Search NASA⌕ Search

Engineering topics

Broido, David

Publications and source records attributed to Broido, David.

27 records · Page 2

High thermoelectric performance of n-type PbTe 1-y S y due to deep lying states induced by indium doping and spinodal decomposition

Good thermoelectric materials should have high engineering figure-of-merit (ZT) eng , not peak ZT, to achieve high conversion efficiency. In this work, we achieved a good (ZT) eng by optimizing the carrier concentration to improve the room temperature ZT using deep lying dopant, indium, in PbTe 1-y S y . It was found that a room temperature ZT as high as ~0.5 and a peak ZT ~1.1 at about 673 K were obtained in Pb 0.98 In 0.02 Te 0.8 S 0.2 due to a lower thermal conductivity by alloy scattering and Spinodal decomposition. The calculated efficiency could be as high as ~12% at cold side 323 K and hot side 773 K. The approach is expected to work in other materials systems too.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Temperature-dependent thermal conductivity in silicon nanostructured materials studied by the Boltzmann transport equation

Nanostructured materials show low thermal conductivity because of the additional scattering due to phonon-boundary interactions. As these interactions are highly sensitive to the mean free path (MFP) of phonons, MFP distributions in nanostructures can be dramatically distorted relative to bulk. Here we calculate the MFP distribution in periodic nanoporous Si for different temperatures, using the recently developed MFP-dependent Boltzmann transport equation. After analyzing the relative contribution of each phonon branch to thermal transport in nanoporous Si, we find that at room temperature optical phonons contribute 17 % to heat transport, compared to 5 % in bulk Si. Interestingly, we observe a constant thermal conductivity over the range 200 K < T < 300 K . Furthermore, we attribute this behavior to the ballistic transport of acoustic phonons with long intrinsic MFP and the temperature dependence of the heat capacity. Our findings, which are in qualitative agreement with the temperature trend of thermal conductivities measured in nanoporous Si-based systems, shed light on the origin of the reduction of thermal conductivity in nanostructured materials and demonstrate the necessity of multiscale heat transport engineering, in which the bulk material and geometry are optimized concurrently.

36 MATERIALS SCIENCE↗

Experimental study of the proposed super-thermal-conductor: BAs

Recent calculations predict a super-thermal-conductivity of ~2000 Wm -1 K -1 , comparable to that of diamond, in cubic boron arsenide (BAs) crystals, which may offer inexpensive insulators with super-thermal-conductivity for microelectronic device applications. We have synthesized and characterized here single crystals of BAs with a zinc blende cubic structure and lattice parameters of a = 4.7830(7) Å. A relatively high thermal conductivity of ~200 Wm -1 K -1 is obtained, close to those of best non-carbon crystal insulators, such as SiC, although still an order of magnitude smaller than the value predicted. Based on our XPS, X-ray single crystal diffraction, and Raman scattering results, steps to achieve the predicted super-thermal conductivity in BAs are proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrodynamic phonon transport in suspended graphene

Current reports of thermal transport in nanomaterials have demonstrated the breakdown of Fourier’s law through observations of ballistic transport. Despite its unique features, another instance of the breakdown of Fourier’s law, hydrodynamic phonon transport, has drawn less attention because it has been observed only at extremely low temperatures and narrow temperature ranges in bulk materials. Here, we predict on the basis of first-principles calculations that the hydrodynamic phonon transport can occur in suspended graphene at significantly higher temperatures and wider temperature ranges than in bulk materials. The hydrodynamic transport is demonstrated through drift motion of phonons, phonon Poiseuille flow and second sound. The significant hydrodynamic phonon transport in graphene is associated with graphene’s two-dimensional features. This research opens a new avenue for understanding and manipulating heat flow in two-dimensional materials.

36 MATERIALS SCIENCE↗

The Seebeck Coefficient and Phonon Drag in Silicon

We present a theory of the phonon-drag Seebeck coe cient in nondegenerate semiconductors, and apply it to silicon for temperatures 30 < T < 300K. Our calculation uses only parameters from the literature, and previous calculations of the phonon lifetime. We nd excellent agreement with the measurements of Geballe and Hull [Phys.Rev. 98, 940 (1955)]. The phonon-drag term dominates at low temperature, and shows an important dependence on the dimensions of the experimental sample.

36 MATERIALS SCIENCE↗

Study of the Thermoelectric Properties of Lead Selenide Doped with Boron, Gallium, Indium, or Thallium

Group IIIA elements (B, Ga, In, and Tl) have been doped into PbSe for enhancement of thermoelectric properties. The electrical conductivity, Seebeck coefficient, and thermal conductivity were systematically studied. Room-temperature Hall measurements showed an effective increase in the electron concentration upon both Ga and In doping and the hole concentration upon Tl doping to 7 × 10{sup 19} cm{sup –3}. No resonant doping phenomenon was observed when PbSe was doped with B, Ga, or In. The highest room-temperature power factor 2.5 × 10{sup –3} W m{sup –1} K{sup –2} was obtained for PbSe doped with 2 atom % B. However, the power factor in B-doped samples decreased with increasing temperature, opposite to the trend for the other dopants. A figure of merit (ZT) of 1.2 at 873 K was achieved in PbSe doped with 0.5 atom % Ga or In. With Tl doping, modification of the band structure around the Fermi level helped to increase the Seebeck coefficient, and the lattice thermal conductivity decreased, probably as a result of effective phonon scattering by both the heavy Tl{sup 3+} ions and the increased grain boundary density after ball milling. The highest p-type ZT value was 1.0 at 723 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗