The metal-ligand binding energies for Sr(H2O)n(+)
Explore the source record for details and available documents.
Sodupe, M.↗
Engineering topics
Bauschlicher, Charles W., Jr.
Publications and source records attributed to Bauschlicher, Charles W., Jr..
Theoretical study of the low-lying bound states of O2
It is demonstrated that a complete-active-space self-consistent-field (CASSCF) (2p)/MRCI + Q (multireference configuration interaction with a Davidson correction) description in a (13s8p6d 4f2g)/((5s4p3d 2f1g) atomic natural orbits (ANO) basis set supplemented with diffuse functions provides a quantitative description of the six lowest states of O2. The calculated potentials are within 0.05 eV (1.2 kilocal/mol) of accurate experimental results. The importance of substantially expanding the primitive basis set has been investigated, and it is demonstrated that such expansions yield insignificant improvement in the spectroscopic constants. Potential energy curves have also been reported for the weakly bound states of O2. The 5Pi(g) state is estimated to have a D(e) of 0.16 +/- 0.03 eV. The upper bound of D(e) is found to be sufficiently large that the importance of this state as a precursor for the formation of O2 (b 1Sigma(t)(+)) and O(1S) should be reconsidered.
Partridge, Harry↗
Quantum mechanical calculations to chemical accuracy
The accuracy of current molecular-structure calculations is illustrated with examples of quantum mechanical solutions for chemical problems. Two approaches are considered: (1) the coupled-cluster singles and doubles (CCSD) with a perturbational estimate of the contribution of connected triple excitations, or CCDS(T); and (2) the multireference configuration-interaction (MRCI) approach to the correlation problem. The MRCI approach gains greater applicability by means of size-extensive modifications such as the averaged-coupled pair functional approach. The examples of solutions to chemical problems include those for C-H bond energies, the vibrational frequencies of O3, identifying the ground state of Al2 and Si2, and the Lewis-Rayleigh afterglow and the Hermann IR system of N2. Accurate molecular-wave functions can be derived from a combination of basis-set saturation studies and full configuration-interaction calculations.
Bauschlicher, Charles W., Jr.↗
Theoretical study of the spectroscopy of B2
A study is made of the singlet, triplet, and quintet states of B2 below 45,000/cm at the multireference configuration-interaction level. The stronger bonding in B2, as compared with Al2, manifests itself in the potential energy curves. In B2, five of the six states dissociating to the ground state atoms are bound, compared with only two for Al2. Radiative lifetimes are reported for the lowest vibrational level of many of the bound triplet states of B2.
Langhoff, Stephen R.↗
A theoretical study of Na(H2O)n(+) (n = 1-4)
The successive H2O binding energies of Na(H2O)n(+) are in excellent agreement with experiment and are rather insensitive to electron correlation since the bonding is predominantly electrostatic. A point-charge model shows that changes in the successive binding energies are due primarily to ligand-ligand repulsion. Vibrational frequencies and IR intensities are determined for Na(H2O)n(+) (n = 1-4) at the self-consistent-field and second-order Moller-Plesset levels of theory to facilitate experimental study of these ions.
Bauschlicher, Charles W., Jr.↗
Theoretical study of the bonding of Nb(2+) to CH2, C2H2, and C2H4
The bonding of Nb(2+) with CH2, C2H2, and C2H4 is studied by using electronic structure calculations that include high levels of electron correlation. The binding energy for NbCH2(2+) is in good agreement with the lower bound determined from the reaction with CH4 but is significantly smaller than the value determined from the binding energy and ionization potential of NbCH2(+). The calculations and a new interpretation of the experiment indicate that the larger value is in error primarily because the ionization potential of NbCH2(+) determined from bracketing charge-exchange reactions is too small. The computed binding energy of NbC2H2(2+) is in good agreement with experiment. The calculations show that the bonding is predominantly covalent in character for both NbCH2(2+) and NbC2H2(2+), whereas for NbC2H4(2+) the electronic states that are predominantly ionic and covalent are nearly degenerate. The trend in binding energies, CH2 greater than C2H2 greater than C2H4, is consistent with the energy required to prepare the ligands for bonding.
Bauschlicher, Charles W., Jr.↗
A theoretical study of the low-lying states of Ti2 and Zr2
The low-lying states of Ti2 and the valence isoelectronic Zr2 are examined theoretically by means of a multireference configuration-interaction (MRCI) method. MRCI calculations demonstrate that two of the Zr2 states are very low-lying and that the resulting vertical excitation is consistent with the optical spectrum of Zr2. The ground state is predicted for Ti2 on the basis of valence correlation with the MRCI method and the average coupled-pair functional technique. Calculations of the inner-shell correlation effects are estimated and found to lower the 3Delta g state to a ground state, and another to a very low-lying state. The ground state of Ti2 is assigned to 3Delta g since it is lower than the other state at all levels of correlation and is derived from the same atomic asymptote. This conclusion is supported by the lack of an electron-spin resonance signal but contradicts the absence of subcomponents on the Raman spectral lines.
Bauschlicher, Charles W., Jr.↗
Theoretical study of the spectroscopy of FeH(+)
High-level ab initio calculations are reported for the low-lying states of the FeH(+) molecule. The ground state is determined to be X 5Delta with the low-lying 5Pi state lying about 600/cm higher. The excited states of FeH(+) are repulsive in the Franck-Condon region of the ground state. Thus it is likely that FeH(+) is photodissociated in stellar atmospheres. The strongest transition should be the (3) 5Delta - X 5Delta transition near 30,000/cm, which should give rise to a structureless feature in the absorption spectrum due to the repulsive nature of the upper state. All of the perpendicular transitions are computed to be very weak. The D0 value of FeH(+) is computed to be 50.2 kcal/mole, which should be the most accurate theoretical value to date.
Langhoff, Stephen R.↗
Al(+)-ligand binding energies
Ab initio calculations are used to optimize the structure and determine the binding energies of Al(+) to a series of ligands. For Al(+)-CN, the bonding was found to have a large covalent component. For the remaining ligands, the bonding is shown to be electrostatic in origin. The results obtained for Al(+) are compared with those previously reported for Mg(+).
Sodupe, M.↗
Mg(+)-ligand binding energies
Ab initio calculations are used to optimize the structures and determine the binding energies of Mg(+) to a series of ligands. Mg(+) bonds electrostatically with benzene, acetone, H2, CO, and NH3 and a self-consistent-field treatment gives a good description of the bonding. The bonding in MgCN(+) and MgCH3(+) is largely covalent and a correlated treatment is required.
Bauschlicher, Charles W., Jr.↗
A determination of Mg(+)-ligand binding energies
Theoretical calculations employing large basis sets and including correlation are carried out for Mg(+) with methanol, water, and formaldehyde. For Mg(+) with ethanol and acetaldehyde, the trends in the binding energies are studied at the self-consistent-field level. The predictions for the binding energy of Mg(+) to methanol and water of 41 + or - 5 and 36 + or - 5 kcal/mol, respectively, are much less than the experimental upper bounds, of 61 + or - 5 and 60 + or - 5 kcal mol, determined by using photodissociation techniques. The theoretical results are inconsistent with the onset of Mg(+) production observed in the photodissociation experiments, as the smallest absorptions are calculated at about 80 kcal/mol for both Mg(+)-CH3OH and Mg(+)-H2O, and these transitions are to bound excited states. The binding energy for Mg(+) with formaldehyde is predicted to be similar to Mg(+)-H2O. The relative binding energies are in reasonable agreement with experiment. The binding energy of a second water molecule to Mg(+) is predicted to be similar to the first. This suggests that the reduced reaction rate observed for the second ligand is not a consequence of a significantly smaller binding energy, at least for the smaller ligards such as those considered in this work.
Bauschlicher, Charles W., Jr.↗
Theoretical study of the NO beta system
A theoretical determination of the transition moment functions (TMFs) for the beta system of NO is presented. High levels of correlation treatment are required to show the changing degree of Rydberg character in the B2II with decreasing r values. The state-averaged complete-active-space self-consistent-field multireference configuration-interaction method is used for the determination. Previous lifetime measurements made with laser-induced fluorescence, varying between 2 and 0.85 microns, are discussed in terms of the calculated lifetimes for v-prime values 0-6, which vary from 2.12-1.17 microns. When larger r values are used for the transition moment function, the calculated lifetimes correlate with experimental lifetimes. The Einstein coefficients agree with experimental results, although limitations in the calibration of the spectrometer can account for systematic differences. The correlation with earlier experimental results suggests that radiative lifetimes are in the range of 1-2 microns.
Langhoff, Stephen R.↗
The computation of C-C and N-N bond dissociation energies for singly, doubly, and triply bonded systems
The bond dissociation energies (De) of C2H2, C2H4, C2H6, N2, N2H2, and N2H4 are studied at various levels of correlation treatment. The convergence of De with respect to the one-particle basis is studied at the single-reference modified coupled-pair-functional (MCPF)level. At all levels of correlation treatment, the errors in the bond dissociation energies increase with the degree of multiple bond character. The multireference configuration-interaction (MRCI) De values, corrected for an estimate of higher excitations, are in excellent agreement with those determined using the size-extensive averaged-coupled-pair-functional (ACPF) method. The full-valence complete-active-space self-consistent-field (CASSCF)/MRCI calculations are reproduced very well by MRCI calculations based on a CASSCF calculation that includes in the active space only those electrons involved in the C-C or N-N bonds.
Langhoff, Stephen R.↗
Theoretical study of the bonding of Sc, Y, and La singly charged and dipositive ions to C2H2, C2H4, and C3H6
The interaction of the Sc and Y singly-charged and dipositive ions with C2H2, C2H4, and C3H6 is studied using electronic structure calculations that include high levels of electron correlation. These results are compared with comparable calculations performed previously for La(+) and La(2+). For C2H2 and C2H4, all three metal ions insert into the C-C pi bond, making a three-membered ring. The optimal structures for the MC3H6(+) ions all involve rearrangement to make a four-membered ring. The strength of the metal-ligand bond for the singly charged ions follows the order La greater than Sc equal to about Y. In contrast, the bonds involving the dipositive ions are electrostatic, so that the binding energy increases as the size of the ion decreases, leading to the trend Sc greater than Y greater than La.
Bauschlicher, Charles W., Jr.↗
Theoretical study of the hyperfine parameters of OH
In the present study of the hyperfine parameters of O-17H as a function of the one- and n-particle spaces, all of the parameters except oxygen's spin density, b sub F(O), are sufficiently easily tractable to allow concentration on the computational requirements for accurate determination of b sub F(O). Full configuration-interaction (FCI) calculations in six Gaussian basis sets yield unambiguous results for (1) the effect of uncontracting the O s and p basis sets; (2) that of adding diffuse s and p functions; and (3) that of adding polarization functions to O. The size-extensive modified coupled-pair functional method yields b sub F values which are in fair agreement with FCI results.
Chong, Delano P.↗
Theoretical study of the C-H bond dissociation energies of CH4, C2H2, C2H4, and H2C2O
The successive C-H bond dissociation energies of CH4, C2H2, C2H4, and H2C2O (ketene) are determined using large-basis sets and a high level of correlation treatment. For CH4, C2H2, and C2H4 the computed values are in excellent agreement with experiment. Using these results, the values 107.9 + or - 2.0 and 96.7 + or - 2.0 kcal/mol are recommended for the C-H bond dissociation energies of H2C2O and HC2O, respectively.
Bauschlicher, Charles W., Jr.↗
An ab initio study of Fe(CO)n, n = 1,5, and Cr(CO)6
Ab initio calculations have been performed for Cr(CO)6 and Fe(CO)n, n = 1,5. Basis sets of better than double zeta quality are used, and correlation is included using the modified coupler-pair functional method. The computed geometries and force constants are in reasonable agreement with experiment. The sequential bond dissociation energies of CO from Fe(CO)5 are estimated to be: 39, 31, 25, 22, and greater than 5 kcal/mol. It is noted that the first bond dissociation energy is relative to the singlet ground state of Fe(CO)5 and the lowest singlet state of Fe(CO)4, whereas the second is relative to the ground triplet states of Fe(CO)4 and Fe(CO)3. In addition, the binding energy for Fe-CO would be modified to 18 kcal/mol if dissociation occurred to the Fe(5F) excited state asymptote. The CO binding energies for Fe and Cr are found to be in poorer agreement with experiment than those found in a previous study on Ni(CO)4. The origins of this difference are discussed.
Barnes, Leslie A.↗
The binding energies of Cu(+)-(H2O)n and Cu(+)-(NH3)n (n = 1-4)
The successive binding energies of up to four H2O and NH3 ligands to Cu(+) are computed at the self-consistent-field and modified coupled-pair functional levels. The most stable structures are those where all ligands are equivalent. Replacing Cu(+) by a point charge gives binding energies that are in good agreement with ab initio and experimental results, and is consistent with bonding that is largely charge dipole in nature. About two-thirds of the large reduction in ligand binding energy between the second and third ligand is due to ligand-ligand repulsion, while one-third is due to increased metal-ligand repulsion resulting from a loss of sd-sigma hybridization. The first and second ligand binding energies increase substantially at the correlated level due to an improved description of sd-sigma hybridization.
Bauschlicher, Charles W., Jr.↗