Search NASA⌕ Search

Engineering topics

Broido, David

Publications and source records attributed to Broido, David.

At least 19 records

Physical origins of the varying performance and unusual transport behaviors among thermoelectric A Mg 2 Sb 2 materials ( A = Ca, Sr, Sm, Yb, and Mg)

Contrary to the similar thermoelectric performance among both AZn 2 Sb 2 and AMg 2 Bi 2 compounds, their isostructural counterparts, AMg 2 Sb 2 , can exhibit thermoelectric figure of merit values that vary by orders of magnitude with different A elements. Here, we reveal physical origins accounting for the significantly differing performance among AMg 2 Sb 2 -based compounds (A = Ca, Sr, Sm, Yb, and Mg) through comprehensive analyses, where it is shown that the dispar- ities in performance at the macroscale essentially originate from the widely varying activation energies that equal amounts of dopant can induce. Meanwhile, a few unusual transport behaviors regarding electrical conductivity, carrier concentration, or lattice thermal con- ductivity among these compounds have been identified, and we also present their rationales in depth. Furthermore, this mechanism-focused study can not only promote further understanding of the complex transport behaviors in condensed matter but be instrumental in rationally tun- ing the physical properties of materials as well.

36 MATERIALS SCIENCE↗

TDEP: Temperature Dependent Effective Potentials

The Temperature Dependent Effective Potential (TDEP) method is a versatile and efficient approach to include temperature in ab initio materials simulations based on phonon theory. TDEP can be used to describe thermodynamic properties in classical and quantum ensembles, and several response properties ranging from thermal transport to Neutron and Raman spectroscopy. A stable and fast reference implementation is given in the software package of the same name described here. The underlying theoretical framework and foundation is briefly sketched with an emphasis on discerning the conceptual difference between bare and effective phonon theory, in both self-consistent and non-self-consistent formulations. References to numerous applications and more in-depth discussions of the theory are given.

36 MATERIALS SCIENCE↗

A thermodynamic explanation of the Invar effect

The anomalously low thermal expansion of Fe–Ni Invar has long been associated with magnetism, but to date, the microscopic underpinnings of the Invar behaviour have eluded both theory and experiment. Here we present nuclear resonant X-ray scattering measurements of the phonon and magnetic entropies under pressure. By applying a thermodynamic Maxwell relation to these data, we obtain the separate phonon and magnetic contributions to thermal expansion. We find that the Invar behaviour stems from a competition between phonons and spins. In particular, the phonon contribution to thermal expansion cancels the magnetic contribution over the 0–3 GPa pressure range of Invar behaviour. At pressures above 3 GPa, the cancellation is lost, but our analysis reproduces the positive thermal expansion measured separately by synchrotron X-ray diffractometry. Ab initio calculations informed by experimental data show that spin–phonon interactions improve the accuracy of this cancellation over the range of Invar behaviour. Further, spin–phonon interactions also explain how different phonon modes have different energy shifts with pressure.

36 MATERIALS SCIENCE↗

High-frequency phonons drive large phonon-drag thermopower in semiconductors at high carrier density

It has been well established that (i) the thermopower of semiconductors can be enhanced through a phe- nomenon known as the drag effect, and (ii) the drag enhancement involves only low-frequency acoustic phonons and benefits from low electron densities and low temperatures. Using first-principles calculations we show that large drag enhancements to the thermopower are possible at high carrier density even at room temperature and arise from high-frequency acoustic phonons. A fascinating example is cubic boron arsenide (BAs) for which the calculated room temperature drag enhancement of the thermopower exceeds an order of magnitude at a high hole density of 10 21 cm –3 . This remarkable behavior stems from the simultaneously weak phonon-phonon and phonon-hole scattering of the high-frequency phonons in BAs that become drag active at high carrier densities through electron-phonon interactions. Furthermore, this work advances our understanding of coupled electron-phonon nanoscale transport and introduces an unexpected paradigm for achieving large thermopowers.

36 MATERIALS SCIENCE↗

Visualization of bulk and edge photocurrent flow in anisotropic Weyl semimetals

Materials that rectify light into current in their bulk are desired for optoelectronic applications. In Weyl semimetals that break inversion symmetry, bulk photocurrents may arise due to nonlinear optical processes that are enhanced near the Weyl nodes. However, the photoresponse of these materials is commonly studied by scanning photocurrent microscopy, which convolves the effects of photocurrent generation and collection. Here we directly image the photocurrent flow inside the type-II Weyl semimetals WTe 2 and TaIrTe 4 using high-sensitivity quantum magnetometry with nitrogen-vacancy centre spins. We elucidate a mechanism for bulk photocurrent generation, which we call the anisotropic photothermoelectric effect, where unequal thermopowers along different crystal axes drive intricate circulations of photocurrent around the photoexcitation. Using overlapping scanning photocurrent microscopy and magnetic imaging at the interior and edges of the sample, we visualize how the anisotropic photothermoelectric effect stimulates the long-range photocurrent collected in our WTe 2 and TaIrTe 4 devices through the Shockley–Ramo mechanism. Furthermore, our results highlight a widely relevant source of current flow and will inspire photodetectors that utilize bulk materials with thermoelectric anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theory of thermal properties of magnetic materials with unknown entropy

Theoretical approaches to study thermal properties of magnetic materials typically require accurate models of magnetic interactions in order to define the entropy. Here we introduce a complementary approach for examining thermal properties in magnetic systems where an accepted model for such interactions does not exist. In place of a specific model for magnetic interactions, the approach integrates measurements of temperature dependent magnetization of the studied material into a first principles computational scheme. The approach calculates system pressure from thermally disordered microstates that properly incorporate vibrational and spin subsystems at each temperature as well as the coupling between these subsystems. We apply the approach to calculate phonon modes and to investigate the anomalously low thermal expansion of the classical Invar alloy, Fe 0.65 Ni 0.35 . Here, the calculated phonon dispersions for Invar are in excellent agreement with measured data. The Invar thermal expansion is shown to remain small between 50 K and room temperature, consistent with the experimentally observed low thermal expansion value in this same temperature range. This anomalously small thermal expansion is directly connected to a small positive contribution from lattice thermal disorder that is nearly canceled by a large negative magnetic disorder contribution. By contrast, calculations for bcc Fe show a much larger thermal expansion, consistent with experiment, which is dominated by a large contribution from lattice thermal disorder that is reduced only slightly by a small negative contribution from that of magnetism. These findings give insights into the unusual nature of magnetism and spin-lattice coupling in Invar and Fe. In addition, they give promising preliminary support to the presented new methodology as a complementary way to investigate thermal properties of magnetic materials. The success achieved on Invar and Fe motivates future testing of the approach on other magnetic materials.

36 MATERIALS SCIENCE↗

The elphbolt ab initio solver for the coupled electron-phonon Boltzmann transport equations

elphbolt is a modern Fortran (2018 standard) code for efficiently solving the coupled electron–phonon Boltzmann transport equations from first principles. Using results from density functional and density functional perturbation theory as inputs, it can calculate the effect of the non-equilibrium phonons on the electronic transport (phonon drag) and non-equilibrium electrons on the phononic transport (electron drag) in a fully self-consistent manner and obeying the constraints mandated by thermodynamics. It can calculate the lattice, charge, and thermoelectric transport coefficients for the temperature gradient and electric fields, and the effect of the mutual electron–phonon drag on these transport properties. The code fully exploits the symmetries of the crystal and the transport-active window to allow the sampling of extremely fine electron and phonon wave vector meshes required for accurately capturing the drag phenomena. The corray feature of modern Fortran, which offers native and convenient support for parallelization, is utilized. The code is compact, readable, well-documented, and extensible by design.

electron drag↗

Non-monotonic pressure dependence of the thermal conductivity of boron arsenide

Recent experiments demonstrate that boron arsenide (BAs) is a showcase material to study the role of higher-order four-phonon interactions in affecting heat conduction in semiconductors. Here we use first-principles calculations to identify a phenomenon in BAs and a related material - boron antimonide, that has never been predicted or experimentally observed for any other material: competing responses of three-phonon and four-phonon interactions to pressure rise cause a non-monotonic pressure dependence of thermal conductivity, κ, which first increases similar to most materials and then decreases. The resulting peak in κ shows a strong temperature dependence from rapid strengthening of four-phonon interactions relative to three-phonon processes with temperature. Our results reveal pressure as a knob to tune the interplay between the competing phonon scattering mechanisms in BAs and similar compounds, and provide clear experimental guidelines for observation in a readily accessible measurement regime.

36 MATERIALS SCIENCE↗

Fermi Surface Nesting and Phonon Frequency Gap Drive Anomalous Thermal Transport

The lattice thermal conductivity, k L , of typical metallic and nonmetallic crystals decreases rapidly with increasing temperature because phonons interact more strongly with other phonons than they do with electrons. Using first principles calculations, we show that k L can become nearly independent of temperature in metals that have nested Fermi surfaces and large frequency gaps between acoustic and optic phonons. Then, the interactions between phonons and electrons become much stronger than the mutual interactions between phonons, giving the fundamentally different k L behavior. This striking trend is revealed here in the group V transition metal carbides, vanadium carbide, niobium carbide, and tantalum carbide, and it should also occur in several other metal compounds. As a result, this work gives insights into the physics of heat conduction in solids and identifies a new heat flow regime driven by the interplay between Fermi surfaces and phonon dispersions.

36 MATERIALS SCIENCE↗

Unified first-principles theory of thermal properties of insulators

The conventional first-principles theory for the thermal and thermodynamic properties of insulators is based on the perturbative treatment of the anharmonicity of crystal bonds. While this theory has been a successful predictive tool for strongly bonded solids such as diamond and silicon, here we show that it fails dramatically for strongly anharmonic (weakly bonded) materials, and that the conventional quasiparticle picture breaks down at relatively low temperatures. To address this failure, we present a unified first-principles theory of the thermodynamic and thermal properties of insulators that captures multiple thermal properties within the same framework across the full range of anharmonicity from strongly bonded to weakly bonded insulators. This theory features a new phonon renormalization approach derived from many-body physics that creates well-defined quasiparticles even at relatively high temperatures, and it accurately captures the effects of strongly anharmonic bonds on phonons and thermal transport. Using a prototypical strongly anharmonic material, sodium chloride (NaCl), as an example, we demonstrate that our new first-principles framework simultaneously captures the apparently contradictory experimental observations of large thermal expansion and low thermal conductivity of NaCl on the one hand, and anomalously weak temperature dependence of phonon modes on the other, while the conventional theory fails in all three cases. Here we demonstrate that four-phonon scattering due to higher-order anharmonicity significantly lowers the thermal conductivity of NaCl and is required for a proper comparison to experiment. Furthermore, we show that our renormalization framework, along with four-phonon scattering, also successfully predicts the measured phonon frequencies and thermal properties of a weakly anharmonic material, diamond, indicating universal applicability for thermal properties of insulators. Our work gives new insights into the physics of heat flow in solids, and presents a computationally efficient and rigorous framework that captures the thermal and thermodynamic properties of both weakly and strongly bonded insulators simultaneously.

36 MATERIALS SCIENCE↗

Discovery of ZrCoBi based half Heuslers with high thermoelectric conversion efficiency

Abstract Thermoelectric materials are capable of converting waste heat into electricity. The dimensionless figure-of-merit (ZT), as the critical measure for the material’s thermoelectric performance, plays a decisive role in the energy conversion efficiency. Half-Heusler materials, as one of the most promising candidates for thermoelectric power generation, have relatively low ZTs compared to other material systems. Here we report the discovery of p -type ZrCoBi-based half-Heuslers with a record-high ZT of ∼1.42 at 973 K and a high thermoelectric conversion efficiency of ∼9% at the temperature difference of ∼500 K. Such an outstanding thermoelectric performance originates from its unique band structure offering a high band degeneracy ( N v ) of 10 in conjunction with a low thermal conductivity benefiting from the low mean sound velocity ( v m ∼2800 m s −1 ). Our work demonstrates that ZrCoBi-based half-Heuslers are promising candidates for high-temperature thermoelectric power generation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phonon thermal transport in 2H, 4H and 6H silicon carbide from first principles

Here, silicon carbide (SiC) is a wide band gap semiconductor with a variety of industrial applications. Among its many useful properties is its high thermal conductivity, which makes it advantageous for thermal management applications. In this paper we present ab initio calculations of the in-plane and cross-plane thermal conductivities, κ in and κ out , of three common hexagonal polytypes of SiC: 2H, 4H and 6H. The phonon Boltzmann transport equation is solved iteratively using as input interatomic force constants determined from density functional theory. Both κ in and κ out decrease with increasing n in nH SiC because of additional low-lying optic phonon branches. These optic branches are characterized by low phonon group velocities, and they increase the phase space for phonon-phonon scattering of acoustic modes. Also, for all n, κ in is found to be larger than κ out in the temperature range considered. At electron concentrations present in experimental samples, scattering of phonons by electrons is shown to be negligible except well below room temperature where it can lead to a significant reduction of the lattice thermal conductivity. This work highlights the power of ab initio approaches in giving quantitative, predictive descriptions of thermal transport in materials. It helps explain the qualitative disagreement that exists among different sets of measured thermal conductivity data and provides information of the relative quality of samples from which measured data was obtained.

36 MATERIALS SCIENCE↗

The effect of shallow vs. deep level doping on the performance of thermoelectric materials

It is well known that the efficiency of a good thermoelectric material should be optimized with respect to doping concentration. However, much less attention has been paid to the optimization of the dopant’s energy level. Thermoelectric materials doped with shallow levels may experience a dramatic reduction in their figures of merit at high temperatures due to the excitation of minority carriers that reduces the Seebeck coefficient and increases bipolar heat conduction. Doping with deep level impurities can delay the excitation of minority carriers as it requires a higher temperature to ionize all dopants. We find through modeling that, depending on the material type and temperature range of operation, different impurity levels (shallow or deep) will be desired to optimize the efficiency of a thermoelectric material. For different materials, we further clarify where the most preferable position of the impurity level within the bandgap falls. In this work, our research provides insight on why different dopants often affect thermoelectric transport properties differently and directions in searching for the most appropriate dopants for a thermoelectric material in order to maximize the device efficiency.

36 MATERIALS SCIENCE↗

Achieving high power factor and output power density in p-type half-Heuslers Nb 1-x Ti x FeSb

Significance Thermoelectric technology can boost energy consumption efficiency by converting some of the waste heat into useful electricity. Heat-to-power conversion efficiency optimization is mainly achieved by decreasing the thermal conductivity in many materials. In comparison, there has been much less success in increasing the power factor. We report successful power factor enhancement by improving the carrier mobility. Our successful approach could suggest methods to improve the power factor in other materials. Using our approach, the highest power factor reaches ∼106 μW⋅cm −1 ⋅K −2 at room temperature. Such a high power factor further yields a record output power density in a single-leg device tested between 293 K and 868 K, thus demonstrating the importance of high power factor for power generation applications.

36 MATERIALS SCIENCE↗

Basal-plane thermal conductivity of nanocrystalline and amorphized thin germanane

Recently, we synthesized Germanane (GeH), a hydrogen-terminated layered germanium structure. We employed a four-probe thermal transport measurement method to obtain the basal-plane thermal conductivity of thin exfoliated GeH flakes and correlated the measurement results with the crystal structure. Furthermore, the obtained thermal conductivity increases with increasing temperature, suggesting that extrinsic grain boundary and defect scattering dominate intrinsic phonon-phonon scattering. Annealing a polycrystalline GeH sample at 195 C caused it to become amorphous, reducing the room-temperature thermal conductivity from 0.53± 0.03 W m -1 K -1 , which is close to the value calculated for 3.3 nm grain size, to 0.29± 0.02 W m -1 K -1 , which approaches the calculated amorphous limit in the basal plane thermal conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗