Search NASA⌕ Search

Engineering topics

Breault, Ronald

Publications and source records attributed to Breault, Ronald.

At least 19 records

Design, Fabrication, and testing of Direct Air Capture Sorbent modules to increase understanding of trade-offs in pressure drop and capture efficiency

Conference presentation for the work entitled “Design, Fabrication, and testing of Direct Air Capture Sorbent modules to increase understanding of trade-offs in pressure drop and capture efficiency”. In recent years, there has been a growing interest in Direct Air Capture (DAC) of CO2. This technology is gaining attention as a method to enhance the reduction of atmospheric greenhouse gases (GHGs), particularly when used alongside other decarbonization strategies. The route for efficient and net carbon negative DAC is challenging because CO2 in the atmosphere is highly diluted (~400ppm). This work, utilizing 3D printing capabilities for rapid prototyping, presents application-based findings on the design, fabrication, and testing of DAC module form factors that house solid sorbents. The work leverages an experimental rig that can achieve air throughput and velocities approaching that which are anticipated for commercial scales. The tradeoffs of pressure drop, footprint and capture efficiency are discussed for different orientations of a NETL patented sorbent material.

Riley, Jarrett↗

Development of 250 kW Ammonia and Hydrogen Industrial Burner Test Facility at the National Energy Technology Laboratory

In an effort to investigate the viability of ammonia and hydrogen as fuels in the industrial heating sector, the Department of Energy’s National Energy Technology Laboratory is developing a 250 kW burner test facility. The pursuit of a decarbonized industrial heating sector requires innovative approaches to convert existing assets to alternative fuels while maintaining adequate radiative heat transfer and limiting NOx. This new capability will leverage NETL’s experience and prior investments in ammonia and hydrogen combustion, to advance atmospheric pressure industrial combustion systems for industries such as cement kilns and glass factories. The intention in coming years is to collaborate with burner manufacturers and heavy industry partners to study, develop, and validate strategies for converting existing hardware from carbon-based fuels to next-generation clean ammonia and hydrogen technologies.

May, Kristyn Johnson↗

The Advanced Scale Up Reactor Experiment (ASURE) Facility: A Testbed for Advancing the Art of Biomass and Waste Co-Gasification Systems.

This paper was an executive summary for an oral presentation to be included in the conference proceedings of the 2024 Clearwater Clean Energy conference. It includes a brief discussion of the plans to construct a small pilot-scale co-gasification test facility known as the Advanced Scale Up Reactor Experiment (ASURE) Facility at NETL’s Morgantown, WV site in support of FECM’s goals for advancing biomass and waste co-gasification systems for carbon-neutral hydrogen production.

Rowan, Steven↗

Fluidization Regime Mapping Analysis for 200 μm Glass Beads in a Circulating Fluidized Bed Riser

This paper was an executive summary for an oral presentation to be included in the conference proceedings of the 2024 Clearwater Clean Energy Conference. It includes a brief discussion of a recently developed non-dimensional map for scaling circulating fluidized bed risers using velocity and solids circulation rate ratios. Data is presented for a set of experiments conducted in NETL’s 12-inch cold flow circulating fluidized bed (CFCFB) riser with 200 micron diameter glass beads, showing a strong dependance between solids volume fraction profiles and the solids circulation rate ratio.

Rowan, Steven↗

The Advanced Scale Up Reactor Experiment (ASURE) Facility: A Testbed for Advancing the Art of Biomass and Waste Co-Gasification Systems

Powerpoint slides for an oral presentation at the 2024 Clearwater Clean Energy conference. It includes a brief discussion of the plans to construct a small pilot-scale co-gasification test facility known as the Advanced Scale Up Reactor Experiment (ASURE) Facility at NETL’s Morgantown, WV site in support of FECM’s goals for advancing biomass and waste co-gasification systems for carbon-neutral hydrogen production.

Rowan, Steven↗

Fluidization Regime Mapping Analysis for 200 μm Glass Beads in a Circulating Fluidized Bed Riser

Powerpoint slides for an oral presentation at the 2024 Clearwater Clean Energy Conference. It includes a brief discussion of a recently developed non-dimensional map for scaling circulating fluidized bed risers using velocity and solids circulation rate ratios. Data is presented for a set of experiments conducted in NETL’s 12-inch cold flow circulating fluidized bed (CFCFB) riser with 200 micron diameter glass beads, showing a strong dependance between solids volume fraction profiles and the solids circulation rate ratio.

Rowan, Steven↗

Maintaining Microstructure – The Path to Successful Technology Maturation in Fluidized Systems

Scaling circulating fluidized bed risers has been a point of contention for nearly a century. There have been numerous attempts to define various methodologies. These have all fallen short of providing a robust approach, primarily due to a lack of maintaining microstructure dynamics – a key factor in maintain interphase heat and mass transfer. Recent work by the author put forward an approach based up maintaining dynamic similarity at different scales by ensuring that the microstructure remained similar by maintaining statistical and chaotic parameters across the scale. That work relied on a dimensionless regime map in which the x-axis was defined by the ratio of the solids flux to the saturation carrying capacity. This latter property was only good within the range of the data and it became evident that extrapolation beyond the limits of the data could induce unrealistic conditions. Therefore, literature was reviewed to develop a better correlation for the saturation carrying capacity. In doing so, a critical diameter concept was developed and applied to the correlations for both Geldart Group A and B materials. The critical diameter for Geldart Group A and B materials is 0.2 m and 0.3 m, respectively. The paper then gives examples on how to use the scaling approach to maintain dynamic similarity across the scales.<br>

Breault, Ronald↗

Multiphysics simulation of supercritical CO 2 gasification for hydrogen production

A bench-scale supercritical CO 2 gasifier is being considered by the U.S. Department of Energy’s National Energy Technology Laboratory (NETL). A reacting computational fluid dynamics (CFD) model was developed using ANSYS/Fluent in order to investigate the impact of various operating parameters on syngas composition. The model was validated using available data in the literature. Simulations were conducted over a range of coal-slurry loadings, reaction temperatures, system pressures, and oxygen mass flowrates with the goal of optimizing hydrogen production for the considered reactor. The results from the simulations identified a positive correlation between slurry loading and hydrogen production, while reactor temperature and pressure had a limited impact on H 2 production at the conditions of interest. Additionally, the simulations indicated that oxygen mass flowrate has less of an impact on hydrogen production at higher slurry loadings.

08 HYDROGEN↗