Engineering topics

Berdahl, M.

Publications and source records attributed to Berdahl, M..

5 records

NASA NTRS1983

Application of fluidics to instrumentation in hostile environments

This paper discusses the use of fluidic devices for measurement and control in the presence of hostile environments. Various applications are presented together with possible solutions by the use of fluidics. Several fluidic devices, components and circuits are described which may be adapted to fluidic measurement and control of processes where other methods fail or become extremely difficult or damaging to the instrumentation. Devices and techniques described include a description of a capillary temperature probe including both probe and circuit designs, and several possible techniques which may be used in the design and testing of fluidic devices.

Walsh, J.↗

NASA NTRS1982

Surface measurement system development

The development of an optical system designed to satisfy the requirements of early deployable concepts such as the LMSC offset wrap rib antenna is reported. The system is relatively lightweight, will measure distance to several targets, and provide data in engineering units in real time. Accuracy of measurements is such that use of the system will permit evaluation of surface quality of large parabolic antenna dishes. Operation of the system was conceptually proven.

Berdahl, M.↗

NASA NTRS1981

JPL self-pulsed laser surface measurement system development

Distances from a fixed reference or scan postion to several locations on the surface of an antenna reflector can be measured by using a self pulsed laser ranging system. Processing the information thus obtained is used to define the shape of the surface upon which antenna operational efficiency is directly dependent. Operation of the system consists of initiating a pulse from the laser emitter which is pointed at the scan mirror. The emitted pulse strikes the scan mirror, is reflected and sent to one of several targets on the surface of the antenna. Upon reflection from the target, the pulse returns to a detector via the scan mirror. The detected pulse is amplified and used to trigger the next emitted pulse. After the first pulse is emitted, received and used to trigger another pulse the process becomes repetitive with a repitition rate uniquely determined by the distance traveled to the target and back. A measure of the repetition rate or frequency thus created provides the means required for determining range since the total distance traveled is inversely proportional to the frequency.

Berdahl, M.↗

NASA NTRS1980

JPL self pulsed laser surface measurement system development

The use of a self pulsed laser system for accurately describing the surface shape of large space deployed antenna structures was evaluated. Tests with a breadboard system verified functional operation with short time resolution on the order of .2 mm, nonambiguous ranging, and a maximum range capability on the order of 150 m. The projected capability of the system is resolution of less than .1 mm over a reasonable time period and a range extension to over 300 m.

Berdahl, M.↗

NASA NTRS1979

A self pulsed laser ranging system under development at 'JPL'

The performance of large space deployable antenna reflectors to be used for broad-based communications systems is largely dependent on the accuracy with which the surface figure can be constructed and maintained. The paper examines various surface distortion tolerance and measurement requirements for various classes of communication antennas. Several surface measuring methods are described including a self-pulsed laser ranging system.

Berdahl, M.↗