Search NASA⌕ Search

Engineering topics

Boswell, Ray

Publications and source records attributed to Boswell, Ray.

At least 37 records · Page 2

Numerical Simulations of Gas Production from Gas Hydrate Reservoirs at the Prudhoe Bay Unit 7-11-12 Pad on Alaska North Slope

In December 2018, a partnership between the U.S. Department of Energy National Energy Technology Laboratory (DOE NETL), the Japan Oil, Gas and Metals National Corporation (JOGMEC), and the U.S. Geological Survey (USGS) successfully drilled and logged the Hydrate-01 Stratigraphic Test Well (STW) in the greater Prudhoe Bay oil field on Alaska North Slope. The logging-while-drilling (LWD) data confirmed the presence of gas hydrate-bearing reservoirs within two sand reservoirs (Unit B and Unit D) that are suitable targets for future testing. The interpreted log data and core sample measurements were used to create reservoir models for the Prudhoe Bay Unit (PBU) Kuparuk 7-11-12 Site. The models combine both gas hydrate-bearing sections in Unit B and Unit D together with the intermediate Unit C and over- and underburden sands and shales. The vertical heterogeneity in porosity, gas hydrate saturation, and permeability distributions for reservoir and non-reservoir units was implemented using fine mesh discretization. The depressurization method was applied to Unit B to induce gas hydrate destabilization at constant bottom hole pressure (BHP) values. The results of the numerical simulations support the development of production scenarios, well design, surface facilities, and field test procedures with the main goal to perform efficient and safe scientific production testing. Project results contribute to the knowledge base of permafrost-associated gas hydrate accumulations as a future energy source.

Myshakin, Evgeniy↗

India National Gas Hydrate Program Expedition 02 Summary of Scientific Results: Numerical Simulation of Reservoir Response to Depressurization

The India National Gas Hydrate Program Expedition 02 (NGHP-02) discovered gas hydrate at high saturation in sand reservoirs at several sites in the deepwater Bay of Bengal. To assess the potential response of those deposits to scientific depressurization experiments, comprehensive geologic models were constructed to enable numerical simulation for two sites. Both sites (NGHP-02-09 and NGHP-02-16) feature thick sequences of thinly-interbedded reservoir and non-reservoir facies at sub-seafloor depths less than 300m and sub-sea depths of 2400m or more. These settings pose significant challenges to current modeling capabilities. First, the thinly-interbedded reservoir architecture complicates the determination of basic reservoir parameters from both log and core data due to measurement resolution issues. Secondly, the fine scale variation in sediment properties imparts great contrasts in key parameters over very short distances, creating high gradients at multiple scales and varying orientations that necessitate careful design of high-definition simulation grids. Thirdly, the deposits include internal sources of water, as well as a range of complex boundary conditions, including variable permeability within the overlying mud-rich “seals,” that complicate reservoir depressurization. Lastly, because of the unique combination of great water depth and relatively shallow sub-seafloor depth: models designed to maximize the dissociation rate impose large pressure drawdowns on relatively low-strength sediments. This condition renders the proper evaluation and integration of the geomechanical response to hydrate dissociation critical. In this report, we review the history of gas hydrate reservoir simulation, discuss methods for creating geologic input models, and summarize the key findings and implications of the collaborative NGHP-02 numerical simulation effort. Together, the studies confirm the viability of the modeled accumulations for scientific testing and identify key challenges related to the selection of specific test sites and the design of test wells.

Boswell, Ray↗

India National Gas Hydrate Program Expedition 02 Summary of Scientific Results: Gas Hydrate Systems Along the Eastern Continental Margin of India

The India National Gas Hydrate Program Expedition 02 (NGHP-02) discovered gas hydrate at high saturation in sand reservoirs at several sites in the deepwater Bay of Bengal. To assess the potential response of those deposits to scientific depressurization experiments, comprehensive geologic models were constructed to enable numerical simulation for two sites. Both sites (NGHP-02-09 and NGHP-02-16) feature thick sequences of thinly-interbedded reservoir and non-reservoir facies at sub-seafloor depths less than 300m and sub-sea depths of 2400m or more. These settings pose significant challenges to current modeling capabilities. First, the thinly-interbedded reservoir architecture complicates the determination of basic reservoir parameters from both log and core data due to measurement resolution issues. Secondly, the fine scale variation in sediment properties imparts great contrasts in key parameters over very short distances, creating high gradients at multiple scales and varying orientations that necessitate careful design of high-definition simulation grids. Thirdly, the deposits include internal sources of water, as well as a range of complex boundary conditions, including variable permeability within the overlying mud-rich “seals,” that complicate reservoir depressurization. Lastly, because of the unique combination of great water depth and relatively shallow sub-seafloor depth: models designed to maximize the dissociation rate impose large pressure drawdowns on relatively low-strength sediments. This condition renders the proper evaluation and integration of the geomechanical response to hydrate dissociation critical. In this report, we review the history of gas hydrate reservoir simulation, discuss methods for creating geologic input models, and summarize the key findings and implications of the collaborative NGHP-02 numerical simulation effort. Together, the studies confirm the viability of the modeled accumulations for scientific testing and identify key challenges related to the selection of specific test sites and the design of test wells.

Collett, Tim↗

Refined Lithostratigraphy of Upper and Middle Devonian Shales in West Virginia

The evolution of the formal lithostratigraphy for the Middle and Upper Devonian strata in the central Appalachian Basin has been complex. The original terminology (Chemung, Portage, Marcellus, Catskill, and others) was assigned in the latter 19th century. However, by the 1930s, the realization that these units changed in nature dramatically when traced laterally resulted in a crisis in stratigraphy that forced the differentiation of chronostratigraphy from lithostratigraphy. Further, the sheer size of the basin creates challenges, as stratigraphic terminology defined by examination along the outcrop belts at the basin margins is difficult to extend into the subsurface due to the distances involved, the different nature of outcrop and subsurface data, the different perspective of workers attempting to extend units either from the north and west or from the east, and the complex facies changes within the strata. As a result, the facies architecture and associated lithostratigraphic nomenclature for many Middle and Upper Devonian units remained unsettled, particularly in the basin center.

Boswell, Ray↗

Refined Lithostratigraphy of Middle and Upper Devonian shales in West Virginia

The evolution of the formal lithostratigraphy for the Middle and Upper Devonian strata in the central Appalachian basin has been complex. The original terminology (Chemung, Portage, Marcellus, Catskill, and others) was assigned late in the 19th century. However, by the 1930s, the realization that these units changed in nature dramatically when traced laterally resulted in a crisis in stratigraphy that forced the differentiation of chronostratigraphy from lithostratigraphy. Further, the sheer size of the basin creates challenges, as stratigraphic terminology defined by examination along the outcrop belts at the basin margins is difficult to extend into the subsurface due to the distances involved, the different nature of outcrop and subsurface data, the different perspective of workers attempting to extend units either from the north and west or from the east, and the complex facies changes within the strata. As a result, the facies architecture and associated lithostratigraphic nomenclature for many Middle and Upper Devonian units remained unsettled, particularly in the basin center. This study uses log data from nearly 400 wells from West Virginia to produce detailed maps of the economically important, organic-rich facies and identifies various associated vertical and lateral lithostratigraphic unit boundaries. The study focuses on the Middle Devonian Hamilton Group and its constituent Marcellus and Mahantango formations. Within the Marcellus, a lower Union Springs Member, a middle Cherry Valley Member, and an upper Oatka Creek Member are defined within northeastern West Virginia only. Throughout the rest of the subsurface of the State, the Marcellus has no distinguishable members. In the Upper Devonian, the occurrence and limits of the Harrell Shale (and its basal Burket Shale Member), and its westward lateral transition into the largely-correlative Genesee Formation (with basal Geneseo Shale and upper West River Shale members) are mapped. Maps also detail the position at which the Sonyea Formation (with basal Middlesex Shale and upper Cashaqua Shale members), West Falls Formation (with basal Rhinestreet Shale and upper Angola Shale members), Java Formation (undifferentiated), and lower part of the Huron Member of the Ohio Shale transition eastward into age-equivalent strata of the Brallier Formation.

Boswell, Ray↗

Development of Deepwater Natural Gas Hydrates

Deepwater natural gas hydrate resources potentially exceed all other conventional and non-conventional hydrocarbon resources on a world-wide basis. However, before these offshore gas hydrate resources can be classified as reserves, it must be demonstrated that gas hydrates can be produced under conditions thatmake economic sense. The purpose of this paper is to provide an overview of the technical issues that will challenge the development of deepwater natural gas hydrates.

Hancock, Steven↗

An Investigation of Hydrate Formation in Unsaturated Sediments Using X-Ray Computed Tomography

Physical properties of hydrate–bearing sediments are often correlated with hydrate saturation with little or no information on hydrate distribution uniformity in the specimens. This study focuses on water redistribution and sediment skeleton shift depending on various hydrate formation conditions in unsaturated systems, as well as on the resulting hydrate distribution patterns. Using X–ray computed tomography, we investigate the factors such as fines content and the pressure–temperature path on mass migration during carbon dioxide hydrate formation. The experiments show water migration, preferential hydrate formation toward the core periphery, localized patchy hydrate distribution, and sediment particle movement toward the core center. Sediment particle movement can be impeded in densely packed specimens. Furthermore, the overall mass migration due to hydrate formation can be significantly suppressed by adding 5% by mass of kaolinite. Hydrate formation initiated by pressurization and then cooling causes less mass migration than the cases where hydrate is formed using cooling followed by pressurization or pressurizing frozen cores followed by heating methods. Freezing can induce water migration and particle pushing in a similar manner as hydrate formation. Image analyses show that the pressure–temperature path and the rates of heat transfer during hydrate nucleation and growth govern the uniformity of hydrate distribution in sediments.

58 GEOSCIENCES↗

Abstract for CRADA between the Japan Oil, Gas, and Metals National Corporation (JOGMEC) and NETL (AGMT-0671)

The US Department of Energy’s National Energy Technology Laboratory (NETL) and the Japan Oil, Gas, and Metals National Corporation (JOGMEC) have long-established gas hydrate R&D programs and both have identified an extended duration scientific field test of depressurization as a key requirement in advancing critical science and technology development objectives. Both Parties recognize that the Alaska North Slope (“ANS”) is the most feasible location on Earth to conduct such a test and that a proven ANS Operator should be engaged to carry out the desired scientific drilling and testing field programs in full compliance with all regulations. Given the unpredictable nature of field programs conducted in harsh operating environments, the parties have executed this CRADA to clearly establish a basic framework of the project goals, and to articulate roles, responsibilities, and decision-making protocols prior to the initiation of a field program. Therefore, this CRADA establishes a project “Steering Committee” to guide major project decision points and allocation of resources; an “R&D Committee” to jointly develop field program technical and scientific plans designed to achieve program objectives; and “Field Representatives” to enable effective, real-time, and collaborative decision making during field programs.

03 NATURAL GAS↗

Evaluation of the performance of the oceanic hydrate accumulation at site NGHP-02-09 in the Krishna-Godavari Basin during a production test and during single and multi-well production scenarios

The objective of this study is to quantify, by means of numerical simulation, the response of the complex system of gas hydrate accumulations at Site NGHP-02-09, Krishna-Godavari Basin, Indian Ocean, to different production conditions, and to determine the technical feasibility of gas production through depressurization-induced dissociation. The study assesses the suitability of the site for a long-term production test involving a single vertical well, and the long-term potential of the deposit under full-field production using a system of multiple vertical wells. We simulate gas and water flow, estimate the production performance of the accumulation and separately investigate the corresponding geomechanical response of the system. Results indicate that production from Site NGHP-02-09 under the conditions of a long-term field test involving a single vertical well is technically feasible and can yield high gas production rates. However, an inability to fully isolate the water bearing zones results in production that is largely from dissolved gas rather than hydrate dissociation and is thus burdened by excessive water production. Given the estimated physical properties of the reservoir system, Site NGHP-02-09 does not appear to be a promising location for a single-well field test of gas production, but may be a promising production target for full-field production operations using a multi-well system in which exterior wells can mitigate water inflows to allow interior wells to more effectively depressurize the formation and capture methane from gas hydrate dissociation. Geomechanical issues need to be carefully considered as significant displacements are possible, which can be challenging to well construction and stability.

58 GEOSCIENCES↗

Numerical simulations of sand migration during gas production in hydrate-bearing sands interbedded with thin mud layers at site NGHP-02-16

The geomechanical behavior of gas hydrate-bearing sands during gas production is complex, involving changes in hydrate-dependent mechanical characteristics and also redistribution of stresses carried by the hydrate. When an interbedded mud layer is present, the complex response of the hydrate-bearing sediments is more pronounced because hydrate dissociation tends to occur preferentially in the sands adjacent to the hydrate-free mud layer, which can act as a heat source. This leads to non-uniform sediment deformation and potentially to shearing deformation along the sand/mud layers. In addition, since the hydrate-bearing sand permeability becomes far greater than the mud permeability with hydrate dissociation, a greater hydraulic gradient may exist along the interface between the sand/mud layers. These two behaviors may contribute to sand migration and thus a thorough study on the effect of a thin interbedded mud layer on the extent of sand migration is necessary. This paper presents numerical sand migration modeling of sand/mud interbedded hydrate-bearing sediments found at Site NGHP-02-16, one of 25 sites drilled as a part of National Gas Hydrate Program Expedition 02 (NGHP-02) in the offshore of India, subjected to depressurization. For a comparison and better understanding, simulation of homogeneous hydrate-bearing sediments is also conducted. It is found that greater sand migration occurs when the interbedded mud layer is present because of greater shearing deformation and greater pressure gradients at sand-mud interface.

58 GEOSCIENCES↗

Numerical simulations of depressurization-induced gas production from an interbedded turbidite gas hydrate-bearing sedimentary section in the offshore India: Site NGHP-02-16 (Area-B)

The recent National Gas Hydrate Program Expedition 02 (NGHP-02) identified the existence of gas hydrate-bearing sand reservoirs at a number of sites in the offshore of India including Site NGHP-02-16 in Area-B of the Krishna-Godavari Basin. The architecture of that gas hydrate accumulation is characterized by thin, gas hydrate-bearing, high quality sand layers interbedded with mud layers within a turbidite sedimentary interval. The lowest gas hydrate-bearing layer contacting a thinly-interbedded saline aquifer designates the base of the gas hydrate stability zone (BGHSZ). The proximity of the BGHSZ and the average temperature around 20 °C make the reservoir a favorable target for hydrate destabilization by means of the depressurization method. The results of the reservoir simulations indicate high gas production potential from this marine gas hydrate deposit with manageable concomitant water production using a well completion design that hydraulically isolates layers with water-saturated sands. Using a detailed geological input model, the predicted cumulative gas rates reach ~3.1 × 10 4 m 3 /day (~1.1 MMscf/day) after 90 days of continuous depressurization and demonstrate sustained production rates ~3.0 × 10 4 m 3 /day (~1.0 MMscf/day) after 5 years of production. The interbedded nature of this gas hydrate occurrence promotes the development of horizontal dissociation interfaces between gas hydrate-bearing sand and mud layers. As a result, non-uniform gas production along the horizontal interfaces becomes a primary determinant of reservoir performance. Simulation cases have been executed to determine the impact of the uncertainty in in situ reservoir permeability and the manner in which intrinsic permeability dynamically changes during dissociation in response to the imposed effective stress increase. Here, the cases based on low initial effective permeability and high sensitivity of compaction to stress result in the least favorable production predictions.

58 GEOSCIENCES↗

Assessing the geomechanical stability of interbedded hydrate-bearing sediments under gas production by depressurization at NGHP-02 Site 16

Establishing the geomechanical stability of marine sediments in the vicinity of a production well is one of the key design considerations in planning offshore gas production from marine hydrate reservoirs. This work presents an assessment of the sediment stability at India's National Gas Hydrate Program, Expedition 2 (NGHP-02) Site 16 Area B offshore eastern India, for which gas production is to be carried out by depressurization. One important feature of the study is that extensive calibration of constitutive model parameters has been conducted based on laboratory test data from pressured core samples. From analysis perspective, the site is challenging because the hydrate reservoir consists of thin layers of hydrate-bearing sands interbedded with mud. Moreover, depressurization at the depth of a reservoir more than 2750 m below sea surface will lead to a pore pressure drop, and accordingly an effective confining stress increase as high as 25 MPa. In dealing with thin interbedded hydrate-bearing strata, meshing requirements for flow and geomechanical analysis are quite different from those for reservoirs with thicker massive layers, An axisymmetric model and one-way coupling simulations were thus adopted for this study, in which the geomechanical study utilizes pore pressure and hydrate saturation output from the flow study, but the flow study does not takes the porosity changes from the geomechanical analysis. Instead, the reduction of porosity due to sediment deformation in the flow study is based on a pressure-dependent pore compressibility relationship derived from geomechanical modeling. The rationality is validated through back computing the pore compressibility from the geomechanical deformation results. Finally, the study shows that large compression in the reservoir will result in movement of the sediments from above and below, as well as laterally in smaller magnitudes; and the sediment is deemed stable during the gas production period.

58 GEOSCIENCES↗

UT-GOM2-1 Hydrate Pressure Coring Expedition Summary (Chapter 1. Expedition Summary)

The UT-GOM2-1 Hydrate Pressure Coring Expedition drilled two wells in Green Canyon Block 955 (GC 955) in the deepwater Gulf of Mexico: Hole GC 955 H002 (H002) and Hole GC 955 H005 (H005). 21 10 ft (3.05 m) pressure cores were attempted in and near the methane hydrate reservoir. In the first hole, H002, 1 of the 8 cores were recovered under pressure and there was 34% recovery of sediment (both pressurized and depressurized). In the second hole, H005, 12 of the 13 cores were recovered under pressure and there was 72% recovery of sediment. The pressure cores were imaged and logged under pressure. Samples were quantitatively degassed either on-board or on-shore to determine the hydrate concentration and the gas composition. Pore water analyses were performed on depressurized samples, and sediment samples were collected to enable characterization of the microbial community. 21 3.3 ft (1 m) vessels containing pressure core sections were returned to the University of Texas for storage, distribution, and further analysis. These cores will provide a foundation for scientific exploration by the greater hydrate research community. This is the initial expedition summary (preliminary expedition report).

03 NATURAL GAS↗

UT-GOM2-1 Hydrate Pressure Coring Expedition (Chapter 2. Expedition Methods)

This chapter documents the procedures and methods employed by the UT-GOM2-1 Expedition on the Helix D/V Q-4000 vessel; dockside at the demobilization dock, InterMoor, Port Fourchon, LA; and during subsequent limited shore-based analyses. Dockside analyses reported here include continued pressure core logging, curation, quantitative degassing, gas analysis, and mud lab activities. The limited shore-based analyses reported here include initial core scanning and core description at Ohio State University, smear slide and visual descriptions at the University of New Hampshire, and geochemical analyses at the University of Washington. All work discussed was completed between June and September 2017. Future shore-based analyses of UT GOM2-01 results will be described in separate individual publications. This expedition report is modeled after the reporting style of the International Ocean Discovery Program (IODP). The methods used during the expedition were designed to conform to IODP protocols as much as possible.

03 NATURAL GAS↗

UT-GOM2-1 Hydrate Pressure Coring Expedition: Chapter 3. Hole GC 955 H002

This report describes the operations, sample collection and handling, initial analyses, and preliminary interpretations developed by the UT-GOM2-1 Science Party for Hole GC 955 H002 (H002). This chapter describes the results of H002 pressure coring, physical property analysis, quantitative degassing, lithostratigraphic analysis, geochemical analysis, and wireline logging. All methods are described in Chapter 2 Expedition Methods.

03 NATURAL GAS↗

UT-GOM2-1: Chapter 4. Hole GC 955 H005

This report describes the operations, sample collection and handling, initial analyses, and preliminary interpretations developed by the UT-GOM2-1 Science Party for Hole GC 955 H005 (H005). This chapter describes H005 pressure coring, physical property analysis, quantitative degassing, lithostratigraphic analysis, geochemical analysis, and wireline logging. All methods are described in Chapter 2 Expedition Methods

03 NATURAL GAS↗

Key aspects of numerical analysis of gas hydrate reservoir performance: Alaska North Slope Prudhoe Bay Unit “L-Pad” hydrate accumulation

In previous work, we reported the development of the 3D geostatistical hydrate reservoir model of "L-Pad" (Myshakin et al., 2016). Here, gas production sensitivity on key reservoir parameters are studied. Hydraulic communication with an aquifer and optimal depressurization strategies are subjects of investigation. Uncertainty in initial in situ permeability within 0.1–10 mD range leads to 2.0 × 10 8 –3.5 × 10 8 ST m 3 of gas produced over 10 years. Accounting for reservoir quality and irreducible water saturation leads to noticeable change in productivity. Lastly, sequential depressurization of hydrate-bearing units was found to be more attractive versus simultaneous depressurization.

03 NATURAL GAS↗