylenic C-H BDE in propyne we predict 135.9 +/- 2 kcal/mol.

Bauschlicher, Charles W., Jr.↗

A theoretical study of Mg(CO2)n(+) and Sr(CO2)n(+) for n = 1 and 2 and Mg2CO2(+)

The structure and binding energies are determined for Mg(CO2)n(+) and Sr(CO2)n(+) for n = 1 and 2. We also consider Mg2(+) and Mg2CO2(+) to compare the binding of CO2 to a single metal ion with the binding to a diatomic ion. The vertical excitation energies are computed for all species. The potential energy curves for the low-lying states of Mg2(+) are reported. The MgCO2(+) results are in good agreement with the experimental results of Duncan and co-workers.

Sodupe, Mariona↗

Theoretical study of transition-metal ions bound to benzene

Theoretical binding energies are reported for all first-row and selected second-row transition metal ions (M+) bound to benzene. The calculations employ basis sets of at least double-zeta plus polarization quality and account for electron correlation using the modified coupled-pair functional method. While the bending is predominantly electrostatic, the binding energies are significantly increased by electron correlation, because the donation from the metal d orbitals to the benzene pi* orbitals is not well described at the self-consistent-field level. The uncertainties in the computed binding energies are estimated to be about 5 kcal/mol. Although the calculated and experimental binding energies generally agree to within their combined uncertainties, it is likely that the true binding energies lie in the lower portion of the experimental range. This is supported by the very good agreement between the theoretical and recent experimental binding energies for AgC6H6(+).

Bauschlicher, Charles W., Jr.↗

Theoretical study of Cr(+) and Co(+) bound to H2 and N2

Binding energies of Co(H2)n(+) (n = 1-3) and CrN2(+) computed using the modified coupled-pair functional approach agree well with measured values. The calculations show that both H2 and N2 bond much more strongly to Co(+) than to Cr(+). Theoretical studies also show that despite the similar polarizabilities of N2 and Ar, the CrN2(+) binding energy is twice as large as that of CrAr(+) due to the charge-quadrupole contribution. Finally, the bonding of H2 and N2 with Na(+) and Mg(+) is contrasted with that for Cr(+) and Co(+).

Bauschlicher, Charles W., Jr.↗

A theoretical study of the positive and dipositive ions of M(NH3)n and M(H2O)n for M = Mg, Ca, or Sr

The structure and binding energies are determined for many of the M(H2O)n(+) and M(H2O)n(2+) species, for n = 1-3 and M = Mg, Ca, or Sr. The trends are explained in terms of metal sp or sd-sigma hybridization and core polarization. The M(NH3)n(+) systems, with M = Mg or Sr, are also studied. For the positive ions, the low-lying excited states are also studied and compared with experiment. The calculations suggest an alternative interpretation of the SrNH3(+) spectrum.

Bauschlicher, Charles W., Jr.↗

The calculation of the vibrational frequencies of CuCO+, NiCO and CuCH3

The vibrational frequencies of CuCO+, NiCO, and CuCH3 are computed at both the self-consistent-field (SCF) and coupled-cluster singles and doubles, with a perturbational estimate of the triples (CCSD(T)), levels of theory. Overall the SCF frequencies are in qualitative agreement with the CCSD(T) results. The calculations show that the frequencies for the electrostatically bound CuCO+ are quite different from the datively bound NiCO. The CCSD(T) calculations support a previous suggestion that the C-H stretches in CuCH3 have been misassigned.

Sodupe, M.↗

Theoretical study of the BeLi, BeNa, MgLi, MgNa, and AlBe molecules and their negative ions

The alkaline earth-alkali diatomics are found to have weak bonds, because the diffuse alkali valence s orbitals cannot form a bond of sufficient strength to pay the promotion energy of the alkaline-earth atoms. This leads to van der Waals bonding in the neutrals as well as the negative ions. In fact, the negative ions have larger binding energies than the neutrals as a result of the much larger polarizability of the negative ion. The binding energy of AlBe is significantly larger than the Be-alkali molecules, due to a covalent contribution to the bonding. The binding energy in AlBe(-) is considerably larger than AlBe; the binding energy of the X 3Sigma(-) state of AlBe(-) is computed to be 1.36 eV, as compared with 0.57 eV for the X 2Pi state of AlBe.

Bauschlicher, Charles W., Jr.↗

Theoretical study of the bond dissociation energies of methanol

A theoretical study of the bond dissociation energies for H2O and CH3OH is presented. The C-H and O-H bond energies are computed accurately with the modified coupled-pair functional method using a large basis set. For these bonds, an accuracy of +/- 2 kcal/mol is achieved, which is consistent with the C-H and C-C single bond energies of other molecules. The C-O bond is much more difficult to compute accurately because it requires higher levels of correlation treatment and more extensive one-particle basis sets.

Bauschlicher, Charles W., Jr.↗

Theoretical study of the bonding of the first-row transition-metal positive ions to ethylene

Ab initio calculations were performed to study the bonding of the first-row transition-metal ions with ethylene. While Sc(+) and Ti(+) insert into the pi bond of ethylene to form a three-membered ring, the ions V(+) through Cu(+) form an electrostatic complex with ethylene. The binding energies are compared with those from experiment and with those of comparable calculations performed previously for the metal-acetylene ion systems.

Sodupe, M.↗

Theoretical study of the bonding of the first- and second-row transition-metal positive ions to methylene

The geometries of the molecules formed by the interaction of the first- and second-row transition-metal cations with methylene are optimized at the modified coupled-pair functional (MCPF) level of theory using large Gaussian basis sets, and their dissociation energies are computed employing both the MCPF and internally contracted averaged coupled-pair functional (ICACPF) methods. The computed binding energies are generally in good agreement with the available experimental results, although the calculations indicate that the experimental values for ScCH2(+), TiCH2(+), and NbCH2(+) are probably too large. The nature of the bonding in each case and trends in the bonding patterns across the transition-metal rows are discussed.

Bauschlicher, Charles W., Jr.↗

Theoretical study of the alkaline-earth metal superoxides BeO2 through SrO2

Three competing bonding mechanisms have been identified for the alkaline-earth metal superoxides: these result in a change in the optimal structure and ground state as the alkaline-earth metal becomes heavier. For example, BeO2 has a linear 3Sigma(-)g ground-state structure, whereas both CaO2 and SrO2 have C(2v)1A1 structures. For MgO2, the theoretical calculations are less definitive, as the 3A2 C(2v) structure is computed to lie only about 3 kcal/mol above the 3Sigma(-)g linear structure. The bond dissociation energies for the alkaline-earth metal superoxides have been computed using extensive Gaussian basis sets and treating electron correlation at the modified coupled-pair functional or coupled-cluster singles and doubles level with a perturbational estimate of the triple excitations.

Bauschlicher, Charles W., Jr.↗

Theoretical study of metal ions bound to He, Ne, and Ar

Accurate ab initio calculations for all of the first-row transition-metal ions with He, Ne, and Ar were performed at the modified coupled-pair functional level of electron correlation treatment. It is concluded that there is a strong correlation between the binding energy and bond length, since the bonding is predominantly electrostatic. The calculated binding energies are found to be about 20 pct less than the experimental values due to the theoretical limitations.

Partridge, Harry↗